340 models
I created these parts to mount an Anderson Power style (SB50) 50 amp connector on the side of a battery box build. It is comprised of two components, the base plate and the top cover to house the SB50 plug. The components feature a small…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Model with supports for the chin, gradually smaller layers for the head and seam at the back. Thanks to the “Scan the world” project for the scan.
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant
Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for PETGSource material: PET
Parametric model to make mounting plates for X x Y grids of Anderson plugs. Need M3 screws long enough to fit through the whole length.
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Based on the downloaded .obj file, heavily processed in OpenSCAD and MeshLab. The cat's chin needs support, though PrusaSlicer didn't warn me. I uploaded a gcode with the support include, and 3mf with the support enforcer painted on, but…
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for PETGSource material: PET
Wait a minute.. is this just a mirrored version of the ingenious Cascade card wallet with money clip by Hugo ?! Yes. Yes it is. All kudos remain with him :)
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
This small castle is designed to improve the visibility of the castle token in Pirates of Maracaibo: Commanders expansion. With compact dimensions of 20 × 20 × 13 mm , it prints quickly and uses minimal material (around 2 grams), making…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Category: 3D Printing
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
A flush mounting bracket for a recessed 50A Anderson connector for mounting into trims and panels.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Jet-Vac (light) Skylanders
Print approx. €15.66–€19.14 excl. taxPreliminary estimate for one variant
This model was designed to hone my 3D model design skills + it comes in handy to protect my solar extension cable ends when not in use.
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure for an LM2596 buck converter. To remove cable strain completely the anderson connectors lock into the case, it produces a cleaner look and works very well. This works with 15/30/45A anderson connectors like the ones in this kit…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Anderson SB50 T-Handle for battery cables but w/o team numbers
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for one variant
Skylanders : Spell Punk
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
Hello, KFC's Colonel Sanders figure. Thanks for your download, enjoy the print!
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for one variant
I needed a way to mount an Anderson Plug to my Pioneer Rhino Rack. I used a water proof Anderson Plug case from Trailer Vision and designed an adapter that can attach to the roof rack as well as securely attach the Trailer Vision case.…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Human calcaneus with fracture - Sanders 2C classification The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €9.77–€11.94 excl. taxPreliminary estimate for one variant
Gerry Anderson was the creator of many TV series including Supercar, Stingray and of course Thunderbirds. Also U.F.O., Space 1999 and The Protectors. Gerry Anderson Day is on 14th April, so I've made three bookmarks to mark his Birthday.…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Human calcaneus with fracture - Sanders 3AB classification The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
The fusion360 file are given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. I also joined a decimated version of the base model in the files, it contains…
The current logo of the former Washington Redskins / Football Team and now the Washington Commanders
This panel mount is minimal and strong, with accurate dimensions taken from genuine Anderson SB50 connectors, so this is verified to fit. Some other models online do not account for the ribs on the side of the connector, so the connector…
This is a specialty of mine! They print with no supports and minimal materials! Enjoy! I print in TPU and PETG! The large size is not just scaled up, it has the same wall and bottom thickness as the smaller model.
These printable brackets allow you to panel mount Anderson Powerpole connectors in various configurations - from a simple 2x1 configuration (red/black power), to an 8x2 block (for what purpose, I have no idea, but if you need it, here it…
Printed in PLA+ with standard settings.
This is just a reupload to make it easier to find this awesome model.
Back in the day, I wanted to mount two Anderson Powerpoles into a sea-bird-like case from Xiegu. I didn't want to spend $27usd on one of these when a few minutes of designing would lead to a $0.75usd 3D print. Drill a hole just slightly…
This sculpture is known as the Gayer-Anderson Cat, named after Major Robert Grenville Gayer-Anderson who, together with Mary Stout Shaw, donated it to The British Museum, London. The statue is a representation of the cat-goddess Bastet.…
These files are Dust Covers / Caps for standard 50A Red / Grey Anderson Plugs. I've just printed one and it fits both the grey and red plugs pretty snug. Print settings are below, 0.3mm resolution worked well with ABS plastic. Did not…
50A Anderson plug flat mount cover needed on for camping
A simple flush mount box for an Anderson plug. I print using PC carbon fiber to withstand the heat in the back of the 4WD.
