Enclosure spool holder - complete - short version arm - 72mm + Bonus M3 screw ghost version
Reduction of the support arm from 115mm to 72mm for those like me who want a short Bonus M3 screw ghost version ;-)
- Downloads
- 35
- Likes
- 7
- Rating
- 0
Counting matching models…
Reduction of the support arm from 115mm to 72mm for those like me who want a short Bonus M3 screw ghost version ;-)
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports are required.
I printed mine in PETG, with 0,7mm extrusion width (0.4mm nozzle), 0,25mm layer heighth and 3 BOT layers using vase mode. The result needs only a bit filament, is light but sturdy enough and has an opening which fits common coffe spoons.
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
Collection of Gridfinity basic cups height 24 (172mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per…
Fake cigarette props for costumes and cosplays. Based on the original dimension of a regular (74mm) and a long (84mm) cigarette. AMS needed but your can cut my model and glue it if you want.
I present you a new top cover for the Centauri Carbon 2 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
Spool Adapter 72mm for Anycubic Kobra, replace original adapter spool! I'ts designed for Filament Spool SUNLU and similar with hole 72mm. Printable without support*. Printing at 0.2mm with 20 or more fill for better strength. I used…
Voici un lens cap holder, qui permet d'y clipser ces bouchons d'objectifs d'appareil photo. Très pratique car il s'adapte à la sangle canon par exemple. Les diamètres de bouchons acceptés sont 49mm pour le plus petit, 58mm pour le second…
The threads are reversed to prevent unscrewing while the filament is being pulled off the spool. Printed in PETG, PLA is not heat resistant enough and will sag if the heater is running.
Lense filter adapter 72mm to 82mm.
This is a parameterized/configurable case for camera lens filters. The design goals were the following: sturdy and robust, so that the potentially expensive filter is properly protected ergonomic, easy to grab, hold and handle secure…
People said the .3MF file was not working, so I have uploaded an .STL now. Print like this: non brim 15% infill gyroid 3 wall loops
This remix addresses the base to fit the AMS with spacing of 72mm/73mm/72mm
Liked the design of https://www.printables.com/model/211329-multi-size-lens-cap-holder and thought it would work nicely on my Lowepro ProTactic BP 450 AW II. The lenses I always have in my bag are 49, 52 and 72mm - so made adjustments to…
Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…
Used for https://www.printables.com/de/model/407688-bambu-lab-p1-x1-x1c-x1cc-filament-spool-switcher-w to use sunlu spools.
Thread with a layer height of 0.1 mm
72mm filament spool Adapter for Snapmaker U1
Need: m65 17-31 focusing ring update250902 small changes for shutter release cable
I had some old spools of filament and they had much larger diameter holes which don't work well on the U1 spool holders. So I made this. I added the Fusion file if someone wants to mess with the sizes. Sorry if it's quick and crude, but…
schöne Aufbewahrungsdose, hier speziell für ein Klangspiel, damit dieses beim Transport zum Yoga nicht leidet. Einfach zu drucken, keine Nacharbeit nötig. Viel Spass damit
Longer 72mm version of a Dyson Accessory Holder for IKEA Skådis by @URSPB . Now it can hold thicker accessories! Uses Skadis T-Nut Mounting System for Ikea Skadis Pegboards by @6d6178 . As original author @URSPB mentioned: Unfortunately…
Centering disc for Sunlu 72mm diameter for use with Bambu Lab Spool Winder You can download .3MF and .STL This model is for: Bambu Lab Spool Winder by Miklos Kiszely
Needed a new nozzle for my un-fantastic leaf blower so I whipped this one together. Works well. Constricts a bit and changes the outflow angle a bit to allow scoot the leaves away with a little more force. Works well. Resize it at…
This replaces the orginal fan/pipe connector on xTool F1 to connect to 80mm pipes (72mm inner diameter). This is the diameter ikier uses on Air Purifier and the laser housing. The original screws are still used. Im using this pipe:…
Print with TPU 95A.
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
The problem What common problem is shared by extractor hoods and printers? A lack of standardization and interoperability of the disposables! Parts fitting your specific machine are expensive or hard to find! This is a custom extractor…
This is a simple adapter to fill in the larger spools to the Prusa spool size.
