Search results: acryl

Sort order

594 models

Prusa Printer Enclosure v2 – with MMU2S support - 0.125 inches acrylic version

**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…

Print approx. €14.44–€17.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,587
Likes
437
Rating
4.74
P
Printablesfoxontherun

Skadis / Skådis - miniature paint holder (Vallejo / Citadel / Pro Acryl)

Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
1,240
Likes
161
Rating
5
P
PrintablesKiwi Tinkerer

Acrylic Paint Pouring Flower 10 spouts

Paint Pouring Flower with 10 spouts. The Flowers dimensions are approximately; 70x30 mm. This Flower features unique holding tabs on top to allow easy lifting from the canvas after its used for pouring paint! I recommend printing with a…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
529
Likes
66
Rating
4.8
P
Printablesscubam@xx

Acrylic glass stand with WLED lighting effect

This stand is designed for an acrylic glass plate with a width of 135mm and a thickness of 4mm and a height of approx. 150mm. It is easy to print in two parts and without support. The acrylic glass plate is illuminated with a WS2812 LED…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
11
Rating
0
P
PrintablesMark

Acrylic Front for Polaroid Magnaframe (Magnet Frame)

I wanted to display some of my favorite Polaroids on my staircase wall but I didn't want anything to accidentally damage them. Magnaframe seems to be the only game in town as far as Polaroid wall frames go, but their product doesn't offer…

Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
10
Rating
0
P
PrintablesPaludarium

Using a T8 LED tube, for indirect lightning. (Indirekte Beleuchtung mit LED Röhre und Acryl-Glas)

Four feet, some simple parts, a piece of 800x300x5 acrylic glas, for screws 3x15, four screws 3x40 and a cheap 60cm LED tube, that's all for a smooth light….

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
0
Rating
0
P
PrintablesCS

Acryllic Door Hinge for Kallax

Modification that make acryllic hinges fit IKEA Kallax design

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
0
Rating
0
P
PrintablesPhiMX

Ultracryl Paint rack

This is the official Ultracryl paints bottle rack. Ultracryl paints are still available on Kickstarter through our “Mail for late pledge registration” button. Its modular and can be built in many ways, also it's LED-Strip capable with a…

Downloads
2,230
Likes
268
Rating
3.67
P
PrintablesVladimir Mincev

Silicone / Acrylic / Caulk Smoothing Tools

Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…

Downloads
1,735
Likes
432
Rating
5
P
PrintablesBig B

Silicone/Glue/Acrylic cartridge cap

Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.

Downloads
1,324
Likes
330
Rating
5
P
PrintablesStoneCut

Pen Holder / Organizer for 70x Ohuhu Acrylic Marker Pens

This construction holds 70 pcs of the (IMHO very nice but) fairly inexpensive Ohuhu acrylic marker pens that can either be ordered straight from the Ohuhu website or Amazon and similar sites. Be aware that you'll need 850+ grams of…

Downloads
1,019
Likes
184
Rating
5
P
PrintablesMetikumi

Two hinges to attach an acrylic glass door to a wooden frame

This is a hinge to attach an acrylic glass door to a wooden frame. The provided objects are for a 10mm wood panel with a 5mm acrylic glass sheet, inset by 5mm. The model contains a spacer to compensate for this 5mm inset. If you have…

Downloads
984
Likes
200
Rating
5
P
PrintablesSadteeto

Starlink Mini flatmount with Acrylic top sheet

People have suggested to me to make a fully enclosed flat mount version for mounting on aluminium extrusions … so here it is! This is great for mounting on rooftop, RV ETC. Disclaimer: The Starlink Mini is rated for operation up to 50°C.…

Downloads
981
Likes
58
Rating
5
P
PrintablesJerrod H

Print-in-Place Hinge for 1/8" Acrylic Doors for 4040 Extrusion Enclosure

A simple door hinge for 4040 aluminum extrusion and 1/8" or 3mm-thick door panels . Recommend ¼" or 5 mm bolts for the door, and 5/16" bolts on the side for the 4040 extrusion (8 mm T-slot nuts). Supports are required on the hinge face…

