Škrtidlo na vzduchovací hadičku k akváriu / Airline tubing clamp for an aquarium
škrtítko na vzduchovací hadičku do akvária ocení každý akvarista
- Downloads
- 82
- Likes
- 6
- Rating
- 0
106 models
škrtítko na vzduchovací hadičku do akvária ocení každý akvarista
Please like and follow and post your makes Color change by layer height to achieve a multi-color sign. Did mine in Tan/White/Red for that real 1980's appeal. Scale by X and Y only. Leave Z in place at 100% otherwise the color changes…
The Problem I am re-doing the airline setup for my aquarium. I needed some of the little airline hose inserts and didn't have any, so my wife said "Why don't you print some?". I looked to do this, but couldn't find any pre-made STLs, so I…
Aquarium airline restrictor to slow or cut off the flow of air from air pumps, useful for: Brine shrimp hatching Raising fish fry Drip acclimating Slowing sponge filter flow Etc. Prints without supports. Sized for 6mm O.D. airline tubing…
Just print on the side with 100% infill. Best with PETG or PC blend. enjoy :)
A set of bookmarks featuring common airliner silhouettes.
Small attachable tray for airline rails. Easy printable, without Support! Use 4 walls and tough infill. PLA is good enough but PETG is best for hot summerdays. Happy Printing😃 and don't forget to leave a like and post a make 🤩
Needed some lightweight rails for my camper to fix interior fittings.
An aquarium airline hose connector for 4mm/5.6mm silicone tubing is a specialized accessory used in aquarium setups. It allows users to connect airline tubing, typically made of silicone and measuring 4mm/5.6mm in diameter, to various…
This 144Wh 100w USB-PD power bank is the the little brother to my 288Wh version . My main motivation was to have a large power bank that I could travel on airlines with. The TSA regulation is 160Wh max . I ended up with this 144Wh power…
Accesorio para rail de anclaje con rosca métrica 6
A simple clamp to hold a standard airline / drip tube (~6.5mm OD). There are 5, 10, and 40 gallon versions included. 2018-04-20: Had some reports of the clamp breaking, so I reworked it on all sizes so it doesn't have to flex as much…
passt nur für: https://www.kurierbedarf.com/Airlineschiene-halbrund-slim-05-Meter-vorgebohrt https://www.kurierbedarf.com/Airlineschiene-Flachprofil-Light-2-Meter Print Settings Printer Brand: Prusa Printer: I3 MK3S Filament: Prusa PLA,…
A fun rocket attachment for a 1/4" Pneumatic quick release fitting. Tested to 8 Bar/116PSI. Flies over 20m, have fun!
Turkish Airlines is one of the best airline company in the world. Many people proud of them. This is a desktop logo for their lovers.
JPG Design3D Endkappe für die beliebten Airlineschienen.
Remixed the mounting hardware from the Thrustmaster model and adapted it for the WinWing Ursa Minor Airliner stick Made a little shorter in the Y axis to fit on my 230x230 print bed. Filled the original holes that aligned for the…
Plug an aquarium airline hose in the marked holes. (inner: 4~5mm, outer: 6mm) Put a hose marked as 💧 in the tank, and blow a hose marked as ≈. (You might need to blow it really hard) Lower the siphon's drain hole from the tank's water…
Airline rail end cap. Perfect for: https://ntg-online.de/shop/Airlineschiene-Zurrschiene-2-x-2-m-2-Meter-halbrund-m-Bohrungen-u-Fitting-Plastik Tight fit. Will not come off easily. Print with supports on build plate only. Deutsch:…
An end cap for a logistic (L) track aka air rail. Designed to wedge into the ends and seats flush and in place due to friction. A CAD model for this style of rail can be found on GRABCAD .
Fake Airline Rail (print and try before buy). Print on the long side w/o supports. For prototyping or as a toy. Disclaimer: This model is for testing purposes only and must not be subjected to static or mechanical stress!
Printable airline rail fastening systems. Two versions available: Fully printable (M10 standard screw thread) With insertion of an M5 steel screw and 2 nuts no support needed
The modular system consits of three parts. The airline_modular_mounting_device.stl which is placed in the airline rail. Depending on the application you can mount different mounting devices at it. In this case…
For airline rails with semi-circular profile - width: 48mm, height approx. 11mm. Print with the flat side facing down, support required.
