Search results: b2

Sort order

975 models

P
PrintablesKajry

Lego Technic Oracle Red Bull Racing RB20 F1 (42206) wall mount

Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3

Downloads
2,882
Likes
120
Rating
5
P
PrintablesCobalt3D

Minimal B2 Spirit Airplane Magnet

Magnet based on the US Air Force B2 Spirit airplane. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.

Downloads
885
Likes
78
Rating
4.75
P
PrintablesPeter Farell

B2EMO : Andor : Star Wars Droid

B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.

Downloads
733
Likes
279
Rating
4.67
P
PrintablesMichal Fanta

Mini Straight Track - B2

Double-sided mini straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…

Downloads
510
Likes
46
Rating
5
P
PrintablesPELU

Hilti B22 Battery Holder

A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…

Downloads
329
Likes
23
Rating
0
P
PrintablesTiepolino

DS18B20 (Waterproof) Temperature Sensor Mount

Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…

Downloads
307
Likes
26
Rating
4.83
P
PrintablesJ

BTT SB2209/2240 XT30(2+2) Replacement Shell

I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…

Downloads
240
Likes
57
Rating
5
P
PrintablesREMLURELMI

NOCO Boost GB40/GB20 Button Cover (Remix)

Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…

Downloads
70
Likes
9
Rating
5
P
Printableshartzell

Tuya CB2S pogo pin jig

I needed something to make connections to the pads while I tried to flash a KMC Smart Tap Mini with OpenBK. It uses a Tuya CB2S module that's edge-mounted through the main circuit board. This jig can be held/clamped against the bit that…

Downloads
56
Likes
3
Rating
0
P
PrintablesBobino

AB2 Fidget spinner that mounts on board

This is a fidget spinner that you attach to some kind of base with a single screw. It consists of several 3D printed pieces, modified ball bearing and possibly several washers for M5 bolts. The modified ball bearing in question is the 608…

Downloads
39
Likes
16
Rating
0
P
PrintablesPachuc

Sony SRS-XB23 Speaker Stand

Sony SRS-XB23 wireless speakers are famous for their high-quality sound, but their big drawback is directionality. When placed on a desk, the sound does not travel in a straight line to the ears. This stand solves this problem . When you…

Downloads
25
Likes
2
Rating
0
P
PrintablesLord mk3s+

WPL B24 PEVNÁ ZÁBRANA

MODEL ZESÍLENÝ A PŘIPRAVENÝ PRO DALŠÍ VYLEPŠENÍ KTERÉ BUDE ZA NEDLOUHO

Downloads
22
Likes
2
Rating
0
P
PrintablesGalactic Armory

B2 Battle Droid Miniature

3D Files for a 1:12 and 1:48 scale version of a B2 Battle Droid! This is 1 pose of a 12 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory

Downloads
2,708
Likes
557
Rating
4.9
P
PrintablesCustomCreations

Voron CW2 Stealthburner EBB SB2240 PG7 Umbilical Mount

This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy

Downloads
2,633
Likes
298
Rating
4.94
P
PrintablesDET-Man

Cable Bridge PLUS for SB2209 / SB2240

Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…

Downloads
2,629
Likes
33
Rating
0
P
PrintablesDET-Man

XT30 2+2 Plug for SB2209 / SB2240

A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…

Downloads
2,274
Likes
35
Rating
0
P
PrintablesIbot_3D

Voron Stealthburner SB2040 Cover

Since the SB2040 canbus board gets pretty hot it's not the best idea to cover it with a closed pcb cover. This perforated cover improves the temperatures already a lot without any built-in fan. Used this 2000h now without any issues with…

Downloads
2,061
Likes
328
Rating
4.93
P
PrintablesKimkash

Wall Mount B2 Bomber

2.9.2023 Update: You were and I was wrong, forgot to add type of tab. Description updated, files added (some filenames had changed to avoid confusion) ____________________________________________________ The B2 bomber is one of the most…

Downloads
1,855
Likes
1,003
Rating
4.91
P
PrintablesMM

B2 Spirit Stealth Bomber kit card

can be printed together the model needs to be glued together or separately in other colours can be printed without support the Bomber is very realistic Print in place kit card , Assembly required

