Search results: 660

Sort order

221 models

P
Printablesian123411

Dewalt DCN660N Nail Gun Hanger

This hanger will hold the Dewalt DCN660N 2nd fix finishing nail gun printed in PLA can be done with PETG Nylon, Carbon fibre ect… depends on your preference with 50% infill and the perimeters at 4

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
32
Rating
5
P
Printablesthall72
Downloads
895
Likes
47
Rating
5
P
Printablesmt_benno

2021 Aprilia RS 660

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Downloads
838
Likes
29
Rating
1
P
PrintablesV1 Engineering

DeWalt 660 mount for the MPCNC Primo

Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…

Downloads
830
Likes
42
Rating
5
P
PrintablesLev 3DD

Volumetric Flow Test 200-660mms

*READ BEFORE PRINTING/DOWNLOADING* Volumetric Flow Test 200-660mms. Based off of my previous slower flow test. Use Soft Fever Bambu Studio. I use the same methodology from my Slower Volumetric Flow Test model to figure out flow, so start…

Downloads
687
Likes
23
Rating
0
P
Printablesthall72

Lego Compatible (26601.dat) Plate 2 x 2 without Corner

This model is compatible with the lego system.

Downloads
592
Likes
36
Rating
0
P
PrintablesRene De91

Stand for Fritzbox 6660 cable

Vertical stand for the Fritz!Box 6660 cable. Inspired by https://www.printables.com/model/43735-fritzbox-7590-stand If you have a different model check if it has the same housing. The diameter should be around 54.5mm

Downloads
571
Likes
37
Rating
5
P
Printableserin

TB6600 DIN Rail Clip Mount

DIN rail mount for TB6600 stepper motor driver

Downloads
522
Likes
32
Rating
5
P
Printablesthall72
Downloads
488
Likes
32
Rating
0

Sony Xperia Z (C6602/C6603) Cover / Case

Sony Xperia Z (C6602/C6603) Cover / Case Wide corners and near perfect fit. Has slightly overlapping face so the phone screen never touches surface when up-side-down.

Downloads
480
Likes
26
Rating
0

Aprilia Tuareg 660 Storage Compartment

Small storage compartment for Aprilia Tuareg 660 that can be installed next to the lithium battery. Suitable for model year 2026. Maybe also 2025? Perfect for storing insurance papers (and some tiny tools). The box doesn't have any lid…

Downloads
431
Likes
8
Rating
0
P
Printablesthall72

Lego Compatible (26603.dat) Tile 2 x 3

This model is compatible with the lego system.

Downloads
429
Likes
25
Rating
0

(Option 2 of 2) DIN Rail Clip-Mounts for TB6600 Microstep Driver (v2.0.0 & 2.0.1)

Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…

Downloads
422
Likes
25
Rating
5
P
Printablestowilab

TB6600 DIN Rail mount

DIN Rail Halter für ein TB6600 Treiber Modul. Das Modul kann direkt verschraubt werden. Es werden keine Abstandshalter benötigt.

Downloads
419
Likes
49
Rating
4
P
Printablespotatopirate

TP-Link EAP 610, 620, 660, 670 Mount

Junction box mount for v1 TP-Link EAP 610. It should work for the 620, 660, 670 or any other of the EAP models with the same mounting system. The included drywall mount for v1 EAP 610 didn't work for a single gang ceiling junction box the…

Downloads
396
Likes
32
Rating
0
P
Printablesmchangcreative

Fishing line spooler (for 600-660yd spools)

09/17/22 update: If the wingnut continues to loosen when the spool spins, you can rotate the base 180% and flip the fishing line spool 180%. Or you can add an extra jam nut before screwing on the wing nut. After overpaying for 200yd…

Downloads
362
Likes
88
Rating
5

(Option 1 of 2) DIN Rail Clip-Mounts for TB6600 Microstep Driver (v1.0.5)

Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…

Downloads
337
Likes
20
Rating
0
P
PrintablesMüdequadrat

Vertical Stand for Omada EAP 6 Series (V1, EAP 670, 660, 650, 620, 610.)

