Search results: 7in

Sort order

147 models

P
PrintablesoXiVanisher

Storage case and stand for 7inch HDMI screen

This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
250
Likes
19
Rating
5
P
PrintablesSergey Morozov

Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case

You shoul use a 4 M3x10 screws to secure a screen to the case.

Downloads
1,630
Likes
57
Rating
5
P
PrintablesDavid Smith

Waveshare ESP32-S3 7inch Capacitive Touch Display - Tabletop case

The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…

Downloads
825
Likes
32
Rating
5
P
Printables3D_Project3R

Waveshare ESP32-S3 7inch Capacitive Touch Display Case

This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…

Downloads
696
Likes
24
Rating
0
P
PrintablesJLeyva

BMD 7inch video assist stand

A tabletop stand for the 7 inch models of the blackmagic video assist monitors, both 3G and 12G versions

Downloads
499
Likes
30
Rating
4
P
Printableshackerbijay

Display mount (Cover)7inch HDMI LCD , 1024x600

7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…

Downloads
490
Likes
30
Rating
4.75
P
Printableseponra

Small Mini Sanding Block - chamfered and 0.67in / 17mm wide

Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left. And so i decided to make a shortcut version of this…

Downloads
483
Likes
90
Rating
4.63
P
PrintablesShaggyx86

Raspberry Pi 7in Touchscreen Wall Mount

This is a wall mount for the Raspberry Pi 7" touchscreen. I originally designed this so I could replace my old alarm system panels with a central control panel for Home Assistant. It also has a DHT22 sensor so I can monitor temp/humidity…

Downloads
415
Likes
50
Rating
5
P
PrintablesBoA

Waveshare 7inch display for RPi/RPi zero enclosure with vesa 50 or 75 mount

Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount. You will need: 8x M3x3.9x5.7 inserts (Ruthex M3) 8x M3x6 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better 50x50 mount strength, mount M4 inserts from the…

Downloads
363
Likes
47
Rating
5
P
PrintablesErickSaint

Hosyond 7inch Model H Modular Case

I couldn't find any cases for this screen type from Amazon on any of the sites, so I made one. There is one cutout in the side of the front face to access the rocker for brightness and volume. Be careful installing the screen here, it is…

Downloads
311
Likes
20
Rating
5
P
PrintablesDaveOfTheDead

Simpsons TV / RaspberryPi case Remix 7in screen plus backlight fan and USB

Had someone ask me to build a Simpsons TV but larger than ones already online. So after some searching I found the 3.5 inch version to be best for my needs and scaled it all up to 1.712 then added some brackets to the front face to fit…

Downloads
292
Likes
61
Rating
0
P
Printablesmarkusdd

Sunton 7inch Display Housing (ESP32-8048S070) with rounded corners

Like the original, but faceplate with rounded corners and even frame width

Downloads
242
Likes
10
Rating
0
P
PrintablesStefanN

Sunton 7inch Display Housing (ESP32-8048S070) with Stand (FreeCAD)

The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…

Downloads
217
Likes
5
Rating
0
P
PrintablesBart

Cord Grip 0.7inch/18mm + Cord Grip PG-7

Cord Grip (Wartel) for a 0.7 inch or 18 mm cable. (PLA+) Cord Grip (Wartel) PG-7 (PLA+) With flexible insert ring. (TPU)

Downloads
214
Likes
23
Rating
0
P
PrintablesMIRE

Table top housing for Waveshare ESP32-S3 7inch capacitive touch display

Table top housing for Waveshare ESP32-S3 7inch capacitive touch display https://www.amazon.de/gp/product/B0D2NMCY7K I use it for OpenHASP with Home Assistant, in this case to mainly monitor solar panel power generation, batterie and…

Downloads
195
Likes
15
Rating
0
P
PrintablesQ

WaveShare 7inch Display Case

This is a case for the WaveShare 7" display https://www.waveshare.com/7inch-hdmi-lcd-b.htm It includes a 30mm x 30mm M3 mount point in the back for any bracket you may want to develop for it. Hardware: 4x M3x8 bolts. 8x M3x5x4 heatset…

