Search results: alex

Sort order

890 models

P
PrintablesPey3D

Gridfinity Base for Ikea Alex

2 or 6 Part Gridfinity base inlay for Ikea Alex drawers with rims for better fit and less wiggle room. Drawer Dimensions 297mm x 525mm should be a nice fit. *Updated to be a bit shorter since for some people it was a bit too large Large…

Downloads
15,412
Likes
1,757
Rating
4.68
P
Printablesprintingbuddy

IKEA ALEX & Malm multiple inserts

Hello all, here you can find a set of different inserts for an IKEA ALEX & MALM office cabinet . I love to organize and have been inspired by Alexandre Chappel in the creation ( Youtube ). He created the inserts for his homemade drawers,…

Downloads
10,660
Likes
7,777
Rating
4.94
P
PrintablesJebidiah_Crumps

Slaughter to prevail / Alex Terrible Mask

jaw hinge pins use m3x12 screws and m3 nuts feel free to use whatever you want for that if those pins don't suit your needs it also allows you to operate the jaw with your chin like the actual mask should

Downloads
6,630
Likes
1,221
Rating
4.93
P
PrintablesDIY Machines

GeoLeaf - 3D Print your own Nanoleaf project - Alexa, Hue and App integration

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…

Downloads
5,012
Likes
4,380
Rating
5
P
PrintablesJeff Lundstrom

Alexa Echo Dot (4th Gen) T800

Original file creator Geoffro https://www.thingiverse.com/thing:4858011 Just some cutting on the Terminator T800 head to allow you to fit the Alex Echo dot (small ball not the large one) 4th gen ball in the model. Thought it was cool and…

Downloads
3,420
Likes
408
Rating
4.67
P
PrintablesLutraVulgaris

Ikea Alex Gridfinity cable bins

Deep gridfinity bins in various sizes to fit the Ikea Alex deep drawers if you need different sizes please let me know

Downloads
3,351
Likes
842
Rating
5
P
PrintablesDL

Echo Dot 4 Stand Alexa Mount Hippo, NEW divided version for easier printing

Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…

Downloads
3,340
Likes
524
Rating
4.77
P
PrintablesWhity

IKEA ALEX Handle

A remix of a design I found on Thingiverse: https://www.thingiverse.com/thing:2939638 I have no need for a label, so I did a redesign without it, which also makes it printable without support, and also made the corners more rounded.…

Downloads
3,339
Likes
1,012
Rating
4.93
P
PrintablesRasor

Screen Accurate R2D2 Alexa Echo Dot 3 Dock

I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…

Downloads
3,231
Likes
590
Rating
4.57
P

Ikea Alex full drawer extension

How does this print make the drawers fully extendable? The Alex drawer is bolted to the sliding rail, and the rails range of motion is the limiting factor here. Replacing the bolt with this printable clip will partially detach the drawer…

Downloads
3,225
Likes
432
Rating
4.78
P
PrintablesRedeix

Alexander the Iron Fist (Pot boy, Elden Ring)

Alexander the Iron Fist (Pot boy) from Elden Ring. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). FDM printer may have trouble especially with…

Downloads
3,020
Likes
291
Rating
4.85
P
PrintablesNotSure

Ikea Alex sorting set

This is a set of stack able sorting boxes. It fits in 3 by 3 into the Ikea Alex draws. But it can be used stand alone too. There are many different types and heights from 30mm to 70mm. Also a dual compartment for a calculator or…

Downloads
2,838
Likes
780
Rating
5
P
PrintablesMino

IKEA ALEX (wide) Gridfinity Baseplate

You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt. The Grid is 14x10 and up to 8 height on the smaller drawer and…

Downloads
2,694
Likes
497
Rating
4.9
P
PrintablesBen

IKEA ALEX "ÅRRANGÖR" - Organisation System for ALEX desk drawers

ALEX ‘ÅRRANGÖR’ IKEA ALEX ÅRRANGÖR ÅRRANGÖR is a Base+Box system which complements the IKEA ALEX drawers, and expands the storage option of any home office. Base System The ÅRRANGÖR base system is a 6x8 grid designed to fit inside an IKEA…

Downloads
2,575
Likes
905
Rating
4.94
P
PrintablesCelta

Drawer Organisers Universal/IKEA ALEX

I wanted to organise my IKEA ALEX drawers and I found this design by vwfan0178 , however, there was a lack of options, so, inspired by this design, I designed a couple more options. I also added a fillet to the bottom because I noticed…