This is a vertical stand for APs from TP-Link Omada EAP 6 series version V1 including EAP 670, 660, 650, 620, 610. Usually these APs are required to install on the wall or ceiling and one have to drill holes in the wall. Since I just want…

Downloads
325
Likes
19
Rating
5
P
Printablesthall72
Downloads
296
Likes
24
Rating
0
P
Printableslewosh

Garmin Zumo 660 Sunshade

No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily…

Downloads
291
Likes
19
Rating
5
P
Printableschrisvgt

Fritzbox 6670/6660 Stand

Seriously, I only needed the stand to place the Fritzbox 6670 vertically in the cabinet due to lack of space. The model should also work for the Fritzbox 6660.

Downloads
241
Likes
9
Rating
0
P
Printablesmakko

OV3660 Camera Mount to Flashforge Adventurer 5M (AD5M)

Cheap webcam implementation to AD5M Flashforge sells camera kit, but it's kinda expensive in here, so i wanted to go to cheaper route. You need: (Maybe) Klippered AD5M - Haven't tested with the original firmware so it might work or it…

Downloads
239
Likes
48
Rating
5
P
PrintablesSam Schultz

TP Link Omada EAP 6 Series (660,670) Wireless Access Point Mount Plate

TP Link Omada EAP 6 Series (660,670,650,610) Wireless Access Point Mount Plate. This is a simple model to allow mounting of a TP Link access point if you either lost or dont have the original wall/ceiling plate for your EAP. I lost one of…

Downloads
227
Likes
13
Rating
0
P
Printablesohanhi

AVM FRITZ!Box 6660 Cable Vertical Stand

This minimalistic vertical stand lets the FRITZ!Box 6660 cable modem stand fully upright like a skyscraper, instead of the long edge up like the other models I could find. This stand will friction fit around the modem and provide a flat…

Downloads
205
Likes
10
Rating
5
P
PrintablesCodecat

SONY A6000 Series | Thumb Grip with Support Handle | a6000 a6100 a6300 a6400 a6500 a6600

a6700 Users - The Grip does not fit because of the reworked mode-switcher, use the following remix by @shoyler_79369 (UNTESTED) : Extended Grip Printing instructions: Use supports when printing the model, otherwise you will not be able to…

Downloads
195
Likes
21
Rating
5
P
PrintablesSuddoku

ASUS PRIME B660M-A WIFI D4 IO SHIELD

Print in PETG, PLA is to fragile and this print is very thin. Print in 0.16 layer

Downloads
191
Likes
6
Rating
0
P
Printablesspansammler

Gigaset CL660 Beltclip V2

Updated V2 with improved stability Material: Prusa PC Blend, Polycarbonate Infill: 100% Support: No Rafts: Yes 15mm outside only

Downloads
190
Likes
9
Rating
0
P
PrintablesFlaszynski

Aprilia Tuareg 660 2022 Light Switch Cover

This part is design to prevent incidentally pushing high beam switch in Aprilia Tuareg 660 motorcycle.

Downloads
188
Likes
5
Rating
5
P
PrintablesRoss

TP Link EAP660 HD Wall Mount Bracket

This bracket attaches to the wall via the screw holes in a standard US outlet box where you would normally screw in an outlet or switch. It then attaches to the WAP (wireless access point) using the bracket that is included in the box…

Downloads
166
Likes
3
Rating
0
P
PrintablesPrintiBY

Aprilia RS660 Side Premium Winglet

Aprilia RS660 Side Winglet. Print in Place

Downloads
165
Likes
7
Rating
0
P
PrintablesLuBi Tech

Esp82660.96 zoll oled display enclosure [NO SCREWS NEEDED]

A simple enclosure for Esp8266 board with 0.96 zoll oled display. Nedeed parts: only a 3D FSM printer :) Print tips: no support needed print the lid with the top laying on the print bed the lid sits tight. Don't hesitate to use some force…

Downloads
163
Likes
11
Rating
5
P
Printablesiop22

OV3660 Camera Module Case

2 cases for the OV3660 3MP camera board/module with the small lens. Probably fits other board of the same form factor but I can't guarantee as I only have the ov3660. Minimal case is as small as possible and only includes a hole for the…