Downloads
183
Likes
16
Rating
0
P
PrintablesPaulygon

(Standard) HSW Irwin Quick Grip 7in Clamp Holder x4

Whoops, printed the original before I saw the orientation of their honeycombs. I changed the hole to use SHCS instead of FHCS (counterbored hole instead of countersunk). I also added 5 mm to the length so the clamps are less likely to…

Downloads
180
Likes
19
Rating
5
P
PrintablesJulianB

Sunton 7inch Display Housing (ESP32-8048S070)

This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…

Downloads
180
Likes
8
Rating
5
P
PrintablesJbcdu87

7inch Screen Casing

Basic Case for a 7inch IPS touch screen i found on amazon ( https://www.amazon.co.uk/gp/product/B07YJDSCKR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 ) Brand is Jun-Saxifragelec. Friend of mine bought from the same manufacturer and…

Downloads
173
Likes
17
Rating
0
P
PrintablesMr4th

Mark4 7inch accesories

Some accessories for Mark4

Downloads
172
Likes
13
Rating
0

Yamaha XSR 700 7inch headlight

This is a headlight mount for the Yamaha XSR700, mine is a 2019 model. The print is made to fit the original mounting points / brackets and the original bolts. It is designed to (pressure) fit a 7 inch LED headlight. The front can be…

Downloads
171
Likes
28
Rating
5
P
PrintablesTad

HSW Irwin Quick Grip 7in Clamp Holder x4

Printed in PLA, 0.6 nozzle, 0.3mm layer height, no supports needed. Designed for M4 Inserts in HSW. PETG not really recommended, too flexible.

Downloads
164
Likes
26
Rating
5
P
PrintablesMatty O

Raspberry Pi 7in display Case and stand

This case is for the new Raspberry Pi 7in display Works with the recommended assembly. No need to move parts around. Simply screws to the supplied brackets on the display. The back easily clicks off to allow access to the Pi. Great for…

Downloads
164
Likes
29
Rating
5
P
PrintablesDendy

Printable parts for GEPRC MK4 7in FPV drone frame

Frame: Mark4 7inch ( https://www.aliexpress.com/item/1005007050126436.html?spm=a2g0o.order_list.order_list_main.33.1d911802EmF5cR ) Not a add Camera system: Walksnail Moonlight 4k kit. GPS: BN-220 Stack: 4in1 ESC + F405 FC Material:…

Downloads
146
Likes
13
Rating
0
P
PrintablesDee

BMD 7inch video assist stand

Update: Have tested it and found a few parts are not strong enough - redesigned slightly and changed the orientation of the print to solidify it more.

Downloads
136
Likes
12
Rating
0
P
PrintablesKyle3909

Simple 7in Diameter Plant Trellis

This is a simple 7in diameter and .2in plant trellis. Works great with Hoya plants but will also work with other plants.

Downloads
133
Likes
17
Rating
5

Raspberry Pi 7in Touchscreen Enclosure

Turn your Raspberry Pi 2 and Raspberry Pi 7" Touchscreen into a completely custom tablet. This design is still a work in progress. Cable lengths and required hardware have not been tested/determined. Work is still on going to find a…

Downloads
129
Likes
19
Rating
0

ESP32-C6 1.47inch Display Enclosure

The Waveshare ESP32-C6-LCD-1.47-M (ESP32-C6 1.47inch Display) is a really cool easy to use iot device. This basic enclosure lets you place it just about anywhere. I printed it in white PLA so the multicolor LED under the display really…

Downloads
118
Likes
9
Rating
0
P
Printablesideat0m

Reel2Reel empty spool 7inch / 18cm, aka AKAI - AMS

This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…

Downloads
111
Likes
8
Rating
0
P
PrintablesRoart

7in Bowens Reflector with Diffuser and Grid

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Reflector best printed in black and painted white, gold or chrome inside!…