Simple dust cover for a combination of Anderson SB50 (50Amp) and 7 pin flat (Type 3) trailer plug (Australia/New Zealand). TWO models included - for 1x Anderson plugs and the cover for just the 7pin connector. For 12 pin plug version, see…
A small but full-featured panel mount for Anderson Powerpole (15, 30 and 40a version). Come with a cutout template so you can use it to mark where to cut and drill on your panel. There's a hole in the middle for securing Powerpole…
2 Sizes to choose from. Print in PetG for best results. Kitchen, storage, rinsing, anything! Can also be used as a bowl.
A screw mountable Anderson Plug Weather Cover for caravans and outdoor applications. Available for 1, 2, or 3 Anderson Plugs to be mounted with 4 screws in the mounting holes. Can also be siliconed along the interacting face for a better…
The good ole sanderson sisters! or should we say evil old sanderson sisters!? you decide! The blonde is good lookin though!.. I will say that.. hahaha. This is basically a shelf sitter style print. it can sit on the ledge of a shelf or…
3d printed Anderson SB50 Handle for use in my robotics team, Team 3161 It is recommended that in order for this to be more effective, the counterpart connector end(one without this handle) be secured on a hard surface. Print instructions…
This is a remix of the stellar model by fixumdude inspired by the X-34 Landerspeeder Luke pilots in Episode IV. Added a few cutouts on the top panel of the speeder to allow for easier coloring. Printed and sliced on Bambuslicer using a…
A Anderson plug holder for SB175 (175A Grey Version) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3DPrintz PETG Black Category: Automotive
Sexy Flanders Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
My take on a Anderson Powerpole distributor. The supplied stl files give you some options, but you can use the supplied OpenSCAD file if you want to increase the number of plugs. Part list: automotive fuses fuse clamps ("cable shoes")…
Took measurements of a 50A connector and basically remade it with divets instead of pins and a small ramp on the inside to make disconnection a bit easier on the plastic. It fits quite tight in there, about as tight as another connector…
01/29/2023 - added 4 connector version - added pics showing flexible wire use and battery connector (nickel plated steel) buss bars. The model has two parts, the block & the cover. The block has slots for ¼" female quick disconnects (used…
Overlays for the Mission Cards from Brandon Sanderson's Mistborn Deckbuilding game. It is very easy for the markers to get knocked around or off the cards. This overlay makes distinct slots for the markers to sit in, making it more…
This is a shroud for the 15/30/45 amp series of Anderson Powerpole connectors. There are two files: One with a 0.24" cable opening, and one with a 0.16" cable opening. Both are included so you can drill out the size cable you need. I'd…
Simple dust cover for a combination of Anderson SB50 (50Amp) and 12 pin flat (Type 3) trailer plug (Australia/New Zealand). THREE models included - for 1x and 2x anderson plugs and the cover for just the 12pin connector. For 7 pin plug…
A simple grip to make Anderson connectors easier to plug and unplug, as well as having something to strap the cable to. Prints on the “outsides”, no supports needed. PETG probably a good idea Screw the two sides together using countersunk…
I saw the XT60 covers on a YouTube video by Dennis Baldwin and wanted something for the Anderson Power pole connectors that I use. I searched around and couldn't find anything, so I made one from scratch. I made 2 versions, 1 that is…
This is a dual side-by-side style Anderson Power style (SB50) 50 amp connector mount. It is comprised of two components, the base plate and the top cover to house the SB50 plugs. The components feature a small channel around each of the…
Protective cap for anderson sb175 (stile) connectors; thight tolerances,so it may take a few prints to get right. The flat version does not lock positively unlike the normal version, but is therefore easier to remove from the plug and has…
Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal…
Best printed face down in PETG or ABS Contains: 1x1, 1x2, 1x3 2x1 3x1
A remix of a 50A Anderson Plug cap that requires no support and has a hole for a tether to allow it to be attached to the Anderson plug when not in use. I did not need glue to get the pins to stay in the cap body, but depending on the…