Downloads
816
Likes
356
Rating
3.5
P
PrintablesMatschineggN

Acrylic Paint + Brush Rack

Designed to fit on Prusa Mini and print without supports. Designed to hold the standard 2 oz acrylic paint bottles, 11 brushes, has two 75mm x 35mm trays on top as well as a shallow trough to hold a brush without it rolling away. Holes on…

Downloads
672
Likes
103
Rating
5
P
Printablessr925713

Pro Acryl Paint Color Stand/Holder (30 mm)

Use to store your monument pro acryl paints, washes, etc. Let me know if there are any issues. Original model by Whity

Downloads
638
Likes
60
Rating
4.67
P
PrintablesZenoku

Pro Acryl paint pot holders for Ikea Skadis

This is a perfect solution for your Pro Acryl paint storage. Helps keep that painting desk clean for more minis to take up space. It takes me on my Ender 3 V2 roughly 5 hours to print one.

Downloads
596
Likes
62
Rating
4.25
P
Printablesgameyspirits

Nemesis Retaliation board game insert/organizer (remix) w/ sleeved cards, sangrevores, neoflesh, xyrians, support squad, stretch goals, terrain, untold stories 4, and acrylics

Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…

Downloads
524
Likes
52
Rating
5
P
PrintablesAlan

2020 V-slot pad for 3mm Acrylic Panel

I built my enclosure with V-slot 2020 Aluminum profiles and 3mm Acrylic Panels. Because the slot is 6mm wide, the panels were not very firm within the profiles, so I built these gaps. They also work in reverse, as a regular slot cover :)…

Downloads
524
Likes
214
Rating
5
P
PrintablesLittleTup

Acrylic paint holder

paint holder for cheap acrylic paint.

Downloads
517
Likes
119
Rating
4.2

Acrylic paint holder for Honeycomb storage wall

acrylic paint holder both cover and insert

Downloads
514
Likes
123
Rating
5
P
PrintablesPCHe

Tamyia Mini Acrylic Color bottle opener

I was not possible to find out suitable Tamyia Mini Acrylic Color bottle opener. I found one here on thinguniverse but it does not work. Hence I modeled one from scratch. Just pointing out that this opener works with MINI size (10ml)…

Downloads
495
Likes
60
Rating
5
P
PrintablesGruthius

Lift off Acrylic Door Hinge

Designed this for my 3mm Acrylic door for my printer enclosure. The fittings are friction fitted and so your results may vary depending on the accuracy of your printer. If the top hinges are not tight enough and slip out it will break the…

Downloads
485
Likes
98
Rating
4.67
P
PrintablesNullrush

Skadis Paint Bottle Holders - Pro Acryl

This makes it so you can easily have a honeycomb of proacryl bottles in a skadis. No supports needed

Downloads
482
Likes
61
Rating
5
P
Printablesashmonke

Gridfinity Pro Acryl Paint Holder

A Gridfinity System 3x3 bin for tightly holding 16 Monument Hobbies Pro Acryl paint bottles (or other bottles with 30mm diameter). Update 2024-05-07 Added looser tolerance variation per request. Original models had 30.15mm slots while…

Downloads
482
Likes
46
Rating
5
P
PrintablesWhiteDragonD

HSW modular 35mm / 2oz acrylic paint holder

Honeycomb Storage Wall / HSW I added holders for the 2 oz bottles, Decoart/Folkart/Createx/mica powders. You could cut the heights down if you have a smaller bottle. The key holes are spaced centered on each one so they can be adjusted or…

Downloads
481
Likes
93
Rating
5
P
PrintablesCornbread

Ender 5 S1 Tool Holder (works with Acrylic Enclosure)

Custom toolholder for Ender 5 S1 that has offset for the Ender 5 S1 with the Acrylic Enclosure. T-slot version. Offset helps to clear the handle of the scraper from the acrylic.