Downloads
1,695
Likes
253
Rating
4.8
P
PrintablesPlasticPusher

Voron Stealthburner CW2 Umbilical SB2040 CAN BUS cable anchor

[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…

Downloads
1,671
Likes
138
Rating
5
P
PrintablesTerrain4Print

Ulvheim B2 - modular fantasy ruins

I revisit the city of Ulvheim. This time we leave to craftsmen quarters and come to the powerful nobles and rich merchants. Ulvheim B2 adds to B1 so your ruins can have floors. You can print as many as you like and make something really…

Downloads
1,575
Likes
460
Rating
4.83
P
PrintablesJarda K 66

Baykar Bayraktar TB2 - Drone model

Turkish drone Baykar Bayraktar TB2 model. Printed on Artillery Hornet 3D printer. Material ABS To print from ABS, I had to add a tower, which is connected to the wing.

Downloads
1,461
Likes
130
Rating
5
P
PrintablesCondorman

SB2209 + PG7 Stealthburner Mount

Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…

Downloads
1,429
Likes
97
Rating
4.85
P
PrintablesOD_ESS_IT

Voron Stealthburner Cover EBB SB2040 / SB2209

UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…

Downloads
1,405
Likes
144
Rating
5
P
PrintablesJulius3E8

Kit Card Beechcraft Musketeer B23 airplane

In homage to my old Beech Musketeer, I made this fun little toy you get to assemble yourself. May you have a CSVU day! This one prints without supports in your resin printer. If you found this useful, it would bring me great joy to see…

Downloads
1,392
Likes
225
Rating
4.67
P
PrintablesMossi Brossi

SB2040 Fan Cover

The SB2040 has a problem with it overheating and sometimes failing with permanent damage, so I decided to look for a solution to keep it cool. Initially I found people were using 20mm fans to cool their SB2040's but these were rather…

Downloads
1,365
Likes
197
Rating
5
P
PrintablesEA3D

B2B JST XH CONNECTOR

B2B JST XH Straight Connector pitch 2.54mm 2/3/4/5/6/7/8/9/10/11/12 pin

Downloads
1,268
Likes
186
Rating
0
P
PrintablesNyxCode

PG7 / CNLINKO LP-12 mount for SB2209 / SB2240

Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…

Downloads
1,152
Likes
96
Rating
5
P
PrintablesArek

Voron StealthBurner SB2209 / SB2040 misalignment protector

BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…

Downloads
1,095
Likes
210
Rating
4.9
P
PrintablesMM

Stuka Ju-87 B2 kit card

can be printed together the model needs to be glued together or separately in other colours can be printed without support the Stuka is very realistic Print in place kit card , Assembly required

Downloads
1,092
Likes
194
Rating
4.5
P
Printablesjmillerfo

Stealthburner BTT SB2209 CAN Bus Toolhead System/Filament Cutter

Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…

Downloads
942
Likes
128
Rating
5
P
PrintablesBene

Wall Mount B2 Bomber Large Parts

This is a remix of this model: https://www.printables.com/model/544802-wall-mount-b2-bomber You can find a good and detailed wiki for the print at the origin. I intentionally didn't include the wall mounts, so he gets the downloads. I…

Downloads
841
Likes
255
Rating
0
P
PrintablesNortonTech

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS

V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…

Downloads
832
Likes
106
Rating
5
P
Printablesjeronbernal

BigTreeTech SB2209 SB2240 PCB Fan

Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…

Downloads
830
Likes
118
Rating
5
P
PrintablesTim Angus

DB9, DB15, DB25, DSUB Connector Low Profile Housing Shell Backshell

Low profile housings for old school DB style connectors, with a variety of holes for cable sizes. They snap together and don't need any nuts or screws. The numbers in the variations are the intended cable diameters, in millimetres.…

Downloads
809
Likes
36
Rating
5
P
PrintablesspTim

Bit adapter (1/4" & 4mm) for Parkside Cardless Screwdriver 4V PASD 4 B2

Print with Brim and 100% infill. I used carbon filled PLA. Optionally add magnets (6mm diameter, 3mm height): Standard size (¼") bit adapter: Insert the magnet after print. There is a press fit slot inside. Push hard to get it in. Mini…

Downloads
802
Likes
92
Rating
4.67
P
PrintablesTowapa

SB2209 / SB2240 mount for PUG - New Plug

Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.

