Counting matching models…
In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…
Zweiteiliger Druck! Gemacht für verschiedene Fadenspulen Grössen und speziell für BERNINA Nähmaschinenspulen . Die zwei Teile können einfach mit z. B. Sekundenkleber zusammen geklebt werden. Die beiden oberen Teile sind unterschiedlich…
!! Print at 3x scale, else tolerance will be incorrect !! The following datasets were used: height model: swissALTI3D landscape model (Buildings): swissBUILDINGS3D 2.0 Steps: Combining the height model and the landscape model into a…
A magnetized case for the wonderful Anbernic RG40XX H handheld. Use 8 6x2 mm magnets and glue the foam from the package to the lid. Use another foam with a 6 mm width if you don't have the original anymore.
One spool for binding and it fits on the knee lifter of a Bernina 570 QE. I printed this spool from PLA. The middle hole looks very big, but when the sewing machine is on a flat table, you need this size of hole for the spool to turn…
Someone I love very much was an amazing designer and sewing guru, just wanted to do something to remember them today and ran across the contest. Don't forget to hug your loved ones while you can.
Takes about 5 XL Bernina Spools and is for the Skadis System. Print with some support, and I used a modifier to increase the strength and maybe the lifetime. I printed in simple PLA, Petg and abs etc. should also work.
I needed a better way to store my bobbin with the matching thread so I designed this part to slip over the thread post so I can store my bobbin along with the thread. This is the first model I have made! Both the top and bottom post are…
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
A simple protective case for the Anbernic 35XX “H” handheld. Features: Slim profile hinge dual-latch closure cutout for USB-C charging while it's in the case View port for charging LED status while in the case and charging Prints easily…
This highly detailed 3D model depicts a futuristic cybernetic hand . The design combines elements of robotics and biomechanics, showcasing intricate cable systems, mechanical joints, and armored plating. The fingers are segmented and…
I wanted some better ergonomics while I played my games. I remixed the grips from STR to fit the RG35XX. It's a snug fit. Printed in PLA with supports on build plate.
Miniature of Real Madrid stadion Print Layer high: max 0.3 mm infill: 15% material: PETG, PLA
A scale model of the tabernacle of Moses according to Exodus 25. For visual representation, scale is not exact. Print instructions Print 100%. Make sure the Slicers can distinguish the 7 Candle sticks.
The Anbernic RG35XX H is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
Here my Guide Rail Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Guide Rail ;) Update 13/01/2022 -add stronger plate to the bottom part -add a pair of…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
IF YOU NEED THE EPIC ULTRA FOR THE "RG351MP" ( Metal Plus) FOLLOW THIS LINK!!!: https://www.printables.com/model/240177-anbernic-rg351mp-game-pad-epic-ultra Please respect the Licence the thing comes with! Thanks Thanks to Thingiverse…
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
"BerninaFeet.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 2 large and 2 small sewing machine feet. "BerninaFeet2.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 5 small sewing machine feet. My wife…
I created a Measuring Tool for my Systainer to fast determine my loose screws up to 70mm length and diameter from 2mm to 6mm.
Spacers to increase the Omni's armrest sliding resistance - one for the right, and one for the left. They're different since the left needs to accommodate the cable for the electronics. Recommended printing settings: I used PLA+ but…
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
This highly detailed 3D bust pays tribute to one of the most iconic cybernetic characters in sci-fi history. Half human, half machine – this model captures the raw power and stoic intensity of a futuristic warrior with a damaged exterior…
This is a simple stand for the Anbernic RG35XX. I was having some trouble with bed adhesion so I added tiny tabs on the corners that are easy to cut off and added that as a second STL file. They are 0.15mm tall so they should only be 1-2…
This model pairs well with the remixed stacked triggers for the RG505 on my page, it was inspired by a design I found but couldn't get the STL for, this was modelled in Blender, The model itself is alright and doesn't stand up on its own,…
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
Information about the model: Inside the case there is about 1mm of play on each side so that foam rubber or similar damping can be attached. The lower shell (Part_2) has an elevation so that the shoulder buttons are not pressed in.…
Anbernic RG351p case. Designed to be printed as one model without supports The height of the case is made to add the original white foam that is added in the box with the console. If you don't have this foam the console rattles a little…
Friends of ours love cosplay and what better way to handle a terrible situation with the loss of hair due to chemo, than to turn up as a Cybernetic character from Star Wars ; ) Cheers Jace Sizing should fit a large adult, but do check the…
