Search results: 730

Sort order

Counting matching models…

P
PrintablesBlueThunder05

Nova Kool Fridge Shelf Riser (RFU7300D DC)

Created a parametric model that automatically adjusts the necessary features for a custom height riser that snaps onto the wire shelves in the Nova Kool RFU7300D fridge. The provided files raise the shelf by 1 inch. Change the “height” in…

Downloads
31
Likes
8
Rating
0
P
PrintablesJan January

Scania R730 RC

Scania R730 model RC wymaga klejenia i zaopatrzenia się w śruby m3 różnych długości. W razie problemów z włożeniem tapicerki do kabiny można z niej zrezygnować. Łożyska 6700 ZZ

Downloads
2,099
Likes
210
Rating
0
P
PrintablesKalleKnall

OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…

Downloads
1,623
Likes
145
Rating
4.88
P
PrintablesPaolo

SCANIA R730 HEAVY-TRACTOR

The 285mm long Scania tractor model features steering and freely rotating front wheels. The model was printed entirely in PLA, with a quality of 0.10 and 0.15, depending on the size of the part. To add a touch of realism, we printed the…

Downloads
1,600
Likes
363
Rating
4.9
P
PrintablesYO3GND

Icom 7300 rails

Reupload of the 7300 side rails designed by IU1OPK . No changes made as per original license. Print them standing - if you print them horizontally, the side forces you are protecting your rig against can easily cause layer delamination.…

Downloads
402
Likes
39
Rating
5
P
PrintablesShams747

MJX 7303 1/7 Citreon C3 Rally Car Inner Guard Liners

Inner guard liners for the MJX 1/7 Citreon C3 Rally Car. UPDATES RE-TWEAKED FRONT GUARDS FOR NEW TYRE FROM ALIEXPRESS WHICH CAUSED RUBBING ON INNER WALLS ON FULL LOCK May look like an already available set on the market, but after seeing…

Downloads
339
Likes
16
Rating
5
P
PrintablesSaud (HZ1SF)

Icom IC-2730 Side Brackets

There are many similar brackets around for many different radios but none for the Icom IC-2730 , so I made one. I used cheap M4x8 socket head screw from a kit, they worked nicely but I feel that they are just a bit smaller than the holes…

Downloads
333
Likes
21
Rating
0
P
PrintablesPiney29887

Speaker Baffle - Icom 7300

Nothing special, almost any filament will do. 0.2 layer height, double-sided tape to attach.

Downloads
305
Likes
23
Rating
5
P
Printableskoen

OPEL Astra J washer fluid reservoir cap 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.

Downloads
304
Likes
24
Rating
5
P
PrintablesTom Scofield

Side Frame and Handle for Icom IC-7300 - 2 parts

The frame designed by AndrewBrierley for the ICOM IC-7300 looked great, but I couldn't fit it in my printer, the part is 280mm long. In order to print the item I needed to cut it in half. You will need to print two of each part, the A…

Downloads
261
Likes
28
Rating
0
P
Printablesthall72
Downloads
238
Likes
28
Rating
0
P
Printablesthall72
Downloads
220
Likes
37
Rating
0
P
Printablesadammelancon

Mic Hanger for my Icom 7300 for 16.2mm thick shelf

A simple mic hanger for my Icom-7300. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .20 Infill: 20% Filament: hatchbox PLA Notes: I used tree supports with overhang over bed only.…

Downloads
204
Likes
21
Rating
0
P
PrintablesJus

Divider for Craftsman 30 Small Drawer Organizer CMST40730

Designed for the Craftsman CMST40730 small parts organizer. It's slightly tapered – shorter side points downward.

