Makita DVC750L vacuum adaptor for Makita DBO180
Makita DVC750L vacuum adaptor for Makita DBO180
- Downloads
- 1,257
- Likes
- 218
- Rating
- 4.8
543 models
Makita DVC750L vacuum adaptor for Makita DBO180
🇬🇧 The OST is the low-cost, open source version of the commercial Smallest. A great way to discover the concept, but the version available on my shop offers better durability and more features. 🇫🇷 Cette version open source OST est la…
German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…
This is suppresor for Artemis SPA PP750. It has the right thread to fit the barrel. I've also done barrel cap replacement and custom K baffles meant directly into PP750 barrel. I've added second type of K-baffle with 8 holes in bottom.…
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
Wall mount for the Bosch Professional GBL 18V-750 Leaf Blower
Spare parts for Playmobil pirate ship (3750) These are the mast clamps for the Playmobil pirate ship no. 3750 from 1989. https://www.playmobil.de/Piratenschiff/3750-A.html Wall thickness four perimeter, layer thickness 0.2 in PLA. Screwed…
Very simple picatinny for artemis / snowpeak PP750 & PP700 Only a friction fit sufficient for bipod, not for any kind of sighting attachment please.
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
This is meant as silencer/suppressor replacement for SPA PP750 cal. 5.5 mm internal suppressor. I accidentally lost the originals, so I did this one. I've also put cotton wool outside the K-baffles, works better than original imho. Each…
This design allows you to wall mount your Lego Star Wars UCS Slave 1 vertically. After printing I had to file all the corners as my printer doesn't quite make them square. I probably over-engineered this as I'm paranoid about it jumping…
Pokud se vám stalo, že se vám v průběhu hraní si se stavebnicí Boffin 100, 300, 500 nebo 750 poškodila vrtulka nebo „kříž“, na který se vrtulka nasazuje, tak si můžete stáhnout přiložený model vrtulky, „kříže“ a můžete si je vytisknout…
Printed with 10 walls. Supports required.
This bullet tray is for a Dillon XL750, it is similar to the original Dillon version
The blocks incorporate a 79.4mm Center line radius (3.126" CRL) Alignment notches are every 22.5deg as well. Basic parts included: 1" long straight 1" long straight with dead-end 10 deg - 79.4mm CRL 15 deg - 79.4mm CRL 22.5 deg - 79.4mm…
Stand/holder for Dillon 650/750 tool head and related accessories. If you have large die nuts or need to store primers slide assembly as well, check another model here:…
A few years ago I painted my own magazine for the PP750 cal .177. The assembly needs some more fine tuning, I'm using a small lathe, drill bits and also need to wind the spring. I printed from PLA with a 0.25mm nozzle.
The Snowpeak pp750 is excellent, but the default single shot tray is a bit fiddly. There are 3D models for single shot loaders that work with the sliding rails but I removed those so I created a single shot loader that works without the…
I couldn't find a Bombardier Global card kit, so i made one. I have a Gulfstream G650 one in the works as well. Coming soon. This STL can be scaled smaller, you just may loose some of the thin lines around the cockpit windows. try using a…
The is my version of an Bahtinov Mask (created with AstroJargon) for my Skywatcher Teleskop N 150/750 PDS Explorer BD OTA. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Using the same dimensions as the standard Skywatcher dustcap. The .stl is completely manifold and thus perfectly printable. tested settings with PETG: layer height: 0.3mm 2 perimeter shells infill: 20% no supports needed
A 1:7500 Scale map of ancient Rome. This model is intended to be printed with a 0.4mm nozzle divided into four equal size pieces, however it can also be printed in one color with a 0.2mm nozzle. I printed mine in black filament, spray…
Hi everyone. I share here my solution to provide some wind protection for the Kawasaki Z750S. As you may have already found out if you arrive here, getting handguards it's difficult, most of them don't fit properly. And if you are like me…
This is my first ever published model, and yes, it's literally a square with a hole in it. I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to…
This model is compatible with the lego system.
Completely reworked from the original, correcting the erroneously offcentred parts, and exporting with a much higher polygon resolution. Narrowed the base posts a little in order to ensure snug fit with OEM part this attaches to. Print…
If you have this style gas block on a .750 system it should work for you. The two pin holes was only for modeling purposes.
This model is compatible with the lego system.