Downloads
162
Likes
12
Rating
5
P
PrintablesMrBunsy

OO Gauge Wide Couplings: X9660, X8031, Dovetail. Hornby, Dapol, Bachmann

This configurable coupling generator (couplings_parametric.scad) is capable of producing an X8031 (Hornby/Bachmann), X9660 (Dapol/Hornby/Airfix) and Hornby dovetail (hornby's NEM socket socket), with and without hooks. Usually the real…

Downloads
158
Likes
16
Rating
0
P
PrintablesMike

Lego Compatible 2 x 3 Tile (26603)

Kids Lego set was missing a piece, so I made this to fit. Printed using a 0.2mm layer height with a brim (to prevent any warping). Printed better for me when multiple instances were done at the same time. Fits very nicely, but the PLA I…

Downloads
157
Likes
7
Rating
0
P
Printablesadmin

3dp fc660 v3 OLED hand wired mechanical keyboard

This is a hand wired keyboard. Please be familiar with the process of hand wiring before undertaking this project. Inspiration for this project comes from this hero . Features 5° typing angle Low profile front height Supported layouts:…

Downloads
149
Likes
46
Rating
0
P
PrintablesMurdogk

lego 3070 3069 63864 2431 6636 4162 14719 3068 26603 87079

lego 3070 3069 63864 2431 6636 4162 14719 3068 26603 87079

Downloads
144
Likes
3
Rating
0
P
PrintablesIvoryHammer

Tire Pen Cup - Falken RT660

I saw a model of some stacked tires and decided to do some modeling practice and make a cup of my own. This cup features the Falken Azenis RT660's which I really enjoyed when doing trackdays and driving around mountain roads. HMU if you…

Downloads
142
Likes
19
Rating
5
P
PrintablesStefan

OV3660 camera mount for Voron v0

This is a simple mount for the OV3660 USB webcam on the Voron v0. The mount is designed to fit in the front left corner; you can mirror it if you want to place your camera on the right instead. Required hardware is: M2x6 screws and nuts…

Downloads
142
Likes
16
Rating
5
P

Asus 1660 Super Phoenix 120mm Fan Frame Mod

Intro It was pointed out to me on Reddit that this might be compatible with any other GPU with the “Sunflower” style heatsink that the 1660S Phoenix has, e.g. the Zotac 1650. I've included step by step instructions below. This is a mod…

Downloads
138
Likes
5
Rating
0
P
PrintablesLemlurkerman

Jobo c6600/LPL 6700 enlarger negative carriers 35mm wide to 6x9

simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…

Downloads
135
Likes
7
Rating
0
P
PrintablesIlan Kushnir

OV3660 Camera case + ender 3 s1 bed mount

a case for camera OV3660 and ender 3 s1 bed mount

Downloads
134
Likes
7
Rating
0
P
Printablessamugi

Name Plate for Shimano ST 6600 Ultegra

Replacement Name Plate modeled for Shimano ST 6600 Ultegra

Downloads
130
Likes
4
Rating
5
P
PrintablesV1 Engineering

DeWalt DW660 CNC Tramming Tool

DW660 perpendicularity tester A more perpendicular tool cuts better! Tramming tool. Print instructions Unassociated tags: dw 660, mostly printed cnc Category: Parts

Downloads
130
Likes
23
Rating
0
P
Printablesjaredandrews

Stanley 66052 6-Piece Precision Screwdriver Set Holder - Honeycomb Storage Wall

This is a holder for the Stanley 66052 6-Piece Precision Screwdriver set. It is meant to attach to insert-empty.stl and go on your Honeycomb Storage Wall. OnShape document

Downloads
123
Likes
18
Rating
4.67
P
Printablesgrimmet

Aprilia Tuareg 660: CarPlay Mount for the GPS-Bar

On AliExpress and other places you can find a waterproof 5 inch touch screen with wireless CarPlay for motorcycles - this thing here . This is my mount for the navigation bar of my Aprilia Tuareg 660. Two pieces: One gets screwed to the…

Downloads
122
Likes
9
Rating
5
P
PrintablesSierra

52mm thread disc for SmallRig Lightweight Matte Box 2660

As I said, mattebox doesn't come with 52mm filter thread, smallest one is 67mm I think. Anyways, it works and now I can use my lens wide open