Downloads
197
Likes
24
Rating
0
P
PrintablesPeter Farell

Maïdou Doublé Voodoo Mentor of New Orleans 1730

Maïdou Doublé Voodoo Mentor of New Orleans 1730* Born in the West African kingdom of Dahomey (present-day Benin) Some strange voodoo prevented me from attributing her as being the mentor to a specific person in history. every time I…

Downloads
196
Likes
52
Rating
5
P
PrintablesBleo3

Ham Radio IC-7300 3-Level stand w/ memory card holder

I was using a piece of a 2x4 for holding up my radio at the right height. I decided to make a 3D printed stand with different height's so others could adjust them to their view. I sometimes record the audio and the radio settings, so with…

Downloads
196
Likes
27
Rating
5
P
Printablesthall72

Lego Compatible (3730.dat) Plate 2 x 2 with Towball Socket

This model is compatible with the lego system.

Downloads
189
Likes
27
Rating
0
P
PrintablesPolymath

Icom IC9700 or IC7300 Front Cover

This is a protective cover for the front of an Icom IC9700 or an Icom IC7300 Amateur Radio Transceiver. The front face plates of both of these Icom radios are identical and so for those of us lucky enought to own both, two print runs will…

Downloads
168
Likes
7
Rating
0
P
Printablesthall72

Lego Compatible (7302.dat) Slope Brick Curved 3 x 1

This model is compatible with the lego system.

Downloads
164
Likes
13
Rating
0
P
Printablesthall72
Downloads
164
Likes
33
Rating
0
P
PrintablesSander Leenders

Lego Compatible (2730.dat) Technic Brick 1 x 10 [9 Pin Holes]

This model is compatible with the lego system.

Downloads
151
Likes
6
Rating
0
P
PrintablesMarcel Salvador

Icom 2730 Stand

Stand for Icom IC-2730

Downloads
149
Likes
10
Rating
0
P
PrintablesR.R.

SCANIA R730

HueForge

Downloads
144
Likes
14
Rating
0
P
Printablesthall72
Downloads
118
Likes
29
Rating
0
P
Printables3DPTR

Icom 7300 LED Light Bar

This is an LED light bar for an IC-7300 ham radio. I used 5V RGB LED's and a Wemos D1 Mini running WLED to control them. The screws are 4mm. Wemos D1 Mini WLED

Downloads
117
Likes
12
Rating
0

SEGA Dreamcast arcade stick HKT-7300 wall mount V2

EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…

Downloads
115
Likes
16
Rating
0
P
Printablestato_713

Samsung Galaxy A8+ a730 case

Originally published here: Samsung Galaxy A8+ a730 case by tato_713 - Thingiverse Thanks to Vince Korz for testing the test this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials…

Downloads
107
Likes
4
Rating
0
P
Printablesdereulenspiegel

Zyxel NR7302 Stand

This is a simple stand to use the Zyxel NR7302 indoors. It might also be compatible with the NR7301 and NR7303, but this is untested. To mount the Zyxel NR7302 to the stand you need 4 M4x15-20 screws.

Downloads
99
Likes
5
Rating
0
P
Printables_ucas

Shimano Shark Fin Bike Chainstay Deflector/Protector- Deore XT DF-M730

A semi-faithful reproduction of Shimano's iconic Shark Fin, which “keeps the chain from jamming between the tire and chainstay” according to the original packaging. Attach to your bike using zip ties and/or double-sided tape. Please note…

Downloads
97
Likes
19
Rating
5
P
Printables._.

IC-7300 Speaker Baffle with Magnets

Same model, just added holes for insertion of 6x2 magnets. Printed in PETG with tree supports. Added a bit of epoxy on the top of the magnet to hold it in place, but probably not needed.

Downloads
94
Likes
8
Rating
5

Vertical Gear for 1963 Bernina 730 Record

This gear was made to replace the original bakelite gear made by Bernina in the early 1960s. The new gear can be printed in PLA or other hard wearing plastic. Simply break the old gear off while the new gear is printing. When the new gear…

Downloads
85
Likes
8
Rating
0
P
PrintablesPayien

International windows clip 3546062C 4300, 4400, 7300, 7400, 7500, 8600

The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.