The Lower shield was printed in red ABS with the added design support to prevent warpage. The Tag base was printed with red filament and the letters in silver. Shield was printed upside down as shown. Then it was heated with a Heat Gun…
For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…
This is an updated tool head stand, suitable for those having larger die nuts, or need to store primer slide assembly as well in the stand. No specific printing requirements.
Einlegeplatte für die beliebte Makita Oberfräse RT0700 und deren Nachbau Katsu 101750. Die Montage des Kantenfräsmoduls in die Einlegeplatte erfolgt komplett ohne Werkzeug von oben. Anschließend wird die Oberfräse von unten eingeschoben…
This model is compatible with the lego system.
A quick remix to fit the BTT PI V1.2 case to the VESA 750 pi mount backpack from Justin Vallely: https://www.printables.com/model/431027-sovol-sv06-backpack
This is single part single pellet loader for Artemis PP750, cal. 5.5 mm (.22"). Tested with PLA. principle of operation: https://youtu.be/85xVE5YJ6V0 Pellet loader for 4.5 mm (.177") caliber only tested by other thingiverse user. The…
The print needs to be cleaned and the holes to be drilled exactly to fit the rod, spring and other parts.
I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…
This is a round counter for Dillon 650/750 Reloading press, it could be used to count other metallic items I suppose. Remixed from a round counter for Dillon 1050 reloading press found on the internet a couple of years ago. The counter…
⚠ This is NOT the entire model! This is a demo/test version. 🚀 This file is designed for those who want to try Craycle airplane kits before purchasing. Note: Download the text file to reach all items! 📦 Contents of this package: ✅ Craycle…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
Ein Neuer Deckel für die True Fruit 750ml Flaschen mit Trinkhals. eine Handvoll vorteile bietet der neue Deckel. z.B er Rostet nicht, das Trinken ist einfacher und einfach zu drucken :) Das ist das Grundmodell. ein Stopfen und Neue…
This is case for server power supply modified for HAM use. Material used for print: GT-3 High Speed Matte PLA. Attention: please pay attention to the changed switch model.
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
Fork protection for NC750X. Should also fit NC750S and NC700X, NC700S
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
This is my first attemp for a sensor case, which reads temperature, humidity and lux. It uses a d1mini flashed with Tasmota and a DHT22 and BH1750 (GY-302) as sensors. The data is published via MQTT to my HomeAssistant instance. This is a…
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/64 Scale Assembly Manual: Google Docs Check out the Dragon Railway ecosystem! Join our comunity : Discord If you are happy, Buymeacoffee!! Print settings: Cura 3MF file
This fits Pyrex containers with the red rectangular lid. I used TPU. Might try Nylon
This is a replacement drive caddy for the Corsair750D case. Print in PETG if possible. Use either rubber mounts or the propper screws for mounting the hard drive
If you have this style gas block on a .750 system it should work for you. I printed in PLA with a 30% infill and have had success.
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
ENG: A simple bird bath that bolts to a railing. The span of the clamp is about 5 cm (~ 2 Inches). A support element is built into the clamp, which can be easily broken out. For the clamp, screw and connector I recommend 25% infill. Print…
Printed in Voxel PLA+ I used hot glue to help everything stay together
Corsair SF750 PSU holder, designed without fan grilles to reduce noise from turbulence. It features a 1cm lower offset to minimize AIO tubing bends.
Openings in the base are for easy cleaning and drying. For the other Philips trimmer stand, please check this link: https://www.printables.com/model/1314264-philips-qp2630-oneblade-stand-organizer
Summary This project provides printable negative holders for Epson range of flatbed scanners with transparency support, namely: v700, v750, v800 and v850. The main objectives of this project are: to allow for easy and precise negative…
Dillon XL650 and XL750 clamping toolhead. Requires M3 bolts, recommended at least 20mm long. Version 2: Added 5.2mm wide by 6.4mm deep hold on the underside of the locator to allow for the use of M3 heat-set inserts. McMaster Carr PN:…
This bracket was designed for mounting my GL.iNet X750V2 router in my electric cupboard in a camper van. Two versions exist currently: No mounting holes With mounting holes designed for No.2 (2.2mm) Self Tapping Countersunk Screws.…
No special print requirements, use any crystal clear PLA filament for the LED diffuser part. Designed for “long” LED types, for example OSW5DK6E61A. 3mf and gcode files are created in Ultimaker Cura.
