Search results: 611

Sort order

Counting matching models…

P
PrintablesMatt B

X-Carve Dust shoe for Dewalt 611 spindle

This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…

Downloads
291
Likes
39
Rating
4.67
P
PrintablesOčko

hook cklip_remix_@MartinBraniko_346116

Print MK3.5_0,2mm structural Prusament PETG infil 0% perimeter 6 (pipe 12mm) perimeter 7(pipe 14mm) Ironing:ON

Downloads
131
Likes
36
Rating
5
P
Printablesthall72

Lego Compatible (61189.dat) Minifig Helmet SW Clone Trooper Phase I

This model is compatible with the lego system.

Downloads
1,036
Likes
112
Rating
5
P
Printablesthall72

Lego Compatible (61190bdat) Minifig Armour SW Clone Trooper Pauldron

This model is compatible with the lego system.

Downloads
927
Likes
74
Rating
0
P
Printablesthall72
Downloads
679
Likes
98
Rating
5
P
PrintablesV1 Engineering

DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC

DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC. Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the…

Downloads
637
Likes
31
Rating
0
P
Printablesthall72

Lego Compatible (61190c.dat) Minifig Armour SW Clone Trooper Tasset

This model is compatible with the lego system.

Downloads
629
Likes
59
Rating
0
P
PrintablesV1 Engineering

DeWalt 611 Tool Mount and Dust Shoe for the LowRider 4 CNC

Tool mount and dust shoe for the DeWalt 660 series palm router and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the old ones though. Best to…

Downloads
588
Likes
35
Rating
5
P
Printablesbobmakes

Router Sub Base for Guide Bushings for Dewalt DCW600/DCW611

I recommend 4 top and bottom layers, 3 walls, 30% infill.

Downloads
542
Likes
82
Rating
5
P
Printablesdsharlet

DeWalt trim router dust shroud (DWP611, DCW600, A27941)

I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge…

Downloads
502
Likes
78
Rating
4.5
P
PrintablesR1CDM

Hikvision DS-KABV6113-RS protective shield

Hikvision protective shield for KV6103/6113 series villa door station.

Downloads
458
Likes
35
Rating
5
P
Printablesthall72

Lego Compatible (61190f.dat) Minifig Helmet Visor SW Clone Trooper

This model is compatible with the lego system.

Downloads
451
Likes
56
Rating
0
P
PrintablesPoty

Oculink ATX external eGPU enclosure for SFF 8612 SFF 8611

My printer settings: Filament = ABS Layer hight = 0.2mm Infill = 16% Support = no Wallcount = 4 Material: 1x ATX Power Supply 1x Used Oculink PCB: cablecc 4X OCULINK (…

Downloads
410
Likes
30
Rating
0
P
Printablesthall72
Downloads
397
Likes
49
Rating
5
P
Printablesloopj

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U

1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…

Downloads
388
Likes
32
Rating
4.8
P
PrintablesErl

Bosch Dishwasher 00611472 Tine Row Clip replacement

My used dishwasher was missing these. STEP included.

Downloads
362
Likes
27
Rating
5
P
Printablesthall72

Lego Compatible (61183.dat) Minifig Hair Swept Back Tousled

This model is compatible with the lego system.

Downloads
362
Likes
38
Rating
0
P
Printablesthall72
Downloads
348
Likes
43
Rating
0
P
Printablesloopj

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1U-ish

Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in order to…

Downloads
341
Likes
22
Rating
4.5
P
Printablespoelstra

Hikvision DS-KV6113 doorbell bracket (45 degrees)

Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…

Downloads
326
Likes
18
Rating
0
P
Printablesthall72

Lego Compatible (61184.dat) Technic Pin 1/2 with Bar 2L

This model is compatible with the lego system.

Downloads
321
Likes
42
Rating
0
P
Printablesthall72

Lego Compatible (74611.dat) Plate 8 x 8 Round with Hole and Snapstud

This model is compatible with the lego system.

Downloads
296
Likes
22
Rating
0
P
PrintablesGage

Adjustable Height CNC Dust Shoe for DeWalt 611

Update 27 April 2020: Thank you to Jcharouz for the awesome 3D printed brush strip alternative. :) https://www.thingiverse.com/thing:3929569 Update 30 Aug 2018: Uploaded STEP file containing the 3 router parts. This dust shoe uses the…

Downloads
293
Likes
43
Rating
0
P
Printablesthall72

Lego Compatible (6117.dat) Minifig Chainsaw Blade

This model is compatible with the lego system.