Downloads
79
Likes
4
Rating
0
P
PrintablesSQ9MDD

ICOM IC-730 AT Plug

It can also be used as a modification to connect the CG-3000

Downloads
77
Likes
7
Rating
0
P
PrintablesReelClones

Stand for Philips MG 5730 & accessories + BRUSH

I loved the original stand but noticed that there was no space to store the cleaning brush, so I thought I'd add one! I also added lips to the side compartments as I thought the attachments may fall out due to my clumsiness when being…

Downloads
77
Likes
6
Rating
0
P
PrintablesRedeye

Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850

Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold

Downloads
73
Likes
10
Rating
0
P
PrintablesSimon

Extra parts for Scania R730 RC

This is a small collection of parts for @JanJanuary_511120 's Scania R730 RC model. If you are missing a few parts in the original model, this might be for you. It currently includes: Functional rear shock absorbers The two pieces simply…

Downloads
73
Likes
6
Rating
0
P
PrintablesMallonbacka

Mounting Bracket for Philips Series 3000 MG3730 Beard Trimmer

Mount your Philips beard trimmer vertically, for example, in a bathroom cabinet. Remember to get it high enough to plug the charging cable in, and low enough to be able to drop it in easily. This prints as a single piece, with a little…

Downloads
72
Likes
11
Rating
0
P
PrintablesMLmodel

ScaniaR730 frame

Je to rám pro ScaniiR730 od MLmodel. Celý model ScaniaR730 je možné zakoupit na www.mlmodel.cz. Upozorňuji že rám nebyl testován na modelu. This frame is designed for the Scania R730 by MLmodel. The complete Scania R730 model can be…

Downloads
70
Likes
6
Rating
0
P
PrintablesFX82

ICOM IC7300 / IC9700 Headsetbox Hamradio

Connect your headset to your TRX. All connections fit into this small box. The box fits nicely on the side of the TRX. Holes are 6mm and 8mm offset. Holes for magnets are 10 to 1mm. If you have any questions you are welcome to write. Vy…

Downloads
68
Likes
11
Rating
0
P
PrintablesIonNight

Bionicle Disk Launcher #47304, Lego compatible

Imported from my designs on Thingiverse. Original upload was 27.03.2019 (dd.mm.yyyy) 3Dtommy requested this and helped me test all the iterations. Wait for the model to cool down or else you might screw up the tension. I tried mine when…

Downloads
66
Likes
9
Rating
0
P
PrintablesJoshua Owens

Subaru Overhead Ham Radio Mount (Icom 2730A)

Subaru Overhead Ham Radio Mount (Icom 2730A) Vehicles It Fits: Outback 2015-2017 Possibly 2018 and 2019 as well. Forester: 2014-2016 WARNING: I am not responsible for any damage to your vehicle. This project will permanently alter your…

Downloads
57
Likes
21
Rating
0
P
PrintablesRedeye

Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850

Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold.

Downloads
57
Likes
16
Rating
0
P
PrintablesMLmodel

Supports for ScaniaR730

They are supports for the ScaniaR730 model. It is good to avoid fatigue of the leaf pens. Fold according to the photo and screw through with an M3 screw. Jsou to podpory pro model ScaniaR730. Je to dobré aby se zabránilo unavě listových…

Downloads
55
Likes
28
Rating
0
P
PrintablesKYFriedHam

Icom IC-2730A to AMPS Adapter Plate

I purchased a new mount for the control head of my Icom IC-2730A amateur radio. The mount uses the standard AMPS profile mounting pattern, but the radio has a custom spaced mounting pattern. The adapter plate sold by Icom was 40 bucks so…

Downloads
55
Likes
5
Rating
5
P
PrintablesMLmodel

ScaniaR730 s LCD

Tato upravená palubní deska je pro model ScaniaR730 v měřítku 1/10 od MLmodel a nabízí možnost vložení LCD displeje.Díky tomu lze rozšířit Sound & Light System od MLmodel. Model ScaniaR730 1/10 a Sound & Light System lze zakoupit na…

