21,497 models
It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…
Print approx. €12.14–€14.83 excl. taxPreliminary estimate for one variant
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
You'll find all the build instructions and links for components in the article: https://blog.prusa3d.com/the-prusacaster-how-to-design-and-3d-print-an-electric-guitar_71962/ Overview of the multiple pieces: Hardware Made to work perfectly…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Thangs This model is support free BUT i recommend you use a support pillar right next to the…
Print approx. €8.95–€10.93 excl. taxPreliminary estimate for one variant
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Modern easter bunny with folded ear, great addition for this year's easter decoration! The model is 215 mm tall, and can be scaled up to your liking. The folded ear will need support material. When scaling the model down, the tip of the…
Print approx. €5.67–€6.93 excl. taxPreliminary estimate for one variant
Easter is near and I have a really cute surprise that you can find in the grass and under the bushes. Easter Cats! At launch, there are 5 cute faces that you can choose from. Maybe more are coming if they are popular! You can print a…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
This is a unique spiral Easter egg! It consists of two parts that interlock by spiraling into each other. This innovative design blends functionality with aesthetics, adding a fun and modern touch to the festive atmosphere. It's the…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
Print approx. €42.13–€51.49 excl. taxPreliminary estimate for one variant
Size: 125mm x 90mm x 77mm WEAVED version: Filaments: PLA Vanila White (body), PLA Jet Black (eyes) and Filament PM PLA+ Pastel Bubblegum Pink (nose) CROCHET/KNITTED version: Filaments: Filament PM PLA+ Pastel Bubblegum Pink (body) and PLA…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This is my detailed print of the original STL from "et-huang" on Thingiverse. I did a lot of test to achieve this (a little dirty and dusty), print. This is also my very first print published on this community.
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ Print Keep Squire is a beginner-friendly, front-loaded single-shot foam-dart blaster, designed for those eager to venture into the exciting world of 3D-printed blasters! Its my first…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
use supports my Creality Ender V3 KE print speed settings in pictures 1 mm version – ❗fast printing without supports can cause oscillation and shifting of layers, see photos added version with 2mm wall (better printing) added more…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…
Print approx. €5.70–€6.96 excl. taxPreliminary estimate for one variant
Model Drinking glas coasters with holder in Voronoi Pattern. The holder can hold up to 15 coasters. Dimensions The coaster has a diameter of 99 mm and a height of 5 mm. The storage container has a diameter of 110 mm and a height of 80 mm.…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Ausstecher für Osterhasen / Easter bunny cookie cutter
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Print approx. €22.26–€27.21 excl. taxPreliminary estimate for PETGSource material: PET
When looking for Diyable easter decoration i didn't find anything, which i liked. I could only find an image of something similar to this. As there wasnt any Instructions or files, I just made something similar and this is the result. i…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
I'm making a master collection of all symbols of the car dashboard. I will upload now 50, and I will update overtime. I hope you like it. 1st pack (50): 10/07/2024 2nd pack (50): 12/07/2024 3rd pack (50): 16/07/2024 4th pack (50):…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
Making is straightforward without any specials ;-) Printed mine in the picture with 0.40 nozzle, 0.20 layer, 3 perimeters, 5% infill of extrudr NX-2 PLA matte white on satin sheet.