Downloads
120
Likes
27
Rating
0
P
PrintablesV1 Engineering

Mostly Printed CNC -Add On- Dewalt DW660 Mount -Burly-

Tool mount for the MPCNC , all three sizes Change log 10/21/18 Made them a bit more Burly 5/25/16 to fit the universal tool mount. Make sure "up" is mounted right side up. License clearly defined Please have a look a the relaxed "NC"…

Downloads
119
Likes
10
Rating
0
P
Printablesadmin

Clueboard / FC660m 66% Mechanical Keyboard v2

Before you print 3dp fc660 v3 OLED hand wired mechanical keyboard Here's a more recent version of this keyboard with optional OLED support. Printing Before printing, make sure to orient the pieces correctly. Flip the plate pieces upside…

Downloads
118
Likes
29
Rating
0
P
Printableselcubano

DIN Rail Clip-Mount with M4 nut for TB6600 - Remix

Added M4 nut space to the mount. M4 nuts should be a tight fit to avoid adhesives. Printed with PETG at 0.25mm resolution.

Downloads
114
Likes
11
Rating
0
P
Printableskampfschläfer

Customizable Honeycomb Light Grid for Neewer NL-660

Light grid with customizable pattern and density. By making use of the infill pattern trick (0 bottom and top layers) you can choose which pattern to use for the light grid. And how many channels it should have. Modifying the openscad…

Downloads
114
Likes
27
Rating
0
P
Printablesstrdst / lou

OV3660 camera housing

Simple and functional two part housing for OV3660 type cameras. The housing front / main body comes in two variants. One with the arm mount on the side, one with the mount at the bottom. If you need the mount on the other side you can…

Downloads
108
Likes
12
Rating
5
P
PrintablesMatzetas

Frame Plug for Yamaha XTZ 660

Modeled after the original part number 3LD-2219X-01 (45 in schematic). I printed mine in TPU and it fits well without glue. Step file is uploaded to adapt size and tolerance. Image source: https://yam-shop.de/Yamaha-Genuine-Ersatzteile

Downloads
104
Likes
8
Rating
0
P
PrintablesDerRaven

Synology RT6600ax screwless mount

I wanted my router to be installed on the outer side of my servercabinet, screws are therefore not possible. Therefore I created a very simple but 100% fit wallmount for Synology RT6600ax Router. Entire size is designed to fit exactly one…

Downloads
103
Likes
3
Rating
0
P
PrintablesDanny

Bosch BC 660 Battery Charger Mount

To attach the battery charger wall-mount to the charger itself you need to remove the three originals screws from the back of the charger and replace them with two number #6 screws X 2 inches long for the top holes and one #6 screw x 1…

Downloads
103
Likes
2
Rating
0
P
Printablesmatthijsbos

Wall Shelf for Waterpik WP-660

Simple wall mounted shelf for Waterpik WP-660 water flosser. Mounted on the wall using a single wood screw. I had good results printing with the back on the bed. Created a small cylinder volume of 100% infill behind the screw head.…

Downloads
100
Likes
12
Rating
0
P
Printables3DPrintsBF

Gigaset CL660HX Phone Stand

Simple Phone Stand for the Gigaset CL660HX in 2 different Styles.

Downloads
97
Likes
4
Rating
0
P
Printableslatriple C

Soporte para Drivers TB6600

Soporte para Drivers TB6600 Category: Other

Downloads
96
Likes
7
Rating
0
P
PrintablesDC

MSI GTX 1660 Ti PCI bracket

Guy tried to remove the PCI bracket to get the card to fit in a computer it was never going to fit in, lost the bracket, and wanted to trade it in for a smaller form factor card. I felt bad for the guy so I traded it in and made a bracket…

Downloads
96
Likes
5
Rating
5
P
PrintablesJonny

DHS660/680 Wall Holder

This wall mount can be printed upright, the bridge between the two rails feels a bit flimsy, but that doesn't matter as soon as all 4 screws are in. It works just fine, printing this model in PLA .