Downloads
51
Likes
8
Rating
0
P
PrintablesEF

Bernina 730 nylon cam gear

Needed to replace a broken nylon cam gear on an old Bernina Record 730. The model provided on https://www.printables.com/model/298486-nockenstapelgetriebe-fur-bernina-nahmaschinen-730- did not fit well, It appears to be a straight gear…

Downloads
50
Likes
5
Rating
5
P
Printableslodemia

Beefy 2u Bracket for Dell 710/720/730

This is a quick and dirty remix that will work for a dell 710/720/730 server that mounts it horizontally to the wall

Downloads
50
Likes
3
Rating
0
P
Printablesderek mich

Stand for Philips MG 5730 Multigroom Trimmer

there are specific slots for both the nose/ear trimmer and precision shaver on the sides.

Downloads
49
Likes
17
Rating
0
P
Printableskormizz

Karcher Adapter 69974730 -> Hose

Karcher adapter similar to 69974730 connector for garden hose 19mm (ID). Printed using PETG 0.2mm. Good to apply teflon tape on the both sides (thread, hose) and elastic band in the empty space under the thread (like the original). I've…

Downloads
48
Likes
8
Rating
0
P
PrintablesAxMn

Craftsman (CMST40730) Mini Drawer Dividers

Purchased a couple craftsman (model CMST40730) mini drawers only to find they did not come with any dividers. I searched for other models, but they were too basic and lacked indents in the bottom for the little lines, so I made my own,…

Downloads
45
Likes
8
Rating
0
P
PrintablesTT99C5

Dell H730/H330 PERC RAID Controller 40mm Fan Bracket

I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round. There were heat sink variations…

Downloads
45
Likes
1
Rating
0
P
PrintablesControforme

Portable 17" laptop display enclosure (HP DV7 N17306 -L02)

This is an enclosure for a 17" HP Pavillion DV7 (2011) Display. Display part number: N17306 -L02 IMPORTANT NOTE: The display can be rotated max to 30 degrees, after that the cable disconnects. I'm planning to work on a rev2 that supports…

Downloads
43
Likes
19
Rating
0
P
PrintablesSander Steffann

Dell R730xd blank 2.5" caddy click-on labels

My Dell R730xd with 24 2.5" drives has no decent place to put a label with the server name. I made these little click-on labels so that I could put a label on one of the empty disk slots. Either just print the blank label and put a…

Downloads
39
Likes
4
Rating
0
P
PrintablesAlex Ward

PTK 7308 Servo Tray

standard version is for use with M1.4 or M1.6 screws Second version is designed for M1.6 brass threaded inserts.

Downloads
39
Likes
0
Rating
0
P
Printablescmh

Blade protector for Shun DM7300 shears

We picked up the Shun DM7300 kitchen shears as they were highly recommended by the folks of Cook's Illustrated/Americas' Test Kitchen. Since we are going to keep them in a drawer, it seemed like a good idea to have something to protect…

Downloads
38
Likes
4
Rating
0
P
PrintablesJuju

Rallonge clignotant (stay winker) 500cb ref. 33441MY5730

Bonjour, Nos 500cb ont bientôt 30ans pour les plus vieilles (comme la mienne l'année prochaine!). Et généralement si vous avez les clignotants d'origine, ils finissent pendus au bout de leurs fils! Rien y fait même en rachetant la…

Downloads
38
Likes
1
Rating
0

Icom IC-2730A Support

I designed a mount for the Icom iC-2730A because the manufacturer no longer supplies it with the radio, only as an accessory. I printed it on 3-wall PETG with 15% infill. I hope it's useful.

Downloads
35
Likes
6
Rating
0
P
PrintablesHaK-Butcher

ICOM 2730a Radio Mount (Jeep XJ)

Jeep XJ 96 and older, blocks off the existing center air vent on the dash.

