Halter für Filament Rollen 1 kg - alle Marken
Ständer und Halter für Filament bis 1 kg alle Hersteller
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
- Downloads
- 156
- Likes
- 12
- Rating
- 0
62 models
Ständer und Halter für Filament bis 1 kg alle Hersteller
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…
Pay attention to where the legs and arms are place. They are different. The joint's depth in the arm and the leg is different. build it carefully. Print in PETG with tree supports for best results. OVERHAUL UPDATE 11/13/25: Added Harken's…
Update: Mercedes auf Wunsch!
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I shortened the original model to 20 cm directly in PrusaSlicer. Isn't 100% perfect but close. Fits on the Prusa mini.
A funny request from one of my patrons :-) Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
The CAD can be found from https://github.com/eamars/PrintableThrowLevers/tree/main
Na, hast du auch schon genug von der lästigen Reifenmarkierung? Dann ist der RimTagger dein neuer bester Freund! Einfach am Ventil deines Autoreifens befestigen und schon weißt du immer, welcher Reifen an welche Position gehört. Durch den…
Parallax Throw Lever for a Arken EP-5 Scope. Will fit any scope with a 42mm parallax wheel. Hardware: Uses a 3mm x .5 x 5mm socket head screw. Printer: MK4S, Filament: Black Prusa.
Small, lightweight throw lever for the Arken EPL4 4-16 scope. Does not require any hardware - it is a snug friction fit. Depending on what filament you prefer and shrinkage rate, you may have to adjust scale. I printed at 100% scale with…
Schlüsselanhänger mit Nummern 1-7
Harken from die of death with extra headpieces. I cant print this out rn, but i wanna ask if anyone does print it, tell me what you reccomnd i shud change, or adjust.
Magnification Throw Lever for Arken EP-5 Scope. This fits any scope with a 47mm mag wheel. Hardware Required. 3mm x .5 x 7mm socket head screw. Printer: MK4S, Filament: Black Prusa.
Threaded to fit the Arken EPL4 4-16; may fit others, unsure if Arken uses the same thread pattern on different optics. This requires a well tuned printer. I was able to get good quality threads on my Bambu P1S w/.4mm nozzle. Printed in…
Ausgangssituation: Ich habe jede Menge Homematic Schalter in Verbindung mit dem Wippenadapter und Rahmen für das Gira System55. Nachdem die Homematic-Rollladenaktoren und -Schalter Stück für Stück kaputt gehen (das bekannte Problem mit…
Arken EPL-4 Scope Parallax Wheel. Hardware required: M3 x 5 Socket Head Screw
This is a Wall mount for Arkenstone replica "The Heart" by Dreamspheres (a replica from The Hobbit / The Lord of the Rings) http://dreamspheres.co.uk/the%20heart.html It incorporates a spot to include a Puck light I found on Amazon to…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Die Halter haben die Ø41,5 mm; Ø44 mm; Ø56 mm; Ø62 mm für verschiedene Gewürzmarken. Im Gegensatz zum Vorgängermodell leicht geneigt und mit einer…
Scale to 10% for very tight fit. 11.5% or 12% for a loose but snug fit. Bic Buddies are great companions for smokers and non smokers of all walks of life. I have a lot more Buddies to post! This is one of the coolest designs I have ever…
Der Klebehaken ist die perfekte Lösung für eine bohrfreie Montage von Bildern und leichten Gegenständen an der Wand. Er ist kompatiebel mit dem Pattex „Kleben statt Bohren“-Klebeband. Mit einer Klebefläche von 22 x 45 mm sorgt er für…
This is a replacement i designed for the worn out trim cap on top of the Harken MKII furler. It consist of two halves so that it can be fitted without the need to disassemble the furler system. A strong adhesive or epoxy is needed to join…
Man benötigt 4 - 6 Harken an der Unterseite, um das Gewischt der PS4 aufzunehmen. An der Oberseite auch weniger, da dort nur das Umkippen verhindert werden muss. Im Gehäuse der PS4 ist eine Ausbuchtung, 1 Harken knapp davor und danach…
Spielmarken für das normale Hauptspiel ohne Erweiterungen. Vorn sind die Zahlen drauf und hinten nichts. Durch Farbwechsel in der richtigen Höhe kann man die Zahlen auch in einer anderen Farbe drucken.
Arken EPL-4 Scope Magnification Wheel. Hardware required: M3 x 5 Socket Head Screw
Ikea's SOLBO owl nightlight is a really nicely made light for kids rooms. However, the usual critique is the far too bright light. Ikea used an unusual 24V LED lamp with a custom connector. So just changing the LED didn't work easily. So,…
Harken design of carbo block line guards. full and half guards for 56 and 75mm carbo blocks. Instructions link: https://harkenblockheads.com/feed/wp-content/uploads/2022/09/Carbo-Line-Guard-Instructions.pdf Line Guard Types - The half…
Kabelharken für den Kärcher WD3 Für das bessere aufrollen des Kabels beim Kärcher WD3. Der Harken wird von unten mit einer Schraube gesichert. Gedruckt mit Sunlu PLA Matte 50% Füllung.Kabelharken für den Kärcher WD3 Für das bessere…
Wertmarken für Essen & Getränkemarken Printing instructions: • Material: PLA • Nozzle: 0.4 mm • Layer Height: 0.2 mm • Infill: 15% • Supports: no • Brim/Raft: no • Wall: 2
Printed in ASA (UV beständig) Farbwechsel lt. 3MF Datei machen oder siehe Screenshot Größe kann verändert werden aber es darf nur X und Y skaliert werden nicht die Z sonst passen die Farbwechsel nicht mehr.