Downloads
785
Likes
84
Rating
4.83
P
Printablespepe

lego star wars super battle droid B2 x400

Layer height: 0.15 Initial Layer Height: 0.4 How to get great quality: Legs and arms must be printed vertically (Be careful to not F*ck up with Z axis) Slow the printing process (I did on 120mm/s) Tree support is a must 10% infill 65°…

Downloads
752
Likes
86
Rating
1
P
PrintablesAquilo

MDT-like buttstock for Savage B22 Precision

MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…

Downloads
748
Likes
61
Rating
0
P
Printablesmariusbach

G2E (Galileo 2) cover for Canbus PCB (SB2040, SB2209 and similar) and 30x30 (3010 or 3007) fan

In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…

Downloads
739
Likes
92
Rating
4.8
P
PrintablesAaronTMG

B29A-BN American bomber

The Boeing B-29 Superfortress is an American four-engined propeller-driven heavy bomber, designed by Boeing and flown primarily by the United States during World War II and the Korean War. Named in allusion to its predecessor, the B-17…

Downloads
736
Likes
37
Rating
0
P
PrintablesPaul Trautner

Mellow SB2040 Stealthburner Cover with Fan

Modified cover to extend further forward to help resolve the wire pinching for the voron tap. Main body for the CW2 needs to be replaced. Based of 3D SB2209, and SB2240 should also work with this modification. The modification uses a 30X7…

Downloads
723
Likes
92
Rating
4.8
P
PrintablesI_like_planes

B2 Spirit bomber (Northrop Grumman)

This is a model of the B2 Spirit bomber. It has no moving parts or landing gear.

Downloads
684
Likes
13
Rating
5
P
Printables3DXman

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount

A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…

Downloads
665
Likes
104
Rating
4.5
P
PrintablesPierre

Voron 2.4 - Stealthburner with 3DO nozzle cam & LGX lite & BTT SB2209 & umbilical mod

Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…

Downloads
654
Likes
103
Rating
5
P
PrintablesMike F

SB2209 / SB2240 mount for PUG

Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…

Downloads
626
Likes
81
Rating
5
P
PrintablesMLoeko

Voron Stealthburner LGX Lite Mellow SB2040

As there were no available mods to fit sb2040 with lgx lite I modified the standard stealthburner body and LGX Lite mount to fit together. Inspired by standard Stealthburner https://github.com/VoronDesign/Voron-Stealthburner and lgx lite…

Downloads
624
Likes
85
Rating
4.67
P
PrintablesSven Kah

Voron Stealthburner EBB SB2209/2240 fan cover

This is for the original version of the CW2 main body, won't fit BTTs variant.

Downloads
624
Likes
65
Rating
5
P
PrintablesL-Wo

Mount for Bluetooth 2.1 Amp ZK-TB21

This is an under desk, under shelf or wall mount you can use with the Bluetooth 2.1 Amp ZK-TB21 that I purchased from Amazon. I built mine with the included metal casing on the amp as well, but I guess you could leave that off if you…

Downloads
623
Likes
43
Rating
5
P
PrintablesArnoldstrife

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide/support.

Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.

Downloads
619
Likes
62
Rating
5
P
PrintablesLittle

SB2209 / SB2240 - CW2 Cable Bridge, PG7

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…

Downloads
585
Likes
80
Rating
5
P
PrintablesCmarlow

Hilti battery holder - B22

Printed standing up with no supports. Compaired to other models this one is very fast to print and does not use much plastic at all but still locks in place.

Downloads
565
Likes
35
Rating
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief

Remix to add support for the connector as well.

