775 models
Garden watering can sprinkler / Kropítko na zahradní konev
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for PETGSource material: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Car phone holder base for the CD slot for my purchased holder, the base of which does not fit the Skoda Octavia II. It is compatible with iOttie and Swissten holder (sphere diameter 17 mm). Use M3x18 screw and hex nut to connect body and…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
OŚ Z - do frezarki CNC - zamiast aluminiowej konstrukcji wydrukowany kawałek profilu konstrukcyjnego - Całość w połączeniu z silnikiem krokowym oraz śrubą T8 tworzą mechanizm który porusza osią Z - możliwość montażu zarówno wrzeciona…
Print approx. €14.05–€17.18 excl. taxPreliminary estimate for one variant
zahradní krb 1:87
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
ADN para un posible proyecto de escuela. Facil de pintar y con base solida para soportar el tamaño final
Print approx. €12.31–€15.04 excl. taxPreliminary estimate for one variant
Náhradní víčko pro plovák na chlor z Mountfieldu: https://www.mountfield.cz/plovak-na-chlor-maly-na-20g-tablety-3bvz0249
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
EN: As my Cub Cadet XT3 garden tractor has a fuel tank filling neck at an angle of about 30 degrees, the commonly available straight funnels are unusable for this purpose. That's why I made this gadget, which will probably also be…
Print approx. €6.49–€7.93 excl. taxPreliminary estimate for PETGSource material: PET
Použití filamentu jsem zvolil PETG, protože jako začátečník mám obavy z pokročilích materialu. Doporučuji pro pevnost přidat více perimetrů. Tišteno bez podpor Vnější Průměr je 55 mm( stolu ) a vnitřní je 38 mm ( slunečník)
Print approx. €4.95–€6.04 excl. taxPreliminary estimate for PETGSource material: PET
Základní geometrické obrazce a útvary - krychle, kvádr, jehlan, válec, hranoly, obdélník, čtverec, elipsa, trojúhelník, kruh,…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
EN: Two types of garden latch (normal or reinforced). The first type is made entirely of filament, the second type also contains a hole for the additional inserting a reinforcement made from strip steel with a cross section max. 3x20mm.…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
9 basic objects for teaching Professional drawing, surveying and mathematics for students of the technical fields of carpenter, joiner, bricklayer. 9 základních objektů pro výuku Odborného kreslení, přeměřování a matematiku pro studenty…
Print approx. €10.47–€12.80 excl. taxPreliminary estimate for one variant
The cup holders are designed in two variants: 1. 90x35mm - for a garden swing (two versions - for left or right side and must be printed with supports) 2. 48x25/32mm - for a garden lounger (universal for both sides and must be printed…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Původní vrtulka (turbína) jsou prosté lopatky. Takové řešení, má však nevýhodu v tom, že v ose kde vstupuje proud vody se zároveň všechny lopatky spojují. Doslova tak ucpávají nasávací otvor. Nová turbína však má vstupní otvor zcela…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
Tlač prusa mini, PLA, výplň 50%, potrebné podprery len na podložku.
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
Náhrada za originalní kryt. SHARP model: GF-9292X
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
Vytvářel jsem prodloužení kohoutu k 1000l nádrží s 1" kohoutem kovovým s vnějším šroubením na konci. Protože se mi konev nevešla pod kohout, protože byl krátký. Divné tvarování je kůli převlečení mosazného osazení.
Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant
spare part for the bathroom, shower holder
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
je docela možné že to je remix, viděl jsem to tady a když jsem to potřeboval tak jsem takovýto držák už nenašel. tisk bez podpor.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Ve škole používáme rozkladný transformátor LOGIA. Za ta desetiletí pečlivého zanedbávání jsou cívky v hrozném stavu - olámané, popadané, zkroucené. EDIT : nakonec jsem vymyslel ještě něco jiného: Oprava cívky rozkladného transformátoru .…
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for PETGSource material: PET
Jedná se o náhradní šroubek ke stavebnici bagru Bavytoy. Je to kratší šroubek, který se umisťuje na radlici. / This is a spare screw for the Bavytoy excavator kit. It is a shorter screw that is placed on the blade.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
After years of occasional disassembly and cleaning the original waste adapter in my sink finally broke. Before the shops opened, I had this replacement printed and fitted. This is the bottom part of a waste basin assembly, where the top…
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
SNAIL GARDEN ŠNEK ZAHRADNÍ
Print approx. €7.99–€9.77 excl. taxPreliminary estimate for one variant
Reklamní předmět kapely Ukulele Orchestra jako Brno
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
a clicky thing for holding the rag on the professional mop of our cleaning lady ** cvakací věcička na držení hadru na profi mopu naší uklízečky
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
Žáci navrhnou a vymodelují učební pomůcku - rozkladný model hřídele s nábojem spojený perem. Svůj model následně připraví pro 3D tisk ve sliceru a vytisknou.