Downloads
34
Likes
10
Rating
0
P
PrintablesKelu

Mac Mini M4 mount for BenQ PD2730S monitor

Got a Mac Mini M4 and a BenQ 27 inch 5k monitor (PD2730S)? Then this is the mount for you :) Attaches the Mac Mini M4 to the back of the monitor to hide the Mac and its cables away, for a clean desktop experience. Printing instructions:…

Downloads
34
Likes
2
Rating
0
P
PrintablesBrandon

HP T730 Fancy Legs (3.5" HDD Carrier)

I utilize an HP T730 in my network as the backup node for my pfSense firewall and my piHole ad blocker. I also wanted to utilize it as the backup point for my main server's virtual machines and data NAS. Due to the small form factor of…

Downloads
33
Likes
5
Rating
0
P
PrintablesJoFlash

Roller release lever for Brother P-Touch PT-2730

Because of the complexity of the part I have printed the lever on my resin printer.

Downloads
32
Likes
6
Rating
0
P
PrintablesRegis

Dishwasher handle - SMEG Essentiel B - Ref : 764730231

I picked up a dishwasher, but there were a few pieces that were broken.

Downloads
31
Likes
1
Rating
0
P
PrintablesPetr Bouda

Sencor SVC730 - Vacuum cleaner adapter on the hose

Jelikož se mi do ruky dostal vysavač Sencor SVC730GR jako funkční před vyhozením a neměl hadici, rozhodl jsem se vytisknout nástavec na hadici, kterou jsem měl z jiného vysavače. Průměr na hadici je veliký 42mm. Model následně potřebuje…

Downloads
30
Likes
2
Rating
0
P
Printablespolymatt

IBM ThinkPad 730T Tablet - Top Bezel

This is a reproduction of the top bezel of the IBM ThinkPad 730T Tablet computer. You can find more information in my restoration video below:

Downloads
28
Likes
4
Rating
0
P
PrintablesGXLForPTB

Simple Holder for mg3730/15 Philips trimmer

Some very simple holder for mg3730/15 Philips trimmer

Downloads
28
Likes
4
Rating
0
P
Printablesokrjcreations

Delonghi / Kenwood Radiator Room Heater Foot Castor Wheel Assembly 6708EK, EW7307K, EW0507K

Remove the lower sheet metal castor bar. there is one nut on the bracket. remove the pin from the castor part with a tool. print this part and put the old castor back into it. reassemble.

Downloads
26
Likes
3
Rating
5
P
PrintablesRESTLESS DESIGN

Dell NPS-730AB Mounting Bracket

These wall mounting brackets can be used to mount a Dell NPS730AB power supply to a wall or other vertical surface (I mounted it to the side of my IKEA Lack enclosure). The holes are dimensioned for M4 mounting hardware. Support If you'd…

Downloads
26
Likes
4
Rating
0
P
PrintablesHrvTagz

Rotary Station/Organizer (Dremel 7300)

Here's a remix of a Rotary Station/Organizer for the Dremel 7300 rotary tool from designer Jordouellet from Thingaverse. Wanted the rotary station and tool organizer merged and printed onto a single plate, the other plate is for the…

Downloads
26
Likes
9
Rating
0

ICOM IC-7300 KEYPAD

Here is my version of Icom IC-7300 Keypad. 4 memo. Knobs used from aliexpress shop: https://a.aliexpress.com/_EHrIWoA Projet can be copy in thinkercad:…

Downloads
22
Likes
3
Rating
0
P
Printablespolymatt

IBM ThinkPad 730T Tablet - Battery Enclosure

This is a reproduction model of a battery enclosure for the IBM ThinkPad 730T tablet computer. The inside is designed to accommodate 6 AAA-size NiMH cells and 3 terminals. If you'd like to see how I made the terminals, please watch the…

Downloads
21
Likes
2
Rating
0

XikeStor SKS7300-4X4T Rack Mount Ears for Mini Rack 10 inch

This is a rack mount ear for 10 inch mini racks like the DeskPi RackMate.