Steckbare Endkappe für halbrunde Airlineschiene
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Two different eras of American livery included Latest one, after major rebrand Classic one Base included so you can print others and…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Base included so you can print others and create your own desktop organizer of favorite airlines. A version with a hoop for keychains…
Quick and Easy Centering Tool for Airline Cargo Rail for 5mm Drills.
layer: 0.2 material: PC Blend
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . three different versions of Southwest's livery included. A base is also included so you can print others and create your own desktop…
I made this model from scratch, but it was inspired by the models in the links. I wanted it in two pieces with a dovetail joint, so i could store it in my travel bag. I like to use my phone in portrait mode, so I needed a longer shelf to…
I was watching this and saw the trouble a pair of scissors and tape can cause. My model will require some forethought, but it's an option for some. I can't say how long the cutter will work, but it should get you through a trip like this.…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Three different eras of United livery included Latest one, after merging with Continental Nineties with bands of blue Eighties and…
This is a small hose clamp made to connect standard 1/8" ID aquarium airline vinyl hose to a 1/8" barb fitting. I make RC aircraft and do a lot of vacuum bagging. My normal pulls are in the range of about 22 to 24 inches of mercury and…
Siphon end for standard aquarium airline tubing (3/16" aka 5mm) in two diameters. Both options are 15 cm long and print without supports with 0.8mm walls, so they will print solid with 0.4mm nozzles regardless of infill settings. the 3cm…
Each plate is available as an plain OBJ file, which will require color painting in your slicer. Or use one of the 3MF files which are already colored …
I needed to neaten up the airline in the tank, also the current aerator needs to be flat, and the airline was lifting it off the floor. This has a small shelf to put stones or sand on it in order to secure it. Excuse the photos, not that…
This is a flexible / articulated 3D model inspired by a modern Airbus A380–style passenger aircraft ✈ Designed as a print-in-place model , it prints in one piece with no supports, no glue, and no assembly required . Thanks to its…
Two parts so both can be printed easily without support and in the direction giving it most stability. Use PETG for better stability. Have fun and enjoy a nice drink! You will need a M4 nut and a M4x12 countersunk screw to assemble.
I was having trouble with keeping some of my breeder boxes free of detritus settling on the bottom, so I made this little siphon end to siphon very small areas of the box. Just attach it to some airline tubing and start a siphon and…
Each plate is available as an plain OBJ file, which will require color painting in your slicer. Or use one of the 3MF files which are already colored …
Airline rail end cap with M3x12mm screw to secure Print with supports on build plate only.
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
This is a model of the Tupolev Tu-154 (NATO reporting name: "Careless"). It is a three-engined, medium-range, narrow-body airliner designed in the mid-1960s and manufactured by Tupolev. A workhorse of Soviet and (subsequently) Russian…
Turkish Airlines Logo Key Chain
This is just a simple airliner model, I would recommend using supports when printing unless your printer is magical and doesn't need them but enjoy.
This model was designed for the LM Show Christmas Community Print Drive 2024. Add a color swap at 4.6mm height (layer 23 if printing at 0.20mm layer height). Notes: If you are using “Only one wall on top surfaces” setting, you may need to…
These are colored, by layer, Southwest Airlines logo ear savers. They are generated from artwork I found on the web, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a common configuration using the…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
Cockpit file for "Airliner toy set inspired by Airbus A318" with extra details.
I needed the plastic clippy things for the suction cups in my fishtank.
1/4" airline clamps designed to keep your build neat and tidy in areas with limited mounting positions or ares on display. these allow for a mor eprofessional finish to your build, aswell as helping keep the lines from rubbing against…
This is a kit card I designed for fun. The airliner also goes back into its frame to be able to be put on a key chain. The build process is pretty intuitive, but make sure to put the wings and elevator on before putting the two fuselage…
these guides slide onto your flexi airline to help shape and hold the line in place, stopping it rubbing on body panels, kinking the lines or relying on DIY fixtures to hold the line in place. they also improve the look and…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/l1YxVxjrwjv Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Category: 3D Printing
American Airlines logo for office \ workshop
Guides for 6mm airline tubing. They are secured to the side of the aquarium with a 1" D-clip (binder clip). I use them to secure the airlines for my daphnia cultures, but I assume that they can also be used for rimless aquariums or other…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
the card doesn't actually work
Since 1965 we have had a perfect safety record for our flights! Ignore the propaganda in the media! See for yourself our world class service that will help you reach your final destination, even if you aren't certain where that is.