Downloads
2,557
Likes
748
Rating
5
P
PrintablesHelvedo

IKEA Alex Cable Organizer Remix - Bigger Gaps

Hi I remixed the Cable Organizer from Memo since it didnt fit my longer sleeved cables well. There are now 10x 18mm gaps and 2x 10mm its still fits well with the small one from Memo into the Alex drawer, of course the bigger bottom ones.…

Downloads
2,217
Likes
459
Rating
4.86
P
Printablesochm

IKEA Alex drawer unit inserts

For better utilisation and stuff organisation of space in Ikea Alex drawer. Print instructions Print settings: First layer height 0.25 Layer height 0.25 (only joints printed wit layer height 0.15) Minimum travel after retraction 0

Downloads
2,019
Likes
451
Rating
4.86
P
PrintablesTomie M

Ikea Alex Gridfinity Spacers

The V2 Models have tighter tolerances

Downloads
1,976
Likes
454
Rating
4.87
P
PrintablesMemo

IKEA ALEX Drawer Organizer

IKEA ALEX Drawer Organizer, fits just right. In order to fit perfect you need to follow the same layout. Print: 3x - (File 3x5AH) 1x - (File 5x9) 1x - (File 10x3FH) 2x - (File 4x6) 2x - (File 7.5x6)

Downloads
1,946
Likes
548
Rating
4.89
P
PrintablesMemo

IKEA ALEX Cable Organizer

IKEA ALEX Cable Organizer. Print it in 2 sections to fit IKEA Alex drawer.

Downloads
1,723
Likes
419
Rating
4.83
P
Printables3D Printing LaB

Alexa Echo Dot Cosmonaut Astronaut support

use the supports only for the upper slot for the LED and the helmet.

Downloads
1,714
Likes
273
Rating
4.89
P
PrintablesZ3R0-C00L

Alexa Echo Pop Wallmount

Wallmount to Wall mount to mount the Echo Pop on the wall at a 45 degree angle. Printed in PLA

Downloads
1,532
Likes
91
Rating
4.5
P
PrintablesFormiilo

Gridfinity Base for Ikea Alex (wide) drawers

A multi part Gridfinity baseplate that fits the drawers of the wide Ikea Alex unit perfectly. My main focus was to make it fit perfectly without much wiggle room while still being printable on a Prusa MK4 sized bed (25 cm x 21 cm). Print…

Downloads
1,450
Likes
241
Rating
5
P
Printablesrreibel

Kraken Alexa Echo Dot Pedestal - Dot 4

A nice Kraken pedestal for your Echo Dot 4. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Test it by asking your Alexa to “…

Downloads
1,414
Likes
256
Rating
5
P
Printablespcpopper

Gridfinity baseplates for IKEA Alex (skinny) for smaller printers

I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.

Downloads
1,318
Likes
201
Rating
4.94
P
PrintablesBern

Gridfinity Thin Baseplate Set for Ikea Alex Drawers

This is just a set of @kennetek_364826 's openSCAD thin baseplates to fill up and Ikea Alex drawer and fit on the build plate of an Ankermake M5. The picture shows regular thin baseplates (5x3, 5x4, 3x4, 3x3) in red and the backfills…

Downloads
1,316
Likes
193
Rating
4.67
P
PrintablesFONSWERKS

Gridfinity Baseplate for Ikea ALEX (Measurements Fixed)

Pey's design does not fit my drawers well and requires severe modifications to make them fit after printing. I had to saw more than 3mm off the back and sand around 1.5mm from the sides. I wanted to do quite a few drawers so this was a…

Downloads
1,237
Likes
167
Rating
4.92
P
PrintablesDerek Brameyer

Brickfinity - LEGO Storage for IKEA ALEX Drawers

About Brickfinity Brickfinity is a Gridfinity-inspired solution for Ikea ALEX storage units. It's specifically sized for the 6-drawer wide ALEX unit (804.854.23). Because it's sized uniquely, Brickfinity is not compatible with Gridfinity…

Downloads
1,231
Likes
218
Rating
4.75
P
PrintablesWhity

Stackable Assortment System for IKEA ALEX (Parametrized)