Downloads
110
Likes
15
Rating
0
P
PrintablesMakerJim

Case for ESP32-C6 1.47inch Board

A tight fitting case for the Waveshare ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-Core Processor (Amazon 2025/12). Every case I found that matched this description was way too long…

Downloads
110
Likes
8
Rating
0
P
PrintablesAdam

Pegboard mount for 7in/180mm Knipex Pliers Wrench 86 03 180 - Magnetic

Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…

Downloads
106
Likes
12
Rating
5

Cases kit for Geekpi 7inch Portable Screen V2 (52Pi EP-0186) with attached Pi3b+ or Pi4b

I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…

Downloads
104
Likes
10
Rating
0

Adventurer 7in FPV Drone Frame - 3D Printed TPU Parts

These are all the 3D Printed parts needed to build the Adventurer 7 inch FPV Frame. Available on CNCDrones.com! I recommend printing everything in TPU with decent wall thickness (I typically choose 4 walls). .STL and .STEP files are…

Downloads
104
Likes
5
Rating
0
P
PrintablesMegaCadler

Case for Raspberry Pi with 7inch HDMI Display

A case for Raspberry Pi with 7" 800x480 LCD and HDMI cable. The viewing angle can be changed with the back stand. Holes on the back side provide cooling air as well as access to Raspi Pins and SD card. The side cap can be removed to plug…

Downloads
95
Likes
9
Rating
0
P
PrintablesSunny Galli

Geeekpi 7in HDMI Touchscreen

This is a case and stand for the geeekpi 7in HDMI display. It sits at a 45 degree angle. Two model available, one that uses a 2mm heat set insert, the other for 2.5mm self tapping, to mount a pi to the back off the display. Feet Screws-…

Downloads
87
Likes
5
Rating
0

Santoku Knife Sheath (7in / 178mm blade or slightly larger)

Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…

Downloads
85
Likes
16
Rating
0
P

KEPIFO (JRP7007) 7inch Display-G case

RU: Версия для другого экрана Отличия: кнопки сделаны вертикально, не сделана подставка. Важно - в файлах версия для использования вплавляемых гаек. Из-за странного, на мой взгляд, расстояния между осями крепления - предлагаю сначала…

Downloads
83
Likes
5
Rating
0
P
PrintablesSchandi

Remix for Waveshare 7inch Display

Casebody for Waveshare 7 inch Display. https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C) Only small changes to fit the different Positions of OnOff switch, HDMI Port and a bit space for the electronic on the rear side.

Downloads
80
Likes
9
Rating
0
P
Printablesamckimmey

Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft

Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft I bought from Harbor Freight the Chicago Electric 100 lb. Capacity Welding Cart, simple cart, but wanted to stabilize and space out my welding gas cylinder. I designed this to…

Downloads
79
Likes
26
Rating
0
P
Printablesinvictus0x0

10 inch Rack frame for 7in touch screen

This is 10 inch Rack frame to mount the cheap 7in touch screen from AliExpress. the ones like these, https://www.aliexpress.us/item/3256807246146590.html lcd is attached with m3 screw directly into the plastic. there are two versions…

Downloads
76
Likes
7
Rating
0
P
Printablesideat0m

Reel2Reel empty spool 7in/18cm NAB - aka Sony -AMS

This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…

Downloads
76
Likes
7
Rating
0
P
Printablesideat0m

Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for NAB

This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…

Downloads
74
Likes
9
Rating
0
P
PrintablesRoart

7in bowens Lantern

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Lanterns can be printed in White, or ANY color! Settings Lanterns - 2 walls 10% infill

Downloads
71
Likes
15
Rating
5
P
Printablesskyaee

Voron 7in Touch Screen Display 2020 mount

8 M3 Screws. 4 M3 Heat-Set Inserts. 4 5mm Brass Standoff Nut.

Downloads
71
Likes
11
Rating
0
P
PrintablesDendy

Source One V6 7in DC STEP file

STEP model based on official drawing. Download official printable parts from: https://github.com/tbs-trappy/source_one