This is an Anderson Powerpole connector designed to take two sets of connectors. It can be used for passing through a bulkhead up to 20mm thick. Includes Nut. This is the final competed model Fixes from previous models: Thread depth…
Anderson Powerpole Panel Mount – Rear Insertion with Backer / Template This custom-designed panel mount provides a secure and professional installation solution for standard Anderson Powerpole connectors. Designed for front panel mount…
This is a display plaque for all of your 2022 Brandon Sanderson Kickstarter pins. I personally don't have any bags or anything to put the pins on so this was a great way to display them instead of stuffing them in a drawer never to be…
Re-mixed dust cover for the Gray Anderson connector. I printed mine in TPU for toughness, ease of operation, and so that it's easier on the plug itself. I also printed a test print in PETG and it fit without issue as well, but it's pretty…
Es hat mich immer genervt, wenn die Stöcke beim transportieren herumliegen und beim abstellen umfallen. Halter zum befestigen der zwei Stöcke mit einem Haken zum Aufhängen. Kann auch für Ski/ Wanderstöcke verwendet werden. Print…
Have you ever get sliced by that sharp edge of aluminum plate while you are pulling the battery out? Or just want a quick and easy way to remove the battery in a hurry. We got you covered with our 1918 NC GEAR Anderson SB50 connector…
Skylanders trap team key holder to put together yourself Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: 123 3D Jupiter Pla Green Notes: Skylanders trap team key holder…
Skylanders trap team 8 key holder Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: 123-3d juniper PLA Wit Category: Games
Fast, easy print, no supports. Includes mounting holes/eyelets. For those POTA activations where everything is in a backpack and you risk an accidental short - like leftover copper strands, your favourite steel wool sponge and powdered…
This little adapter let you to hold down a Anderson PowerPole connector (PP30) into the frame of a Yaesu FT-891 transceiver. This adaptor requires an insert of M3 x D4.6mm x L5.0mm insert with corresponding M3 bolt. You also need to…
7/27/2023 update Tweaked spacing for layout Added new version using pins for PowerPole pair retension rather than the “click-in” method. Can make assembly easier. 7/29/2023 update Added a “shell pusher” to assist in assembly of the…
This model is compatible with the lego system.
Here is the awesome looking Washington Commanders Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Here is my design for a chassis mount Anderson power pole socket. I've included a large number of versions of files for different configurations on conductors and sockets. The connectors will slide in from the front, but are prevented…
This lid/cover and gasket is designed to accompany the PowerPole Mount by Electroalex26 (https://www.thingiverse.com/thing:3726066). It is meant to offer mild dust and weather protection, but it is not likely to provide a high degree of…
This design contains components for construction of a modular, low profile, Anderson PowerPole distribution box. Single and double sided versions are included. Individual circuits can be fused or not fused, as desired. Arrangement of…
There are four sizes. Small, for TrueSDX power cable, Small twin, for Yaesu FT-817 or similar size cord, 12 gauge and 14 gauge twin power cords. They are in half shells, so print two of the size you need. They take M4x12mm screws.…
Molle Leki Wanderstockhalterung speziell für den Tasmanian Tiger TT Essential Pack MKII Molle-System 9L. Damit die Halterung Sinn macht braucht man folgendes: -Einen Tasmanian Tiger TT Essential Pack MKII Molle-System 9L -Leki…
This is essentially the same as ELUMSPE 's model... I modified the outermost face of this to fit the FT-710 specifically. I have NOT tested this on a FT-991a, or the FT-DX10. But, it should work IN THEORY. There is a small chance this…
Based on the downloaded .obj file, heavily processed in MeshLab. Support is required only for the chin. I suggest printing with organic/tree supports, on build plate only. OrcaSlicer has a setting “Support critical regions only” that…
Anderson Power Pole adapter for the Yaesu 817, 817ND, 818 and 818ND.