Introduction Inspired by Alex Chappel's “Stackable Assortment Box Collection”, which you can find at alch.shop btw. I didn't like the bump at the top of the boxes, as I wanted to have just straight walls. Also I have absolutely no need…

Downloads
1,227
Likes
369
Rating
4.85
P
Printablesrouvenschandl

Ikea Alex Gridfinity cable bins (more variants)

If you need any other size or number of compartments, just let me know! :)

Downloads
1,214
Likes
245
Rating
5
P
PrintablesEstep

Drawer Dividers not only for IKEA Alex Drawer Units

I only use this for the top drawer of my ALEX Drawer Unit, where I have all the tools I regularly use. It is much more fun when you always have all the tools at hand and do not have to constantly rummage for them. You can scale the rails…

Downloads
1,210
Likes
356
Rating
4.92
P
PrintablesJason H

Ikea Alex drawer tray

I like traditional desk drawer trays. Simple, lives at the front, holds my pens or my allen keys for my nearby printer etc. I modelled these after the old school kind but realised that the drawers are two different sizes where the fascia…

Downloads
1,184
Likes
393
Rating
5
P
Printablesuser789

Ikea Alex Gridfnity Base Plate (better fit)

The original model works ok but like many others I had to trim down about 2mm of the S3 and S4 model. The uploaded files have these 2mm cut down (I printed the cut down version again to ensure a good fit). For the basic Alex drawer you…

Downloads
1,182
Likes
150
Rating
5

R2-D2 Alexa Dot 4 Stand

This is the stand you're looking for. If you like my work, please consider joining my patreon with Stand it Up Comics! https://www.patreon.com/Standitupcomics A little stand for the Alexa Dot 4, inspired by the astromech everyone loves.…

Downloads
1,170
Likes
198
Rating
4.88
P
PrintablesUnitedStates3

Robert Echo Dot 4 & 5 Gen Alexa

Is the model edit by RomuloAmericano on https://www.thingiverse.com/thing:4891694 for Echo Dot 4 & 5 gen

Downloads
987
Likes
112
Rating
5
P
PrintablesSKFproject.com

Amazo Alexa Echo Dot Support

Supporto a parete per Amazon Alexa Echo Dot

Downloads
967
Likes
102
Rating
4.75
P
PrintablesCAD With Chris

Ikea Alex Drawer Organizers

A simple modular container system for your Ikea alex drawers! Containers are customizable to whatever size fits your needs. Containers sit in a grid system at the bottom of your drawers to prevent shifting and keep alignment. Handles with…

Downloads
954
Likes
269
Rating
4.8
P
PrintablesKit Strong

Alex Drawer Paint organizers

Various Trays designed hold miniature paints and fit in an Ikea Alex Drawer Unit. Edit: Just added a new tray for holding ArmyPainter/Vallejo/etc.. dropper bottles at an angle for easy selection. It also accommodates the new Ammo Atom…

Downloads
906
Likes
131
Rating
5
P
PrintablesMrFidget84

"Gridfinity Like" Container Frame and Bins that fit IKEA Alex wide Drawers

The original concept by Zack Freedman: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins The more simple/basic version:…

Downloads
807
Likes
102
Rating
3
P
PrintablesJallim

IKEA ALEX Replacement Handle Collection

Handles for the open drawer slots on IKEA ALEX.

Downloads
806
Likes
287
Rating
4.6
P
Printablesmkronmiller

Customizeable Ikea Alex Cable Organizer

I've created a set of cable organizers that can be stored in an Ikea Alex LOWER Drawer. Comes in the following sizes: 0.5x0.5, 1x1, 2x2 Included shim if there is any play in the drawer (can happen with self assembled furniture. A back…

Downloads
787
Likes
349
Rating
4.86
P
PrintablesM. Kanawati

Alexa 4.Gen. Wall Mount

Amazon Echo (Alexa) 4th generation Wall Mount. Two Screws are required to mount.

Downloads
780
Likes
61
Rating
3.86
P
PrintablesChristophe-P
Downloads
764
Likes
187
Rating
4.8
P
PrintablesFikcja
18+

The source marked this model as adult content.