Downloads
69
Likes
1
Rating
0
P
PrintablesActoreX

Mark4 7inch Clone DJI O4 Lite Camera Holder

Created camera holder for DJI O4 Air Unit (lite). I used spare silicon inserts (from Volador VX35 build) - you can print 2x bumpers as substitution (scale it accordingly in a slicer) and print it with soft material like TPU. I used 4x…

Downloads
67
Likes
2
Rating
0
P
Printableszane beck

7in klipper screen case

here is a case and mount for a 7 in display for klipper screen. it comes in 2 options. 1 is a vertical case and one is a horizontal case or vise verse if you want to mount on top or bottom. i made it so it can be mounted anywhere on the…

Downloads
66
Likes
15
Rating
0
P
PrintablesNicerdicer

open case with stand for 7inch display raspberry pi 4

I was looking for a more stable stand for my Raspberry 4, which is connected directly to the 7 inch WIMAXIT screen. Unfortunately, I couldn't find exactly what I wanted, so I modeled a suitable stand myself. The stand is an addition to…

Downloads
65
Likes
12
Rating
0
P
PrintableslegoMarine

7in Speed square

An accurate and useful tool.

Downloads
64
Likes
3
Rating
0
P
PrintablesLow-Z

18cm/7inch audio tape reel mmu or single color print created in OpenSCAD

This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…

Downloads
63
Likes
6
Rating
0
P
PrintablesMichael Anthony

Elecrow 7inch Monitor Holder

4xM4 nuts 4xM4 x10 screws 4xM3 nuts or the ones that were in the package 4xM3 x20 screws 1xM5 x60 screw 1xM4 x40 screw 1 M4 wingnut 1 M5 wingnut pull the nuts in with your screws

Downloads
63
Likes
4
Rating
0
P
Printableshesselharmsen

Display Holder for 7inch HDMI-display

This 7inch Display Holder is for the very popular Hosyond 7inch display, especially made for the Raspberry PI. I used this for adding an additional display in one of our Photobooth products. The display is placed in the side of an old 60s…

Downloads
61
Likes
3
Rating
0
P
PrintablesMakealot

Kids 7in Bongo Drum

This is a simple 7in bongo drum with a 0.8 mm thick drum surface. Print upside down at 0.2mm layer height with 4 bottom layers to have a solid drum surface. The rest can be printed at whatever infill density desired. Enjoy!

Downloads
60
Likes
6
Rating
5
P
Printablestomk0014

Raspberry Pi 4 with a 7inch touchscreen

A basic cover + case design for a 7inch touchscreen from FreeNove with a Raspberry Pi 4. Requires 4 long screws at each corner to secure the cover to the case. I made some holes in the case so that you can pass some cables through it to…

Downloads
60
Likes
2
Rating
0
P
Printablesideat0m

Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for Trident

This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "Trident or a Star" and a diameter of 18 cm. I would like to point out that this is a…

Downloads
59
Likes
8
Rating
0
P
Printablesvints

Long G-Scale/Gauge 1 Rerailer - 432mm (17in)

I was unable to find a (re)railer of longer size for my G-Scale trains that I liked. This is a rescaled H0 railer that I shortened and cut to be able to print in only two pieces using the PrusaSlicer cut tool. I've uploaded the whole…

Downloads
58
Likes
5
Rating
0
P
Printablesjambeers

Pivoting Raspberry Pi 7inch Screen Mount

Simple pivoting mount for the offical 7inch raspberry pi touch screen [https://www.raspberrypi.com/products/raspberry-pi-touch-display/]. Perfect for your klipper screen UI or other pi projects. Pivot mount designed to fit on the leg of…

Downloads
57
Likes
5
Rating
0

N scale HYPER REALISTIC HOUSE in parts made for 7x7x7in printers

This house is in pieces for smaller printers to have a easier time and the slicer to recognize the model. Two files one with the main house and the other with the roof and the porches. look at the pictures for instructions. Requires glue…

Downloads
56
Likes
13
Rating
0
P
PrintablesMiniPrinter

Wall Display / Case for Raspberry Pi with 7inch display

Case for a Raspberry Pi with the original 7inch display. Can be wall mounted or stand on a desk. I used https://www.printables.com/model/727545-raspberry-pi-4/files to model the case around it. Thank you @print_byte for providing the step…

