868 models
I did like the original design, but I did not like the support in between. Now there is a two part version which prints with minimal support or even without. Just screw the two parts together with M3 screws and M3x5mm brass inserts. I…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder for the amazon alexa 3rd generation, to hold it using the UK plug that comes with it. There is space behind the alexa to hold the power cable Supports are required, i used the tree supports which were easy to break off,…
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for one variant
Hi there, thank you for looking at my HEPA filter model for the Original Prusa Enclosure . There are many similar models but I wanted to build and share one specifically to fit this enclosure with parts cheap and readily available on…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
Added Airtag slot to the banana. I do not have an AirTag, I made this for a friend. I am not sure if it will fit, although, I know the remote does.
Print approx. €7.97–€9.75 excl. taxPreliminary estimate for one variant
Remix resized to fit different beard brushes. Everyman Jack Beard Brush from WalMart and a similar oval beard brush from Amazon - Kootinn Boars Hair Beard Brush. Sized to fit 110MM X 57MM X 35MM brush.
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET
Amazon induction pad charging support
Print approx. €9.78–€11.95 excl. taxPreliminary estimate for one variant
Amazon with decapitated head Amazzone con testa decapitata
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
13/01/2025 File STEP added This is a cover of Amazon's Fire TV Stick remote control. TPU is mandatory as the material to be used, otherwise the remote control will not fit. In addition to the STL file, I also attach the 3MF, so as to take…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
Re-Upload: https://www.thingiverse.com/thing:4182196 Now the zip package should contain all files. I don't know why the archive is incomplete and the stl files are not shown in the preview. While searching for an Echo Show 5/8 stand i…
While searching for an Echo Show 5/8 stand i found a few here, but none of them really fits my needs. So i decided to design an own with the best of all worlds in my point of view. The design includes four pieces: Stand - print standing…
Tie fighter made to hold Alexa Dot 2 may work with Dot 1 as well but dont have one to test. Working on finishing the version for the newest dot as well. designed the wings to lock into place and use 2 screws each side m2x8mm. The wings…
Da mir keine Steckdosenhalterung für den Amazon echo dot 4 gefallen hat, habe ich selbst eine konstruiert. (Hier in einer Busch Jäger Steckdose.) Alles bezieht sich auf die EU Version! Ich weiß NICHT ob es an die US Verison passt! Alles…
Remix of the Prusacaster. The core has been modified to accept an Amazon Tele kit. I filled in the hexagons to create pockets to pour epoxy into. I also added slot for square nuts to attach guitar strap posts. ☑ Build and Demo Video ☑ ☑…
0.2mm Layer hight 20% infill No Supports needed
I printed this on my Prusa Mini+ in PETG with 0.2mm layer height, 50% infill, and supports enabled everywhere.
A simple enclosure for the Echo Show 5 gen 1 or 2 to dress it up a little while reducing the screen angle a little. This makes the Echo show much more usable as a bedside display. All features remain usable, but the slider for disabling…
Amazon Alexa Echo Dot 3rd Gen basic wall mount. Secure with two No6 countersunk screws
General: There was no wall mount which checked all my needs, so I designed this one. The power connector is hidden behind the cover, nevertheless you can still access the buttons for power and volume. Mount instructions: First, you have…
Vintage Jukebox cover for Google Home Mini & Amazon Echo Dot (experimental) Wurlitzer (for those who do not know) is the oldest and the most popular brand in jukebox sector. Actually there is no such a jukebox in real world and virtually…
Da der echo pop nun im Angebot war, habe ich für dieses kleine Teil nun auch eine solche Halterung entworfen. Da ich so wenig wie mich in der Tiefe aufbauen wollte, habe ich den echo pop diesmal über dem Netzteil platziert. Also wenn man…
Stand for Amazon Echo Show 8. Remix of Base.stl from https://www.thingiverse.com/thing:4100300 Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal Rafts: No Supports: No Resolution: 0.25 Infill: 8% Gyroid Filament:…
Please comment, rate, and post a make! All product links are affiliate links. This is a remix of the best Fire HD tablet mount for the new Fire HD 10 . Changes: Fully constrained and named sketches (can be resized without other parts…
Printed with PLA , time: 3h 12s nozzle: 0.6 mm layer height: 0.32 mm infill: 15% (Triangles) speed 80 mm/s overhangs speed 25%
Wanted to mount my echo show 5 under kitchen counter but couldn't find the style I wanted so created one. Thanks to Dan for the Echo Show 5 model (https://www.printables.com/model/35715-amazon-echo-show-5-model) which is where all the…
I got the new Amazon Echo Show 5 for my RV/motorhome and as space is limited I wanted it off the counter and under the cabinet in the bedroom. I designed a mount that has a mesh back using PrusaSlicer's modifier mesh (.amf attached has…
The original model by FruitieX was great but I found that my Amazon Basics AAA and AA batteries didn't fit so I changed the couple battery size parameters in the Fusion file to get the fit right. Posting both the inserts and the base, I'm…
Just a holder for the newest Fire TV remote. Just stick double-sided tape on another side :) No Supports, 15% Infill, PLA, super simple :)
I made this organizer for Life of the Amazonia by Bad Comet Games. I tried some new closing mechanisms, nothing needs magnets and everything should have tolerances to fit different printers. Sleeved with Sleeve Kings Mini Euro Card…
Update 2024/01/09 This model is accurate for the Gen 1 and Gen 2 Echo show devices. The Gen 3 devices launched in 2023 is a different shape. Thanks to Dorkvafer97 for pointing this out. Update 2020/01/28 Thanks to waschbaerbauch75 for…
This is an Echo 4th Generation Stand, inspired by HomePod Stand by FANBOY by malencar https://www.thingiverse.com/thing:3943055 Please head over to him and give him a like and some love for his great work!