Downloads
282
Likes
50
Rating
0
P
PrintablesRingbaer

Knipex Cover 7803125/ 7861125

This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…

Downloads
271
Likes
52
Rating
5
P
Printablesthall72

Lego Compatible (6111.dat) Brick 1 x 10

This model is compatible with the lego system.

Downloads
257
Likes
21
Rating
0
P
PrintablesJohny69

Bristles for "Adjustable Height CNC Dust Shoe for DeWalt 611"

These are bristles for the Adjustable Height CNC Dust Shoe for DeWalt 611 by Gage6917. It is very hard to source the bristles in Europe, so I decided to print them as well and it turned out fine. There are two versions uploaded, one…

Downloads
246
Likes
33
Rating
5
P
Printablesthall72

Lego Compatible (61199.dat) Minifig Lightsaber Hilt Short Curved

This model is compatible with the lego system.

Downloads
226
Likes
47
Rating
0
P
Printablesthall72

Lego Compatible (6119.dat) Minifig Helmet Visor Shielded with Antenna

This model is compatible with the lego system.

Downloads
215
Likes
41
Rating
0
P
PrintablesBilliam

Modular Dewalt DWP611 router collar (quick release)

This is a remix of the MPCNC quick release router mount to provide a slightly modular place to mount accessories. Print instructions Fed the original through netfabb to fix geometry issues. Removed the actual frame mount in the rear to…

Downloads
193
Likes
39
Rating
4
P
PrintablesJohn

X-Carve / Shapeoko DeWalt 611 Router Dust Boot (69mm)

Here's links to the things I got on amazon to put in the slot at the bottom, and optionally reinforce the screw hole. The screws used were the ones that came with the CNC, but it's a 5mm threaded screw hole in the model, so any m5 should…

Downloads
182
Likes
20
Rating
0
P
PrintablesAesculapius

Dewalt DPW611 Router Bushing Plate/Base

I picked up a set of Rockler router bushings which fit standard sized routers well. I also have a DPW611 compact rounter. Sadly, the plate that comes with that can't take bushings. The model is a simple circular plate that has matching…

Downloads
181
Likes
20
Rating
0
P
PrintablesRem

Drip Tray Replacement for Black + Decker Electric Griddle (GD1611B)

This is a drip tray replacement for a Black + Decker Electric Griddle (GD1611B). If your griddle looks similar to this exact griddle, this replacement may work for you with some slight editing! Print instructions It is recommended to…

Downloads
177
Likes
6
Rating
0
P
PrintablesRoss

Dewalt DPW611 Trim Router Bushing Base Plate

Replacement base plate for the Dewalt DPW611 trim router that will accept standard 1-3/16" bushings. Model has been opened up to provide decent visibility and airflow. Same thickness and mounting holes as the original base plate. Slightly…

Downloads
176
Likes
24
Rating
5
P
Printablesthall72

Lego Compatible (6112.dat) Brick 1 x 12

This model is compatible with the lego system.

Downloads
158
Likes
16
Rating
0
P
Printablesjmynheir

DWP611 Router baseplate

I modeled the baseplate so I could use a jig setup by screwing a 1x3 board and route a radius. There are 2 stls, a stock baseplate, and a modified baseplate. I also include the Blend file if you want to modify further. Category: Machine…

Downloads
158
Likes
24
Rating
0
P
PrintablesBilliam

CNC pen holders for Dewalt DWP611 mount

Collection of failed and successful pen holders attached to my my Dewalt DWP611. Print instructions A collection of pen holders I've tried attached to a Dewalt DWP611 (see parent project for mount). This is a work in progress Currently,…

Downloads
150
Likes
15
Rating
0
P

Display Stand for LEGO 31140 Rainbow Falcon / 40611 Millennium Dragon / 31124 Venator Z (MOC by Luke_Bricks82)

Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…

Downloads
147
Likes
29
Rating
5
P
Printablesthall72
Downloads
133
Likes
15
Rating
0
P
PrintablesWar_Crafts-3d