Skadis beer holder using two of the “universal hook” by CSD_Salzburg Remixed from “IKEA Skadis Beer Holder” by Chillkroetchen . Used my primitive Blender skills to reduce the inner diameter from 80mm to 72mm while leaving the mounting…
A simple drywall box cutter template for two box with 72 mm distance. You need a 15x40 leveller bubble. like this → Have anice day :)
Shortened the smaller case to fit 72mm cigarettes. I was so happy with my original print of this that I altered it so my brother could have one for his smokes. Fits the pack without loose cigarettes. Kobra3 Printer .4 nozzle .2 height…
This highly adaptable modular drill tool holder, featuring an 8-grip system with substantial 140mm x 35mm grip dimensions, now includes a crucial enhancement: side-bar mounting capability. This addition expands its versatility, allowing…
I found a bit annoying that on the the Flashforge Creator Pro you can have the problem of filament spools falling from the shallow holders of the printer. This happens with most brands of filament. I have some GeeeTech, 3D Kaige and other…
I just printed in PLA, hole side down, with support and it printed fine.
I printed out the original files when I first started 3D printing a year ago. Was bummed to find out my ring did not fit. The ring didn't fit because I didn't measure before printing. Entirely my fault. Made an attempt at resizing this,…
This is a modified filament spool bearing adapter to fit spools that have bigger holes, like Sunlu and other brands. This woks on plastic and cardboard spools. Fits ZZ608 bearings. I have even been able to use it scaling it down on the Z…
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Modular lens cap Intro This project was primarily created for me to practice and learn more about designing in FreeCAD. While you'll find many other lens cap designs on Printables that may offer stronger springs or better functionality,…
Adapter für SUNLU Filamentpulen für das Python AMS Vieleicht past es auch bei anderen Herstellern; Durchmesser des Adapters ist 72mm. Keine Stützen oder besonderes Material nötig… :-)
An improved version of the original Parametric Bottle Holders - IKEA SKADIS with Hook width = 4mm Dual hook Improved hook design
A simple and easy to use filter box for one filter up to 72mm. The top and bottom half will snap into each other. Aswell the top half can be used as a Coaster for some cold drinks. 😀 I've used two different colors for bottom and top half.…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
This helps you to handle 62mm and 72mm lenses cap for DSLR camera Best print in ABS You have to remove the included brim with a knife pen after printing
I’ve tried existing models - they‘re simply not tight enough to reliably fit on the spool and/or the AMS without slipping off, so I decided to make my own which holds better. This model features slots on the adapter to allow for using…
AstroSolar filter & mask holder for camera thread 72mm
AOS 5 TrueRC Singularity 72mm antenna mount. Made specifically for HDzero Freestyle VTX. The addition of this extra length to the original mount allows to place the extra slack of the antenna inside of the tube instead of having it all…
Hinges and latch can be fitted with a piece of filament or metal wire. Version four has deeper grooves.
Quick model designed for this guide: https://handsonkatie.com/breathing-life-into-ornaments-the-smart-led-dragon/
This is a quick and easy wrench I made for the 72mm Nut on the back of a 2.5" Perko hatch latch commonly used on boats.
I wanted to do timlapses from my window early in the morning. Due to light from the room (and the outside through mirroring) this does not work as reflections and sunglare, etc. ruin the shots. The adapter ring for this 72mm sony lens…
Just add a tiny zip tie at the top of the print to create pressure on the antenna so that it doesn't move.
Filament spools with 72mm openings (used by Anycubic and others) end up resting on their edges in the Lack2 spool holders, creating more drag as they unreel. This sleeve slides over the spindles to fill the gap.
www.patreon.com/bkprint3d
This is bumper u made for a fimonda carbon frame (it can be used on other brands). It is 72mm wide. I would recommend printing it in PETG or something stronger then PLA. Category: Vehicles
As explained in the originate Model at https://www.printables.com/model/333828-spincycle-keep-every-spool-dry-for-bambu-x1-p1p-am This model is designed to make storing and using your filament rolls easier if you print from the Bambu Labs…
Remix en 72mm pour les drybox dans des boites de céréales
A 72mm adaptor for Cokin P-Series Filter Holder. Thread is from https://www.thingiverse.com/thing:565144/files Make sure to use 0.04 Layer heights so the threads work.
72mm spool adapter with 8mm hole for Polish Gumaplast PET spool. Category: 3D Printer Accessories
Only the spool holder adapted for a 72mm bore hole. All credits and gratefulness go to the OP.
Complete version of HP wand 272mm Organic paint on supports. 0,16mm layer height. 3 Perimeters. Aligned seam 10% Gyroid infill
Godox MF12 to 72mm magnetic round-adaptor (i.E. Godox AD100pro , Godox V1 , Godox V100 [not tested]) The image shows the adaptor together with a magnetic diffusor (other project) As i own quite a couple of lightformers and diffusors for…
Jar lid organizer for 70mm lids. Requires around 70g of PLA. Print settings: 2 walls 20% gyroid infill no supports!