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Žáci se hravou formou naučí skládat mapu světa z kontinentů a správně přiřadit názvy, rozlohu, počet obyvatel, nejvyšší horu a nejdelší řeku kontinentů.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
popisky sazenic do záhonů
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Zde je přepsaný text s mírnými úpravami pro lepší srozumitelnost: Pro šroubovici o průměru maximálně 7,5 mm doporučuji tisk z materiálu PETG kvůli jeho odolnosti v zemi. Podpěry nejsou nutné, pouze je potřeba prorazit 2 vrstvy filamentu,…
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
Náhradní pant a držák skleněných dveří do koupelnové boční stěny. Tisk PLA/PETG s velkou výplní. Poté nastříkáno nabarveno chromovou barvou ve spreji.
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Ve škole používáme rozkladný transformátor LOGIA. Za ta desetiletí pečlivého zanedbávání jsou cívky v hrozném stavu - olámané, popadané, zkroucené. Nejprve jsem si nechával navinout nové , ale nechci vyhazovat jinak funkční cívky jen…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
prowadnica do szyny zagłębiarki Mafell/Bosch FSN do Frezarki Festool of1400. Należy do wydruku zastosować dwie nakrętki 6mm i dwie śruby 6 mm w celu unieruchomienia prętów prowadnicy.
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for one variant
Thread a stiff wire or piece of nail through the hole and glue it in place, then hook the handle into the aspirator. Use the most durable filament possible. Brevetti MONTOLIT Battile elektrická vibrační přísavka od 5 797 Kč - Zbozi.cz
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
Vybraní žáci 4. a 5. ročníku si sami zkusí vymodelovat, slicovat a vytisknout čísla, která budou k použití ve výuce pro jejich mladší spolužáky.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Lampa nesplňuje žádné normy.Vytištěno z pedg čiré. nasazeno na trubku HT 50.
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for PETGSource material: PET
Cílem bylo vytvořit rozložitelný držák/stojan na dechové hudební nástroje, které se tradičně díky tvaru obtížně odkládají, zejména pro hráče na více fléten.
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
Cílem tohoto projektu je vytvořit funkční Chladniho desku která bude znázorňovat různé zvukové vlny podle výšky tónu za pomoci písku
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
Žáci pomocí reproduktoru rozvibrují desku, na níž se z písku tvoří obrazce podle nastavené frekvence.
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for PETGSource material: PET
Náhrada za ulámané špičky zahradních solárních lampiček. Průměr 22 mm , délka 80 mm . Materiál PETG . Replacement for broken tips of garden solar lamps. Diameter 22 mm , length 80 mm . Material PETG .
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Zahradní obrubník škálovatelný, stačí jen už hřebík 80mm
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
Náhradní hák pro dětskou kuchyňku (hračku) z Lidl, který využijete, pokud vaše dítě zlomí originální díl. Doporučuji tisknout z PET-G, PLA nemá takovou pevnost a dítě hák dokáže snadno zlomit. Replacement hook for the children's kitchen…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Studenti kroužku Kutil provedli demontáž poškozeného táhla řízení, jehož část chyběla a bylo nutné navrhnout novou chybějící část táhla řízení. Následovalo samotné 3D modelovaní dílu v Fusion 360.