Downloads
94
Likes
10
Rating
0
P
Printablesjmillerfo

DeWalt 660 Router Mount & Dust Collector

This accessory is an add-on to V1 Engineering's MPCNC Primo version CNC machine and provides a mount and dust collection attachment for the DeWalt 660 Router. See https://www.thingiverse.com/thing:4493589 . Here is a short animation…

Downloads
94
Likes
16
Rating
0

Givi Tanklock adapter für Triumph Tiger Sport 660

Halter für Givi Tankrucksack. Ersetzt Givi Halter BF69 Befestigung am Tank mit längeren Schrauben. Befestigung des Givi Ringes mit 4 STK M5x10 6.7.24 Update. Verstärkung um das Schraubloch da ich meine Halterung beim Absteigen gekikt und…

Downloads
89
Likes
12
Rating
0
P
Printablesindecay

Triumph Daytona & Trident 660 Rear Foot Peg Plate Cover Blank

This is a blanking plate for use on a Triumph Trident 660 motorcycle when removing the rear foot pegs. This is designed as an alternative to the R&G Blanking Plate BLP0047BK, which works on the Triumph Trident 660 and the '15-19' BMW…

Downloads
85
Likes
4
Rating
0
P
PrintablesS 3D Print

GIGABYTE GTX 1660 SUPER OC

BACK PLATE 3D PRINT 2 COLORS AND LASER CUT TO ADD ARGB LIGHT

Downloads
82
Likes
9
Rating
0
P
Printableswerz 99

Multifix ASD1660 Model

A working model of ASD1660 Toolholder from PeWe-Tools. Created for Holding a Dial Indicator. This will fit in a Multifix AS16. See here: https://www.prusaprinters.org/prints/134855-holder-for-dial-indicator I recommend printing all the…

Downloads
80
Likes
11
Rating
0
P
PrintablesChris Rios

Waterpik Aquarius (WP-660) holder

This is a custom-made Waterpik holder for the WP-660 model I made for my bathroom. It screws into the bottom of the Waterpik via 6-32, 1-¼ in machine screws. This model is imperfect, and I welcome anyone to come and make additions to this…

Downloads
78
Likes
7
Rating
5
P
PrintablesM.O.U.E.

Collet Wrenches for DWP611, DW660 and PR20EVS

Simple hand wrenches for the Dewalt 660, 611 and Bosch PR20EVS routers works well with 2.5 inch endmills and v bits. The tip of the tool needs to be smaller than the nut. **Dec 2, 2020 updated fit and added .25 inch bit shank holder.…

Downloads
75
Likes
14
Rating
0
P
Printablesdavidkupka2

Custom DNA Stage 2 Filter Cover Yamaha XT 660Z Tenere

Used with OffTheRoad high flow foam filter. Printed with PLA.

Downloads
75
Likes
3
Rating
0
P
PrintablesAaronLK

Vertical Notebook Stand HP Elitebook 660 G11 16 inch

The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.

Downloads
72
Likes
5
Rating
0
P
PrintablesJSchell1309

Acer XC-1660 Noctua NF-A9 PWM CPU Fan Adapter

This is a fan adapter to replace the stock CoolerMaster CPU fan with a Noctua NF-A9 PWM in an Acer XC-1660 PC motherboard. This fan adapter converts the 71.5mm stock fan bolt spacing to the larger square shroud on the Noctua NF-A9 PWM at…

Downloads
72
Likes
3
Rating
0
P
PrintablesGuvner76

4660 Roku Ultra TV VESA Mount

Decided I didn't want to mount the Roku directly to the TV. At work I normally I just velcro devices directly to the TV. Since I am using a mount for my TV, found David's excellent Roku Ultra TV VESA Mount removed the extra plastic and…

Downloads
71
Likes
6
Rating
5
P
Printablesshoyler

Sony a6000 Series Thumb Grip with Support Handle EXTENDED | a6000 a6100 a6300 a6400 a6500 a6600 a6700

Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.

Downloads
69
Likes
6
Rating
0
P
Printablesjerrydi

Crutch pad for Aprilia Tuareg 660

It's a Crutch pad for Aprilia Tuareg 660. It prevents leaving traces of aluminum on the ground and protects the aluminum stand. Fixing by adjustment. Print at a pitch of 0.4 in PETG or ASA. C'est un patin de béquille pour aprilia Tuareg…

Downloads
68
Likes
6
Rating
5

Kawasaki ZX-4R Rear Tail Light and Side Fairing (Right) COVER-TAIL,RH,M .S.BLACK 36041-0055-660

Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use…

Downloads
67
Likes
13
Rating
0
P
Printablesr15ch13

10" Rack mount for FRITZ!Box 6660 Cable

This is a mounting bracket for 10" racks that holds the bare PCB of a FRITZ!Box 6660 Cable. It's recommended to have one 1U slot free before installing this. The FON1 and USB ports are sticking out of the PCB, so it has to be inserted in…

Downloads
66
Likes
15
Rating
5
P
Printablesn.leinad

USB charger mount - Yamaha XT660

This USB charger mount is made for those Yamaha XT660X/R drivers that wants to charge there USB device while having it in the storage compartment under the seat. It is made to be used with a USB charger from "Pro-Car", but will probably…

Downloads
65
Likes
14
Rating
0

StreamLight Flashlight Holder (GoPro Mount, 66608)

Small flashlight adapter that fits a standard GoPro mount, the flashlight snaps into place with some force applied. I created this to use on my PAPR for cleaning inside metal printers at work, but there are GoPro mounts for just about…

Downloads
64
Likes
20
Rating
0
P
Printablesadmin

Cardboard FC660-style Mechanical Keyboard

Ingredients and build instructions are the same as the original keyboard except you must use M3 8 mm bolts for the case – any longer and they can puncture through the top. Pay attention to part orientation. The case needs to be laid flat.…

Downloads
61
Likes
45
Rating
0
P
Printablesdmadison

Neewer 660 Light Stand PSU Mount

Light stand power supply mount for the Neewer 660 video light and similar power supplies. Requires a 3/4" Velcro "One Wrap" tie to mount. More info: https://www.partsnotincluded.com/3d-printed-light-stand-psu-mount/ Category: Camera

Downloads
60
Likes
17
Rating
5
P
PrintablesAschdonin

3:1 1980er Lego Gokart 6609 / 3:1 1980s Lego Gokart 6609

English description below Maßstab des Modells ist 3:1, das Gesamtgewicht inklusive Stahlwellen 240g. Verwendete Materialien: Prusament PLA Jet Black OWL PLA Weiß (RAL 9016 Verkehrsweiß) OWL PLA Rot (RAL 3001 Signalrot) Fiberlogy FiberFlex…

Downloads
57
Likes
13
Rating
0
P
PrintablesLynxStar

Filament Swatches - Avery No 15660

Uses the same labels the remix source: https://www.amazon.com/Avery-Frosted-Address-Printers-15660/dp/B000GOY6F0?th=1 Will get around to uploading the case model for this in bit.

Downloads
56
Likes
9
Rating
4
P
Printablesjohn doe

Toyota Harrier 2006 Air Conditioning vent connector (55660-48)

Car air cond vent broke, need connector, designed it, printed it with PETG, you're good to go. STEP files included if you want to mod it. No commercial selling of this pls. only for personal use.

Downloads
53
Likes
2
Rating
0
P
PrintablesAdel

Asus GTX 1660 Phoenix 120mm Fan (Deshroud Mod)

Please refer to the original model's page for more comprehensive details, as the original creator has written an extensive guide about it.

Downloads
53
Likes
6
Rating
0
P
Printableshawlik

Aprilia Tuareg 660 – Cruise Control Switch

Replacement cruise control switch for the Aprilia Tuareg 660 (Tested on 2025 Rally pn: 2D000549). The OEM plastic switch breaks easily and is not available as a separate spare part requiring replacement of the entire control assembly.…

Downloads
51
Likes
1
Rating
0
P
Printableshawlik

Aprilia Tuareg 660 – Tower Reinforcement

Compatible with: GiamaicaWorx Front Rack System (Front Rack + Device Holder) 🔗 https://www.giamaicaworx.com/front-rack-system/ If you're mounting a DMD T865, T880 using the road/adventure holder, there's also a adapter model for that: 🔗…

Downloads
50
Likes
1
Rating
0
P
PrintablesTadTadd

Power Supply Bracket for Neewer NL 660 Video Light

These light stands are excellent for video work, but when I raised them up higher than 4 feet the power brick was left dangling by the short power cord. As an easy fix I created these two brackets: one goes on top and the other on the…

Downloads
50
Likes
11
Rating
0
P
PrintablesRichard A.

