946 models
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
Print approx. €5.47–€6.68 excl. taxPreliminary estimate for one variant
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Triangular chalks give a good line but are a bit fragile and uncomfortable to hold. This holder makes it better. Just print the two halves and push them together around the chalk. choose what ever filament that you get good layer adhesion…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
The triangular key is used for locking and unlocking locking posts. Best Results with PETG, Support and 0,3 mm Layer Height. Due to the shear forces I have printed this key with 100% fill
Print approx. €6.66–€8.14 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: You certainly want the new krab-stand* version which has only positives and none of the negatives mentioned below. Print them all at once, perfectly! Shape is slightly improved for printing in the standing position. Bowls are…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Female triangular key for gas box. The typical triangular key for elevators is not valid the gas box, does not fit. It is difficult to find this tool on the market. Tips for 3D-printing: Put the piece upright, like a rocket. Enforce…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Whiskas 100g cat food in rectangular container - they used to give you clear lids, no more! Here is a printable one.
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Meeting my local store I was shocked by how expensive those parts are (reg. EUROPLAST System 110x55) and made some parts myself. Model is for 0.8mm Nozz and NO Supports (whilst therefore, my design is a little different compared to the…
Print approx. €5.72–€6.99 excl. taxPreliminary estimate for PETGSource material: PET
This is a large triangular lampshade designed for use with either a floor or hanging lamp. I am using a 7.5W Philips Hue E27 bulb with a matching diffuser inside the lampshade. The shade is made up of three identical sections, each with…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
This is a rectangular breadbasket normal and voroni style. If you ad a stitched lining you can prevent the crumbs falling throug the holes. Size: 26 cm x 10 cm x 8 cm Adjust it to your needs.
Print approx. €14.53–€17.75 excl. taxPreliminary estimate for PETGSource material: PET
Meeting my local store I was shocked by how expensive those parts are (reg. EUROPLAST System 110x55) and made some parts myself. Model is for 0.8mm Nozz and NO Supports (whilst therefore, my design is a little different compared to the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
for English, see below Zugegebenermaßen ist dies ein sehr einfaches Modell. Wesentlich ist jedoch die Idee dahinter, das Netzteil (außerhalb des LACK Gehäuses) über 2 PC MOLEX Stecker Leitungen mit dem MK3/MK4 zu verbinden. Die beiden…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement lid for a rectangular 500g coffee container tin that's commonly available at least in Finland. I'm not sure how standardized these containers are or if some of them may have small differences in dimensions or the…
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET
Alentejo architecture has a strong Moorish influence. The chimneys are always white-washed, sometimes with a bit of exposed brick. Here is a round chimney: https://www.printables.com/model/612339-alentejo-portugal-chimney-pencil-holder…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Keep your filament dry and optimize your 3D printing results. This adapter holds a small rectangular digital hygrometer and enables you to monitor humidity levels at a glance without having to open the box. A simple mounting solution with…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
Nice rectangular key tray with curved lines and rounded corners. The ideal storage place for car keys, coins and other small items. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D…
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded. UPDATE 16/02/2024: added folder with other filler size, in case you are…
Designer Dovydas Cesna Needed a sturdy little trash can, relatively simple model with a nice pattern on the walls to make it stiffer. total size: 200x200x225mm Settings in PrusaSlicer with 0.4mm nozzle: Vase mode 0.7mm wall thickness…
vase with rectangular pattern
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
Air Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda) Dimensional measures: Hex 100mm Ø100mm 100x100mm 100x200mm 100x200mm Vertical (NEW) 125x150mm 150x150mm…
Recommend printing in ASA for heat and UV protection. Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both…
Triangular Wall Art - Mountains Designed for room decoration. Designed for easy print with no supports and with light body. Paramenters: X: 220 mm Y: 200 mm Z: 2 mm (minimum thickness) - can be printed in every type of filaments -…
Universal Triangular Access Key for Utility Meters and Control Cabinets. A durable and reliable tool designed to easily open technical enclosures, gas meters, electricity panels, and water valves. ⚠ CRITICAL PRINT NOTE: Do NOT print this…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
Triangular Mountain Wall Art – Minimalist Nature Wall Decor Hexagonal Wall Art is avaliable on my profile The design features four triangular panels with mountain and forest landscapes, creating a modern and stylish wall decoration. These…
This model is compatible with the lego system.
This is a remix of @chadfawcett_690675 original design. Updated the dimensions for a snug fit. Increased the height to 5mm taller to clear the cable from rubbing on the PCB as well as the acrylic sheet from rubbing on the PCB connector.…
We made a custom g-code generator for printing rectangular wave springs in midair because you can't really buy them anywhere. You can adjust the width/length, corner radius, number of waves, and many more parameters to suit your needs.…
Stylus that is similar to the one loaded onto the flashforge 5M / AD5M from the factory. Has two spots for magnets. Same magnets that are in the enclosure kit. Printed with default settings, but add brim, and no supports.