Downloads
738
Likes
130
Rating
5
P
Printablesflok

Alexander Schleicher Ka8-b Glider

This is a detailed scale-model of the popular Ka8 Glider! Facts: Wingspan: 35cm Length: 16cm Height: ca. 5cm Update 06.03.2023 : Reworked geometry at the wings! Especially the thin areas around the trailing edge and the aileron create a…

Downloads
699
Likes
52
Rating
5

Jukebox for ALEXA Echo Dot 3rd Gen Stand - REMIX

This is a Remix from: https://thangs.com/isaacspiers7/Jukebox-Echo-Gen2-Stand-12674 It was adapted using Thinkercad to fit the EchoDot 3rd Generation. I am not a designer, I just played around with Thinkercad and made it work nicely... of…

Downloads
695
Likes
154
Rating
4.71
P
PrintablesTORX1

ECHO 4 Alexa Foot, Bracket

Echo 4 Foot, Bracket Needs a Photo-camera screw, 1/4 "- 20 UNC 8-12 mm long, which is installed in ECHO 4. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,16-0.20 Infill: 30 Filament: Sunlu…

Downloads
694
Likes
151
Rating
4.91
P
PrintablesmisterT

Custom IKEA Alex foot

Custom foot for IKEA Alex. Designed for a total height of 72.5 cm. I used it to build my new desk. Use the hole to fix the foot with a screw (3.0 or 3.5 mm, about 12-16 mm length). Printing You need four feet. Print the pair two times.…

Downloads
688
Likes
211
Rating
4.4
P
PrintablesChristophe-P

IKEA ALEX Handle 2023 V2

Handles for the IKEA ALEX.

Downloads
667
Likes
98
Rating
4.88
P
PrintablesPendragoo

IKEA ALEX Handle

I was looking for a handle for IKEA ALEX furniture to protect drawer content from dust in my workshop. Took me some time to figure out that it was useless to try to match the curved profile from handle Any material will do the job, no…

Downloads
664
Likes
177
Rating
4.9
P
PrintablesJoKeR_1337

IKEA Alex organizer system with drawer & and label field V1.2

I finally wanted some order in my drawer and then I created this design. The parts can be printed up to 0.3mm without any problems. No support is required. The spacer was created because the drawer is too wide for the print bed ;) If you…

Downloads
658
Likes
185
Rating
5
P
PrintablesSupaFletch

Ikea Alex Gridfinity Base Plate Trimmed

I didn't see other remixes before I made and tested the fit on this one. This is a perfect fit off of my BL X1 Carbon and into my Ikea Alex. I trimmed 1.5mm off of parts S3 and S4 (see Pey's originally design linked below). To avoid too…

Downloads
625
Likes
60
Rating
5
P
PrintablesWF3D

IKEA Alex Drawer divider

Please measure your drawer before printing. These are made for the drawers with a exact width of 29,5 cm. Apparently there multiple version of the IKEA Alex with different dimensions. If yours is wider they will be quite loose and you'll…

Downloads
620
Likes
208
Rating
4.78
P
PrintablesMaxT

Snowflakes inside a bauble with name Alex (Christmas tree ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…

Downloads
604
Likes
73
Rating
5
P
Printablestheshiftybadger

IKEA Alex Snap-Fit Handle

This is another remix of @Whity's awesome IKEA ALEX Handle . I wasn't thrilled with screwing in handles, so I modified the design such that the insert was small enough to simply “snap” into place without the need for screws OR glue/tape.…

Downloads
601
Likes
205
Rating
4.71

Wall mount for Alexa Eco Dot.

Check out this simple and efficient method to wall-mount your Amazon Alexa device! Perfect for DIY enthusiasts, using 3D printing with the Ender 3 V3 KE. Budget-friendly and creative innovation at its best! 👉 Follow me on Instagram for…

Downloads
594
Likes
64
Rating
5
P
Printablesopcion3d

Queco O3D Alexa EchoDot4

Soporte con forma de muñeco para dispositivo Amazon Alexa Echo Dot 4

Downloads
581
Likes
66
Rating
4.67
P
PrintablesRedeix

Alexander the Iron Fist (Pot boy, Elden Ring) - No Limbs

Alexander the Iron Fist (Pot boy) from Elden Ring without arms or legs. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). The detailed models have…

Downloads
573
Likes
63
Rating
5
P
PrintablesGuvy

Alexa Echo Dot 4 support for Ikea Skadis

I have use Rkimmell73 peg model on thingiverse. I have print with SUNLU Filament PLA+ orange Just enough to put Echo dot 4 on the Ikea Skadis to be able to work in good condition ^^