Downloads
56
Likes
14
Rating
5
P
PrintablesNick Sparrow

7inch Monitor Arm Desk Clamp

Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to take a look at what the machine was outputting, figured I'd mount a small monitor to my desk. However, after some…

Downloads
56
Likes
10
Rating
0
P
PrintablesDmolinski

Beer Tap Handle for Waveshare 2.7inch NFC e-Paper Display

Using orcaslicer, split to objects, paint fuzzy skin onto exterior, paint support only on bridges of the housing and overhangs on the back panel. 3 walls, 0.4mm nozzle, 0.2mm layers. 3MF file from Elegoo Slicer is attached.

Downloads
53
Likes
8
Rating
0
P
PrintablesMupshot

tbs sourceone 7in.V3 2.4. (ELRS, Ghost etc) antenna mount

T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added

Downloads
52
Likes
5
Rating
0
P
Printablesbhouin

7in LCD Frame

Changed the Front to allow for the second USB port and different mount system

Downloads
52
Likes
4
Rating
0
P
PrintablesAzazel1586

Sovol SV08 7inch screen mount

ok so first off the main brace that mounts to the sv08 itself is from tommy gun on makers world can be found here https://makerworld.com/en/models/533584#profileId-450393 i just added a mount for the 7 inch screen i got also link can be…

Downloads
50
Likes
13
Rating
0
P
Printableseyefly

Tubular 7inch frame - superlight and superstiff - no CNC needed

Update 03.05.22: I beefed up the clamps a bit, so they are more rigid (parts 01-04). Rest has not changed. Note: This frame is work-in-progress. While the basic principle has proven to work perfectly, the "official" 7" version i'm still…

Downloads
48
Likes
6
Rating
0
P
PrintablesRISMcz

laptop cooler 17inch 120mm fan

Laptop cooler 17 inch, in the back is room for 3x 120x25 mm fan There is room for some foam to seal the air to go trough the laptop and not around that will improve performance Now it is ready to print. I will be posting cooler for 16inch…

Downloads
48
Likes
11
Rating
0
P
PrintablesJohnMartin

HSW - QUINN 7in. Self Adjusting Pliers (Harbor Freight)

Honeycomb wall holder for QUINN 7in. Self Adjusting Pliers

Downloads
47
Likes
11
Rating
5
P
PrintablesColin Hickey

Anker 7in1 dock stand

A small dock, i've not made it super tight as i didn't want to mark the dock and so used a little bit of blutak to keep it held in.

Downloads
45
Likes
10
Rating
0
P
PrintablesPackalak

Revolver Stand for 7in revolver

It's a simple build. Use supports and at least 30% infill to ensure the integrity of the structure. Keep in a safe place. This is a presentation stand for a secure area. Don't print this and expect it to keep your revolver secure.

Downloads
44
Likes
4
Rating
0
P
Printablesjimmyapage

27inch MTB Wheel Wall Mount

Simple bracket to mount MTB wheel to garage wall, radius to match wheel and sized to go between spokes

Downloads
43
Likes
8
Rating
0
P
Printableslunny

JRP 7007 7Inch screen with Brass Threaded Insert Holes

You will need 4 x M3 threaded inserts 4 x Spacers assemble and screw in ;) good luck

Downloads
43
Likes
3
Rating
0
P
PrintablesDylan Clark

7in Tall Cup

7in tall by 3in wide cup. Square on bottom transitioning to a nice circular rounded top for ya lips! drink up!