Re-Upload: https://www.thingiverse.com/thing:4182196 Now the zip package should contain all files. I don't know why the archive is incomplete and the stl files are not shown in the preview. While searching for an Echo Show 5/8 stand i…
Wall mount for Amazon Echo Dot 1-2 generation You can use two screws or tape. Print instructions PLA Infill 15%
A friend asked if I could design one after they saw one online for sale (printed) but they were charging a lot of money for it. He wanted it in the Miles Morales colours, but can easily be switched over for classic spiderman. You'll need…
Created an Atlas holder for Amazon Alexa gen 4 and 5 , cable canal is a bit rough as it is my first remix/edit of a stl file In order to connect the cable to the speaker you have to wiggle it a bit till its in
If this is being used in a car you should choose a filament that will not soften in the heat. PETG and ASA/ABS recommended. OnShape File is at the linked location , Feel free to modify. Print Settings I had good results with the following…
A Wall Mount for the Amazon Firestick Remote Control Printed in Tinmorry Black Matt PLA i wanted to upload the *.stl but the website tells me its an invalid file format ? -_-, so i opened it in cura and saved it as *.3mf ( ignore the…
I modified the Spaceship Earth model to hold an Amazon Echo Dot (2nd gen). Holes were added to let sound out of the bottom mounted speaker and a hole was added to access the USB and audio jacks on the back side. To align the cover with…
✨The multicolor 3MF files for both the normal version and the keychain version are now available on my Patreon! 🎨 ⏳Don’t wait too long—they’ll expire on January 31, 2025. 💾 🚀By supporting my Patreon , I can continue offering free models.…
I couldn't find anything to mount the Amazon Echo Show 5 underneath a cabinet so I created this. The Echo Show sits perfectly on the notch preventing it from sliding off. There are two slots on the back of the print for cable routing.…
It's just what the world needs; another mount for a second generation Amazon Echo Dot! Print instructions This mount was made specifically to hold a second generation Echo Dot on the underside of a shelf or cabinet. The Echo Dot fits in…
Spare Gears for Tchibo Vollautomat coffee machine from Amazon. 10 teeth, 22 teeth and 24 teeth. printed: 0.1 layer height 0.2 layer with The teeth on the gears broke and I drew new ones. I printed them with PETG material and they worked…
Designed to be light and stylish, can be freestanding or wall mounted with a 3M Double Sided Sticky Pad (15mm x 15mm) Easy to print and shouldn't require a brim or glue, but that depends on your printer. Only 11g of filament needed,…
Epic female warrior miniature with sword and rocky base, perfect for painting and fantasy tabletop display. Description: Bring power and elegance to your collection with this Epic Female Warrior – Fantasy Paintable Figurine . The model…
12 posses with different combinations of all 3 armor tiers and various weapons. Light armor has two extra ornamental options. Two fitting helmets are included, both also adorned with extra floral ornaments. I have given them more feminine…
I designed this bracket after I dug out my old dual-monitor arm desk clamp for my partner. I had 2 monitors for her but I could only locate one of the mount plates for it. I trawled the internet and even asked Chat GPT to search for me…
Tired of losing my Amazon Fire TV Stick remote control down the sofa, this effectively solves that! Also the original remotes are quite fragile so this helps toughen them up quite a lot. Includes a handy poke hole to eject the remote when…
Please comment, rate, and post a make! Update 12/14/2023: Resized parts to fit on smaller beds. This is a remix of the best Fire HD tablet mount. Changes: Fully constrained and named sketches (can be resized without other parts getting…
Amazon Basics Tripod Adapter Plate for the following tripod: (https://www.amazon.com/AmazonBasics-60-Inch-Lightweight-Tripod-Bag/dp/B005KP473Q), meant to be used with the following screws: (https://www.amazon.com/gp/product/B00IXDECV4)…
This model is a stand for the amazon echo dot 4 or 5.
