5,008 models
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
I have a bunch of Panasonic Eneloop AA batteries and I've learned that they're slightly wider than a standard AA battery. As a result, I figured I'd go ahead and design my own #gridfinity container. I was able to modify Jamie's OpenSCAD…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
A simple to print and detailed model of a small 1980's sailboat The “Oceaan 18" was made by K+S Polyboats in the netherlands. It's a small, sporty sailboat with a cabin big enough for 3 people. It's an inland vessel and not made for rough…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
I completely remade the holder but used the original as an inspiration. Watch out, dimensions are probably different and therefore not compatible with the original. The original design by @kitlaan had "lips" that interlocked together to…
Print approx. €10.65–€13.02 excl. taxPreliminary estimate for PETGSource material: PET
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
Print approx. €1.71–€2.10 excl. taxPreliminary estimate for one variant
Ich habe den Batteriespender auf thingiverse gefunden. Mir hat gefallen, dass da auch ein Deckel bei war. Den Spender habe ich mit Support gedruckt. https://www.thingiverse.com/thing:4752641
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Präzise Arduino HX 711 Filament Waage mit Anzeige des noch verfügbaren Nettogewichtes und Länge. Über einen Drehencoder können verschiedene Filamente ausgewählt werden. Ich habe bereits die Prusament Filamente eingestellt. Das Programm…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Diesemal ist der Adapter variabel. Die Breite kann eingestellt werden zwischen 713-1000mm. Der…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
The Saab JA 37 Viggen (double meaning; “The Tufted Duck”/“The Bolt”) was a multirole jet aircraft in active service with the Swedish Airforce 1972-2005. I just wanted to make one matching my Gripen for some nostalgic reason. This model is…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Isaac. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Created this simple to print and use ESC Mount for the Rlaarlo Omni Terminator Mini 1/10 truck. Allows use of both double sided tape and zip ties - mounting to a rigid structure that uses stock screws.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Remix of https://www.printables.com/model/243424-multi-use-case-with-inserts to hold 12 AA batteries (or any 2 inserts)
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Birthday GIRL - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print file in…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
This is fridge or stand alone organizer for 24 pcs of AAA batteries and 25 pcs of AA bateries. It is ready for instalation 6 pcs of 20x5 neodymium magnets. NO SUPPORTS NEEDED!!!! Magnets are available here:…
Print approx. €27.12–€33.15 excl. taxPreliminary estimate for one variant
Baal Skull Model with Stand Collection: BadAssGodCollection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scaleable: Yes (I have uploaded a pre-sliced file at 50% size, one with 100% and a big one with 130 %)…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Lost. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
sliced with dynamic layer hight and with maximum detail
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant
Super schöner Schlüsselanhänger für Paare.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Can be used as a keychain, car pendant or other decoration. Was by us for a colleague, where it is now hanging in the car. We printed it on the Prusa MK2 using the following settings: PLA (addnorth PLA) First layer 215° then 210° Heated…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
As with any of my designs born out of immediate necessity, I ordered a battery pack online... only to realize I had selected the wrong size. But fear not, here comes the solution. A battery box designed for a single AA battery, capable of…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
Model of glider which Aang used in the series Avatar: The Last Airbender . File .3mf is set with ironing of all upper layers too with a first layer.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Instructions Using the following options:…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
A wall mount for the charger of an Giant or Liv eBike with the GLI180AA charger. I have added the STP file so it can be modded to fit chargers of other brands. I used PLA. It is mounted for one year in the garage and it works fine.
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer:…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
Waage mit Arduino Nano, Hx711, Oled Display, Step-Up-Wandler, Lipo 3.7 Volt, Lipo USB Lader. Die Waage (hier das Modell bis 5 KG) ist erstaunlich genau und präzise. Schaltplan, Codebeispiel und Konstruktionsdaten liegen bei.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Genghis Khan Funk@ P@p Bobblehead. zero post op. NICE.
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
Aufnahme für Küchenwaage unterm Regal/Schrank
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Birthday BOY - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print file in…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Voor mensen die veel tekenen is dit wel een hulpmiddel. Rondjes tekenen zonder passer. Voor mensen die aan meetkunde doen. In 2 kleurern afgedrukt. This is a tool for people who draw a lot. Draw circles without a compass. For people who…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker MMU Crash Bandicoot TNT/Nitro AA Battery Boxes. .3mf and…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
Front turn light cover. Visibility and brightness is much better to the original one (photo exaggerates, but not so much. The light is noticeably brighter for sure). Printing: - Use transparent PETG (I used Transparent Yellow PETG by…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Osfald's model to adjust it for a slightly different shape of 12mm square contacts. See photo. The model is otherwise unchanged, and it fits and holds a single AA battery very nicely. The contacts slide through the bottom of the…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Comboulator Sincropazinator Magilicuddy Tinestick Die. The distracting dice Zaphod Beeblebrox used to help steal the Vogon Ship “Heart of Gold” There are two versions. Regular and Thick.