Downloads
41
Likes
1
Rating
0
P
Printableswarpman

Waveshare ESP32-S3 7inch Capacitive Touch Display Case With Battery

A remix of the Waveshare ESP32-S3 7 inch Capacitive Touch Display Case but with a space in the back for a battery. Due to the space in the back for the battery the case is slightly thicker than the original. I also simply tapped the…

Downloads
40
Likes
1
Rating
0
P
PrintablesGildenstern

7inch Pi Screen Legs

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/lU2McMl1FRu Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Doesn't Matter Resolution: 0.16 Infill: 25% Filament: Hatchbox PLA…

Downloads
40
Likes
0
Rating
0

Raspberry Pi Zero Waveshare 7inch LCD case

Weather station source code: https://github.com/marwask/weather-station

Downloads
39
Likes
12
Rating
0
P
Printableskyleireland

Raspberry Pi Touch Display 7inch - Small Stand for Raspberry Pi - 40mm Fan Mount - Display Shell

I needed a Shell/Stand for the Raspberry Pi Touch Display so I decided to make this on Fusion360. This stand fits the Raspberry Pi 3 or Raspberry Pi 4 as they have the same mounting holes. You use the screws included with the Raspberry Pi…

Downloads
39
Likes
8
Rating
0
P
PrintablesDan

SimDT 7inch DDU mount for Moza Front Mount (R16/R21 v2)

I purchased a used SimDT 7inch DDU, the included mount was for Simagic and the Moza one would have been 30 dollars to ship and most likely wouldn't have worked, so I made this, sturdy, has up & down adjustment, and faster than getting it…

Downloads
38
Likes
3
Rating
0
P
PrintablesHulsten

7in Pi screen case (In progress)

It's a work in progress, as I plan to make eventually have cable routing, pi mounted directly to it, etc for a fully standalone unit you can take anywhere. my goal is always to use as minimal parts that you cannot print as possible so i…

Downloads
38
Likes
3
Rating
0
P
Printablessolaris2k

Jun-Electron 7inch Touch Display Stand

I made a basic stand for the Jun-Electron 7" Touch Display that I bought on Amazon. I'm not a fan of the folio case stand it comes with so this will replace it. You can use it with the screen alone with your PC or whatever or attach a…

Downloads
38
Likes
3
Rating
0
P
PrintablesLars Becker

Ikea skadis filament guidance M10 7in1

Latest Update: 13.04.2023 - filament stuck problem fixed the problem that the filament get stucked while trying to giude it through the model. About the model: This model is designed to merge seven PTFE tubes into a single tube, making it…

Downloads
36
Likes
11
Rating
0
P
PrintablesConda

Tukkari Raspberry Pi 7inch Display mount

A simple remix of the Plate mounting bracket for 7" touchscreen case so it can be mounted on top of the Tukkari Printer enclosure. I printed it with Polyterra PLA and it works pretty good. No special settings needed.

Downloads
35
Likes
3
Rating
0
P
PrintablesKuni

9.7inch iPad Pro Functional Stand

This is a stand that holds the screen keyboard of a iPad Pro 9.7 at a tap-friendly angle. Attach with spring-loaded pawls. And this has a mechanism to store the Apple Pencil and eject it by pressing a button. Errors in the model would be…

Downloads
35
Likes
8
Rating
0
P
PrintablesRoart

7in Bowens Softbox with Grid and Diffuser

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Soft box best printed in black and painted white, gold or chrome inside!…

Downloads
31
Likes
3
Rating
0
P
PrintablesTypawesome47

7in Round Puzzle Frame

I made this specifically for a 7in wooden puzzle. Should work with a normal puzzle as well. Cannot use this for pictures. I designed the frame to mount to the picture hanging nails that I have (seen in pictures). If you are using…

Downloads
29
Likes
5
Rating
0
P
PrintablesMupshot

tbs sourceone V3 7inch GPS/VTX antennae mount

made specifically to hold the antennae for a walksnail Micro VTX, but will handle any VTX with dual antennae and a GPS 880 with Compass. This basic design works well with both the HGLRC (my default) and the RDQ 880 GPS receiver. March28…

Downloads
29
Likes
2
Rating
0
P
PrintablesNicval

Waveshare 7in HDMI LCD (H) holder

holder and vesa mount for the waveshare 7" hdmi lcd (H) vesa is 75 and 100 uses m3 inserts holes are 3.5mm