Italian Ab-611 Armored cars

Description I refined angles on this model through importing it to sharp3d and blender. I also wanted to make a print profile available to the public. Changes where made in the size and angles. I specifically wanted to fix the back to…

Downloads
116
Likes
17
Rating
5
P
PrintablesBLawl

Netgear Hotspot Case (MR6110) - Nighthawk M6

About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…

Downloads
114
Likes
9
Rating
5
P
Printablesslynn1324

DWP611 CNC Dust Shoe

Dust Shoe for my CNC Router with a DWP611. Fits a Ridgid shop vac hose. Assembly of the top requires 2 long 5mm socket cap screws and 5mm nylock nuts. I measured and cut down 90mm cap screws with a hacksaw to roughly 77mm so that they…

Downloads
112
Likes
11
Rating
0
P
Printablesthall72

Lego Compatible (61193.dat) Torso Mechanical Magna Guard

This model is compatible with the lego system.

Downloads
110
Likes
30
Rating
0
P
PrintablesGeorgi

Trigger Lock for ZKM-611

The trigger lock I made allows to lock the trigger of the rifle as per the requirements for keeping and transport weapons. For locking you can use a simple suitcase small padlock, as I use, or you can use any padlock that fits. No support…

Downloads
107
Likes
10
Rating
0
P
PrintablesDavidVelasco

LG Air Conditioner Remote Back Cover AKB73315611

A friend lost the battery cover for the remote of his LG Air Conditioner (model no. AKB73315611), so I decided to replicate the model using the other remote he has. It is better to print it in vertical or with one side in the hot bed…

Downloads
105
Likes
6
Rating
0
P
PrintablesJosh

Dewalt DWP 611 router circle buddy

This is a simple model that can be mounted onto the DeWalt router. I have included holes for 6 to 18" holes. The name should not be changed. I am offering this model for personal use only. The orange jig pictured here is the first one I…

Downloads
103
Likes
18
Rating
0
P
PrintablesXenoBlaster

Albrecht AE 6110 Car Cup Holder

Albrecht AE 6110 Car Cup Holder this is a Remix from: https://www.thingiverse.com/thing:2517549

Downloads
103
Likes
15
Rating
0
P
PrintablesMaggus

Holder for Panasonic Hair Trimmer (ER1611)

I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…

Downloads
101
Likes
11
Rating
5
P
Printablesdwp

Phillips Sonicare HX6110 Charger Mount

New toothbrush, new mount needed. Counterbore is for #8 size tapping screw, but I'm sure many will fit.

Downloads
99
Likes
12
Rating
5
P
PrintablesVaclav

Adjustable leg (00611942) for SIEMENS / BOSCH dryer

The original leg is quite fragile and very expensive. So I made it by my own and you can see on the pictures the original (left) vs. 3D printed (right).

Downloads
98
Likes
4
Rating
0
P
PrintablesOld Machinist

DeWalt DWP611 Router Dust Shoe Vac Hose Adapter

Adapter fits hose and dust shoe fairly tight, might want to reduce scale slightly. First print worked well enough for the task that I didn't feel the need to print another. Printed in PETG for my first piece.

Downloads
89
Likes
28
Rating
4
P
PrintablesPuffi74

Kühlschrank AMICA Modek KS15611R

Hier der Schließer für das Kühlfach in verstärkter Bauweise.

Downloads
89
Likes
2
Rating
0
P
PrintablesPavel

Hecht 611 ventilátor, motor fan

Vyzkoušené, funkční

Downloads
88
Likes
4
Rating
0
P
PrintablesAlex_NL

Crystal Chandelier Pot remix to fit IKEA 104.611.47 hanging plant

In order to fit the IKEA plant I resized the pot and also removed the vase mode and turned it into a regular print. It now perfectly fit the IKEA plant item number 104.611.47.

Downloads
86
Likes
12
Rating
5
P
PrintablesThomas

Remington PG6110 Beard Trimmer/Shaver Cut Length Attachment

I lost my 1.5mm attachment for my beard trimmer so instead of buying a whole new trimmer, I just printed a new one from scratch. The attachment is used for setting the length of trim and fits onto the battery powered shaver by snapping…

Downloads
82
Likes
3
Rating
0
P
PrintablesJeremy68

étui pince coupante knipex 7861125

étui pince coupante knipex 7861125

Downloads
79
Likes
10
Rating
4
P
Printablestomreeb

Motorola MB8611 Wall Mount

Simple wall mount shelf for a Motorola MB8611 cable modem. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: any PLA any Category: Organization

Downloads
75
Likes
7
Rating
5
P
PrintablesM.O.U.E.