PLEASE READ CHANGELOG BEFORE PRINTING There are 2 “darkgreen” files depending on the measurements of your bridge mounting holes. The Amazon Minicaster I wanted to print the Prusacaster, but my printer was slightly too small to print the…
CONSIDER DONATING https://paypal.me/JuanCMedina21?locale.x=en\_US Print slow for best results. Print Settings Printer Brand: Creality Printer: CR-10 MAX Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: OVERTURE TPU TPU Black…
Amazon Echo Pop Outlet Stand. It's been a few months and still 0 STLs out there for this item so I did my best to get us something. The charging brick and cable route into the back of the stand and then the stand itself plugs directly…
Modeled in OnShape. Printed on Elegoo Neptune 4 Pro. Dimensions: Inside Base: 114mm x 49mm Overall Height: 92mm
Amazon Echo Dot 3 Halter Ständer / Amazon Echo Dot 3 Holder Stand Halterung für einen Echo Dot 3 direkt in der Schucko Steckdose Holder for an Echo Dot 3 directly in the Schucko socket More Ideas, see www.jogiarea.de Print Settings…
Simple support for Amazon echo dot 4 and echo dot 5
Amazon echo dot holder (old version) Category: Gadgets
This model was designed for my specific use case where we use a Fire TV stick and Amazon Echo Pops as a 2.0 Surround sound for our projector. We don't have a TV Unit in front of our bed, so to elevate these speakers to head height in bed,…
Mount the echo with the cable exiting the top and looped back down through the clip. Uses 3 M3 screws, no supports. The base can be printed with 20% infill but i would suggest an infill of at least 50% on the echo mount as the arms must…
This is an under-cabinet mount for the Alexa Echo Show 5. It is designed with 4 10mm magnet slots (who doesnt like magnets). Printed on its side will not require supports CAD file available at https://grabcad.com/w3dmaker-1/models…
Wanted to build an embedded wall panel for controlling Home Assistant in the house, so created a 3d printed design to perfectly house the tablet. It has small holes for 4mm magnets to allow the cover to be easily removed, so just need to…
Please comment, rate, and post a make! All product links are affiliate links. This is a remix of the best Fire HD tablet mount for the new Fire HD 8 . Changes: Fully constrained and named sketches (can be resized without other parts…
Have your kids accidently lost the buttons for your kindle Fire HD 10 case? These replacements will do the job of replacing them. I printed mine on a mini using the 0.05mm ultra detail setting in prusa slicer and with a brim. Made in PLA.
Bridge holes and neck holes had to be moved for Leo Jaymz kit from Amazon. This is still a work in progress. 4-8-2023. The middle section is finished and printed. The bridge fits as does the neck. I need to move holes in the Control piece…
Description (Printables) Unleash the might of the Amazon warrior with the Amazon Sentinel – Paintable Miniature . This model features a powerful female fighter, armed with a shield and sword, ready for battle. Her strong stance and…
This simple desing holds the Amazon Echo Show 15 (15,6"). This desig allows adjustability of the angle of vision. The holder can be attached to the tablet using M4 x 24mm bolts. Printed the base and the holder individually Used brims Used…
If you like my design you can support me on BuyMeACoffee - https://www.buymeacoffee.com/kaushikbm -------- Amazon echo 4th generation wall fixture. Recommended print settings 0.2 layer height 20% infill Print up side down Painted supports…
Updated 6/9/25 I've updated the lock so now it has a tab on the bottom to make “unlocking” the hook much easier. While looking around for more economical hooks to use with my newly purchased Proslat, I saw quite a few on both Amazon and…
Couldn't find a stand for my echo dot, so I made my own.
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Black Filament material:PLA Notes: 0,24 mm layer 0.4mm nozzle 2 perimeter 10% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C…
Easily printable, recomended use of brim, and some suppport for the lower part of the back of the Head.