Fasten with zip tie.
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread. You can copy and edit the original file here:…
My original TOASK bag (15g) looks little bit tired so I made this clip (6g) to hold lid. As side effect I reduce the weight of my cooking set. It should be OK also for 650ml version.
3 Part Dell Precision 7670 Laptop Stand. You will need 4mm rods cut down to 25cm length. Do not damage the laptop you should use Tape foam on the Touching areas.
This model is compatible with the lego system.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wallmount made in onshape that lets you display the Lego Tie Fighter UCS 75095 using the same method that the display stand uses. The wedge shape allows you to hide the screwholes for a clean mount. I included a recess on the front of the…
This model is compatible with the lego system.
This model is compatible with the lego system.
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/32 Scale Assembly Manual: Google docs Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!!
air intake flange for Yamaha xv750 Virago 81-83, should work for later models too afaik. Category: 3D Printing
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
I started working with 3D for a litle time, I did not find any Mikrotik rb750gr3 for 10 inch rack, so I made my own.
Dillon 750 and 650 toolhead holder for tool wall. The holder can also store all the parts from the dillon caliber conversion kit. The toolhead holder is made for a tool wall with square holes of 9 mm x 9 mm (0.354") and a pitch of 38 mm…
Can be printed with any material. Made to be attached onto a pole.
Mine was printed in ABS, 0.2 layer, 40% infill. Doesnt really matter. Should work with every Lens and / or without.
This is a plastic insert for a GE gas oven burner control knob. The GE model I have is JGS750SEF5SS and one of the knobs was spinning freely since the little plastic insert had worn out. This replaces that insert and allows the knob to…
Hello, this is my simple Rack Mount for Mikrotik RB750 Gr3 HEX. I designed this mount to use 1U space ( little bit less to allow some play) Mount is made very thick and sturdy to allow pluging and unpluging of cables without holding…
Print in PETG with line width of 0.3mm, make sure z-seam is not on the thin spring and the spring is actually 2 lines wide (I printed 0.3 mm out of 0.4mm nozzle just fine) Takes about 750g to fully compress (pretty much in between grey…
MOD. ALFA ROMEO 1750 Gran Sport del 1930 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
A standard bahtinov mask will help with focusing for astrophotography. A tri-bahtinov mask has the additional support for making sure the telescope is well collimated.
I struggled finding a simple adapter for the exact combo of Makita LXT tools I have. None of the ones I found are fitting. I recommend this as a simple CAD excercise, since it is simple and basic shapes. But in case you cant be bothered,…
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
Need to glue parts together. Print on Prusa Mk4s 0.15mm Speed profile without support
Very simple and basic design (lacking details) of wheel chocks for Bruder 2750 MAN Breakdown-Truck. They serve to stop the car from falling down from the breakdown truck.
Flachdüse mit Verlängerung, für Bosch Professional GBL 18V-750 Mit Verlängerung für erweiterten, breiten Luftstrom zum Reinigen großer, ebener Flächen Zum Entfernen von Laub, Schmutz und Pulverschnee in aufrechter Körperhaltung Geeignet…
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Surprisingly, I couldn't find a case that would work for me so I had to design one. My board is AZ Delivery but it probably should fit others if not you can play with parameters in Fusion 360. The sensor can be screwed with m3 bolt.
This tool holder was designed to be simple and compact. It holds all the required allen wrenches for servicing a Dillon XL650 More free AzJake projects: https://azjake.com/pages/free-projects Other designs and files are available at:…
A bracket for a 12V socket that can be bought online on auction sites. The bracket fits between the steering head and the air filter on an AfricaTwin XRV 750 RD07. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Print Settings: Prusament PLA Galaxy Black; 0.15mm SPEED; 20% Infill
Printed using eSUN PLA+ Black
Basically just the half height version For Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL Would recommend printing using tree supports for only the half circle. The rest prints just fine.
A simple storage container for the popular BRS 3000 burner to be stored underneath a 100g gas canister inside of the Toaks 750ml pot. The compartments on the sides could be used for storing other small items. There is still room at the…
I stuck this to the bookshelf using 3M command strips. Printed on CR-6 SE using generic PLA. No supports I made this for a Philips remote but can be resized for others. PS5 remote here as well.
Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…