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for PETGSource material: PET
Number Scale to provide preschool and elementary school children with a basic understanding of quantities and simple equations. "Easy and quick to print. Requires minimal support. You should print the base on its side to ensure the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
My son was designing a model plane that flies on a string. He needed a battery pack that fit into a 24mm circular cavity. I really liked msatbsx's modular design, it is great and flexible to work with. However it was a little too big to…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Very material-saving battery holder for AAA batteries in various sizes for storing 10, 20, 30 or 40 batteries. The honeycomb design is deliberately simple and material-saving and requires only 14g PLA in the 40-piece version or 4g in the…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Very material-saving battery holder for AA batteries in various sizes for storing 10, 20, 30 or 40 batteries. The honeycomb design is deliberately simple and material-saving and requires only 19.5g PLA in the 40-piece version or 5.5g in…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Just a little hexagonal barrel for the AAP 01
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
The key to unlock the Genius G-BAT 300 and Genius G-BAT 400 drives.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Custom design battery tray für AA batteries. 36 battery slots with 18 slot for full/charged 18 slot for empty ones Notice: labels of the two sections is available in german and english.The text is just extruded in .5mm. You have to paint…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
Es sind 4 Dateien, die einzeln gedruckt werden können. Die Farben sind nur ein Beispiel. Die beiden Figuren werden mit dem Herz verklebt und dann einfach in den Sockel gesteckt.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Remote control case. Two versions, one with buttons. The other version only has holes. The case is designed to prevent accidental button presses in your pocket. perimeters: 4 layers: 0.2 I look forward to seeing photos of your prints. :-)
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
Haar-Trimmer-Aufsatz 12mm, passend für Carrera Classic Modell 22163903 Art. 5835
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
The Twi'lek Isa Lia'ry These two Wood Carved Plaques were found and acquired from an abandoned communal cloister on the planet of Ryloth The cloister is associated with the first missionaries that settled there after the first wave of…
Print approx. €12.59–€15.39 excl. taxPreliminary estimate for one variant
A Vent Cover for my air conditioner. The inner diameter is 120mm, outer diameter is 142mm. Hole spacing is 22.5 degrees, 65.5mm off center. The flange is 11mm wide. Thickness is 4mm. It fits this duct hose connector (that's why the…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
The Canon EOS-M series digital cameras, especially the EOS M6 Mark II with it's mirrorless design and 32.5MP ASP-C sensor, is a great camera to get for astrophotography if your not looking for a dedicated astrophotography camera or full…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
With this little wrench, you can open the spring side of some SR Suntour bike forks. I printed it in PETG with 3 perimeters and can confirm it works :) I used PrusaSlicer to close a hole and add an embossing to jcatx' SR Suntour fork…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Hier handelt es sich um ein Frontdreieck zu Ankuppeln weiterer Geräte an einen Claas Xerion 5000 von Siku.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Neu: nun mit Dämpfer Stopfen Um das Risiko zu verringern, dass die Schlauchwaage “überläuft”, habe ich Stopfen in 2 Versionen hinzugefügt: Mit einem sehr kleinen Loch (1 mm) und einem größeren Loch (2 mm). Dazu weiter unten mehr. Ein…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Simple 2d design of the aa12.I will make more guns if you want to suggest them let me know in the comments
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
EN: Power supply 2x1.5V AAA batteries for Christmas star at https://www.printables.com/cs/model/656256-christmas-star-vanocni-hvezda The electrical part needs: - 220 ohm resistance - 3V high luminance LED - 1 pc anode battery contact…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Tangle free 64 AAA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
This is a battery holder that looks like the Great Wall of China . It can carry AAA Batteries; when you take one from the dispensing area, another battery will roll down to take its spot. You can use this to organize AAA batteries that…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
Když se ztratíte v tom, co je nabito a vybito, je fajn si vytisknout pořadač.
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
OctoDaash logo
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Hier ein Modell eines Adapters um die Material Spule sauber auf einer Küchenwaage zu positionieren um sie zu wiegen. Gedruckt in PETG ohne Stützmaterial im Modus 0,2mm Structural. Viel Spaß beim Drucken! Wenn Euch das Modell gefällt würde…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Beim Weibchen (ohne Helm) kann man ein Stück Stoff um die Hüfte kleben (als Rock). you can glue a piece of fabric around the female's hips (as a skirt).
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
Bij de kroningsfeesten in Tongeren droegen veel mensen deze speld om hun kledij op te binden. ook deden ze het rond hun sjaal. Ik dacht dat kan ik ook wel printen. Je kan ook andere vormen en kleuren naar gelang de sjaal toepassen. At the…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The mount on the bit so that it can swing has fallen victim to my sons' play warning. You can renew this with the STL. The old ones that still exist must be removed. Attach with 3.5mm Spax screws about 4mm long and you're done. I printed…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET
Recycling bin for AA and AAA batteries (MMU) khaki green white
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Toevallig gezien in een winkel van een fruitschaal in een ronde vorm met blaadjes heeft mij geïnsereerd om deze potjes te maken. Ze zijn afgedrukt met PLA dat kan je makkelijk vervormen met heet water. Ik heb de print in een grote tas…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
100x160mm sign, reading " Klaatu barada nikto " Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you enjoy these,…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Om aan de kast deur te hangen. Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo To hang on the closet door. Because my wife has so many belts, I make a coat rack…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
This is a diamond painting storage for the standard trays that come with the daimond painting. the tray is 10mm high, 48mm wide, 90mm long. the storage is +-70mm high, 52mm wide, 256mm long.