Collet Wrenches for DWP611, DW660 and PR20EVS

Simple hand wrenches for the Dewalt 660, 611 and Bosch PR20EVS routers works well with 2.5 inch endmills and v bits. The tip of the tool needs to be smaller than the nut. **Dec 2, 2020 updated fit and added .25 inch bit shank holder.…

Downloads
75
Likes
14
Rating
0
P
Printablesflbdesign

Front tank bracket 17611437000 for Honda XLR XLS 125 1979-1990 Honda

Front tank bracket for Honda XLR XLS 125 1979-1990 Honda Original part Honda: 17611437000 Printing in TPU - PETG - ASA 100% infill

Downloads
73
Likes
10
Rating
0
P
Printablesthall72
Downloads
71
Likes
13
Rating
5
P
PrintablesMurdogk

Basic-brick 1 lego 3004 3008 3009 3005 3010 6112 2465 3622 6111

Bloques compatibles con sets lego Basic-brick

Downloads
70
Likes
17
Rating
0
P
Printablesthall72
Downloads
70
Likes
15
Rating
0
P
PrintablesKieran E

Magicshine MJ-6118 Bottle Cage Adaptor

Holds your Magicshine MJ-6118 battery in a standard MTB bottle cage location! The design has small detents to help hold the battery in place but still lets it slide out easily for charging. Optionally includes a cable routing channel if…

Downloads
69
Likes
8
Rating
5
P
PrintablesFlurbb

Makita Circular Saw Hanger XSH03 DSS611

I can't mark it as a remix of a model from Thingiverse but this is a remix. Designed to fit #8 wood screws. Based on https://www.thingiverse.com/thing:5240190 by Brodo78 The original runs all the way down the shoe of the saw and it felt…

Downloads
66
Likes
6
Rating
0
P
PrintablesCosmin

Bosch Unlimited Series 6 Vacuum repair BCS611 maybe 7 and 8th series

My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts. The V1 had to…

Downloads
62
Likes
6
Rating
0
P
Printablesthall72

Lego Compatible (6611.dat) Technic Angle Connector 4-Way 60 Degree

This model is compatible with the lego system.

Downloads
60
Likes
17
Rating
0
P
PrintablesMike E

Shop Vac or 2 1/2 dust collection hose to Ryobi P611 Cordless Hand Planer

Needed a dust collection adapter to attach my Ridgid shop vac to my Ryobi P611 Cordless Hand Planer and only one I could find was too small for a standard shop vac hose. Also designed to fit 2 ½ dust collection hose on outside of fitting.

Downloads
59
Likes
10
Rating
0
P
PrintablesLaKoS

Ikea Skadis Knipex Snipper 7861125 holder

This is my version of the Knipex Skadis holder. Did a few changes to it, so it can be printed in the standing Prints very easy…only the peg needs support, the rest can be printed without supports. Printed it in 0.2mm layer height.

Downloads
58
Likes
7
Rating
5
P
Printablesthall72
Downloads
56
Likes
12
Rating
0
P
Printablesdim20

Suzuki Ignis Center Air Vent Flap Linkage (73611-81A00)

This part should also fit for other Suzuki models such as the Jimny and possibly Wagon R+ related cars (i.e. Vauxhaull/Opel Agila) of the same era. For any broken off flap mount points, one can use small screws of similar diameter, set…

Downloads
55
Likes
10
Rating
5
P
Printablesfmriguy

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U - 10” Rack Edition

This mount will allow you to attach a Motorola cable modem (models MB8611 / MB8600 / MB7621) horizontally and store in a 10-inch networking rack. Unscrew the base from the modem, lay on its side and attach screws through the side of the…

Downloads
55
Likes
5
Rating
0
P
PrintablesJay 974

Dewalt 611 dust shoe for CNC

Needed a dust shoe for a Workbee Z1 fitted with a Dewalt 611 router. Found a design i liked but it did not leave enough clearance on the sides and loosing 20mm on each side of the router was a bummer.…