Downloads
444
Likes
51
Rating
5
P
Printablesverdrus

Cartridge (caulk tube) lock (acrylic, silicone etc)

To prevent drying out of acrylic or silicone catridges I designed this tool. It has a sealing ring inside. The sealing ring is about 15x10x3 mm German version: Um zu verhindern, dass Silikonkartuschen zu sehr austrocken habe ich diesen…

Downloads
429
Likes
53
Rating
4.67
P
PrintablesTailslide

Acrylic/lexan hinge - small - glue on

Customized version of http://www.thingiverse.com/thing:2187167 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2187167 Instructions Using the following options: enable_auto_pin_size = 1 resolution = 128…

Downloads
410
Likes
18
Rating
5
P
PrintablesFlaJeepGuy

Paint Tray for acrylic paint

You will need to resize to fit your needs.

Downloads
405
Likes
56
Rating
5
P
PrintablesKiwi Tinkerer

Paint Pouring Split Cup 1-5 Set Medium for Acrylic Paint Pouring

Print the base solid and if you have issues with you cup leaking, add a height range modifier in your slicer that just covers the base (1.8 layer height) and enable ironing. cups usually don't leak through walls but more commonly through…

Downloads
400
Likes
56
Rating
5
P
PrintablesAdam Lay

Pro Acryl Multiboard Paint Racks

For holding 31mm paint pots. 2, 3, and 4 row variants of 5 pots wide.

Downloads
398
Likes
51
Rating
5
P
PrintablesAsparukh

3D printable parts for custom acrylic enclosure for Creality Ender 3 V3 KE

Inspired by u/bringmedavid ‘s Reddit post for their Ender 3 V2 enclosure https://www.reddit.com/r/3Dprinting/s/NG5MuPpwxt with some modifications made to some of the parts and size difference to accommodate my V3. My original post:…

Downloads
397
Likes
129
Rating
0
P
PrintablesFrittenpit

Tube Bending Kit for 16mm OD Acrylic or PETG Hard Tubing

If you want to bend acrylic tubing, i recomment to print it in ASA/ABS for better heat resistance. For acrylics, i had the best results with the 35mm bend radius and round walls, but 30mm works, if you heat the acrylic well. If you feel…

Downloads
385
Likes
51
Rating
0
P
Printabless.o.v.a

Easy Acrylic 3d Printer Enclosure

Tools and materials I have used: For starting and ending dremel cuts: Cordless drill Drill bit 3.5 mm (4 mm maybe ok) 60 degree spot drill bit (for high precision drilling) For marking: Milwaukee ultra fine marker Stainless steel ruler…

Downloads
383
Likes
100
Rating
5
P
PrintablesBoone

Gridfinity Acrylic Paint Holder

I recently picked up painting minis as a hobby. With that I saw a great opportunity for Zack's platform. This print will go across a 3x1 grid and will hold 3 of the basic craft paint bottles. If this would help someone else in a different…

Downloads
368
Likes
39
Rating
5
P
PrintablesShinanai

3mm plexiglas acrylic glass bracket

Used those additional brackets for my IKEA Lack enclosure build: https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr

Downloads
359
Likes
50
Rating
5
P
PrintablesPapa No

MLB Acrylic Baseball Card Holder

First project I ever did, built entirely in a slicer meant for a friend who wanted to show off his MLB Cards holds 1/4" acrylic cases

Downloads
346
Likes
24
Rating
5
P

Super Glue Holder Mount (cyanoacrylate aka CA)

I designed this because every tube of CA I open would eventually dry up at the nozzle. But now I get every last drop! Such a simple design you'll want to keep CA everywhere. I made a 30mm (standard) and 40mm base. Simply slide in the CA…

Downloads
335
Likes
38
Rating
5
P
Printablesbernardofls

Acrylic Paint Marker Holder for 36 pens

Penholder for 36 acrylic marker pens, each slot has a diameter of 13.5mm.