Add modern comfort to your miniature scenes with this collection of STL files featuring contemporary sofas and chairs. This pack includes realistic models inspired by Bernhardt and BoConcept designs, ideal for dollhouses, dioramas,…
If you like this model, show some love, hit the like button. Version 2 of the ergonomic grip for the Anbernic RG 35XX (RG35XX). Now has rounder corners for comfort and different printing orientation. Print in PLA Needs supports
Here's a form-fitting, slim case for your Anbernic RG405M. You spent a lot of cash for your premium Anbernic device… so why not protect it in custom-fit style instead of using all the the generic soft-shelled case options out there? This…
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
UPDATE [4/30/26]: In lieu of Libernovo changing the hollow square slot to be solid, I have designed a newer version that will work with all models and is stronger. After taking apart my armrest after months of using the first version, I…
A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…
A statue modeled and painted of a bernedoodle dog, but looks very similar to other dogs (especially other doodles). Print multicolor with your dog's colors, paint the model in the slicer to match your dog, or print single color. Great to…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
Eine kleine Krippe, modelliert in Anlehnung an das alte Ulrich Bernardi Krippenhaus von ANRI . Die Höhe beträgt etwa 54 mm. Die Montageabstände sind auf 0.2 mm eingestellt, so dass auch Drucke aus nicht korrekt kalibrierten Druckern…
Nähfuss-Halterung für BERNINA und SKADIS. Drei Versionen: - normal - grössere Füsse - normal mit extra Halter für den Fuss 3A. → Siehe Bilder *** Sewingmachine foot holder for BERNINA and SKADIS. Three versions: - normal - bigger feets -…
Clean display stand for this amazing little machine
Storage tray crowbar feet 9mm and 5.5 mm compatible BERNINA Accessory Box. Addition of models for the IKEA panel.
Please respect the Licence the thing comes with! Thanks Thanks to user "Threat_Craft" who test printed the prototype, provided pictures and the dimensions so I was able to adapt the epic ultra to the RG353m as I don't own it myself.…
I needed an easy way to track and find my Toolbox. For this i use an Apple AirTag and i tried to find a “hidden” place for the Tag, because i need the space inside my Toolbox and the the tags should not be easy to find. So i create a…
Used PrusaSlicer to customize the RG35XX stand made by jlips. The Anbernic logo is borrowed from the boot logo I'm using for a different look. I also added negative volumes on the bottom for rubber bumpers I had laying around to ensure…
Unleash the future of the undead with this detailed Cybernetic Skull Bust , a striking fusion of machine and bone. Whether you're into sci-fi, robotics, or just love clean mechanical aesthetics, this bust makes an epic desktop companion,…
Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…
This is complete set of models for the Mishkan, or Tabernacle of Moses. It includes dioramas of the complete courtyard (without fabric elements), the courtyard objects, the mishkan, the ark, and the other mishkan objects, as well as some…
Inspired by the idea of 3DWunderwerkstatt I create my Bosch GSR 12v cordless screwdriver holder for Systainer T-Loc Systems. It’s designed to fit on all sites and for left or right handed people. I created a bit higher then other people…
The Anbernic RG405M is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
The knob on my propane torch snapped when I dropped it. So I made a new knob with the features we all love like press fit and knarled. Have a great day!
This is my attempt to make a grip to make the win600 a little more comfortable and usable. Its not perfect by any means, and likely would be best used with stick covers, but it is a large improvement over stock. The fit is intentionally a…
3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.
An all 3D printed case for the Anbernic RG35XX Plus. No screws are needed for the assembly. if you a short cable or a fiber cloth you might be able to store it ind the case to :) When printed, just put the lid on and put some 1,75mm…
IF YOU NEED THE EPIC ULTRA FOR THE " RG351P or M ( Plastic or Metal) FOLLOW THIS LINK: https://www.thingiverse.com/thing:4702672 !!WARNING!! After placing your RG351MP into this game pad holder, be prepared that you never ever want to…
A simple spacer to add to the Omni's armrests to significantly increase tension.
A cask like you'd see on a St. Bernard
These are some custom replacement buttons I made for the Anbernic RG35XX.
🐾 Bernese Mountain Dog The Bernese Mountain Dog is a gentle giant known for its striking tri-colored coat, calm temperament, and deep devotion to its family. Originating in the Swiss Alps, this breed was historically used as a versatile…
This is a case for the Anbernic RG405v. It's meant to felt lined to protect your device and create a snug fit. I use 1.2mm x 31.8mm wire brads for the hinges. They're press fit.
Feel free to use this to develop your own accessories!