Downloads
552
Likes
89
Rating
4.83
P
PrintablesPrintArtisan

Alexa 3rd wall stand

Printed in PETG

Downloads
548
Likes
54
Rating
5
P
PrintablesDOTTORZAUS

ALEXA DUCK

ALEXA DUCK, supporto divertente e comodo per tenere il vostro echodot a casa o in ufficio. Stampate la base del colore che volete e due volte il file duck foot, un pò di colla, unite il tutto e otterrete un divertente supporto per la…

Downloads
542
Likes
135
Rating
5
P
PrintablesAngie

Ikea Alex Drawer Wedge | Fix Sagging

Easy-to-install wedges provide extra support to the bottom of your IKEA Alex drawers, preventing sagging and extending the life of your furniture. Simply screw them into place to prevent the drawer backs from bowing due to the weight of…

Downloads
530
Likes
116
Rating
4.75
P
Printablessvenlaaange

Alexa Echo Dot Gen 5 Plug-in Mount (EU Plug - screw and glueless)

Hi all, this is a Mount for Amazon Alexa Echo Dot 5th Generation. You can slide the power plug into the mount and then plug it into the socket. No need for screws or glue. Supports are only needed for the cable holder. This is my first…

Downloads
527
Likes
80
Rating
5
P
PrintablesPaul

Drawer Tray for IKEA Alex - Schubladeneinsatz

Drawer Tray compatible to IKEA ALEX drawer unit Schubladeneinsatz kompatibel zu IKEA ALEX Schubladenelement

Downloads
523
Likes
75
Rating
5
P
PrintablesBenTeflon

IKEA ALEX Drawer organizer - Battery Holder

Holds AA, AAA, and 9v batteries.

Downloads
511
Likes
105
Rating
5
P
PrintablesMichael

IKEA ALEX SEWING THREAD HOLDER

2 pieces fit next to each other. 100% infill

Downloads
507
Likes
129
Rating
5
P
PrintablesRakete

R2-D2 Alexa Echo 4. Gen (144mm)

Version vor bigger Alexa

Downloads
486
Likes
98
Rating
5
P
PrintablesAxor

Alexa Echo 3rd Generation Wall Mount

A simple and minimalist wall mount for your Alexa Echo 3rd Gen. It only needs 2, 3.5mm screws. The model is filament-saving, it only takes 8grs!. Enjoy! :) Print Settings: 0.2mm Layer Height No Supports Infill: 20% PLA

Downloads
485
Likes
54
Rating
5
P
Printables404

IKEA ALEX drawer extender (open more!)

I wanted my IKEA ALEX drawers to open a bit wider. Disassembled the sliders, brainstormed for a while and made this mod. This replaces the original ball bearing holder to make more room for sliding. It opens around 1.5 Gridfinity units…

Downloads
469
Likes
152
Rating
5
P
PrintablesRasor

Screen Accurate R2D2 Alexa Echo Dot 3 Dock (Separated Colours)

( originally posted on my Thingiverse ) Remix of my origin “Screen Accurate R2D2 Dock for the Amazon Echo Dot 3”, this time I've separated the colours (White, Silver, Blue and Black) so they can be printed and glued into place. The whole…

Downloads
467
Likes
103
Rating
5

Iron Fist Alexander planter

Ever since playing Elden Ring I wanted an Alexander Planter for a house plant, and then I got a 3D printer. I don't like any of the potboy models up here or on other sites, so I sat down and modelled / sculpted him myself in Blender.…

Downloads
459
Likes
27
Rating
0
P
Printablesrreibel

Kraken Alexa Echo Dot Pedestal - Dot 3

A nice Kraken pedestal for your Echo Dot 3. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Test it by asking your Alexa to “…

Downloads
441
Likes
90
Rating
5
P
Printablestrespasser

Ikea ALEX Storage System

The beauty of 3D printing is that it allows for an incredible amount of customization. Browsing the internet, I could not find a storage solution that would fit my needs. Sometimes the storage containers would be too deep, too narrow or…

Downloads
433
Likes
175
Rating
4.8
P

Interlocking Vase Modular Storage Bin for Ikea Alex drawers (1 modules x 3 modules x 3 high)

