322 models
Bento format stadium for Too Many Bones to hold chips and cards during play and facilitate saving between sessions. There are 5 pits designed to hold cards : Unresolved encounter cards (Rencontres) Resolved encounter cards (Passé) Loot…
A simple case to play the awesome little dice game “Knucklebones” from Cult of the Lamb. With support for common 16mm dice as well as smaller 12mm dice, just download the appropriate size and hit print! Printing Print the top case with…
Are you a fan of Knucklebones like me? Here's a great way to carry around the dice and be ready for a game at any time. This compact case features storage for 18 16mm Chessex d6 , a play area on top, and a magnetic lid that does not…
Gusty Bones : Yo-Kai Watch Not AI. Modeld In blender. Rendered In blender
Coin with a cassette and crossbones engraved in it. Uses art from Wikimedia Commons .
Querlenker für den HPI Savage XS Muss mit PETG gedruckt werden HPI Savage XS Wishbones required print with petg
So I did this quick model to fit a 4mm square tube to a Stickybones Fly Rig socket and be able to use a normal winder. Printed in PETG vertically with the base towards the plate. No special settings, the fit will be super tight so be sure…
Massive props to StevenDuvall for laying a quality foundation for my remix effort based on his work Intense and in-depth scientific market search has shown us that 95mm is the optimal length for a 3D printed articulated fish skeleton and…
April 15, 2026 Update : There is a new tray to hold Trover along with all of his skill dice, initiative die, chips, heat-up peg, the relevant tyrant dice, and his bag. I also added a miscellaneous card tray to the top tyrant drawer. You…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Remixed model to fit as an earring. Actually resized it to x=40.00mm (39.97%) y= 14.70mm (39.97%) z=3.60mm (56.87%). Printed with severals types of PLA on a P1P with 0.08mm layer higth (first layer 0.2mm). Had some problems with bed…
These are the bones needed to assemble the dummy 13 Deadpool https://cults3d.com/en/3d-model/art/dummy13-deadpool-by-3dnuevo I ordered them by color, prin with PLA+ or Petg
This is the Living Bones model that I've been working on for the board game, Gloomhaven. I'm still fine tuning the model, but I think that it's gotten to the point where it's printable and so I want to show off my hard work! Speaking of…
I had seen the movie Captain America Civil War with my boys and really like the sinister look about this mask. I was originally going to do a couple for my sons to go paint balling in. But I needed to do a little more research on the eye…
3D printable version of the Knucklebones minigame from "Cult of the Lamb" videogame. I watched the video from Makersmuse, which inspired me to create the board game from scratch with a few improvements / changes. I designed the game to be…
I wanted to make some interesting buttons for Crocs. These were for some of the kids.
I asked my daughter for a trending idea for a Benchy and boy was she right! Set sail with this spooky twist on the classic Benchy. Featuring a skeletal prow and bone accents, this creepy-cute print is perfect for Halloween displays or…
Dry Bones from Super Mario World. If you make it too small the supports are going to be hard to remove from inside the rib cage. Leave room for some needle nose pliers.
A simple pirate skull and crossbone bead for hoodie or Jack Sparrow wig. Printed in PLA, but should be okay in other materials. Prints in approximately 22 mins
Ignite your imagination with a set of dinosaur fossil magnets to use around the home. These magnets feature dinosaurs such as the T-Rex, Stegosaurus, Spinosaurus, plesiosaurus, pterodactyl, brachiosaurus, triceratops, and a…
Introduction: After trying numerous fan shrouds/ducts on my Ender 3 V2 and not being completely satisfied I thought it was time to have a crack at my own. Although still not completely satisfied I've been using for quite a long time now…
Another cool charactor from Marvels Captain America Civil War Movie, Please check the sizing suits your needs, Cheers Jace
UPDATE 8/7/2026: top z distance should be 0.2 not 2! This model represents the bones of the left foot and ankle generated from a computed tomography scan. It is life size so it fits better on a printer like the A1. Each bone is clearly…
from one of the best adventure movies
Read more here: Thing 20: Mr. Bones skeleton puzzle – Widget Weekly Thing 21: Mr. Bones coffin – Widget Weekly I made this model in my early days of learning to 3D model and 3D print. I tried to make it accurate to the original candy, but…
2022-09-25: Added .step and .f3d files. Spooky skull and crossbones cookie cutter. Simple and fast print.