Downloads
55
Likes
11
Rating
0
P
PrintablesMichael Kehm

Dewalt DWP611 mounting plate for Craftsman 25444 router table

This mounting plate lets you use a Dewalt DWP611 router with a Craftsman 25444 router table. The mounting plate is 1/4 inch thick. Same as the base plate that comes with the router. To mount the plate to the router table I used M4-20…

Downloads
52
Likes
5
Rating
0
P
PrintablesTyler Mode

Shop-Vac to Ryobi Planer (P611)

This adaptor allows my Shop-Vac to connect to my Ryobi Planer (P611). The bag that comes with the planer is awful and clogs up almost immediately. The adaptor fits on the outside of the planer and to the inside of the Shop-Vac to prevent…

Downloads
48
Likes
11
Rating
0
P
PrintablesJay 974

CNC DUST Shoe Dewalt 611

I needed a compact CNC dust boot for the Z1 fitted with a Dewalt 611 Only hardware needed are : 2ea M6x20 hex screws ( the M6 female threads are printed in the main body) 4ea 10x3 magnets (optional, i did not receive them yet but the boot…

Downloads
48
Likes
5
Rating
0
P
PrintablesKiko Lobo

X-Carve with Dewalt 611 Spindle - JTech Front Laser Mount

This is a custom laser cutter/engraver mount for the Dewalt Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). This will mount your…

Downloads
48
Likes
3
Rating
0
P
PrintablesMarco Maker

Inventables X-Carve universal Dewalt 611 mounting bracket

Prusament PETG Prusa Orange 250°C Extruder, 85°C Bed Nozzle 0,4mm Additionally, you need: 9x Ruthex M4 thread inserts

Downloads
44
Likes
9
Rating
0
P
PrintablesGeorge Bobeck

Lionel Canister 6112 (Approximation)

This is a quickly thrown together rough model of a Lionel Canister 6112. The model isn't quite accurate to the original canister, but it is close enough to pass from a distance, and is better than running nothing in the car. I printed…

Downloads
44
Likes
5
Rating
0
P
Printablestinyspacewhale

Knipex 7861125 Skadis Holder

A simple holder for a Knipex 7861125 Sidecutter. Made for the Ikea Skadis wallmount. Uses the excellent T-nut system.

Downloads
44
Likes
4
Rating
0
P
PrintablesRGWoodVA

Dewalt 600 or 611 Palm Router - Makita Track - Robust Model

This robust jig attaches the corded (DWP611) or cordless (DCW600) Dewalt 1.25hp palm router to Makita track rail. Features: A. The router attaches to the jig using the original plate screws. B. I drew the Makita track profile and then…

Downloads
42
Likes
15
Rating
0
P
PrintablesKiko Lobo

X-Carve with Dewalt 611 Spindle - JTech Side Laser Mount

This is a custom laser cutter/engraver mount for the Dewalt Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). This will mount your…

Downloads
39
Likes
3
Rating
5
P
PrintablesRutger de Knijf

ICY BOX USB Hub Mount for IB-AC6110

Can be printed without support on side or bottom. On bottom it will have some hanging strands but that's not actually problematic or visible once it's mounted. Print settings (PLA, 0.2 mm layers, Bambu Studio auto-orientation): no…

Downloads
36
Likes
1
Rating
0
P
Printablescasey

9x9 in Skeletonized Router Sub Base for Dewalt DCW600/DCW611

It is the maximum size of plate that my Bambu P1S can print.

Downloads
35
Likes
5
Rating
0
P
PrintablesChuffine

Hakko 611 Solder Spool Bushing

Print at as high a resolution as you can to get the best results on the fillets. Resin might be a good option. I hit mine with a 1.5mm drill after print to make a clean channel.

Downloads
33
Likes
7
Rating
3
P
PrintablesTailslide

LowRider V2 - DW611 Pen Holder

This is a pen holder that snaps into the dewalt router plate that is standard for the low rider V2. Just pull out the router (or retract it if you have a short pen) and snap in the disc from underneath. Compatible with my Z-Probe so it…

Downloads
31
Likes
7
Rating
0
P
PrintablesGR3D

Bosch Dishwasher 00611472 Tine Row Clip replacement REMIX

Material: ABS Handle modified with a cutout. Be careful during assembly, as the “claw” may break off during adjustment. The printout requires supports.