Downloads
537
Likes
57
Rating
5
P
PrintablesRambelaya

NOCO GB20 and GB40 hard carrying case

Remixed from 2 items, thanks to those users for their starting points! https://www.thingiverse.com/thing:4094861 https://www.printables.com/model/251514-noco-battery-jump-starter-mount/files I wanted to make a hard case for my NOCO GB20…

Downloads
506
Likes
99
Rating
4.89
P
PrintablesPolaris

B2 bomber plane silouette

based on a B2 plane I scaled it to 90% to fit it on my build plate - took roughly 1 hr 45 to print no support, no brim, 15% infill, PLA+ used. printed with an ender 3 neo

Downloads
505
Likes
64
Rating
5
P
PrintablesEloura74

SB2040 Fan Cover Remix (3007-3010)

J'ai trouvé ce mod très intéressant pour ventiler le SB2040 sur le Stealthburner, qui montait très vite en température (environs 85 degrés). Le concepteur du projet de base parle de 60 degrés après installation. Avec la modification je…

Downloads
501
Likes
69
Rating
5
P
PrintablesKitcard Studio

2.5D Framed Blueprint | B29 Superfortress | Plane

2.5D Framed Blueprint | B29 Superfortress Print-in-place card Download the .stl file and slice/separate the parts using Tinkercad or blender if your Printer is too small! WARNING: CHOKING HAZARD - Small parts Not for children under 8 yrs.…

Downloads
498
Likes
322
Rating
0
P
PrintablesRobbert Laugs

B2EMO Starwars droid Andor

The super cute and awesome B2EMO droid from Andor Printed in 0.2 layer 0.4 nozzle Scale the parts to youre wish, this one was printed at 200% recommend atleast 200% (with 0.2/0.4) or bigger. you can print the red and metal parts…

Downloads
487
Likes
138
Rating
5
P
Printablesjamie xu

rb20 f1 car

the rb20 f1 car with texture

Downloads
481
Likes
23
Rating
0
P
Printablesjeronbernal

Galileo 2 3007 SB2209 / SB2240 / SB2040 CAN Bus PCB Fan

A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…

Downloads
467
Likes
79
Rating
5
P
PrintablesMJ JOO

Galileo 2 2507 Fan Cover for SB2209/SB2240

Maintain a unique style of Stealthburner. No screws reguired.

Downloads
467
Likes
58
Rating
5
P
Printablesahmet

ZB2L3 Case - 18650 Battery Capacity Tester Housing

I made a simple housing for the ZB2L3 battery capacity tester. It contains ZB2L3 circuit, resistors and the 18650 battery holder. There's also enough space to add a little heatsink block on top of the resistors. Only "Resistor Vent.…

Downloads
463
Likes
56
Rating
4.5
P
PrintablesGonzoStrange

Updated CW2 EBB SB2209 Fan Housing / Filament Sensors for ERCF / Filametrix / Dragon Ace

CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…

Downloads
459
Likes
65
Rating
5
P
Printablesprouting

Puller Nozzle Heater and Thermistor Connector Elegoo Centauri Carbon -Updated16Feb26-

Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…

Downloads
450
Likes
77
Rating
5
P

Galileo 2 SB2209 strain relief

Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.

Downloads
439
Likes
48
Rating
4
P
PrintablesMarcel Frehe

Bit Adapter 4 & 6 mm for Parkside PASD 4 B2 Cordless Screwdriver

Summary These are very truth to the original design adapter für 4mm or 6mm (¼ Inch) standard bits. Made one 4mm version and two 6mm versions, one with and one without a 6x3 magnet slot. If u need help getting the magnet in after printing,…

Downloads
433
Likes
48
Rating
5
P
Printablesseage

StealthBurner - KNOMI - CAN (SB2209/2240) - CPAP - NOZZLE CAM

This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…

Downloads
432
Likes
67
Rating
5
P
PrintablesKieran E

EBB SB2209 updated CAN cable holder

It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!