These are simple, interlocking, modular bins. They come in 3 lengths, 3 widths, and 4 heights. If you don't see the size you want uploaded here, ask me in a message or comment and I'll generate the file. The 3rd height fits perfectly in…

Downloads
423
Likes
189
Rating
4.5
P
PrintablesGleave Makes

Gridfinity Grid for Ikea Alex

Trimmed version of Pey's gridfinity grid for Ikea Alex drawers, I found Peys original files did not fit in my drawers. I physically cut off one side of the ‘wings’ that Pey had added which made them fit nicely. This is reflected in the…

Downloads
421
Likes
45
Rating
4.67
P
Printableswbworks.aus

Soccer Trophy (ALEX)

Soccer Trophy with the name Alex, can easily change the name on the trophy using Fusion360 or a similar program. Prints fine without supports at 100% scale and 0.15mm layer height. Should also print fine with a larger layer height but…

Downloads
419
Likes
30
Rating
4.5
P
Printablesashrafazlan

Headphone Hanger for Ikea ALEX

A beefed up Headphone Hanger for the ever popular Ikea ALEX. Braces are added underneath to support heavy headphones like Audeze's LCD line. I recommend adding 1-2 extra perimeters to really strengthen this print. Original design based…

Downloads
412
Likes
95
Rating
4.92
P
Printablesrreibel

Alexa Echo Dot Claw Foot Pedestal

A nice claw-foot pedestal for your Echo Dot. Print as is for Echo Dot 4, or at 120% for the Echo Dot 3. Remixed from https://www.thingiverse.com/thing:1307300 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…

Downloads
407
Likes
90
Rating
5
P

Gridfinity Scissor Holder (IKEA Alex Compatible)

Remix of dawnerd's Scotch Scissor Gridfinity holder for use with IKEA Alex drawers.

Downloads
406
Likes
83
Rating
5
P
PrintablesHelvedo

IKEA Alex Headset Holder for 16mm thick drawers

Hi i remade this Headset holder for the IKEA Alex Drawer mine was 16mm thick so the original one didnt fit. hope that helps some of you printed in eSun PLA+ with the generic PLA set on the Bambu Lab X1C

Downloads
404
Likes
65
Rating
5
P
Printablessakabug

Ikea Alex Drawer Organizers

Divider system for wide IKEA ALEX drawers (or basically any drawer). Basic unit (1) equals 50 mm. Smaller 3/4 unit and 1/2 unit wide blocks give you 12.5 mm resolution for each drawer width. Slots height is 47 mm. Current total 460…

Downloads
401
Likes
126
Rating
5
P
PrintablesFabian

Sorting Boxes Ikea Alex

Einfache Sortierboxen für die Werkstatt oder das Büro. Die Sortiment Boxen passen perfekt in das Ikea (Alex) Schubalden Element, hier für müsst ihr nur für eine Reihe 2x Box_10x10 und 1x Box_9,5x10 drucken. Die seitliche stärke der Boxen…

Downloads
401
Likes
111
Rating
5
P
PrintablesJazz

Ikea Alex Cabinet Drawer Handles - Remix

I really liked the handle remix by Whity as it gives me the look I wanted for the drawers. Unfortunately, for my version of Ikea Alex purchased in the USA in 2023, they don't fit quite right. The handle sits slightly proud since cut-out…

Downloads
395
Likes
70
Rating
5
P
PrintablesMarkus710

IKEA ALEX drawer Tags

You can print ist by laying it on the back. because of the 45° angle there shoud be no problem

Downloads
393
Likes
148
Rating
4.43

Llavero nombre Abdoul,Adriana, Ainara, Alba, Alexia, Breixo, Candela, Carmen, Celia, Claudia, David, Diego, Enma, Gael, Heyli, Lia, Lois, Lucas, Mar, Marc, Martina, Mauro, Mikel, Naia, Nayra, Noa, Pepe, Pedro, Samuel, Sara, Teo, Valentina, Xavi, Xoan, Zoe

Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…

Downloads
392
Likes
22
Rating
5
P
PrintablesEstep

Sliding Tray For IKEA ALEX Drawer Units

I made this tray for some of the tools I use regularly. Option 1: If you have a printer that is capable of printing parts that are 320 mm wide you only have to print the Complete.stl You will also need 4 Self-adhesive felt pads, about 3…

Downloads
391
Likes
216
Rating
4.5
P
Printableskarmabass

Gridfinity IKEA Alex Spacer with Snap Connectors

This is the equivalent of @TomieM 's Alex drawer gridfinity spacer, except this one is a remix that snaps onto @Neel_18926 's snap connector base plates for a more snug fit with less shifting around. I highly recommend Neel's plates for…

Downloads
387
Likes
31
Rating
5
P
PrintablesOld Lady

Alexa Echo Dot 1. Generation Wallmount

Bracket for vertical wall mounting of a 1st generation Alexa. Printed with PLA.