Downloads
323
Likes
42
Rating
5
P

(Previous Version) v1 ProAcryl Skadis paint rack

I've updated these to include new sizes please check out the updated versions linked below. Original Description : A paint rack for ProAcryl (and other 30mm diameter bottles) for the IKEA Skadis pegboard. This design took a lot of…

Downloads
321
Likes
57
Rating
5
P
PrintablesBlissa Studios

Acrylic Paint pegboard holder

I designed this paint bottle holder for a metal pegboard with ¼" holes. You'll want to ensure some supports are enabled for the actual pegs as there is a small notch on the back of each one so it will be able to grab onto the metal of my…

Downloads
311
Likes
108
Rating
5
P
PrintablesBladebornStudio

Acrylic Paint Bottle Holder Stand Organizer (9)

A stand that holds 9 2oz acrylic bottles so you can easily store a decent set of basic paints. The model is optimized a bit to reduce material used, and is able to be printed without supports. I decided to make it 3x3 rows for easily…

Downloads
308
Likes
51
Rating
5
P
PrintablesKiwi Tinkerer

Paint Pouring Open Spiral Split Cup for Acrylic Paint Pouring

I recommend printing with a brim to prevent this model from popping off the bed during printing. If you appreciate the model Consider… buying me a coffee . If your from New Zealand and want to support me and or want a quality guaranteed…

Downloads
304
Likes
41
Rating
5
P
PrintablesDSpecter

Sharpie / Acrylic Pen Set Organizer

I made this pen organizer to hold this set of 42 Acrylic Pens sold on Amazon: https://www.amazon.co.uk/gp/product/B07NSMZKQL/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 The holes in the organizer are 12mm diameter and 60mm deep so…

Downloads
304
Likes
81
Rating
5
P
PrintablesNoneYaBidness

Acrylic Paint holder with brush bin

Created a way to hold Acrylic paints and brushes in a more organized method.

Downloads
274
Likes
49
Rating
5
P
Printablesyoungjc

SAPPHIRE PLUS 3D PRINTER ACRYLIC ENCLOSURE HOOD

PLEASE DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Acrylic Size. Top: 367x344mm Sides/Front: 357x116mm Back: 327x116mm Threaded Inserts: 2X - M3x6mm (Cable Cover) 8X - M4x8mm (Frame) Screws: 2X - M3x6mm Button Head (Cable…

Downloads
266
Likes
47
Rating
5
P
Printablesretrorecall

Gridfinity Citadel and Proacryl Paint Holders

Two Citadel paint holders for for Gridfinity, 4x4x3U (holds 25 paints) and a 4x3x3U (holds 15 paints). When used in combination with this fits across an IKEA alex desk drawer. The Proacryl holder 3x3x3U holds 16 paints. Offcourse, they…

Downloads
256
Likes
29
Rating
5
P
PrintablesAksjomat3D

Tamyia Mini Acrylic Color bottle opener - extended

I've extended the handles and gave them a slight angle. Now you have more force and won't hit your knuckles :) Print in PETG for better flexibility. Print Settings Rafts: No Supports: No Resolution: 0.2 Filament: Fiberlogy PETG Category:…

Downloads
242
Likes
69
Rating
4.5
P
Printablesmidego

Door hinges for 4mm acrylic/plexiglass panels

Hinges for 4mm acrylic plates, e.g. for 3D printer boxes. Only 2 metal screws are needed for mounting itself, all other parts are included. Please note the sides as the thread is only on one side at a time: LeftUp_RightLow = left side up…

Downloads
240
Likes
49
Rating
0

Aquarium Plant Holder - Short Version - 5mm Glass/Acrylic

I loved his version, but i wanted someone a bit less wide. 5mm glass/acrylic no supports needed