Downloads
427
Likes
30
Rating
4.67
P
PrintablesDebolestis

MikroTik RB260 19 inch rack mount

This is 19 inch rack mount for MikrotTIk router RB260GSP . There are 8 parts that need to be printed. Parts named 19-plug and 19-switch clip are not necessary. If printed part named 19-plug must be printed twice. I printed parts in PETG,…

Downloads
418
Likes
69
Rating
0
P
PrintablesCqcomber

3010 sb2040 stealthburner pcb cover

This is a cable door for can bus(mellow fly sb2040). This is still a work in progress, but am uploading current step and stl for anyone to modify. There is a version already on printables for a 30x30x7 fan, but most people would have…

Downloads
414
Likes
46
Rating
5
P
PrintablesKeepy

Mikrotik RB260GS Rack Mount

Printer: Creality Ender 3 V2 NEO Filament: eSun PLA+ Orange Tailored for home and small office environments, this design incorporates additional options for mounting Mikrotik desktop devices on your network rack. If you have a design in…

Downloads
413
Likes
58
Rating
5
P
PrintablesFocusDesignCo

Dewalt DCB207 Battery Case Lower Casing

The lower part of the Battery housing for my drill broke. I designed this to replace it. Its not perfect, but does the job.

Downloads
401
Likes
24
Rating
0
P

GA-B2100/GA-2100 replacement case

This model is supposed to look pretty close to the original casioak resin case. If you need to replace it or just want to experiment with other materials and colors, this is for you. Just print it on its face. With good settings it is a…

Downloads
400
Likes
21
Rating
5
P
PrintablesMehTechArt

Audi 80 B2 Wall-mounted

Please click if you appreciate my work : ) A throwback to chrome bumpers and honest engineering. This 3D printable wall-mounted sculpture of the Audi 80 B2 pays tribute to a true German classic of the 1980s. The boxy, iconic silhouette…

Downloads
400
Likes
137
Rating
4
P
PrintablesLocki

Stealthburner SB2040 FLY cover for 30 mm fan

Update: added latest Stealthburner stable version Connected to FAN2 5V and gpio15, my klipper settings: [controller_fan sb2040-fan] ## SB2040 5V fan pin: sb2040:gpio15 kick_start_time: 0.5 # full speed to spinn of fan fan_speed: 0.9…

Downloads
398
Likes
44
Rating
4.25
P
PrintablesBlueGooGluey

Stronger Hex Ventilated SB2209 SB2240 Door with 3007 Fan

Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.

Downloads
398
Likes
50
Rating
5
P
Printablesbighlo

Parkside pka 20-li b2 SUP adapter

this compressor its realy slow to fill up my large padleboard. so i create a modification from this model to able to connect to a nother side to compressor. it is able to fill up my padleboard wery quickly and after i use the original…

Downloads
385
Likes
49
Rating
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover

Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.

Downloads
375
Likes
45
Rating
5
P
Printables3DeezNutz

Voron Big Tree Tech SB2209 RP2040 canbus cable support

*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…

Downloads
372
Likes
50
Rating
5
P
PrintablesTrogdor

BTT EBB SB2209/2240 Voron Vented Door

I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…

Downloads
369
Likes
45
Rating
5
P
PrintablesPapaGibby

BTT EBB SB2209 USB Mount

This is a multipurpose mount designed for the BigTreeTech EBB SB2209 USB 1.0. The EBB SB2209 USB comes with a small USB to CAN adapter. I was not able to find any suitable mounts for this small chip and thought I would try my hand at…

Downloads
369
Likes
37
Rating
4.75
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 ECAS

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.

Downloads
361
Likes
33
Rating
5
P
PrintablesPixel-Pete

Parkside PPWD 30 A1 / B2 OSVac F32 Adapter

Für meinen Werkstattsauger Parkside PPWD 30 B2 (auch für PPWD 30 A1) habe ich einen OSVac Adapter F32 für den originalen Anschlussstutzen erstellt. Gedruckt mit Sovol SV06 (Düse: 0,6mm / Layerhöhe: 0,2)…

Downloads
355
Likes
40
Rating
0
P
Printablesjphalip

Stealthburner mod for CPAP, LGX Lite and SB2040

This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…

Downloads
354
Likes
74
Rating
0
P
PrintablesHadrik.