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
***CHECK UPDATES BELOW*** Summary My print: https://youtube.com/shorts/qCkzSldsGnc?feature=share I wanted to challenge myself to design a March Madness trophy, so here's what I came up with. I designed it at 207mm height, and because of…
PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports
This is an organiser, or insert for all currently released (2021. March 09.) expansions of Mansions of Madness first AND second edition. I made it to be compatible with my monster bases, that is findable here: Thingiverse: Mansions of…
Edit 6/29/2024: Thanks to feedback from users Vee and MiniVoeter I've made some changes and updates to the insert! First, it's taken me a while but I've finally designed a complete set of hexagon lids for all existing lidded containers.…
This is a remix of kasey3dsparks - Fire Marker on thingiverse. https://www.thingiverse.com/thing:2578260 I have added a different base, lowered the flame into the base and resized the whole model to 20x20x26mm The idea is to use these 3D…
This is my first 3D design and the first large project I have printed. It is an organizer/insert for the board game Mansions of Madness (2nd ed) with all its expansions (including Recurring Nightmares and Suppressed Memories) fitting…
DE: Eine Radnabenabdeckung für viele Felgen mit einem Durchmesser von 60mm. Bilder folgen bald! ________________________________________________________________________________________________________________ EN: A hub cap cover for many…
Reuploaded from BigMrTong from Thinaverse, i Did not make this model, please read below for their description and support their patreon. A late night kitbash for fun. 80% of parts are just remixes, I have linked all these on the Remix…
These organizers are designed to hold all cards/tokens from: Base Game (2nd Ed) Beyond the Threshold Streets of Arkham Sanctum of Twilight Horrific Journeys Path of the Serpent Inspirations for the designs were taken from err404:…
My sister in law asked for one, so i used vr to make one! The Library of Dreams holds many if not all things, any requests will be met with attempts, for the most part!
With the latest expansion to Mansions of Madness: Path of the Serpent, comes some new terrain pieces. Rubble and overgrowth. Both are remixes, just resized to better fit the token size in the game, not that it really matters. How many do…
Eine Radnabenkappe mit Toyota Logo Wheel center cap with Toyota logo
Update: - (0 4/01/23) NEW v2 Files: I have added a wooden textured floor to the door bases and hinges to both the open doors. You will find these as v2 files which now gives you a total of 6 different doors. I designed these doors after…
I have re-mixed these bookshelves, cupboard and secret passages from thingiverse here: Bookshelves/Cupboard: https://www.thingiverse.com/thing:1974174 Secret Passages: https://www.thingiverse.com/thing:5679446 These were made for Mansions…
These are replacement bases for all currently released (2020. october 27.) monster miniatures from the boardgame Mansions of Madness first AND second edition. The bases work perfectly with my Box Insert / Organiser (Almost like they were…
Player board for second edition Mansions of Madness. Designed for sleaved card and multicolor print withnout MMU. Added clue token as seen in photo.
Pokud se vám stalo, že se vám v průběhu hraní si se stavebnicí Boffin 100, 300, 500 nebo 750 poškodila vrtulka nebo „kříž“, na který se vrtulka nasazuje, tak si můžete stáhnout přiložený model vrtulky, „kříže“ a můžete si je vytisknout…
Doors! This is a set is 16 unique doors for use in your tabletop games. Category: Toy & Game Accessories
A printable version of metric headnuts M4 M5 M6 M8 according to DIN1587. INSTRUCTIONS No supports needed. Recommended: 0.4mm nozzle and PETG M4, M5, M6 → 0.12mm layer height M8 → 0.2mm layer height If you have a good calibrated printer…
I re-mixed these 2 barricade tokens from Thingiverse here: Barricade 1: https://www.thingiverse.com/thing:3615933 Barricade 2: https://www.thingiverse.com/thing:3644315 I have made a textured floorboard base for each and re-sized them to…
I needed an organizer for the complete Mansions of Madness board game with all its expansions and sleeved cards. To fit everything in the four boxes (MoM core box and its three big expansions), I had to put the monsters onto smaller…
I have designed and printed 2 sets of wall tokens for Mansions of Madness (12 in total). This is the second set of 6 which comprises solely of brick walls . Just choose whichever you want (or all of them, why not?). Each wall has a code…
Mój model wykonałem wzorując się na modelu wykonanym przez użytkownika "aroo" - jednak wymiary ogniwa znacznie się różnią jak również kąt łamania całego prowadnika jest jest minimalnie większy. Jeśli ktoś jest zainteresowany plikami…
Update: (02/02/25) Thanks to @3DFlex_579298 There was a mistake found with the v3 stl model. I have rectified this fault and uploaded v4 of the model, to replace v3. Please let me know if you find any other faults with any files. I saw…
Version one is one sided. Version two is double sided (need supports). Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Náhradní figurky do hry Carcassone
Kropítko na zahradní konev průměr 34mm - Sprinkle for garden watering can diameter 34mm
Miniatures of all detectives and monsters from the add-ons suppressed memories and recurring nightmares miniatures. Mansions of Madness Second Edition — Recurring Nightmares: 8 detectives: Michael McGlen, Sister Mary, Gloria Goldberg,…
Kropítko na zahradní konev průměr 25mm - Sprinkle for garden watering can diameter 25mm
Wenn man keine Radzierblenden verwendet sehen die Radnaben oft ziemlich hässlich aus. Die einfachste Option sind Abdeckkappen. Diese ist billig und einfach zu drucken. Ob die auch bei anderen Herstellern eingesetzt werden kann ist…
A collection of Passageways, Bookshelves, Barricades and door/token stand. Update Feb 12, 2018 - Added an easier to print version of the Barricade. This has several changes to address fragile or difficult areas to print. Prints clean…
A great wall art of Sadness (Tristesse), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by…
One part Dreadnaught If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will get free and exclusive model, Etsy shop deal and the ability to vote…
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
I liked the original design of this player board the most, but it always came up too big to print in my Ender3 even with build plate adhesions disabled. I also wanted a player board that took up less space and thought parts of the…
Player unit for a Dreadnaught from TI4
https://en.wikipedia.org/wiki/PlanetSide\_2 Cheers Jace
Starší, ale jednoduše tisknutelná verze krytu zadního světýlka na moped Stadion S11/S22. Sklíčko pasuje a drží bez dalšího spojovacího materiálu. Fotografie ilustrační.