Downloads
31
Likes
3
Rating
0
P
PrintablesBilliam

Dewalt DWP611 CNC pointer attachment

Small angle bracket to hold a roughly 8mm diameter point. Print instructions This is designed to help measure travel distance on the X and Y axis when setting up and tuning a CNC router. Uses 1 m3x8 screw to hold the pointer in (a nail),…

Downloads
31
Likes
4
Rating
0
P
PrintablesJeffeb3

Neje 40640 Dewalt DW611 Mount

This part is to mount the Neje 40640 in the base of a DW611 router. I have the DW611 router and base installed on my V1 Low Rider (version one). This lets me take the router out, put the laser diode in, and then just add wiring. It also…

Downloads
28
Likes
6
Rating
0
P
PrintablesKieran E

Magicshine MJ-6118 3D model

A simple STEP file of a Magicshine MJ-6118 battery pack. I'll tell you right now that it's not millimeter-perfect, but it was good enough to make a battery mount for my bike (with a 0.25mm offset).

Downloads
28
Likes
2
Rating
0
P
PrintablesChristiaan

Front Tank bracket cushion 17611437000 for Honda NX 250 300 XLR XLS 125 ATC NSR 50

I was missing one of the two tank cushions, printed in TPU. It is a replacement for 17611-437-000. It should fit a lot of old Honda's including: nx250 atc250 nsr50 xls125 + more.

Downloads
27
Likes
4
Rating
0
P
Printableseried

Improved DeWalt 611 Air Diffuser for X-Carve /w lock button

Redirects the air flow of the router to avoid blowing directly on the work piece and also extends the lock button for an easy tool change. The original diffuser was nice but I added some improvements: -The base is 2 mm instead of 4 mm.…

Downloads
27
Likes
4
Rating
0
P
PrintablesApocrathia

DeWalt DWP611 80mm Spindle Mount Adapter

As I was building my Onefinity CNC machine, I realized that I didn't want to use the recommended Makita router for a number of reasons: Brushed motor No LED lighting User reliability reports However, the DeWalt router that I wanted to use…

Downloads
27
Likes
3
Rating
0
P
Printableshugabaloo

Dewalt 611 CNC Tramming Tool

CNC Tramming Tool remixed from V1Engineering to fit the Dewalt 611's spindle nut.

Downloads
27
Likes
1
Rating
0
P
Printablesrussman

Drill Press Dremel Adaptor 6117

I picked up a cheap drill press made for electric drills that came with a bunch of adapters but none fit a Dremel. I picked up a cheap drill press made for electric drills that came with a bunch of adapters but none fit a Dremel so I made…

Downloads
25
Likes
10
Rating
0
P
PrintablesBTHRE3D

Hair Straightener Holder (combo of 161167 and 421296)

Merged the ideas of @JBear40_ and @Daniele for a adhesive based slanted hair straightener holder. Tested and works with Revlon Straightener Model RVST2174

Downloads
24
Likes
3
Rating
0
P
Printablesclusterfuggles

Dual Solder Spool Reel (inspired by Hakko 611-2) Includes NEW V2

I have a Hakko 611-2 dual solder spool reel and I love it so I created this printable version. Like the Hakko stand you can reverse the wire guide on the bottom spool so the stand can be used from the front and the back. Printing…

Downloads
24
Likes
5
Rating
0
P
PrintablesBrokenPoet

Dewalt DW611 Super-PID Tachometer Holder

I use a DeWalt DW611 Router as a spindle on my Shapeoko 3, and also use a Super-PID controller to control the speed of the router. The Super-PID controller requires an IR Tachometer to be mounted in such a way to see the spindle, which…

Downloads
24
Likes
4
Rating
0
P
Printableshugabaloo

Lowrider 3 Dust shoe for the Dewalt 611

I mashed Philipp's Improved dust shoe design with the original V1E shoe so it fit the Dewalt 611 and could use the bristles from the the original. Philipp's design is for a different tool and while I did get it to fit and test it, the…

Downloads
24
Likes
5
Rating
0