Print approx. €9.68–€11.83 excl. taxPreliminary estimate for one variant
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Osteranhänger für den Osterstrauß weitere Modelle: Osterei mit Schneeglöckchen Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
This flexible starfish is an easy print that has been carefully designed to not make use of any bridging to provide for the articulated joints, and requires no supports or other special print options. Its size allows it to serve well as a…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Very useful, this key can be added to your keychain. So, no need to look for a coin anymore. Opens deposit locks without coins or tokens and can be removed immediately. Print settings: Default PETG 0.2mm, nozzle: 0.4mm
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
It's a small pick stand which turns your guitar-pick into a Telecaster body. It should fit all picks up to 2mm thickness. You can print it as it is and won't need support. It's a good idea to place the seems in line or even use the…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Drink coasters inspired by the James Webb Space Telescope primary mirror. Fits drinks up to 3.5" diameter. Available in four surface patterns: Triangles Circles* Linear Matte Gcode and 3MF files include color change and infill patterns…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
After building /u/GermanDarkness 's Remix of /u/isrussell 's model I had a ton of new ideas to implement! I rebuilt pretty much everything but still used his strum bar and face buttons in this iteration. The end product is primarily made…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
A complete Easter decoration set — knitted-texture eggs paired with a matching woven basket, both designed from scratch in Blender. The eggs feature a realistic crochet-style knit pattern across the entire surface. The basket uses a…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Spider-Man: No Way Home just came out so here's a Spider-Man coaster & keychain set for you to print! The coaster also makes a good action figure stand, and I am currently using the keychain as a Christmas ornament. :) Designed to be…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
One colorchange will do. You can print the model upside down to give the top surface a nice finish or you could try to use the ironing feature. Preferably in PETG to prevent a hot drink from deforming the coaster. DO NOT SELL THESE - FC…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Last minute Easter Decor Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed Scale it as you like :)
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Star Wars E11 Blaster Rifle The BlasTech Industries E-11 blaster rifle , also referred to as the E-11 BlasTech Standard Imperial Sidearm , [3] the Stormtrooper Armament Blaster Rifle (BlasTech E-11) , [4] and the E-11 Military Issue…
Print approx. €20.58–€25.15 excl. taxPreliminary estimate for one variant
Little Yoda coffee mug coaster D= 10 cm
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Sawaki Kodo Roshi - Zen Master. Sawaki Kodo Roshi was a Japanese Zen master, poet and calligrapher who lived from 1880 to 1965. He was born in the city of Hiroshima and later became an influential figure in the Soto sect of Zen Buddhism.…
Print approx. €16.55–€20.23 excl. taxPreliminary estimate for one variant
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
This is the second version of my Voronoi Stratocaster. The files for the first one have been lost, so we will pick up here! This second version fixes several issues with the first. Many of the dimensions were changed to work better,…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by a few other similar designs, this little legged display stand can make presenting those special Easter eggs for the holiday even more adorable! Done in "two colors" so you can give the legs and feet a more traditional foul…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
DL-44 Han Solo's Blaster (UPDATED 1/17/2024) the .ojb file is not to scale. Use this if you plan on scaling gun for a child or such. The .3mf file has been updated so it is to movie scale. and the sliced file with organic supports is also…
Print approx. €29.72–€36.33 excl. taxPreliminary estimate for one variant
This year, I've given my eggs a wider base, making them much more stable. I've also replaced the magnetic attachments with a simple click mechanism. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a slight…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Are you still looking for Easter decorations? Here you will find it. Here I have drawn an Easter egg which I have provided with a fuzzy skin in the slicer. I have printed it in three sizes, simply increase the scale of the object: small =…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
NO GLUE. "Řehtačka," also known as "hrkačka" or "brkač," is a traditional wooden device that produces noise, similar to clappers, mills, and various other homemade tools that were traditionally used to call people to church services…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
Very easy to print! I used PLA with 0,4mm nozzle and 0,2mm layer. You will find the biggest possible size for Prusa Mini in the files. Feel free to scale it up or down as you need. If you‘d like to print a friend for your bunnies, here’s…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
On the original Prusacaster, the hardware is placed 1.4mm too far to the left, but two more options exist for the Harley Benton hardware. mrstolarsky made a great new core with the screw holes for the alternative hardware, plus the…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Thanx to Tim ( https://www.myminifactory.com/object/3d-print-classic-roller-coaster-train-142420 ) and Don1975 ( https://www.thingiverse.com/thing:39229 ) for their good work. I changed nearly every part a little bit, so I post this here…
Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant
I designed this coaster to use in the kitchen, under the dish-soap bottle. The pattern not only looks nice, but it also prevents the bottle will stick to the coaster. The object is optimized for 3D printing and works with a wide range of…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Stranger Things coaster Diameter : 100 mm 4 layers / 3 colors : First layer (up to 2.5 mm) : black Second layer (up to 3.2 mm) : red Third layer (up to 5.2 mm) : white Last layer : black Dessous de verre/décoration Stranger Things…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Description Show off your Pokémon fandom with these Pokéball-inspired coasters! Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee…
Print approx. €4.48–€5.47 excl. taxPreliminary estimate for one variant
The Pac-Man & Ms.Pac-Man Custom Coaster Set! Featuring the iconic Pac-Man maze and the four varying Ms.Pac-Man mazes! You can always get creative and use different colors to make the alternate colored mazes. ie. Pac-Man Plus, The…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for one variant
star wars coasters including rebel, empire, falcon and fett
Print approx. €13.36–€16.33 excl. taxPreliminary estimate for one variant
Hi there With Halloween approaching, you will have to welcome your guests as they should. What better than personalized coasters for that !! I therefore offer you these 16 coasters with Jack’s face and its storage box inspired by the film…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
I created the template based on a Telecaster body model by Gustavo Rocha in GrabCad. I used it for a guitar I'm currently building. There are six parts to the template, each part sized to fit on a Prusa Mini+'s build plate. I printed them…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the cathedrals of Europe, this design is perfect for your Easter or dragon egg collection. This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed,…
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
Inspired by a planetary style gear box, this large 105mm coaster features an industrial aesthetic focused on spur gears. This large design can accommodate any normal or oversized drinking glasses. The embedded spur gear pattern below…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
Podtácek pod sklenici piva
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for PETGSource material: PET
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Print approx. €2.98–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
Here's another Spider-Man coaster, this time based on his Iron Spider outfit from Avengers: Infinity War & Endgame. Also makes a good action figure stand. Happy printing!
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
1/24/23: Revised files to include separate STL's (Sorry about that) 2/16/23: Added a combined STL for use on Multi-color printers. 9/3/23: New stuff to make your prints better! Added 3mf formats for everything (Yay rounder circles) Added…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
This is a blaster from the new Star Wars movies with Finn and Poe Dameron. They both used a new Rebel-Blaster like this. It was designed by me in Onshape and has many separate parts. The base part is available as one part or as a splitted…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
Our 2023 RAM Promaster Van has 3 cup holders below the console. They are hard to reach and do not hold our mugs. We have a cell phone holder, but not the wireless charger. This model easily slides over the cell phone holder and rests on…
Print approx. €13.40–€16.37 excl. taxPreliminary estimate for PETGSource material: PET
Protection For Radiomaster BOXER Controller Gimbals
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…
Print approx. €5.22–€6.37 excl. taxPreliminary estimate for PETGSource material: PET
Simple model of Easter basket. Printed from orange Rosa3d Pet-g. Material: Pet-g recommended ( PLA, ASA, ABS etc.) Layer high: 0,2mm ( 0,3mm possible to print) Support needed
Print approx. €17.77–€21.72 excl. taxPreliminary estimate for PETGSource material: PET
Print No supports or brim needed.
Print approx. €5.59–€6.83 excl. taxPreliminary estimate for one variant
The middle part file is for stabilty of the two feets. Just insert them in the hexagon of the the stand parts, you can fix it with glue, but it's not required. You may print a second one for extra stability 150mm should work fine, added…
Print approx. €5.93–€7.25 excl. taxPreliminary estimate for one variant
A Fender Stratocaster Volume/Tone Knob :-) Layer height 0.1 mm for best look. For the MINI knob use paint-on support (see Image) Remove the support with a knife or similar. The MK3S knob needs no support. Printed with PETG. Prusa slicer…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
I made a model of the Master Sword from BOTW. Sadly it requires supports. PRINT IT VERTICALLY this make it easier to remove supports and the quality will be way better also if you print it vertically then you can make the hilt a different…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
il s'agit d'un dessous de verre légèrement modifié en taille de l'original qui est juste le logo du groupe
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
Recreated the original to be scaled down to coaster size (the file is 200 x 200mm, just scale X and Y to preferred size). The text scales better with this model, doesn't leave gaps any more. There is a dad joke at the bottom. Use the…
Print approx. €8.38–€10.24 excl. taxPreliminary estimate for one variant
A simple yet elegant and fast print Gryffindor coaster for your hot or cold beverages. Enjoy!