Downloads
27
Likes
3
Rating
0
P
Printablesordnancetech82

7in Pencil Case Retropie

This project contains 3 stl files: component base, screen bezel, and charge port bezel Photos give a rough idea of components and layout Below is a list of specific components needed to build this project Electronic components: Raspberry…

Downloads
27
Likes
29
Rating
5
P
Printablesmakethingswith

7inch Monitor Mount

This is a 3d printed mount to attach a 7 inch LCD display to a spare Phillips monitor mount which came with my 4k display (specifically the 27E1N1800A 4K Ultra HD 27" IPS Monitor). As that's probably quite niche I've included the mounting…

Downloads
26
Likes
5
Rating
0
P
PrintablesMupshot

walksnail Micro camera adapter for 7in sourceone V3

crazy amount of space for an FPV camera, would easily fit a 25mm mini camera. 6mmspacing between mounting holes and meant to flex to hold tension on the camera. allows for a 30 and 45 deg up tilt. Update March 27 2023. 6mm standoff…

Downloads
25
Likes
1
Rating
0
P
PrintablesHohyss

EVICIV 7inch Screen Support for Ratrig Vcore3 (or 3030 profile)

I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…

Downloads
24
Likes
15
Rating
0
P

Raspberry Pi 7inch Screen Mount

Raspberry Pi 7inch Screen Mount by BEAVIS You will need to print two of these, one in mirror. Affixes to the back of the Raspberry Pi 7" touchscreen with small PC type screws. You can see how I used these here: http://bit.ly/BEAVISRasPi…

Downloads
24
Likes
3
Rating
0
P
PrintablesKangarooneering

Replacement Cap for Mainstays 7in Pool Chlorinator

This is a replacement cap for the Mainstays 7in Pool Chlorinator if the clips are broken (Why are they so thin in the first place? beats me). (This cap also looks similar to a cap found on the 7in chlorinator made by U.S Pool Supply so it…

Downloads
24
Likes
3
Rating
0
P
PrintablesJeremy Black

7in Pi Touch for Pi3B+

Remixed the ports to fit a Pi 3B

Downloads
23
Likes
3
Rating
0
P
PrintablesShadow

7inch Camera mount with G3 Instant bracket

Did a remix and added a built in G3 instant camera mount. requires support

Downloads
23
Likes
6
Rating
0
P
PrintablesSte

Gehäuse für Waveshare 7inch Display und Raspi - Housing for Waveshare 7inch Display and Raspi

Das Gehäuse ist sehr kompakt konstruiert. Damit die Kabel zwischen Pi und Display montiert werden können, sind zwingend Winkelstecker erforderlich. Für HDMI die Waveshare Adapter verwenden, für USB habe ich einen 180 Grad Adapter…

Downloads
21
Likes
1
Rating
0
P
PrintablesZ122

Remix of "Back.stl" from "Raspberry Pi 7in display Case and stand" by Bigfella

Remix of "Back .stl" file from the wonderfull "Raspberry Pi 7in display Case and stand" by Bigfella: http://www.thingiverse.com/thing:1413527 Just added a Raspi Logo and a slot for the wire of the Picam. Printed with a Dagoma Discovery…

Downloads
21
Likes
1
Rating
0
P
PrintablesLeHa Design

Vase Sophie – Elegance in Every Curve 18cm/7in

Sophie – Elegance in Every Curve Transform your space with Sophie – a beautifully designed straight ribbed vase that combines functionality and style. Optimized for quick and easy 3D printing, this model is perfect for showcasing your…

Downloads
20
Likes
1
Rating
0
P
PrintablesAmpedFab

Napkin Holder 7x7in

This model is great for just a quick napkin holder but can be edited to add your wall designs. With it printing flat it makes it easy for intricate designs on the side with no supports. It does take a printer on the larger side. I made…

Downloads
20
Likes
2
Rating
0
P
Printablesdisquoveri

Corner shelf - 7in/178mm radius

I saw many corner shelves but not the one I like or needed. Radius is 7in or 178mm. The holes I made are for #6 flat head screws (82 deg)

Downloads
19
Likes
3
Rating
0