Stealthburner CW2 EBB2209 CAN PUG (Umbilical)

Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…

Downloads
352
Likes
44
Rating
0
P
PrintablesRESTLESS DESIGN

DS18B20 Thermometer Flat Mount

I needed a more low profile mount for the DS18B20 to place it inside my enclosure without it interfering with the 3D printer. This design does just that, allowing me to access the printer without the thermometer getting in the way. You…

Downloads
351
Likes
31
Rating
5
P
PrintablesOverLord6920

Knomi Cpap Stealthburner sb2240-2209 No Camera

Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.

Downloads
333
Likes
52
Rating
4.75
P

Hilti B22 Nuron Battery Mount

I printed in PLA at 15% infil with no supports, and it held the B 22-85 I tested it with Holds the battery well enough to not fall out, but loose enough to easily take the battery out when needed. I had designed this and printed it for a…

Downloads
327
Likes
14
Rating
0
P
Printablesglsf91

Clamp for DS18B20 for 15 or 22 mm pipe

Clamp for connecting DS18B20 to 15 or 22 mm pipe. Used for temperature measuring heating radiator. Best to print with ABS or PETG because of temperature used for the heater. Category: Electronics

Downloads
326
Likes
32
Rating
5
P
PrintablesStonXX

Lade/Test Batteriehalter für 18650 Zellen zum Anschluss an ZB2L3 Batterietester o.ä.

Batteriehalter aus altem Batteriepack einer Lichterkette ( nur die Pole verwandt ) Der Halter ist für Bananen Buchsen vorgesehen mit 4mm Gewinde, Damit kann man eine 18650 Zelle testen oder auch Laden. Die Batteriepole sind auf eine…

Downloads
317
Likes
134
Rating
5
P
PrintablesGusk

Galileo 2 EBB SB2209 Cable Gland Mount + Lid

All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…

Downloads
313
Likes
32
Rating
5
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Downloads
312
Likes
36
Rating
0
P
PrintablesLocki

Stealthburner SB2040 FLY cover for 25mm fan

Cover for 25x25x7 mm fan Connected to FAN2 5V and gpio15, my klipper settings: [controller_fan sb2040-fan] ## SB2040 5V fan pin: sb2040:gpio15 kick_start_time: 0.5 # full speed to spinn of fan fan_speed: 0.9 #reduce speed to 90% heater:…

Downloads
306
Likes
43
Rating
4.67
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…

Downloads
305
Likes
21
Rating
5
P
PrintablesSkovik

CANON 25 Backshell, DB25 Cover for connector

Backshell for Canon 25 connector (LPT, COM, etc). Krytka pro konektor typu Canon 25. Print instructions Backshell for connector Canon 25 (DB25). Used for LPT or COM - 25. Three versions, for cables: ø = 5 mm ø = 7 mm ø = 9 mm Fasten…

Downloads
300
Likes
9
Rating
5
P
Printableskaragoal

Mellow SB2040 LGX Lite PCB Mount

The original mount did not work for me so I designed this one which works great on mine. The original mod is here: https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 Needs to be printed with supports.

Downloads
296
Likes
28
Rating
0
P
Printablesmizutani_hu

Traction Assist Wheel for Parkside PMRDA 20-Li B2 robot lawn mower

3D-printed auxiliary wheel for Parkside robotic lawn mower, designed to mount onto the drive axle to enhance turning capability and traction on grassy or slippery terrain. The toothed outer edge improves movement efficiency, while the…

Downloads
292
Likes
30
Rating
0
P
PrintablesLinthis_world

DS18B20 temperature sensor holder

Like it? Please don’t forget a like any maybe a follow, thanks a lot. (morg For more Project’s and insights, see my Instagram or TikTok Account (Link in my Bio)

Downloads
282
Likes
29
Rating
5
P
Printablesdav88

gb22 revolver

a revolver prop version using the gb22 frame design. i made the liners in case you want to make different liners in other calibers. for show. rotate the cylinder for each shot. cylinder and barrel liners held in place by the nut fixed the…

Downloads
280
Likes
21
Rating
0
P
PrintablesWaebis-Lab

D-Sub / DB25 Connector Plug Holder

The plate should have the correct space around the connector. Because it is drawn with official measurements. Just substract the plate from your object and the connector is integrated in your design. The cut is also intend to be cut of…

Downloads
280
Likes
16
Rating
5