No Trespassing – We are tired of hiding bodies!
I used red for the 1ste layer, white for the second and black for the 3th. You can use different color's. Please upload a make if you download it :-)
- Downloads
- 370
- Likes
- 325
- Rating
- 5
Counting matching models…
I used red for the 1ste layer, white for the second and black for the 3th. You can use different color's. Please upload a make if you download it :-)
Molecular surface representation of two antibodies interacting with the same antigen. PDB entries 1fdl and 1yqv were matched on the Y chain and then antibody structures from PDB entries 1igt and 1igy were matched with the Fab fragments…
That is my first prototype of a kinetic sculpture/mobile… with a 90mm Earth, 70mm Moon and either a 70mm Venus, Mars or Pluto. That results in a scale of 1 : 141.733.333,3 cm for the Earth 1 : 49.631.428,6 cm for the Moon (of Earth) 1 :…
butterfly bodies for crochet butterflies - corps de papillons pour papillons en crochet --- Si vous voulez me soutenir pour mon travail ou juste si vous êtes sympa, vous êtes libres de faire un don sur ko-fi If you want to support my work…
100x160mm sign, with a directive from the Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs. You may wish to observe…
print one by one in the vase mode, set layer width to 0.9mm, 1 wall (vase mode default) Replaceable Curved Blades for Collapsing Retractable Katana (Rengok, Tanjiro and similar):…
The Snap Deck is a modular playing card holder that I started developing to help my grandmother hold her cards on game night. It ended up growing into something much bigger with feedback from the community and a lot of time in CAD and…
Another Funny Wall Sign - "NO TRESPASSING, we're tired of hiding the bodies", - multi colour print, printed in ZIRO PLA Glitter Twinkling Red and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a velocity stack made to fit 45mm wide Borla Induction Series 2000 throttle bodies. Pictured are a set of 4 installed in my Mazda MX-5. The model is 60mm tall. With enough requests I could create different sizes as well. I printed…
Attach a probe halos to your probe tip to avoid crashes with the probe body. Theses are designed for M1x0.25 heat set threaded inserts that are 2.5mm long. These are TINY. I suggest threading a screw into them, which gives something to…
You need to turn supports on. Materials : scalpel blade (example: https://www.amazon.de/gp/product/B00IU780CA/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 ) point of a circle (diameter 2mm) M3 bolt to secure the circle point M4 bolt…
These bodies replace the original, sleeved, bodies of the Hadley Neumo . All other instructions are the same. I'd recommend painting the insides with a flat black paint. Change Log: 5/11/2025 (Small Update) Added a rigid accessory…
NO TRESPASSING, WE'RE TIRED OF HIDING THE BODIES, sign Category: Signs & Logos
What the heck is Print-on-Print? It is a technique for embedding crisp, high-contrast graphics in the first layer or two of your print. In this case, the entire print is only two layers thick, so the graphics appear on both sides of the…
Notes The pictures were taken over the course of almost a year, so the actual files may differ from the designs shown. The red/white and purple/white cars are the most recent versions. These bodies require proper cable management, as…
Extended cooler bodies for 48mm stepper motors.
Description Embrace tranquility and introspection with "Bodies: Meditative Muse," a minimalist sculpture that embodies the essence of mindfulness and inner peace. This ethereal figure, sculpted in a seated meditative pose, invites you to…
Couldn't find the proper 3mf model I wanted, so had to make 1 of my own. Proper individual bodies and labeled. Colored bodies are .6mm thick for proper color, then rest is black. Printed with .2 nozzle for detail is recommended. .4 should…
Grinch earrings. Proper individual bodies and labels. .2 nozzle HIGHLY recommended for detail. Colored bodies are .6mm. Total depth of 2mm. About 35mm tall.
These are shorter versions of the of the body for the BatteryMag ( http://www.thingiverse.com/thing:1923333 ), that hold 10x and 12x AA's respectively. I've never printed these, but if you do, please post a picture and how they worked.…
The following models are broken up into 3 sets: Small, Medium, and Large. These tools can be used with TinkerCAD to cutout a portion of an existing model, add threads, and provide a cap that can be easily opened and resealed. We've used…
These dual magnet half spheres are an adaptation of my previous half sphere magnet bodies . Instead of room for a single strong magnet, they take two smaller magnets. It's great for less serious attachment needs, or just for fidgeting.…
You can use this forms to the original game.
Split into multiple bodies in the STL for length modification (bolt hole center-to-center - can scale the square profile cross-section). Did the best with what time I had for the least amount of work… Most slicers allow you to…
I made this as I was unable to find an X-Tensioner Body replacement part on Thingiverse though I have needed one for some time. I think this worked out to be a pretty straight forward, drop-in replacement part with no customization needed…
A keychain modeled after the 2023 Ford Ranger. Dimensions: 67,5 x 24 x 2,6 mm The different bodies from the original model were exported as separate files, to more easily allow the use of different colours for the bodies instead of one…
I added some cutouts for coolbodies to the fish eye model
Choose between the fat boy or low rider body that fits perfectly with the QuadroGlide kit. Besides one of these bodies you also need two axels and four wheels from the QuadroGlide model. Happy driving! Example of bearings used for my…
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below. Filaments Used: PLA BambuLab Matte Charcoal Transmission…
Use a BIC pen element for either
These three magnet bodies are designed for any whiteboard or other magnetic surface to help keep you organized. Design features The bodies are 33 mm in diameter, which should pass the small parts test for children under 3 years old…
LED Holder for Pirahna Super-Flux RGB LEDs and Williams/Bally Pop Bumper Bodies Created by Outpost Kodelia ( https://www.thingiverse.com/OutpostKodelia ) License: Creative Commons - Attribution This is designed to fit in the standard…
I recommend printing the bodies on a accurately calibrated printer for best fitment. I print the bodies at .2 layer height with 3 walls but 2 walls works 5 top and bottom layers 5% gyroid infill with 4 layers at 15% gyroid infill with a…
If you have a left over 2040 extrusion you can use these instead of the original 2020 extrusion. Same length as the 2020 = 330mm. You can then use the 2020 extrusion for the gantry instead if you're doing a rail mod for the Ender 3 NG.…
This mod allows the hex accents on the Z Drive bodies to be printed in another color and friction fit in place. Allowing for a clean multicolor part with no filament changes. Print Settings Standard Voron print settings Parts are designed…
funny no trespassing sign/wallart
Choose your fighter! Build your own companion bot with one of these four chassis types, designed to fit an Arduino Nano, screw terminal and either standard or micro servo motors. Part of this set of instructions to build your own…
to conect straws,fold th straw end like a U
Equal parts simple and dumb: For the three other people out there that might want this. This allows a Leica M rangefinder camera (M6 and M11 for sure; but I think all of them) with an attached 75mm APO-Summicron-M lens to sit flush. I…
a pair of handlebodies defined by discrete and continuous changes in elevation Category: Math Art
a pair of concave and convex handlebodies defined by discrete changes in elevation Category: Math Art
100x160mm sign, with a directive from the Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs. You may wish to observe…
I recommend printing the bodies on a accurately calibrated printer for best fitment. I print the bodies at .2 layer height with 3 walls but 2 walls works 5 top and bottom layers 5% gyroid infill with 4 layers at 15% gyroid infill with a…
a pair of concave and convex handlebodies defined by discrete changes in elevation Category: Math Art