Downloads
239
Likes
34
Rating
0
P
PrintablesHonza

Acrylic Paint Tubes Holder

I made this simple but usefull holder for my set of acrylic paint tubes. It can hold up to 24 paint tubes, from behind there is space to put down your brushes and other things for painting models etc. The diameter of the holes is 12.5 mm…

Downloads
237
Likes
33
Rating
0
P
PrintablesRM_Commando

90 degree corner bracket with slot for 3mm acrylic/plexiglass

I printed on 15% infill, 0.2 mm layer heights on an Ender 3 V2 and works great. Be careful when screwing in because in the past I've had issues with models splitting in 2. I designed this 90 degree corner bracket holder with slots for…

Downloads
236
Likes
40
Rating
0
P
Printablespaintedgyp

Stepped Organizer for Tamiya X / XF Acrylic Paint (23ml)

Was looking for a stepped type organizer for my small collection of Tamiya X and XF (23ml/40mm dia) line of acrylic model paints and couldn't find exactly what I was looking for to print on my Prusa Mini+, so I made one! Stepped design…

Downloads
234
Likes
43
Rating
5
P
PrintablesDavide

Honeycomb wall_Cyanoacrylate Glue holder

My first model here! The holder have 4 slots for 20gr Cyanoacrylate bottle that usually I use: Dense; Medium; Fluid and spare . A small exagon tubes on the back side should contain the extension tips (capillar probe). Printing…

Downloads
233
Likes
64
Rating
5

Acrylic Painting Pour Star

I saw someone on the tube making a really cool pattern using the bottom of a cup. I didn't have any cool faceted bottom cups, but I do have OpenSCAD and a printer! This is purely a functional item, so I designed and printed with a 0.8mm…

Downloads
232
Likes
24
Rating
5
P
PrintablesKiwi Tinkerer

Paint Pouring Split Cup 1-5 Set Large for Acrylic Paint Pouring

Print the base solid and if you have issues with you cup leaking, add a height range modifier in your slicer that just covers the base (1.8 layer height) and enable ironing. cups usually don't leak through walls but more commonly through…

Downloads
227
Likes
30
Rating
5
P
PrintablesDuempelhuber

Vallejo / Pro Acryl /Citadel / Generic Paint Swatches

For my first uploaded project, I wanted to do something useful for the miniature painting community. I made this paint swatches, holder and stand so it's easier to see what the paint will look like when dried. The swatches are scaled to…

Downloads
226
Likes
55
Rating
5
P
PrintablesGerge

Acrylic Lamp

This is a fun and easy project that involves electronics, 3D printing and laser/CNC engraving. This model supports fully open source workflow CAD: FreeCAD Laser-cutting: Inkscape or DXF2Gcode, Universal Gcode Sender 3D printing: Cura or…

Downloads
226
Likes
39
Rating
0
P
PrintablesYardenSZ

Acrylic Stand

Acrylic Stand for 5 mm tick board with place for generic led cable and receiver. Apparently the actual width in the CAD for the acrylic board is 8.2 but so I don't recall why I did that, so I made a range of file from 3mm to 12mm so you…

Downloads
224
Likes
14
Rating
0
P
Printablesdaclasen

Skadis Acrylic Paint Tube Rack

This is a Skadis Holder for Acrylic Paint Tubes like this one from Arteza or any other Tube with a Cap Diameter of 39mm. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg .

Downloads
224
Likes
45
Rating
5
P
PrintablesPCHe

Brush, cup and Tamiya 10ml acrylic paint holder for scale modelers

I use heavily in my workshop Modular workshop system from Hobbyzone ( http://www.hobbyzone.pl/en/wsm/Hobby+Zone+modular+workshop+pt3this/ ). I love their product. Smart, practical, easy to build. Holder I am presenting here is inspired by…