A simple to print and use mount designed to suspend the popular 4-liter Amazon Cereal/Filament/Drybox container beneath any shelf. Great to help optimize space utilization and reduce clutter for filament that needs to be kept dry! Link…
For tabletop gaming, a barbarian or fighter for your party. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d
Added chamfer to add strength to mount Added round edges Thanks, Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2 Infill: 10 Filament: Eryone PLA Rainbow Silk Notes: 5 Walls 4 Top 5…
I found no shelf for the Echo Show 5, so i decided to make one. I made a shelf for a corner first, and now added a straight up version for the wall, just because i can. ;-) Thats why you see both in the picture! If you want the shelf for…
Unleash the might of the Lionheart Amazon – Paintable Miniature . This detailed model features a powerful warrior woman, armed with a curved sword and a shield embossed with a roaring lion. Her detailed armor, flowing cloak, and strong…
Filament Clip for Amazon Basic Filament 1.75 Print in PETG.
Front bin cover/plate to make use of the entire bin commonly used in the reloading hobby. This will fit both Dillon and Amazon brand plastic bins. This particular one has been tested on a Amazon Purchased 5.5in wide bin which should be…
Allows one handed grip on your Kindle. So far for Amazon Kindle Paperwhite 4 and 5. Others will follow over time.
A wall mount designed to fit an Amazon Fire 7 tablet. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0,2 Infill: 30 Category: Tablet
Wall mounted holder for 4th gen Amazon Echo Dot that screws onto UK standard plug socket using the existing screws. Can also be stuck on with double sided tape. Obviously be careful if unscrewing a live plug socket! Also included a STEP &…
Wall mount for the Amazon Fire HD 10 (11th generation / 2021 model) based on https://www.thingiverse.com/thing:4734399 , with the following modifications: The side walls have been made thicker and a cavity has been added on the right-hand…
** Brand New Update! * FireTV w/Tile Remote Cover - Alexa Voice Remote version 6 or V6. I have updated the fit and finish completely and now it fits perfectly printed in PETG and PLA. This is a battery door replacement so you need to…
I was mad that amazons 3D Printer Filmanet didnt fit properly on my Bambu Lab A1 mini Holder. So I designed this. Perfectly printable with default parameters of Bambu Lab Slicer & Printer
---- Update for just “black_core” remix 4/14/2023 I updated the remix of the “black_core” to include the holes for the original “ pickguard " designed by Mikolas Zuza's . Very Important : For compatibility with “ The Prusacaster - a 3D…
A Re-mix of T-Shears Alexa Spot Stand Octopus https://www.thingiverse.com/thing:4222424 to hold a version 3 Amazon Echo Dot Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 200 Infill: 20 Filament: Hatchbox PLA…
Amazon Warrior – Amazing model! The dynamic pose, combined with the shield and sword details, perfectly captures the spirit of a true warrior. The fine craftsmanship on the armor and cape is impressive. An excellent miniature for both…
This is my design for a tablet stand for the 2021 model Kindle Fire HD 10. May also fit the HD 10 plus, but haven't tested, as I don't have that model. Tablet sits at a 70 degree angle. Stand is designed for printing in two parts, and…
Small wall mount for an Amazon Fire TV Cube 3rd generation. Designed to mount to a wall with cables routed into the wall through an opening in the back of the shelf. 0.2 layer hight 0.44 wall thickness 25% infill (probably a bit overkill)
Constructed using https://www.printables.com/model/916851-denali-screwdriver-holder-hsw model of the screw driver and the footprint of the bitholders and extension. Used gridfinity refined for the base. Changelog: v1 → v2: Added tolerance…
Support for Amazon Echo Dot V3. Adjustable tilt, requires M4 X 20 CHC screw. Easy PLA printing.
Please comment, rate, and post a make! Please read these details before printing! All product links are affiliate links. This is a wall mount for the new Amazon Fire Max 11 Tablet . The tablet has copious amounts of magnets built in for…
Remix of Amazon Echo Dot 3rd Gen Basic Wall Holder for the Honeycomb Storage Wall. If you made one: Share a photo!
Print each according to the name If name has x2, print 2. I don't sleeve cards so this will most likely not fit sleeved cards. EDIT: I changed the Frame x2.stl file to the correct one now.
I needed a mounting option for the new Echo Show 5, and since i found nothing, i just made one myself. Initial design until V1 was 30mins. Redesign with new ideas resulting in V2 and V3 was another 30mins for both. V1 - initial design,…
This is my take on the spool storage drawers. The drawers are from “Customizable Spool drawer - storage box” by Remivans on Thingiverse. I added the scad files with the dimensions I used. https://www.thingiverse.com/thing:3110569/ NO…
Hi, pumping out the air of these vacuum storage bags with the manual air pump is no fun. So I made this adapter by combining both listed models. Works great. It now takes only a few seconds to empty out a medium/big bag. my print…
Tabletop LG & Amazon Fire TV Stick remotes holder