Project made in TinkerCAD. If I should change tags or categories please let me know. I like to give other players something to do when it's not their turn. Therefore, most of the items that you find on my profile will be focused on the…
I have designed and created this set of 5 opaque wall window tokens to replace the cardboard ones in the Mansions of Madness game. There is also a seperate set of solid wall windows that I have created in case you prefer to paint on a…
Hey, this is a free Dreadnought Proxy. Supported files are not included.
This insert includes: Map tile organizer Map accessories organizer (fits expansions) Tokens, dice and character sheets organizer tray (fits expansions) Cards, clue tokens and extra character tokens organizers (personalized for each…
Another Funny Sign - “Decaf Coffee? You mean brown sadness water? ” The one in the photo is printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign easily…
The Dungeon Mayhem: Monster Madness box that is available now is no longer large enough to safely hold the cards and all expansions. This organizer/adapter provides for taller walls to hold the box lid up above the cards.
Mushroom of Madness Scale and print as desired!
Da gibts nicht viel zu sagen, einige der alten Radnabenabdeckungen waren hinüber, also musste Ersatz gedruckt werden (PLA). / Not much to tell about this, some of the old centerwheelcaps where broken down, so a replacement had to be…
These are boxes to be used with the map tiles for Mansions of Madness 2nd Edition and dividers for ease of discovery. The dividers are used to find tiles easily and be able to put them back with ease. The dividers included here do have…
I have designed and printed 2 sets of wall tokens for Mansions of Madness (12 in total). This is the first set of 6 which comprises solely of smooth walls . Just choose whichever you want (or all of them, why not?). Each wall has a code…
These beasts are 286x286. Just barely fitting on a CR10 model bed. I wound up printing them on my Ender 5 Plus which has plenty of room. Each was printed in about 28 hours with a .6 nozzle at .3mm layer height. This design was not my own…
Created to fit space in my Mansions of Madness - Tiles insert / organizer https://www.printables.com/cs/model/464618-mansions-of-madness-tiles-insert-organizer/comments
This is an ornate version of my previous Mansions of Madness player dashboard featuring tentacles designed by the talented @ClayRade . I loved the idea of printing some player dashboards for Mansions of Madness (2nd Ed.), but I couldn't…
I finally finished making this massive thing. I don't plan on making anything remotely this complicated for a while. I printed the front half at 42% scale and it took 2 days. I used the art from B.F.M. (Big Furry Monster) to model the…
Card holder for Mansions of Madness V2 (Without sleeves) Card_Holder.stl: support of 16 slots for spells, penalties, injuries and follies (max 18 follies) Card.stl: Support for 4 slots of 5 cards. Card_Shoe.stl: draw shoe for 4 decks of…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovnou Armadni bednu v meritku 1:12 a 1:10 . Vhodne na diorama, nebo treba na RC auto. Bohuzel na tisk jsou potreba podpory!!! Pokud vás moje práce…
A Fan Made model of the an Asari Dreadnought from Mass Effect! This ship is compatible with the other Asari Ships but it can look pretty cool in the Eclipse livery. The ship is scaled to approximately 1:20000 with 2mm peg holes so it can…
This is a player dashboard to display your cards while playing Mansions of Madness. This will fit on a Ender 3v2 bed. I'm planning on adding embellishments later on. I have included the step file so you can add your own flair. Print…
Easy to print chainguide made specially for the Madnes Atlas frame. Might work with their other frames as well (Nova and Stellar). It's meant to keep the bike quiet and prevent the chain from hitting the chainstay. The outer frame can be…