Downloads
384
Likes
47
Rating
5
P
Printablesskeedy

Gridfinity 2x7 base for Small Printer - Fits Ikea Alex Drawers

I printed the gridfinity baseplate for my IKEA Alex Drawers using the remix by pcpopper for small printers. Their model is 7x10 and I realized that I could add 2 more rows of grid plus a spacer to keep the base from sliding in my drawer.…

Downloads
375
Likes
45
Rating
5
P
Printablesmemory_null

Ikea Alex Handle

This is a recreation of Jonatan's Ikea handle remix in Fusion360. Included is the F3D parametric file.

Downloads
364
Likes
105
Rating
5

Alexa Wandhalter

Einfach an die Wand montieren , die Alexa lässt sich dann in der Halterung drehen.

Downloads
364
Likes
57
Rating
5
P
PrintablesAndyG68

IKEA Alex Inlays Organizer

Aus der Reihe “Ordnung ist das halbe Leben” hier einige Inlays für die IKEA Alex Schubladen. Gedruckt in PLA mit einem CR-10 Smart Pro und 0.6 Düse (0.4 geht auch, dauert aber deutlich länger) Die kleinen Füße (einfach duplizieren auf…

Downloads
362
Likes
67
Rating
0
P
PrintablesSquirtle

Ikea spacer for ALEX drawer and KARLBY plate

Spacers for the commonly used Ikea Alex and Karlby desk setup. You can hold the spacers in place with 4x T25x25 screws.

Downloads
361
Likes
94
Rating
5
P
Printablesrreibel

Tree Stump Alexa Echo Dot Pedestal - Dot 4

A nice tree stump pedestal for your Echo Dot 4. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Remixed from:…

Downloads
360
Likes
54
Rating
5
P
PrintablesWintermute

Replacement Feet for IKEA Alex Drawer Unit

This part is a replacement for the feet on older IKEA Alex drawer units. I created this part when I damaged a foot on one of my IKEA Alex units while moving it and didn't want to wait for IKEA to send a replacement part. It's friction…

Downloads
340
Likes
14
Rating
5
P
PrintablesNotCrazyFPV

Modular and stackable Electronics Organizer Box System inspired by Alexandre Chappel [last updated: 2022-11-18]

An in OpenSCAD designed electronics organizing grid-box system. You can export a box of any size. All boxes are stackable. The outer size of a box is always a multiple of the size of the base unit (1x1x1). Have a look at the Github…

Downloads
339
Likes
66
Rating
0
P
PrintablesCatCapricious

Embroidery Floss Organizers for IKEA Alex Drawers

These floss organizers are designed to fit into the wide, 6-drawer Alex drawers from IKEA. Each cubby will fit 2 full bobbins with a little room to spare for storing leftover working strands on their own bobbin. I designed these…

Downloads
334
Likes
107
Rating
5
P
PrintablesLedeev001

Scalextric car wheel

My 1997 Scalextric Escort Cosworth's wheels were looking a bit tired and wer loose on the axle, so I designed these 8 spoke replacements. The standard slick tyre fits straight on. NOTE: They're a tight fit. Now my Gossie is back on the…

Downloads
333
Likes
19
Rating
0
P
Printablesmemory_null

Ikea Alex Legs

Wanted some tall legs to lift my hardware drawers off the floor. These are 125mm tall and the hole lines up with factory hole for the casters. I designed these for the 26"w cabinet…

Downloads
324
Likes
118
Rating
5
P
PrintablesCaseyMcLovin

Gridfinity Base for IKEA Alex (Wide) Drawers

Description This multi-part Gridfinity baseplate has been redesigned to perfectly fit the wide IKEA Alex drawers. The primary goal was to achieve a snug fit with minimal wiggle room while ensuring compatibility with a Prusa MK3+ sized…

Downloads
323
Likes
37
Rating
0