Downloads
21
Likes
3
Rating
0
P
Printableslogan_13

Philips Multigroom MG5730 trimmer stand

I have a Philips MG5730 and I couldn't find a stand that could hold the trimmer and all its accessories, so I designed my own! The stand has slots for all the attachments, power cable (AU/NZ) and brush. My print settings Material: PLA…

Downloads
21
Likes
3
Rating
4.5
P
Printablespolymatt

IBM ThinkPad 730T Tablet - PCMDIA Door

This is a reproduction of the PCMCIA door cover for the IBM ThinkPad 730T tablet computer. For video of the full restoration, please see below:

Downloads
20
Likes
1
Rating
0

Kverneland Accord CX Discs Coulters Closing Plug/Cap (ref. AC495730)

Closing Cap for Kverneland Accord CX Discs Coulters (ref. AC495730) There are two different versions. The outside diameter is equal, but the inner diameter ist different (22 mm or 29 mm). Print instructions Supports: No Resolution: 0.2mm…

Downloads
19
Likes
0
Rating
0
P
Printablespolymatt

IBM ThinkPad 730T Tablet - Pen Holder / Cover

This is a reproduction of the original pen holder for the IBM ThinkPad 730T Tablet computer as well as a custom version. 730T_door_pen - this is the original model that has a lever to help eject the pen. This can be difficult to print so…

Downloads
18
Likes
1
Rating
0
P
PrintablesMikyner

Shelf for spices (Cooker hood BEKO CWB6730X)

Shelf for spices (Cooker hood BEKO CWB6730X)

Downloads
18
Likes
4
Rating
0
P
Printablesrafajluque

SMD 5730

Rail para smd 730

Downloads
18
Likes
1
Rating
0

Skystars g730l 7in fpv drone antenna mount for DJI & Caddx antennas

This model is made for the specifically for the DJI air unit antennas but should fit any other similar antennas. Let me know if you want any changes to the design send me a messag or comment and ill do my best to help you out otherwise…

Downloads
18
Likes
4
Rating
0
P
PrintablesSnoogle

Ersatzbefestigung Aschenbecher BMW E32 (730i-750iL)

Der Aschenbecher in der Mittelkonsole des BMW E32 (und vermutlich auch viele weitere) ist mit Hilfe von zwei sog. Klemmmutteren, die innen in der Konsole auf zwei Kunststofflaschen stecken, verschraubt. Wenn der Aschenbecher allzu beherzt…

Downloads
17
Likes
3
Rating
0
P
PrintablesSam_Fisher

Adapter MaxXT R7303 Sander to Bosch Click & Clean

You can use this adapter to connect the MaxXT Electric Orbital Sander to the Bosch Click & Clean System. Printed in PETG with five perimeters. The adapter is slightly eccentric. Make sure you put it in the correct orientation.

Downloads
16
Likes
2
Rating
0
P
PrintablesC_J

Icom 2730 lido backplate

I needed a back plate to mount my Icom IC-2730a to a Lido AMPs mount. The stock brackets seem exorbitantly high priced for what they are, so I decided to make my own. Just pay attention that the Lido mount is asymmetric, note the way the…

Downloads
15
Likes
5
Rating
0
P
PrintablesDave King

Headset Wire Clips for LG HBS-700 and HBS-730

Best grippy/slidey compromise I could find for these two headsets. This is my first design. I'd print four clips for each headset, two for each side. The two old LG headset models are slightly different sizes, and came with worthless…

Downloads
15
Likes
4
Rating
0
P
PrintablesDL1OLI

Renault Zoe Phase 2 (from 2019 on) holder for ICOM IC-2730 Control Unit

Zoe Phase 2 (from 2019 on) holder for ICOM IC-2730 print in PETG.