Motorcycle fairing mounting grommet Aprilia Tuareg 660

These are pretty standard in motorcycles to mount plastic fairings. 8.5mm inner diameter makes it just a touch tighter than original providing a snug but not too tight fit. Printed in Bamboo TPU HF on P1S printer 50% gyro infill but I…

Downloads
48
Likes
5
Rating
0
P
PrintablesJamie

LR3 Mount for DW660

Adapted (re-created) DW660 mount based on DW660 Primo mount , and then modified to fit Lowrider 3 carriage. Licensed CC-BY-NC-SA because it is derived from models with that license.

Downloads
48
Likes
6
Rating
0
P
PrintablesP V

OV3660 camera mount for voron 0 tophat

There are already two available camera mounts on printables that fit OV3660, but I was not able to user either one of them https://www.printables.com/model/703993-voron-0-usb-camera-mount Great mount, but unfortnutely I bought a 110 fov…

Downloads
47
Likes
6
Rating
5
P
Printablesshoyler

Sony a6600 Cage with hidden AirTag Storage

This is a very quick-and-dirty remix of a Sony a6600 cage made in Tinker CAD. It hides an AirTag in the hand grip. There is nothing holding/clipping the AirTag in place, other than the body of the camera. The printed example was made with…

Downloads
47
Likes
6
Rating
0
P
PrintablesJam

Simple NexiGo N660P Webcam Mount

A simple webcam mount. Made with some degree of height adjustment. IF your webcam has a ¼ tapped hole id recommend Lufas Bolts, they work great and come print ready in a few lengths no washer required.…

Downloads
46
Likes
2
Rating
0
P
Printablessonny L.

paint holder rad. side cover triumph 660

i use this holder to carbon fiber the side's, but you could also use them for painting. you can screw it down with M8. this is not necessarily necessary as the fit is tight enough.

Downloads
46
Likes
3
Rating
0
P
PrintablesGabriel Cabello

itx RX 6600 shroud

I designed this mod for converting a rx 6600 sapphire pulse to itx and suit my case, the gpu has a total of 172mm length and uses two 80x10mm fans, I had to cut and crimp the fans cables to the original PH2 4 pin connector, the gpu…

Downloads
45
Likes
2
Rating
0
P
PrintablesAustin Triggs

Egg Crate Attachment for Neewer NL-660

This custom-designed egg crate attachment is made for the Neewer NL-660 video light panel, providing precise light control for video production. The attachment clips easily onto the front of the light panel, offering a directional guide…

Downloads
45
Likes
7
Rating
0
P
PrintablesLeichtprotos

19" Rackmount Fritzbox 6660 Cable

2 Höheneinheiten Modell muss wahrscheinlich im Slicer geschnitten werden. Gedruckt ohne Stützen

Downloads
44
Likes
3
Rating
0
P
PrintablesAaronLK

Vertical Notebook Stand HP Elitebook 660 G11 16 inch Version 2

I modified the original version so it doesnt block as much of the notebooks air outlet

Downloads
44
Likes
1
Rating
0
P
PrintablesKriFPV

OV3660 camera case

Put together with m3 plastic nuts and 8mm m3 screws. Supports needed.

Downloads
44
Likes
3
Rating
0
P
Printablesjuan muñoz

PARRILLA XT660 XT 660

:) :) Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No Infill: 20 Filament: NOLOSEEEEEE PLA Notes: EN FIN POCO QUE COMENTAR Category: Vehicles

Downloads
44
Likes
2
Rating
0
P
Printablesjerrydi

Phone holder (Samsung A52) for Aprilia Tuareg 660

Samsung A52 phone holder for mounting on an Aprilia Tuareg 660 2023 motorcycle. V2: Adding Cameras windows, buttons accès and wire accès.

Downloads
44
Likes
7
Rating
0
P
PrintablesZdrapek

OV3660 camera mount

OV3660 camera mount for ikea lack enclosure

Downloads
43
Likes
1
Rating
0
P
PrintablesPyro_Industries

TB6600 Driver Holder

A model that holds 6 TB6600 stepper motor drivers. Use as a general storage holder or during actual use of the drivers. Print out of ABS, ASA, and PETG for use as the heat generated will warp PLA. Fan Mount and other accessories to come…

Downloads
43
Likes
1
Rating
0