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
A FC Bayern München Coaster for multi-material printers (there's also an .stl for single color). Just take your colors and go for it. It's designed with a bottom layer if someone want to use a flexible filament (I've not testet it until…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
Print approx. €11.35–€13.87 excl. taxPreliminary estimate for one variant
UPDATE Guitarv2.stl now has the Bridge and Pickups lowered by 12mm to fit the BexGears kit better. The 4 holes used to attach the neck are in totally different areas. PrusaCaster mod for BexGears Electric Guitar Kits…
Print approx. €43.14–€52.73 excl. taxPreliminary estimate for PETGSource material: PET
Crazy Cart upgrade of swivel wheels. Requires $5 of hardware store parts and old wheel components. YouTube Assembly Tutorial: Sizes: 3D printed housing fit wheels with dimensions roughly ~75mm x 45mm Recommended Wheels: Quality…
Print approx. €19.67–€24.04 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €12.98–€15.86 excl. taxPreliminary estimate for one variant
Mastermind is a game where must solve your opponent's code. Printing instructions Print 16 code pegs in all six different colors. Print 25 key pegs in white and 25 key pegs in black. Glue the decoding board to the cover. Rules of the game…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Peaky Blinders - coaster Diameter : 100 mm 2 layers / 2 colors : First layer : white Second layer : black Dessous de verre Peaky Blinders Diamètre : 100 mm 2 couches / 1 couleurs : Première couche : blanc Deuxième couche : noir
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for one variant
Hi all lovers Easters time I created an Easter bunny wreath, for everyone who loves Easter. Ideal for decorating your front door. I hope you will like the model and it will decorate your home. Happy Printing :-)
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
A simple yet elegant and fast print Ravenclaw coaster for your hot or cold beverages.
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Drink coaster. Argentina Sol de Mayo emblem. Print with brown, gold/yellow, and white colored filament. 0.2mm layer height. PLA filament. 15% infill. Used brown for first 1.4 mm, then gold/yellow for 1.4 mm, then white for 1.4, and then…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
english You can scale the model as you wish, depending on what your printer can handle. I have packed 3 sizes (40, 50 and 60 mm high) into the slicer file. I printed it in PLA with a layer height of 0.2 mm. The egg with a height of 40 mm…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Game of Thrones coaster - Targaryen Diameter : 100 mm Dessous de verre/décoration Game of Thrones coaster - Targaryen Diamètre : 100 mm
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Keksausstecher für Ostern (Osterhase + Ei) Cookie Cutters for Eastern (Bunny + Egg)
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
For printing or CNC cutting from a sheet stock. Native scale around 75mm in diameter, scale up or down as you like LIKE - SHARE - COMMENT - TIP Take a look at my other designs:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
One colorchanges every 1mm (two changes in total). When printing the upside-down version: start with white, change to red and finish with black. You can print the model upside down to give the top surface a nice finish or you could try to…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
This coaster is a perfect choice for every 3D printing nerd. It's easy and fast to print. Feel free to share your own experiences with the community. Design by Jaroslaw Krawczyk found on MyMiniFactory:…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Hey! I made this cute little bunny cutter for my easter cookies Size 80mm Blade Depth 10 mm Thickness 1 mm Handle Height 2mm Width 2mm Material PLA I used my Creality Ender 3
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