A five-sided shape made of equilateral triangles and squares.
After printing Puppy 13 head by Tori, I decided to model some paws to go along with it, in the same algular style. Should print with the same settings as the normal Dummy. Enjoy!
An angular speaker enclosure for 3 in speaker drivers. Printed in two pieces, top/front, and bottom/back. Then sealed together with epoxy after the speaker and binding posts are mounted internally. The internal of the enclosure features…
This is the upgraded 3D-printed enclsoure featuring a triangular prism-like shape rear support with margin for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It…
This is the first 3D-printed enclsoure featuring a triangular prism-like shape rear support for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…
A simple rectangular container with lid. Is Customizable with Customizer In OpenSCAD Looks like a tolerance variable of 0.2 is a tight fit, and 0.3 is a loose fit.
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
Triangular Key for electricity cabinet, Material: PETG 0.2 layer height, 15% infill, Brim: Yes, Suport: None
Print settings: Infill: 50% grid Filament: PLA Supports: None A 20-peg rectangular loom (40 knits per row) loom perfect for teaching yourself or a friend loom knitting. This loom makes a knit tight enough to pass as being done with…
This model is compatible with the lego system.
This is a triangular corner clamp utilizing l bolts. The clamp has a slight lip on its outer edge to let it sit on the work material. I made the L bolts out 4-½" x ¼"-20 machine bolts and chased the threads down further with a die. You…
A remix of The3Designer 's 120mm Angular Louvre Fan Grill to fit the 140mm fans. Scaled to 140mm size and added appropriate screw hole locations. If you like the model, support the original creator using his affiliate link.
Since I made the rectangular divided bin that has 4 cavities that fits the Milwaukee Packout Organizer, I was asked to make a rectangular bin that has only three cavities. Here it is. If you like these models, check out some of my other…
A modern, minimalist catchall tray, ideal for anything that would otherwise be lying around. It's easy to print and fits seamlessly into your home decor. The standard dimensions are 200 mm x 130 mm x 30 mm (scalable). Printed with the…
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. 14.5cm X 10cm X 6cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant…
Introduction: This is a rectangular style glasses frame designed for fursuit heads with lots of customizable options! Upadte (2024/9/17): Added a new version that has a curved nose bridge instead of a flat nose bridge. How to customize…
Parameters such as diameters and dimensions should be selected empirically, depending on the printer you have and the filament used, and you should also take into account the spare dimensions for grinding and polishing, as well as…
125mm Angle grinder dust cover for generic Angular Grinder
I liked the OP's idea of using infill for the sides of the boxes. Dramatically reduces the print time, and still provides great functionality. Since I run a small print farm and needed to make parts for 8 AMS units, the reduced print time…
This is a Laptop stand for 11 to 14 inch devices. Beyond that it might get a little wobbly. The model was inspired by fornellas triangular Laptop stand (https://www.thingiverse.com/thing:2164083) but I have added a “lip” to keep larger…
This model is compatible with the lego system.
I successfully printed this model without support using generic PLA with an i3 Mega S as well as a BambuLab A1 Mini. Please check out my blog post at https://matthias.dittgen.name/blog/woven-basket and see the full OpenSCAD source code at…
repost / remix of the original, which was relatively small the version I've printed is 20cm at its widest, I've also made a 30cm version These are more suitable for actually ceiling mounting on a pendant light in a decent size room when…
This project is a ‘fork’ of https://www.printables.com/model/57885-self-watering-rectangular-planter-with-optional-la and my motivation is to have a syphon where the water and earth do not touch directly. In my case it is enough if the…
This model is compatible with the lego system.
Meet Trook - the triangular book holder. This one is for all the bookworms out there.
For perfect first break. Due to the angle, the balls can be perfectly placed against each other. Print the Part 3 times and glue it together. designed for a ball diameter of 57.2mm. If you need a different ball diameter you can scale the…
Triangular key - easy and fast to print. 8mm size should fit most locks, for example litter bins, doors etc. Print solid, triangle facing downside. no Supports , brim is helpful.
Rc 1:10 scale triangular roof tent. Střešní trojúhelníkoví stan. Stan se otevírá na kloubu s použitím M3 šroubu, v zavřeném stavu ho drží magnet. Při dotahování pantu nechte šroub volný a nedotahujte ho jinak praskne pant.. Rozměry:…
This is yet another cover of the Airtag designed in a triangular way. It is NOT interlocking, but can only be mounted using the small parts: N°3 M3X10mm Countersunk screws N°3 M3 nuts Print the parts with the visible sides resting on the…
This model is compatible with the lego system.
triangular desk organizer - made in Fusion 360
Instructions 1: Load the file in Fusion 360 and double click here in the timeline to edit the pattern that defines your shape. 2: Check all the slots you want to include in your shape. Your shape must include the slot at the origin point…
If printing issues occur, reduce print speed to 50% . Use Arachne mode and random seam positioning for the best results. 🔺🔶 Fidget fun in geometric form! This Triangular Hexagon Fidget Toy combines multiple triangular mini-fidgets into…
some requested modifications. If you print it out, please share the results. Thanks! Round (d=6.5cm , h=1.27cm) Round (d=7.5cm , h=1.27cm) Base 20cm x 15cm x 1.9cm
This tray neatly stores and organizes 80mm triangluar sanding pads used by typical oscillating tools. Can be printed horizontally or vertically with decent bridging.