Print approx. €5.34–€6.52 excl. taxPreliminary estimate for one variant
Meine Frau brauchte eine halter für ihren Lockenstab deswegen habe ich ein Ständer für den GRUNDIG HS6230 erstellt. Gedruckt in PETG
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
EN: Tomas Bata Memorial in Zlin - 1:200 scale kit - contains a slot for two AAA batteries including a mini switch and LED lighting. Recommended printing parameters: - PETG filament (or PLA) - layer height 0.2mm (including the first layer)…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Gemaakt om te voorkomen dat ze in de camper in de kast gaan rondslingeren en kapot gaan
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
Om dat mijn vorig klepje voor de schuifmaat wel sucses heeft dacht ik maak er ook nog een ander, voor een ander merk digitale schuifmaat. Groetjes Ludo. Comme ma précédente housse pour pied à coulisse a rencontré un franc succès, j'ai…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Um meine Küchenwaage schnell griffbereit zu haben und gleichzeitig platzsparend aufgeräumt zu sein. Inspiration kam von einem anderen Modell welches aber überhaupt nicht passte. also …..selbst ist der Mann. Die Halter werden eingeclipst…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for PETGSource material: PET
EDIT: The top came out scratchy for me and the text did not show. I will definitely improve as soon as I can. Hang in there! I will be making an automatic battery sorter, with this ramp, an Arduino or Raspberry Pi, some servo motors, and…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Om dat mijn oude pinda voederhuisje stuk was heb ik er eentje geprint. Je kan het aan de roosterdraad hangen. Er is ook een spie (wig) bij om het potje pindakaas te blokkeren. Het zijn vooral meesjes die er op af komen, de pimpel en de…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
UPDATE, Nu ook om tegen de muur de vijzen, Pindakaashouder vogels voederen. Now also to screw the screws against the wall, Peanut butter holder to feed birds. Porta mantequilla de maní para alimentar a los pájaros. Support à beurre de…
Print approx. €3.57–€4.37 excl. taxPreliminary estimate for one variant
Aang in a kite-car : The Last Airbender :
Print approx. €6.83–€8.34 excl. taxPreliminary estimate for one variant
Funk@ P@p Jesus made with LumaAI. UV displacment in Blender Fixed and prepared in MS3dbuilder. Sliced in Prusaslicer.
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant
The NV-AA1-12 is an airflow amplifier for NF-A12x25 120mm fans that is ideal for boosting their performance in desk and room ventilation applications. Thanks to a three-way airflow amplification system that combines helix energy recovery,…
Tento model jsem vytvářel sám v programu Autodesk Inventor Inspiroval jsem se modelem https://cults3d.com/en/3d-model/gadget/beer-crate-aa-battery-holder Vymodeloval jsem box podle fotek - rozměry nejsou identické STP modely jsou…
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
This space saving battery dispenser is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There is a Voronoi pattern on the sides of the magazine to make it easy to see how many batteries are left. The drawback of this design…
Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
This is a battery storage container, it has holes to maintain the batteries in vertical position which is very practical, for up to 16 batteries. FOR AAA SIZE, GO TO:…
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
General This is a re-upload of my favourite battery holder solution from Thingiverse. The original from there is unfortunately gone (used to exist here https://www.thingiverse.com/thing:4906830 ) I have not made this model, but…
Hier mal ein Modell an alle, die gerne Ordnung in das Batteriechao bringen möchten. Die Kiste fasst 12 AA Batterien und ist stapelbar. Es wird kein Support benötigt. ACHTUNG: LEIDER GIBT ES DA DRAUßEN VIELE WIDERLICHE MENSCHEN, DIE FÜR…
This is a remix of my Rugged Parametric Box to hold AA Batteries. Print instructions Category: Tool Holders & Boxes Summary This is a remix of my Rugged Parametric Box to hold AA Batteries.
This is a battery storage container, it has holes to maintain the batteries in vertical position which is very practical, for up to 16 batteries. FOR AA SIZE, GO TO: https://www.prusaprinters.org/prints/12906-simple-aa-battery-storage-box…
I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…
Practical battery storage trays to keep your drawers clean and organized. No more loose batteries rolling around! 🟧 AA Version: Holds up to 36 batteries (approx. 104 x 94 x 23 mm) 🟧 AAA Version: Holds up to 49 batteries (approx. 93 x 80 x…
![36 slot AA battery container [ENG and GER version]](https://media.printables.com/media/prints/235436/images/2134839_f8fefb79-0d2b-47df-8f52-92d0d6377aec/battery_tray_picture.jpg)