Downloads
222
Likes
46
Rating
5
P
PrintablesThaliaFP

IKEA Skadis Acrylic Paint tube holder Schmincke

CSD_Salzburg made a great collection of SKADIS addons. I was searching for a holder for the acrylic paint tubes and found none. So I made one myself with the really smart hooks of the set. For this you need 3 x [Skadis_universal_hook.stl]…

Downloads
218
Likes
49
Rating
0
P
PrintablesKathie

Tamyia 23ml Acrylic Color bottle opener

scaled up version of PCHe's amazing opener to fit 23ml tamyia bottles refer to original for instructions

Downloads
213
Likes
29
Rating
5
P
PrintablesNovemberKou

3D Printer Enclosure using 500mm square acrylic panel

I made an enclosure for a 3D printer using 500mm long 2020 aluminum extruded profiles and 500mm square acrylic panels for a partition. Below is a comparison with the enclosure using IKEA's LACK.…

Downloads
210
Likes
63
Rating
0
P
PrintablesMike F

Wonderlands War Deluxe Organizer for Acrylic Boards

Note: this is NOT a “general purpose” organizer for Wonderlands War. It was specifically created to make room for my dual-layer laser cut acrylic overlays , which take up a LOT of space in the box. It also has room for the Shards of…

Downloads
204
Likes
25
Rating
5
P
PrintablesGekoPrime

Golden Acrylic paint organizer storage rack tray for 2oz/59ml and 0.75oz/22ml metal paint tubes

This is a paint rack to store professional artist grade paint in an organized way. I use it to keep Golden Acrylic tubes organized in a drawer but I imagine it would fit other paints as well. Leave a comment if you need models generated…

Downloads
201
Likes
43
Rating
0
P
Printablesperfuzion

Acrylic Paint Pegboard Rack

The original design by gsargent didn't fit standard acrylic paint containers that I use (Craft Smart) so I remixed it have 34mm diameter holes. I created a solid base as well since holes weren't required. The back support wall holes…

Downloads
200
Likes
50
Rating
0
P
Printablesnoahe2194

3D printer enclosure corner piece for 1/8 inch acrylic sheets

enclosure corner piece for 1/8 inch acrylics sheets no supports, PLA

Downloads
199
Likes
35
Rating
5
P
PrintablesMask Pro
Downloads
198
Likes
24
Rating
0
P
PrintablesBryson

Hinge between acrylic and glass panels of aquarium lid

My fish tank came with a very small glass lid. I wanted to cover most of the tank while still having quick access to feed the fish so I cut down some scrap acrylic and modeled this hinge to clip the acrylic panel onto the existing glass…

Downloads
191
Likes
39
Rating
5
P
PrintablesRox

Ultimate 60-Marker Organizer for Acrylic Markers

🎨 Ultimate 60-Marker Organizer for Arrtx Acrylic Markers 🎨 Description: Tired of hunting through piles of markers? Say hello to streamlined creativity! This custom-designed stand holds up to 60 Arrtx Acrylic Markers , keeping them…

Downloads
189
Likes
31
Rating
5
P
PrintablesWillJinks

Brackets for Acrylic Box Enclosure

These are brackets that I used to assemble an acrylic box enclosure for my printer. They are designed to work with 1/8"* acrylic, which can be purchased at any hardware store. If you use all of the screw holes (except the bottom 8!), you…

Downloads
188
Likes
39
Rating
5
P
Printableshunger

Modular cartouche (silicone, acrylique, ...) wall holder

Modular cartouche (silicone, acrylique, ...) wall holder. Individual holders are connected by locks into one. End holders (left or right) do not have a lock. Holders can be placed under each other. I printed models from PETG, layer 0.2, 3…

Downloads
186
Likes
18
Rating
4
P
PrintablesGryfaak

Stand for 2mm Acrylic Sheet

Printed on 0,20 layer.