This model is compatible with the lego system.
The A-mazing Irregular Tetrahedra "A", the geometric sensation that's taking the alphabet to new dimensions! Print-tested on a Prusa Mini: 0.4mm nozzle, 0.15 layer height.
Train your fingers at home or warm them up before crushing that rock with this beautiful hangboard! The holds are 35mm, 20mm, and 15mm deep. To hang the board, use a carabiner or some rope. You'll need to print: - 2x…
Here is an example of a rectangular box generated on the iteration3d platform: https://www.iteration3d.fr/en/templates/template-view.php?templateid=28 Generate a new one tailored to your needs in just a few clicks. Set the length, width,…
modern design rectangular tray print it in black: it will looks great print it bigger
Schlüssel für viele Feuerwehreinfahrten. Bei mir passt er an der utomatischen Schranke für den Parkplatz.
A rectangular trim kit that can be installed under the Nest Thermostat to cover up any imperfections on the wall.
Store your thread spools (up to diameter 21mm / hight 60mm) inside of this box. I suggest to print boxes in different colors to store threads of the matching color range. The box is held shut with 2 or 4 magnets of 6mm diameter and 2mm…
A diffuser to smooth your Sony a6000 pop-up flash! Measured to fit your Sony camera flash, * might* fit in similar models Conscientious Topology design Precisely measured with sufficient clearance for a snug fit Alternative version of the…
NEM 105 compliant cross section You can find the design on Onshape - and customize it to your needs (e.g. length, number of slots, slant angle)
Bonsai pot 02 rectangular (shohin), 185x135x70 mm, glue feet on the bottom or print the model in one piece.
Triangular hanging flower pots - no nails or wall damage required. Small metal hooks are needed to be screwed into the bottom of each planter for assembly. I used the ones in the photo. Large hanging door hooks fit a typical door with…
Print settings: Infill: 50% grid Filament: PLA Supports: None A 12-peg rectangular loom (24 knits per row) loom perfect for teaching yourself or a friend loom knitting. This loom makes a passably tight knit on medium weight while also…
This model is compatible with the lego system.
This is a triangular twist puzzle. This is a relatively easy puzzle to solve. The objective of the puzzle is to assemble the three pieces into a triangle. The puzzle should be able to be assembled with little to no force exerted onto it,…
Have mounts that fit perfectly any and all of your rectangular remote controllers with this customizable project. The included STL is just an example with the parameters shown in the screenshot. My initial goal was to mount remotes, but…
There's only so many things that can be written about a shower head, but here it goes. :) I wanted something similar to the one we have already, which is breaking down. So made it in a simplistic (IMHO) shape. Made a few attempts, the…
Re-mix of BlockyPlanter3 to add a self watering tower and floating ball to check water levels
Llaves triangulares de 9,10,11,12 Llave contador agua
Triangular stand to facilitate the painting of wooden or iron objects. Individual stands can be connected to each other to create a larger and stronger structure. In the stand, it is also possible to paint logs up to a diameter of 20 mm,…
This lens hood is designed to twist lock onto the Canon EF 50mm F/1.8 Lens. Printed in PETG at 20% infil, NO Supports. From another user: “Scaling it to X:94.2 Y:94.2 Z:96. It will be a perfect fit for RF50mm.”
2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm Spec: Hole diameter 4.2mm (M3-M4 Socket Head) Slot 8.5x17.2mm Suitable for: 20x20mm extruded aluminium…
I wanted a plain rectangular bin without any divider slots and without the need for printing supports. The large lip is required so the bins fit tight to each-other and so the lid will close properly, fitting inside the bin. I added a 5mm…
J'avais besoin d'une équerre d'angle pour des étagères triangulaires, qui mesurent 25x25cm. J'en ai donc dessiné ! Profitez-en ! 2e version. ******** I needed a corner square for triangular shelves. It is designed for a width of 25x25cm.…
I exported a "strait" option that allows mounting the ventilation duct in line with the fan if you need that. The “side” version is the one I used to extract air from a cabinet as shown on the pictures. The cabinet is used a cat litter…
Air ventilation grid grille vertical rectangular, bracket (recommended with supports) and inner grid (4 types: bars and holes 3mm or 4mm, only holes 3mm or 4mm). Notes: Depending on the finish of the 3D print, one bracket or another is…
Simple triangular picture frame. Because rectangular frames are boring and too convenient!
Foldable Rectangular Prism that is printed flat and then folded into shape. A continuation of a series of foldable objects designed to allow students to explore the properties of geometric shapes. The design for this thing was created in…