Der Türharken ist ideal um an Türen, Jacken oder Hantücher zu hängen
Sunlight kept waking our boys prematurely because the room darkening curtains didn't hug the wall close enough, so I designed these clips to help. This is a pretty small and practical thing, but it makes a big difference. I've attached…
This is a pair of darkening rings for the purpose of preventing light leaks within your optical train. Specifically I made this for my setup of: ASI294MC Pro → T2-Tilter → 2" ZWO EFW As ZWO does not provide any fitting darkening rings for…
Used to prevent the traveler lines from fouling each as often experienced in small boat mainsheet traveler systems. Print in UV resistant material such as PETG. Printed 0.2mm layer height, 15% infill.
Print in ridgid material and about 40% infill. Use 2x4mm coil inserts and 2xM4x35mm.
The model is ridgid if you use correct infill and material. You will need 3pcs M4x15 bolts This is for those with Panthera / Dynamic or anything else with built in >0 MOA. Its a bit tilted backwards to compensate.
The autodarkening insert on my welding helmet broke. Could not find a replacement part for a reasonable price, I don't weld THAT much. To fit a cheap autodarkening insert in my helmet i designed and printed this simple "adapter".
Stop light from entering through the suction cups holding the window cover. Loved the insulated window covers we got from https://www.bus-ok.de/T4-Isotherm-Set-innen-Thermomatten-fuer-Fahrerkabine-91-98-Top-Qualitaet for our VW T4. But…
I wanted to put a Harken 150 cam cleat on my Tethrd One Stick for saddle hunting and needed something a flat top to secure the cam cleat to. I designed and printed this using Polymaker ASA. I had to cut off the DynaLoc tab and drill holes…
I have a sailboat. The spinnaker sheets (big sail control lines) come back to the stern pulpit and through a H2600 AirBlock. This dangles and bangs. There is no obvious way to hold it in position, so I made this. It is a loose fit in the…
A holder for IKEA Karken pencil cups that is compatible with Skadis pegboards. Print at 100% infill with the top side flat on the build plate.
The Arkenstone! Made as a lighted prop for a production of the Hobbit. In the end, scaled to 600% to get to the best size. The threads take some convincing, but I was in a time crunch and 15 minutes of working the halves together with…
This is Gluepad for the Harken 3288 Compsite Eyestraps. I designed this so dont have to drill holes in my boat. The component is not designed to carry even remotely any load. It is certainly enough to attach a cord to it and hang up the…
Hab für jemanden einen Aufsteller entwerfen sollen mit einer Bier Marke Trauf
Ein Haken für Hobby wonwagen für die Vorhang leiste zumrein drehen
harken für das Ikea regal mit dem Namen IVAR
This is a replacement pawl for a Harken 75mm Cheek Ratchamatic Block. Category: Sport & Outdoors
this is a cover for the Harken Triple Block, that we use on the Melges 24 on the Vang. We glued it with a strip of 3M in place. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0,1 Infill: 50…
Das Schild habe ich auf meinem Prusa XL mit den folgenden Einstellungen gedruckt: Material PETG Perimeter 5 Schichten oben 5 Schichten Boden 5 Das Schild ist 300x214 mm groß, kann jedoch auch kleiner skaliert werden.
A bit of a bodge, but it works. Would suggest printing in something like ASA, the PLA one I printed lasted about 6 months of racing, which isn't bad considering. I've just printed a handful of them to replace as they break.
harken from game DIE OF DEAD in ROBLOX
Halten & Parken Verboten Schild mit erhobenen Text. In PLA gedruckt, natürlich nicht optimal für Outdoor und empfehle anderes Filament. Werde es noch mit Klarlack/Epoxidharz o.ä. versiegeln damit es zumindest eine Zeit lang hält draußen.…
Parken Verboten / Garage Freihalten Schild mit erhobenen Text. In PLA gedruckt, natürlich nicht optimal für Outdoor und empfehle anderes Filament. Werde es noch mit Klarlack/Epoxidharz o.ä. versiegeln damit es zumindest eine Zeit lang…
Garderobenmarken-Set und Halterungsbox
Pieces to fix a damaged Harken C car Printed in PETG 2mm layer height
This handhold is designed as a near drop-in replacement for the Harken handholds, used on boats like the Soling and Yngling. It is modeled to match the original as closely as possible, but there may be small deviations, so it is a good…
Add supports yourself, and not articulated, it's a statue.
This is a flexible holder for the pulley on a TOPCAT catamaran. It holds the pulley above the deck an prohibits by this, that the pulley hangs beside the boat and gets caught by the passing water when sailing. By this, also the reacher…
I have a sailboat. The spinnaker sheets (big sail control lines) come back to the stern pulpit and through a H2600 AirBlock. This dangles and bangs. There is no obvious way to hold it in position, so I made this. It is a loose fit in the…
Das Schild habe ich auf meinem Prusa XL mit den folgenden Einstellungen gedruckt: Material PETG Perimeter 5 Schichten oben 5 Schichten Boden 5 Das Schild ist 300x214 mm groß, kann jedoch auch kleiner skaliert werden.
Stop light from entering through the suction cups holding the window cover. Loved the insulated window covers we got from https://www.bus-ok.de/T4-Isotherm-Set-innen-Thermomatten-fuer-Fahrerkabine-91-98-Top-Qualitaet for our VW T4. But…