45 models
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
Print approx. €35.01–€42.79 excl. taxPreliminary estimate for PETGSource material: PET
This design is a modular HDD rack system that allows for flat printing and can be assembled in any number of drives you'd like. I've also designed a backplane to allow for hot swapping of drives and outputs to a SFF-8087 connector to…
Improvements Version 2 is a redesign with the feedback I've received on version 1 over the past year. Some of the improvements made are: Back plane support (28mm, 29mm or 30mm) Hot-swap snap fit, as opposed to the heat set insert mount of…
5 drive backplane is the main part. I printed mine with 25% infill and 5 walls, so it is mostly solid walls for strength. I recently added the 3 drive backplane. It does require trimming one of the square pegs on the 5 drive cage that…
UPDATE: I slightly tweaked the HDD baseplane, now the hdd slides perfectly. Every tenth of a millimeter counts. UPDATE 2: I modified the HDD part and removed the extrusion. I uploaded the full fusion 360 file under the name v2.1, and the…
HDD Enclosure with Backplane This enclosure offers 8 bays for 3.5" drives. Backplane used Supermicro SAS825TQ(other backplanes might work but this model was created with this one in mind) Compatible caddies: My Remix of the Dell Server…
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
This is an improved version of my original enclosure. The honeycombs of the enclosure can be broken out if desired. Supports are not absolutely necessary, but I have used some on the housing for the guide grooves and on the fan holder. In…
I wanted to create a Power Bank in a very thin box, and designed a specific battery connection holder and a backplate cable guiding, all in 39,2 mm tall. Read the document for full specs and instructions. Hope you like it! Note: feel free…
I made yet another 2.5" to 3.5" form factor disk adapter. This one is primarily intended to be placed into 3.5" HDD hot swap bays, which can commonly be found in many server chassis or even midi or big tower configurations. It is designed…
After my last move these hooks were broken, so I had to make a few of them in order to assemble my wardrobe again. Working very well, better than the original ones. Uses minimal supports, done by painting them in PrusaSlicer. I usually…
An 8 bay 3.5 inch HDD enclosure designed around the Jonsbo N3 backplane which can be purchased separately for ~€15. I have also Included a mounting piece for the Thermaltake CoreV21. The main assembly is fastened to the mounting plate…
I need the spool mounted alongside the backplane of the printer, so I have remixed the nice design fom BC. In fact only the spool-roller was untouched, the mount itself has been redesigned. It should be possible to further reduce…
This is not a remix this is more an addon for the great model: https://www.prusaprinters.org/prints/4665-stargate-sg-1-multi-material Print instructions Print straight away. no support no infill needed you can speed printing with 0.03 mm…
Bought the Fractal Define R5 used and had not enough of the rubber grommets and screws to mount all my drives. Luckily I found @PeterVaughanT_303929's excellent model of the SATA backplane. With @falo's design of the tray for the…
In order to continue using an old SAS backplane from a Dell PowerEdge R515, I have built a hard disk enclosure. In my case it is a “DELL 0X836M SAS backplane”. The enclosure can be used with or without a backplane. HDD Cooling is…
This case mod allows you to add 4 additional drives. It uses the standard Jonsbo 4 disk backplane found on the N4 and N5 case series. It can be easily purchased from many stores on Aliexpress . There is enough room for a standard…
I made this to give my GPD Win Max 2 a better grip and to protect the backside of the display from scratches and to let it look pretty individually and specific. I made it using OpenScad with a self developed algorithm, where you can set…
Exactly what the description says, this is a 3D printed cage for an inexpensive 4x3.5'' SAS backplane found on AliExpress. The backplane in question: https://aliexpress.com/item/1005008761856159.html Current version is 5.1. The holes for…
Holder for fixing cabinet back walls (IKEA etc. furniture) (screw required)
Jonsbo N3 Backplane Rack Mount This model is designed to mount the Jonsbo N3 Backplane within a 10-inch rack , providing a secure and space-efficient solution for NAS (Network Attached Storage) system builds. The bracket allows for clean…
Quick redesign to Dopins' Supermicro caddy, just adding a bit more clearance around the SATA/SAS ports to avoid some interference with the backplane connectors. Follow the original printing guidelines. 0 tops, 0 bottoms, 8% honeycomb…