72mm screw-on lens cap for Canon FD 35-105mm f3.5. It might also fit other lenses with 72mm filter thread but I don't have any to test on. Print at 0.1mm layer height for detail.
Remix of the original one cup holder, removed the logo, improved the rail for printing and enlarged the cup holder. Dacia YouClip compatible
spool adapter for winding filament onto Jayo Plastic spools with ~72mm ID. It's slightly undersized with the intention add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printing
This is a miniature sanding block that's designed to hold sandpaper (or sanding sponges) that are 72x20mm. It is a simple design, basically two rectangles fused together. It has a handle for your fingers to hold onto when sanding. You can…
This is my replacement part for cat scratching post. There is space to insert a nut.
Print settings: infill: 40% Walls: 4 No supports Material: ABS and PETG seems like a durable choice, PLA would work but wont last in a hot car for example PS. If someone needs different sizes just send me a message!
Adapter for plastering in wall junction boxes 72mm
Polar filter adapter for RF lens
This is made for Spools with a inner Diameter of 72mm. Near empty Spools in the Bambulab AMS often get stuck because they are very light weight. I have seen on AMZ a 500gr Weight to calibrate Gauges. This is a quick Holder vor this…
držák filtru pro mikroskop Carl Zeiss OPMI Pico
Customized version of http://www.thingiverse.com/thing:1175301 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1175301 Instructions Using the following options: retain_dia = 3.5 cube_z = 72.2 cube_y = 33…
Some spools have o bigger hole than Gravity spoolholder for MMU2S default nuts. This is ⌀ 72 mm inner nut that can be placed in the middle of the pin. It usefull also for NoClunk Gravity spoolholder for MMU2S .
This is a model of cover for Cirtoen C4 B7 2010-2014 headlight with 72mm hole (smaller one)
easily printable flowerpot for seedlings, I recommend printing with a height difference to implement the possibility of water absorption into the clay. Print without the bottom and top layers so that a honeycomb filling is created there…
A simple thrashbag holder for max. 72mm diameter rolls. Print in PETG, 2 layer walls with some infill is enough.
Parametric Lathe Faceplate Adapter 72mm-125mm. This adapter is meant to mount a Faceplate of size 72mm to a lathe with size 125 mm. As very temporary solution the PETG version can be used (95% infill recommended):…
print in .12mm height layer for the threading to work best use support
This is an adapter for a beverage bottle. It is designed to sit on top of the vacuum flask with an outer diameter, measured at the thread, of a) 72 mm or b) 80mm → ikea vacuum flask. Therefore, this diameter is the inner diameter of this…
Waterfilter wrench for Grünbeck FS-B with diameter 68 mm / 72 mm nose to nose. I haven't tested it in action yet, since I changed my filter last week (and had a hard time without a wrench). Therefore I'm not 100% sure on the marked open /…
For tank with 72mm inlet and 70mm retention ring. Printed with TPU 95A.
I printed mine with Creality Black Hyper-PLA with a Creality K1 Max using a 0.4 nozzle and Smooth PEI plate at 15% infill using the default settings without a brim. I dicovered just after starting the print knowing that I would run out of…
This is a Gridfinity tapeholder I made, specifically for my Ikea Alex drawers. It takes up 3x3 grid space. Theres an optional insert you can print to hold 25.5mm glue sticks. Otherwise the inner area can be used for other storage. Tape…
print in .12mm height layer for the threading to work best use supports
I simply changed the hole to fit my 72mm adapter. The hole is 72.4mm, which fits quite nicely the adapter I have.
Makes can holder 72mm to 60mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10% Notes: I made it with PRIMA CREATOR SELECT PLA Pro, CURA 230°g 60°g bed ,…
Screw-on lens caps lettered for various Canon FD lenses with a 72mm filter thread. These are additional versions of my previous model: https://www.printables.com/model/1799762-72mm-screw-on-lens-cap-for-canon-fd-35-105mm-f35 Thanks to…
Have a kerosene tank with a 72mm opening at the top. Lost the original cap, designed a new one in FreeCAD.
Flexible Hose Clamp 72mm with holder for secound funnel.
Customized version of http://www.thingiverse.com/thing:990972 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=990972 Instructions Using the following options: flangeWidth = 5 reelOuter = 200 boxThickness =…