Downloads
185
Likes
19
Rating
0
P
Printablesthemarv1

Stackable Smaler Skadis Acryl Pen Holder

English: I liked to attach my acrylic pencils for painting figures to my Skadis wall. I liked Kevin LeBrun's design, but found the distance to the wall too big. The holes are 11mm wide, so any pencils up to 10.8mm should go in and out of…

Downloads
185
Likes
33
Rating
5
P
Printablesashmonke

Gridfinity Daler Rowney FW Acrylic Ink Holder

A Gridfinity System 4x3 bin for holding 8 Daler Rowney FW Acrylic Inks (or bottles with 45mm diameter).

Downloads
182
Likes
15
Rating
5
P
PrintablesChris Hill

CORE One INDX acrylic front plate

Update 4th Sept 2026: Added a bung for the holes left by removing the twist locks in the turret. It's a friction fit, but with a taper to keep it in place. Update 2nd Sept 2026: I've now added a remix of the door magnet holder that brings…

Downloads
181
Likes
119
Rating
5
P
PrintablesPjotrStrog

Stand for acrylic photo/woodblock print frame

My first design. It's a simple stand for an acrylic photo frame that can be bought on aliexpress. It is designed for the 254x203mm that is 19.4mm thick. It's best printed on its side. Link to product.…

Downloads
180
Likes
21
Rating
5
P
PrintablesFreakDeBobo

Gridfinity Pro Acryl and Minitaire Stackable Paint Storage

Inspired by DaveHLewis's design https://thangs.com/designer/davehlewis/3d-model/Gridfinity%20Dropper%20Paint%20Bottle%2

Downloads
180
Likes
29
Rating
4
P
PrintablesVincent

Guangna Acrylic Marker Organizer with Print-in-Place Hinge

A compact organizer designed specifically for Guangna acrylic markers. The integrated print-in-place hinge requires no assembly, screws, pins, or magnets. The feet fold away for more compact storage. Features: Print-in-place hinged feet…

Downloads
179
Likes
55
Rating
0
P
PrintablesHonza

Acrylic paint tubes and brushes holder

Little display stand for 12ml acrylics paint tubes and place for brushes, markers, scalpel etc.

Downloads
175
Likes
32
Rating
5
P
Printablesawazawazawaz

Acrylic Paint Marker Holder 36 Count

I found several versions of a neat pen/pencil holder that I wanted to use for my model-painting acrylic markers. I found a version on Thingiverse and used the Customizer to adapt the original 12-pen holder into a 24-pen and 12-pen holder…

Downloads
173
Likes
22
Rating
0
P
Printablesn8

Core One MMU3 mounting brackets compatible with top acrylic panel

Although the lite version of the MMU3 mounting brackets gets the job done, it requires the mounts to be clipped on the lip of the metal top rail. This design prevents the use of the top acrylic panel and interferes with proper chamber…

Downloads
168
Likes
37
Rating
5
P
PrintablesLeynad Jee

3D Printer Case for Anycubic Vyper and others (Aluminium profile & Acrylic)

This is a cost-effective way of building an Acrylic-case with aluminium profiles thanks to the 3-in-1 corner-brackets that connects two profiles and a plate. You need 20 of these and quite costly to buy them. I've printed these in PETG…

Downloads
167
Likes
35
Rating
0
P
Printablesgskollnau

Propeller with stick for stirring paints such as acrylic paint

2 different propellers, clockwise and counterclockwise. First glue the propeller to the stick. Stick is made for cordless screwdrivers with 7 mm drill chuck. Rotation propeller has a diameter of 50 mm, so the edge and the inside of the…

Downloads
165
Likes
14
Rating
0
P
PrintablesMike Graham

Acrylic paint marker holder 60 count

I bought a set of acrylic paint markers and needed something to put them in. This holds 60 markers up to 14mm

Downloads
162
Likes
14
Rating
0
P

Citadel/Pro Acryl rack for Multiboard

These are a series of Multiboard-mountable paint racks that can hold both Citadel and Pro Acryl paint bottles. They all mount to the Multiboard using Multipoints. Print them flat on the bed using autogenerated supports (they should be…