This enclosure was designed specifically for use with the CFI-BXX53PM sata multiplier, but has the standard spacing for backplanes. My design uses these handles I designed. For a generic 5 drive enclosure see the alternate version here…
1x Backplane: https://www.aliexpress.us/item/3256808318459164.html 1x Rails: https://www.amazon.com/dp/B08S6T53VW 17x Heat-set inserts: M4x0.7 6.4mm: https://www.mcmaster.com/94459A160/ 5x PCB Bolts: M4x0.7 6mm:…
2.5" SSD adapter for Fractal Define R5 SATA backplane
RC2014 Backplane Pro Case “ RC2014 is a simple 8 bit Z80 based modular computer originally built to run Microsoft BASIC. It is inspired by the home built computers of the late 70s and computer revolution of the early 80s. ” - source:…
Ever have a backplane that you're just simply too lazy to mount in a real chassis? Plugging drives straight into such a thing could stress your U.2 connectors so I made this bracket that more-or-less holds them in place while they're…
A relative Simple CWWK NVMe Backplane Mount for the Jonsbo N3 Case. Use M3x3x4.2 heated inserts (4.2mm is the outer dimension and 3mm is the length). insert the heated inserts like in the second image. Then mount the backplane and the…
Incase it is required to maintain some distance between the wall/ceiling and the backplane of the UNIFY AP Pro (e.g. for Keystone adapter) then you can use this distance enclosure. Current design uses Ruthex melt-in threads, but - as I…
id : sc20051cb11 size : 71.5 x 71.5 x 5 mm pieces : 1 total print time : 50m Instructions : lamp link : http://www.thingiverse.com/thing:1489831 Category: Decor
id : sc20051ab11 size : 80X60X5mm files : 1 pieces : 1 total print time : 50m Instructions : lamp link : http://www.thingiverse.com/thing:1462539 Category: Decor
Customize the number of drives per row and number of rows using the provided SCAD file. Tested with a variety SSDs and hard drives, but still may not work with some drives depending on their thickness.
A simple backplane allowing a HW-411 DC-DC Step-down Buck Converter to be secured to the backplane along with IN and OUT cables; making wiring the converter in-line more secure. Required: X1 - HW-411 DC-DC Buck Converter X2 – M3*4 Screws…
Completely remodeled to reorganized a bit and added mounting tabs for quick disconnect pins (spring pins).
my small modifications. split in half for printability.
the 15th generation mounting backplane made for the Elegoo Neptune 2 is now finalized with a stiffer design and includes a part cooling duct made by @ p3t3rp4nd4 please see the photos as reference to the installation of your new E3D…
This is a drive cage designed to go with a custom 4x SATA backplane. It is vibration isolated using rubber standoffs. The cage holds the 4 drives using the bottom four screw holes in the HDD. Using din912 m3x6 screws, the head itself can…
I decided to build a simple wood case for my Xi8088 build. Drafted and printed this simple model. Using small wood screws it anchors well to a piece of plywood. Holds the backplane down securely.
This is a remix of the 2.5" Hard Drive Caddy for Lenovo for servers with a shorter backplane like mine has. My server is a 7DCE (ST250).
Apple IIe backpane / backplane One thing I find a bit annoying is unplugging my drives, HDMI cable and other peripherals from inside my Apple //e computer. This poses a risk of damaging the interface cable and even the slot. It would be…
Backplane Gland Type Two These are glands ( not clamps ) that protect the ribbon cables on 20 way peripheral devices and stop the ribbon cable from becoming frayed due to rubbing against the metal back planes of the Apple //e. Type Two is…
This is a 2 part support that let you fix an AC socket to a fence. The hole are 70mm x 55mm spaced and work with this kind of wallbox : It use 3 M3 square nut and 3 12mm M3 screw to clamp the 2 part together against the fence. Don't over…
Backplane Gland Type One These are glands ( not clamps ) that protect the ribbon cables on 20 way peripheral devices and stop the ribbon cable from becoming frayed due to rubbing against the metal back planes of the Apple //e. Type One…
Backplane for a Giesse window handle, with stops for the three positions close/tilt/turn. I don't know the precise handle model nor the piece number. Printing You'll need 100% infill and a strong material. I tried PETG at 30% infill and…
I got those backplanes very cheap, so obviously I had to go ahead and spend days designing and printing a way to use them lol. To the point, pros: It's modular, you can stack as many as you want. Im using two backplanes arranged…