To keep your cables with Anderson plug connectors organized, you can print these labels and attach with M3x20 bolts and nuts. I've added a blank label as well so you can add any text you like in Prusa Slicer if you want a label that is…
Print & acrylic draw!
I used a cheap PD PCB from Amazon (maybe cheaper from AliExpress ): 6 Stück QC/PD/AFC Netzteil-Trigger-Modul: Schnellladeauslöser, USB-C, 5 V, 9 V, 12 V, 15 V, 20 V, DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook…
A simple and sturdy deck box is for Commander/EDH Magic the Gathering decks. Sized for 100 double sleeved cards. There is some extra room for a few extra cards/tokens. The front uses a hard plastic toploader as the window and protection…
This model is intended to be printed in two parts, the front and back are held together with M2.5 screws. The Anderson Powerpoles can be attached with additional screws or scrap filament for a cheap solution. The face plate is intended to…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
HAPPY BIRTHDAY Pamela Anderson 1 July 1967
FRC team 2052 KnightKrawler uses Anderson SB50 connectors on its batteries and chargers. While the 6 gauge wire we use on the batteries is pretty robust without any strain relief, the higher gauge (smaller) wire on the charging side is…
Dust/ protector cap for a SB-120 Anderson plug. Prints vertically with no supports. I did it in ABS since my use case was to leave this plugged into my car's DC line. Then when there was a power outage connect it to a 1500W inverter to…
To replace the original plug that often melts but also for more readily available anderson connectors (50A) Category: Tools
To avoid the mess and one-time use of tape or heat-shrink, I designed a hybrid enclosure that merges Wago quick-connect style with Anderson housing. The result is a reusable, modular “Wago-to-Anderson” case that’s cleaner, stronger, and…
This was designed for the use of 2x M5 T-Nuts to mount to the Armoloq TPA. For the Amroloq's intended application I would recommend printing in ASA or ABS.
Reworked the 3d model from Scan the wrold: https://www.myminifactory.com/object/3d-print-gayer-anderson-cat-at-the-british-museum-london-4010 Added cup to be used as an egg cup or Jewellery holder. Please note for egg cup you will need to…
Stands for the three Funko Sanderson Sisters figures, #433, 434, and 435. Each one has their own custom base with one of their quotes inscribed on it. The strut and fork for Winifred and Mary are identical - print two of each. Sarah's…
Alignment jig for attaching sandpaper to 5" (possibly other sizes of Orbital Sanders) to properly line up the dust collect holes for optimal dust evacuation. Design in TinkerCAD. Printed at 0.2mm layer height with 20% gyroid infill.…
I wanted a simple cover to put on my batteries when charged. I don't bother with an "uncharged" cap - if the cap is on I know the battery is full. Otherwise it isn't. Fits 15/20/45 A Anderson Powerpole 2 connectors side-by-side Designed…
The models are designed such that the bottom surface represents sea level. Each model has the name of the mountain engraved on the bottom. I created the models with QGIS and HGT2STL, then did some finishing work in Blender.
Anderson Power Pole PP75 two pole connector holder, use an M3 x 20 to lock the PP75s in place
My complete set of Anderson SB50 covers with dust caps. I was selling these but the competition and margins aren't worth the effort. 3D printers have now reached “Commodity” grade so the mystery has gone and almost anyone can turn out…
Made for kids school projects Category: Learning
Simple bases that clip on and expand the 'size' of your miniature. Used for standard inch scale bases / 28mm scale / heroic scale miniatures. (Such as those found in the pre-painted sets that are sold.) If you have a 'flying' whatever,…
Pamela Anderson https://www.hi3d.ai/share/hyperrealistic-baywatch-lifeguard-3d-character-model--1687c442c9bc42b095e68cbff6ea91e5?inviteC
Hockey pucks of New York Islanders alternate logo Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
This clip was designed to prevent two connected pairs of Anderson connectors from becoming uncoupled. Quick to print, easy to attach and detach.