Downloads
159
Likes
20
Rating
4.5
P
PrintablesWarlogh

Tamiya 23ml, AlphaAir and Pro Acryl Holders for My Modular Paint Rack

This is a Remix of my Upgraded Modular Paint Rack/Shelf. I have added 3 more different Paint Bottle/Jar racks. Tamiya 23ml Jar holder . This one is made in two versions, so you can choose which one you like more. Please take a note and…

Downloads
156
Likes
10
Rating
0
P
PrintablesHeavyMetalGuy

Another dice tower (acrylic pipe and cthulu statue)

I modified the beautiful original model to use an acrylic pipe instead of a bottle (outer diameter:90mm, inner diameter:86mm, length: 170mm) and reduced the size of the tray to reduce the overall footprint and accomodate a smaller…

Downloads
155
Likes
66
Rating
5
P
Printablesrinkel

Voron 5mm panel clip for 5mm acrylic panels

Do you need 5mm acrylic panels? not really Does it look cool? absolutely Way more rigid than the flimsy 3mm ones, no bending at all. These are the clips you can use with 5mm panels + 3mm foam

Downloads
149
Likes
15
Rating
0
P
PrintablesMike F

Wonderland's War Acrylic Overlays for Laser Cutting

Acrylic overlays for Wonderland's War player boards. There are two options for you: A - For a simple, single-layer overlay, just laser cut the “WW Overlay.dxf” file and rest it on top of your player board. If you know you're not going to…

Downloads
148
Likes
14
Rating
0
P
PrintablesKubiV

Anet A8 Spool Holder for Acrylic Frame

Anet A8 Spool Holder for Acrylic Frame. Acknowledge that in case of filament getting stuck, the frame might get damaged.

Downloads
146
Likes
10
Rating
5
P
Printablesavipeltz

Acrylic Corner Bracket

2in x 2in x 2in Corner bracket for acrylic panel, used for a drawer

Downloads
146
Likes
33
Rating
0
P
PrintablesHitLuca

Corner connector for acrylic boxes (30x30x30mm)

There's nothing much to say, just a slim corner piece that I created to build an acrylic box. Its sides are 30x30mm

Downloads
145
Likes
27
Rating
0
P
PrintablesKiwi Tinkerer

Paint Pouring Open Split Cup for Acrylic Paint Pouring

I recommend printing with a brim to prevent this model from popping off the bed during printing. If you appreciate the model Consider… buying me a coffee . If your from New Zealand and want to support me and or want a quality guaranteed…

Downloads
140
Likes
21
Rating
0
P
Printablesfouronenine

Acrylic Sheet/Plate Stand (For Pictures or Crafts)

This stand holds a 2.3mm piece of acrylic sheet upright. My brother asked me to design it based on an existing CNC cut piece of acrylic that came with the stand. I designed the gap to be 2.4mm in the slot and the sheet is 2.3mm thick, so…

Downloads
140
Likes
18
Rating
0
P
PrintablesJordi

Lily58 Pro Acrylic Case

Acrylic Case for the Lily58 Pro. Specification 2x plates + oled covers 2x bottoms (optional) 6x walls for a low profile case or 10x walls for a high profile case 4x M2x9mm standoffs for oled covers 8x M2x6mm screws for oled covers…

Downloads
138
Likes
7
Rating
0
P
PrintablesPiotrC

4mm acryl/wood corner bracket

Corner bracket for acrylic or wooden sheets. Category: Tool Holders & Boxes

Downloads
138
Likes
28
Rating
0
P
PrintablesDukeCGN

Plexi/Acryl hole cover for Prusa Printer Enclosure V2

I made the enclosure and wasn´t very happy with the screwed holes in the plexi/acryl for the PTFE Tubes so i made a cover. additional material 4 x M3 10 mm and matching nuts Print instructions Printed in PETG 0,4 mm nozzle 0,2 mm layer…

Downloads
138
Likes
6
Rating
5