Diese Stütze wurde entworfen um eine Platte in einem Lastenfahrrad auf Airline-Schienen mit einem Abstand von 160 mm zu befestigen. Es kamen 4 Stück zum Einsatz. System: Airline-Schiene Schrauben und Sterngriffe: M8 Scheibe: M8x40 Druck:…
This is a support for a EA style fuselage. I just glue 2 or 3 of them in place along high stress areas (such as the hatch etc) as I fold up the fuselage. It keeps it all very straight and it feels quite rigid even with both sides of a…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Base included so you can print others and create your own desktop organizer of favorite airlines. No supports. You can pause and change…
Printed ASA 50%gryoid infill, 8 walls, 8 top layers. Holds a 25kg Moth sailboat easy at 120kmh
Czech airlines logo for MMU/AMS Without soon!
Delta Airlines for office \ workshop
Airline rail M6 mounting point No support needed
I wanted to mount my daughter's FT Airliner to the wall next to my Legacy V2 so I designed this little bracket. It has two holes for #8 screws and a notch for the nose gear wire to rest in. Print Settings Printer Brand: Creality Printer:…
After designing models with multiple parts that take forever to print I thought I'd try something simple. Have tried to keep (admittedly vaguely) to known design rules. Oh and sorry for getting the origin upside down.
I made this for my airplane rides on one trip we had the standard one piece tray table and it fit great, on the next trip we had a two piece tray table it did not fit on however the magazine holder above the tray table and below the…
Very simple 3 piece model of a 1950's style early jet airliner
Used to install hardline (acrylic) airline tubes to polycarbonate lids for fishtank breeding projects. Designed for 3mm ID x 5 OD tubes for use with standard airline tubing (4mm ID x 6 mm OD) Comes in two pieces for easier maintenance of…
anti air attachment
Hawaiian Airlines logo for office \ workshop
We've recently bought an old trolley which was used on KLM airplanes. Since the trolley is now placed in the entrance of our flat, we wanted to have the ability to hang bags and an umbrella on the side of the trolley. Printed with Prusa…
This is an insert for Airlines Europe. It is thinner than the original box needs and which allows the box to be cut down. See a tutorial video here . Fits sleeved cards.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed fan-art figurine of the Dodo Airlines pilot…
A clip that slides over the top edge of the glass and holds one to three airlines upright in push-in channels on the inside of the tank. Airline tubing that hangs loose drifts across the glass. This holder slides over the top edge and…
Es ist ein ca. 15 × 6,5 cm großes Logo-Schild von Hainan Airlines. Ideal zum Aufhängen. Ich habe es mit doppelseitigem Klebeband an meinen Schrank gehängt. Man braucht ein Mehrfarbensystem. Am besten nimmt man Rot für die Schrift und Weiß…
A 120 x 80 mm kit card, printed flat in one go. Snap the parts off the frame and slot them together into a jet airliner with swept wings, a T-tail, two engines and landing gear. No glue: everything joins with tight cross-lap slots.…
A twin-engine passenger jet that prints as one flat kit card. Snap the 7 parts off the sprue, slot them together and your airliner is ready for take-off on its own display stand. No glue, no supports, no extra hardware. Why it's fun: it…
✈ Take your 3D printing to new heights! Celebrate aviation history with this collection of 13 airline-themed coasters , featuring legendary airlines from around the world, including several that are no longer flying! Perfect for aviation…
This plane is taking roleplay to a whole new level!
a threaded connector you can attach on the EasyReefs suspensions. Maj. ⌀ 15.34mm Min. ⌀ 12.63mm Pitch 2.5mm
Airline rail end cap. Perfect for: https://ntg-online.de/shop/Airlineschiene-Zurrschiene-2-x-2-m-2-Meter-halbrund-m-Bohrungen-u-Fitting-Plastik Tight fit. Will not come off easily. Print with supports on build plate only. Deutsch:…
Quick and Easy Centering Tool for Airline Cargo Rail for 5mm Drills.
Airline rail end cap with M3x12mm screw to secure Print with supports on build plate only.
Used to install hardline (acrylic) airline tubes to polycarbonate lids for fishtank breeding projects. Designed for 3mm ID x 5 OD tubes for use with standard airline tubing (4mm ID x 6 mm OD) Comes in two pieces for easier maintenance of…
This is a flexible / articulated 3D model inspired by a modern Airbus A380–style passenger aircraft ✈ Designed as a print-in-place model , it prints in one piece with no supports, no glue, and no assembly required . Thanks to its…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…