A simple stand for the Anbernic SP
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
Bobbin holder for bobbin thread jumbo bobbins from BERNINA. An bulge was constructed each side so that the coils snap into place and cannot fall out. In version 2 one bulge was removed, otherwise too much pressure would be exerted on the…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly Bernese Mountain Dog in a calm standing pose with…
I created a set of dogs that are easy to print and scalable to any size! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
This model was remixed from ScottMuc's Anbernic RG405M Shoulder Buttons , scaled and edited to fit the RG505, although its recommended to print with SLA printers, I printed mine with FDM (Kingroon KP3S) and there were zero issues with…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
Display stand for the retro gaming devices Anbernic RG353V and RG353VS.
Fridge magnet of a Bernese Mountain Dog. Designed for 3x 4x1mm magnets. gcode files for 1 piece and also for 4 pieces at once.
Grip, front cover and stand for the Anbernic RG351V retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons or connectors on the bottom of the device. The front cover protects the screen, top…
A mount for the RG40XX V for the IKEA Skadis Pegboard with a neat Anbernic logo on the side
Version 1 of the Anbernic RG28XX grip.
This was created in Fusion 360 from a 2d piece of art I found on the internet. Slice it at 0.2mm and each color change will fall exactly on a new layer. Throw in an M600 command anywhere you want to change colors and print away. These…
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
Fridge magnet of a Bernese Mountain Dog head. Designed for 4x 4x1mm magnets.
Here my Spirit Level Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Spirit Level ;) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
I built this to protect my RG28XX screen from pocket sand (gotta be protected in case of an attack) or the occasional drop in and out of the pocket. Its friction fit. Its designed for the foam that came in the box to protect the screen.…
Mount for the RG351P on the Ikea Skadis
My wife has a Bernina 800 sewing machine with a lot of different "Presser feet", so I designed this 3d printable hanger so she has them organized and easily accessible. This hanger is for the "9mm" presser feet, which works on many…
I created a set of dogs that are easy to print and scalable to any size! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Trays and lid for holding Bernina Artista 170 sewing machine bobbins. While I'm sure the bobbins are used in other Bernina models I don't know which. Each tray holds 25 (5 x 5) bobbins. Trays stack together. The lid snaps into notches in…
Bobbins for the Bernina 700 and 800 series are a little odd. They aren't symmetrical -- one side is bigger than another. This is an organizer to pack these fairly densely while keeping them accessible with thread color visible. I designed…
Fridge magnet of a Bernese Mountain Dog head. Designed for 4x 4x1mm magnets.
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
This grip is for the Anbernic RG35XX H, making it more comfortable to hold while you game. Its ergonomic shape helps reduce hand fatigue during long sessions and gives you a better grip, so it’s easier to enjoy your games without your…
I liked the feel of @dildesigns ergonomic grip and the sleekness of @m00nd0gg slide on design , so I hacked them together to create this slide on ergonomic case for the Anbernic RG35XXH. I printed in PETG, 15% gyroid infill, and supports…
This is a (hacked together) RG 40xxH Grip Case. I am very new at this and basically took the TrimUI Smart Pro grip case (with permission received via DM) by @dildesigns and reshaped the inside to fit the 40xxH. The original grip case by…
A freestanding/desktop Bernina presser foot cabinet that holds up to 10 small feet & compartments for 2 large feet.. Print with the front side up. Use the attached f3d file if you want to make adjustments. Compatible with the OEM Bernina…
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
Made a couple modifications to builman's BERNINA bobbin spool tray to enable clean printing with no supports. Print instructions Category: Replacement Parts Summary Made a couple modifications to builman's BERNINA bobbin spool tray to…
Ersatz Zahnrad für das originale Doppel-Zahnrad mit 120 - 127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Da man das originale Doppelzahnrad 120-127 nur für zöllige Gewinde benötigt, genügt das 120…
I would suggest to print the top and bottom part of the bobbin separately (split parts provided) and glue them afterwards (no support required). Or print the whole bobbin in one piece (support material required). I printed in PLA, 0.2 mm…
This is a snap case for the Anbernic RG353v. It's meant to be felt lined to protect the device and to create a tight fit. I used 1.2mm x 31.8mm wire brads for the hinges.
Fridge magnet of the head of a Bernese Mountain Dog. Designed for 4x 4x1mm magnets.
This is a grip for the Anbernic RG35xx. It's got long handles for people with larger hands. Edit: Adds a v2 with a stronger grip on the console and a rounded bottom so it doesn't cut into your finger as you play (sorry about that with V1)…
