Cinelog30 v3 GPS 25x25x8.2
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
- Downloads
- 283
- Likes
- 11
- Rating
- 5
55 models
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
I use the inspiration from another posting of making a US flag by just using color layer changes for the print, using a 0,2 mm layer height to print start with black for a base, at layer 3 change to red at layer 5 change to blue and at…
I needed a simple card insert for "Twilight Struggle," so I made my own. It fits 42-44 cards in Standard American size with premium sleeves (90 microns), measuring 27 cm in height so it sit flush with polish cardbox cutout of Twilight…
I designed the model to be strong but at the same time save filament. I chose draft quality for faster printing. It is a suitable option for this type of purpose. Print, remix and enjoy ;)
Thumb-Screw M5x8 pitch 1.25
Kitchen organizer box 11x15x8 cm I use it for car slleping build Print settings 0,2mm layer 5 walls 15% infill no supports use brim 20mm
Bonsai pot 32 hexagonal curved semi-cascade 135x135x80mm, support is necessary.
230206 Key for outside watertap 8.5x8.5 mm (1/3"x1/3" inch)/ 室外水龍頭鑰匙 / बहर वटरटप क लए कज As you can see in the pictures the old key was broken on the critical cross section, so I hat to get a new one. made my own GL design. Key dimensions…
Kitchen organizer box 21,5x15x8 cm I use it for car slleping build two areas for organising cutlery and other kitchen tools Print settings 0,2mm layer 5 walls 15% infill no supports use brim 20mm
90 Degree Bracket (15x8mm) with cut-out for 2xM3 nuts.
Edit: Added a spring mechanism to hold your business cards in when you have less cards available, this prevents them from falling out.
Medium sized seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 3 trays with the size of 85x85x15mm. The trays fit tight with a 0.25mm gap into the tray holder.…
Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: nut_angle = 0 pulley_t_ht = 12 m3_nut_hex = 0…
Simple egg holder for 7 eggs. Also gift variant ;)
This is a mount adapter for an IP67 junction box to attach to a pole, mast, or anything round-ish using hose clamps or stove pipe straps. Remixed from this excellent model by @quantenquark . The use case would most commonly be for a…
Kitchen organizer box 15x15x8 cm I use it for car slleping build Print settings 0,2mm layer 5 walls 15% infill no supports use brim 20mm
adding space for a 25MM fan
This is a remix from a filament guide for the ender 3 by Neofire, that lets you use M5x8 screws, which are the ones that comes for the spool holder, instead of the original M4x18 screws. Original file:…
This custom spinner is specifically designed for the Consendo RC glider to allow the use of standard folding blades. Unlike the original thinner blades, this spinner supports 9.5x8 folding blades with an 8mm root, which are more…
This is a 15x35x8 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 15mm External diameter : 35mm Width : 8mm Balls : 8 POM ball…
If you are planning to build any sort of trailer base off it this helps to get the general idea on "paper"
A PS4 Camera mount for Sony tv´s This works for the Sony TV 65X8509C And probably others, see the measurements on the photos Print Settings Printer Brand: FlashForge Printer: Guider II Rafts: No Supports: No Resolution: 0.15 Infill: 100…
A remixed version of mikefromnashville's 14mm high model adjusted to fit sleeved 63.5x88mm cards used for Aeon's End. Here are the sleeves used: https://www.sleeveyourgames.com/sleeves/19/aeons-end
This should be printed in the lowest Shore TPU you can print with. I used Ninjatek Ninjaflex 85A. 6 walls will give you a solid print. Circled in black/left in my photo is the original file, printed with a random seam, so the middle is a…
Part of my overhaul of the luftdaten.info - outdoor sensor. I moved the dust particle sensor Nova SDS011 from it's former 'airRohr' housing (a huge, ugly PVC tube) to a standard 85x85 IP65 . Tight fit but works. Now, sitting on the window…
5x8 Reloading Tray 44 Magnum Sized No Supports
Ventilation Grid to screw. Square is: 85x85mm The openings are in a diameter of 60mm Screw holes are d:3mm
Coupling 5x8x26mm NEMA 17 Stepper Motor Coupling 5x12x26mm NEMA 17 Stepper Motor
A garden flower pot made of 4 modular parts, designed to fit around a wooden post (85x85 mm). Great for hanging or climbing plants. Includes drainage holes and prints support-free. Best printed in PETG or ASA for outdoor use. Print one…
Schubladen für mein Wandregal, Große 95mm Lang 80mm Breit und 120mm Hoch Kleinen 97mm Lang 80mm Breit 120mm Hoch
Needed a mold for beeswax that was long enough to use with a heat gun but small enough to be in a drawer. I use it for sealing up wood ends for drying. I verified that the parts interweave correctly in an assembly. To be held together…
Auf Anweisung der Frau passend in den Badschrank designed. PLA, 20%, 3 Wände
Its a generic flat bottomed gridfinity 3x5 bin 8 units high with a lip.
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
I made this box to mount electric window openers' switches, ordered on Aliexpress. There are two versions: 28mm and 44mm depth. 44 is standard, whereas 28 was exact fit for my particular switch. Depth and all other parameters is…
My display console is filled with many spinning NAS hard disks and network equipments. It was getting too warm that it deformed a 5v 80x10mm slim fan placed inside the console to exhaust the heat. So I created an external exhaust fan…
A chip holder for Rubén Torres’ Mini Chips project , holds 128 chips, designed to fit into a 95x80 box. Remix from https://cityhare.studio/3d-prints/, posted with permission. Designed to fit into this box:…
The original Dragon hotend comes with M2.5x8 screws. The Zaribo v2 instead comes with an M3 screw-mount. This .3mf contains negative cylinders in the appropriate places to remove the space that prevents these screws from mounting…
Adapter/mounting cover to attach a Raspberry Pi camera to the Hawke Endurance ED 25-75x85 spotting scope. A display can then be attached to the Raspberry Pi to allow for the spotting scope picture to be displayed. The mount requires the…
Coupleur d'axe 5mm x 8mm, hauteur 30mm Category: 3D Printer Parts
I wanted to be able to get my notepad off the computer desk when I didn't need it, but still keep it quickly accessible. I designed this slide in holder that mounts with double stick tape and has a convenient finger groove for easy…
auf dem Kopf drucken ohne Stützen
This remix focusses on more durability, especially the motor mounts are reinforced, while saving 2 screws per motor. If you don't need the 16x16 spacing use the only 25.5x25.5 spacing version for a few less spots prone to fracture.…
Regenschutz PLA Kopfseitig drucken!
25% infill. no supports, print upside down.
Customized version of https://www.thingiverse.com/thing:73634 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=73634 Print instructions Category: 3D Printing Tests Instructions Using the following…
Uchwyt do montażu obrazka na ścianie.
This remix focusses on more durability, especially the motor mounts are reinforced, while saving 2 screws per motor. If you don't need the 16x16 spacing use the only 25.5x25.5 spacing version for a few less spots prone to fracture.…
This is a mount adapter for an IP67 junction box to attach to a pole, mast, or anything round-ish using hose clamps or stove pipe straps. Remixed from this excellent model by @quantenquark . The use case would most commonly be for a…