Downloads
14
Likes
1
Rating
0

Arm guards for Skystars g730l

made for motors with 19mm hole spacing (see pic) print with TPU

Downloads
14
Likes
1
Rating
0
P
PrintablesBitWizrd

Startech ST7300U3M USB 70mm 100mm VESA Mount

Just a very basic sturdy VESA mount for the Startech ST7300U3M USB hub in 70mm and 100mm sizes. I recommend at least 5% infill and print with the countersinks for the screws facing upward. Uses standard M3 pan head screws for the hub…

Downloads
12
Likes
1
Rating
0
P
PrintablesSnoogle

Beleuchtungseinlagen Aschenbecher BMW E32 (BMW 730 -750)

Bei diesem Model handelt es sich transparente Einlagen für den Aschenbecher eines BMW E32. Im Orginal sind diese Einlagen aus transparentem, roten Kunststoff und auf der Oberseite des Aschenbecher-Gehäuses eingebracht. Durch die…

Downloads
11
Likes
5
Rating
0
P
PrintablesMixedMedia

Icom IC-7300 body

Icom IC-7300, with decals. This model is not intended for printing, but rather to design accessories for the radio. I tried to upload the Fusion .f3d file, but received an error, despite it being an approved format.

Downloads
11
Likes
0
Rating
0
P
PrintablesJohnyRi

TV Center Speaker Holder Philips 58PUS7304

Model designed to hold a Logitech Z906 center speaker under a wall-mounted Philips TV, where the original stand would be, if the TV would be standing. Printed with standard settings. Used a PLA filament. For fixing the speaker, use any…

Downloads
10
Likes
2
Rating
0
P
PrintablesJarda K 66

Genius Keyboard Twin Touch 730e Legs

Nohy ke klávesnici Genius Twin Touch 730e Legs

Downloads
10
Likes
1
Rating
0
P
PrintablesLibor P

Canon Powershot SX730 HS replacement battery cover

I bought a second-hand Canon SX730 with good discount because the battery lid had been broken off and missing. I fixed it with my Prusa and I'm sharing the model in case anyone has the same issue.

Downloads
10
Likes
1
Rating
0
P
Printablesrrssll

Replacement switch to fit LG Tone HBS-700, HBS-730

The first time the switch broke on my LG Tone 730, I salvaged one from my LG Tone 700. The second time it broke was this week. So I designed this replacement today. I printed it in yellow PLA so it'd be visible against the black headset…

Downloads
10
Likes
1
Rating
0
P
PrintablesBryce

IC-2730 Chevy Truck Mount

This mount should fit 2002-2007 classic Chevy trucks in the center console between the two power outputs. You will need to drill a single hole in the back for the wire to pass through and I used VHB tape to stick it down to the bottom.

Downloads
6
Likes
3
Rating
0
P
Printablestomasf

1730 Hotend mount for RobotDigg effector

A mount for attaching a 1730 hotend (plus a dc42 IR sensor) to a RobotDigg delta effector . It's meant to be used together with my Nimble mount . Category: 3D Printer Parts

Downloads
6
Likes
1
Rating
0
P
PrintablesBrinohm

Geiger Counter Kit box - G24730ASB kit

I recently purchased a pre-assembled Geiger counter kit from Electronics Goldmine and noticed that they didn't have an option for a housing for it. So I thought it would be a fun Tinkercad project. This is a simple rectangular box with a…

Downloads
5
Likes
2
Rating
0
P
Printablesjacob mccoy

GM 13227300

WORK IN PROGRSS

Downloads
5
Likes
2
Rating
0
P
PrintablesBrianHanifin

Rand McNally GPS Mount Adaptor: RVND 7720 to 7730

This is an adapter to allow a Rand McNally RVND 7730 LM RV GPS to mount to a Rand McNally RVND 7720 LM RV GPS dash mounting plate in my 2015 Winnebago Brave 31C. Print Settings Printer Brand: Prusa Printer: i3 MK2S Filament: E3D…

Downloads
5
Likes
0
Rating
0
P
PrintablesLief91

Qotom Q730G5 for 10" rack

🧩 The model I made this model for my Qotom Q730G5 S08 that is hosting my opnsense. The dimensions are the following : 155*127*48mm There is only one model but I did upload the Fusion file with all the steps if you want to remove or add…

Downloads
4
Likes
1
Rating
0
P
PrintablesLukas M.

Porta filter holder for Hyundai EM 7301

Držák páky u pákového kávovaru Hyundai EM 7301. Velmi spolehlivý.

Downloads
4
Likes
0
Rating
0