Note #1: For naked Gopro9/10 & GoPro Bones. Longer one might introduce vibration during fast-forward flying or any extreme condition if you print at TPU. Since the mount on these is not in the center of the camera structure. So I printed…
Description: As a part of a self-made tradition: entering the competition with Skeleton themed models! This time was a pretty easy modelling: Already had SVG with the bones silhouette from previous project, so needed to measure a regular…
Keycaps for Mechanical DIY Barebones Keyboard Parts Used: Inland Gaming MK Pro 75% Barebones Keyboard Inland Blue-Black Shimmer Filament Inland Gaming Coiled Cable Kailh Box Autumn Switch Printer Settings: 230°C Nozzle Temp 60°C Bed Temp…
2 logos one with background one with none hollw eyes and nose on each raised so these will be easy to manually change color on scale acording to your needs Edit: originally uploaded some improperly scaled files ..i fixed that sorry for…
I designed this simple skull & crossbones charm to add some personality to your Bogg bag. After having lost several of these charm-type decorations on both Bogg bags as well as on Crocs, I designed this charm to stay securely attached via…
I remixed the original taking some of the bones and adding a cylindrical cutout all the way through so that I could use it for a costume necklace. Print Settings Printer Brand: Creality Printer: Ender-3 Max Resolution: 0.08 Infill: 15%…
Dry bones!!! I articulated his model a bit to be a little interesting, rather than T-posed. If anyone has any ideas for more character models they would like to see please let me know!
Background The Game The game is a relatively simple 2-player dice game. You can read more about the details here: Cult of the Lamb: Knucklebones. Inspiration This is based on the work from Maker's Muse . I wanted a version that was a bit…
While making this project it is highly recommended to desolder the PCB which has the side buttons on it to keep it from rattling inside of the mouse and to make the mouse lighter. This probably needs a quite well calibrated printer. The…
Skeleton model from https://www.thingiverse.com/thing:50174 slightly modified to allow motion. Hand model: couldn't find source. Notify me if you know the original Print Settings Rafts: No Supports: No Infill: Gyroid Category: Biology
Game board inspired from the CotL game Knucklebones.
Halloween bones cutter - perfect for cookies, fondant, playdough, polymer clay
This is my Version of and Insert for my Too Many Bones Collection. It holds everything in 3 Boxes but the Components for Splice and Dice. I have printed everything with my Prusa mini+ but the Gearloc Tray for Riffle. For those of you with…
This model is compatible with the lego system.
Grinny McBones - Too cool to rest in peace
I have gone a little overboard printing out the Giant Lego Skeleton Pirate stuff. When I found the skull and crossbones flag from user EMN I was highly impressed, but little disappointed. There was no flag pole with it because he used a…
-This is a pocket version of the mini game Knuckle Bones from Cult of the Lamb. -You will need at least 17 D6 of 12mm max., you can fit a total of 18 dices. -Print ant 0.2 and whatever infill you want, no supports or anything like that…
This is a remix of the “Dodgy Too Many Bones and Undertow Character Case” by tpancoast found on thingiverse: https://www.thingiverse.com/thing:3985965 The 3 boxes store all non-Gearloc dice and tokens from the base game and expansions 40…
Check out Poison Apple Prints on Patreon for loads more Disney inspired stl's! https://www.patreon.com/PoisonApplePrints & tag me on instagram @poisonappleprints
I had requests for an arm for comparative anatomy purposes and I actually had made one for a colleague, so I'm sharing it now. Remix of the left arm bones made available under CCBY license by user MySegmenter on the NIH3D Print Exchange .…
German: Ich nahm den Anchor - tall ship style - ancre by RoudCach, drehte den Balken um 90° und halbierte das Modell um es besser drucken zu können (das Teil muss also zwei Mal ausgedruckt und miteinander verklebt werden) Dann…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are dice and chip storage trays for the Gearlocs in the board game Too Many Bones. Sliding lids for the trays are available in a separate posting at: https://www.printables.com/model/511136-too-many-bones-gearloc-storage-tray-lids…
In my continuing quest to make a LEGO pirate scene, I modelled up this bad boy. I cheated ever so slightly on the length of the flag to make it fit on my 220 x 220 bed - the flag is 1.6mm short of true scale but it's not noticeable. If…
3d version of the Jolly Roger
Printed from PLA - works without any problems. No need supports
These are sliding lids to accompany the Gearloc storage trays for the board game Too Many Bones. The storage trays have been posted separately at: https://www.printables.com/model/511137-too-many-bones-gearloc-storage-trays. Each Gearloc…
GDMK Heltec v2/v3 BONES case Meshtastic inspired for a single 18650 cell. Visit us: Gendemik.co.uk Newer stl files can be obtained at the link above. Print the fascia as one with supports using LINES. The heltec mount is a tray that…
An anatomy model of the femur that I sculpted in Blender.
This file is part of #Scantober, see the full video here: https://youtu.be/VJ95XVFBNv8 This is a 3D scan of a skull and crossbones Halloween decoration that I resized to use as a necklace, charm, or other piece of jewelry. You might want…
Simple bone, two sizes at once. Print with support :)
These are divider tokens for separating categories of Baddie chips in their storage containers for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each chip has the Baddie Type icon and point count…
Cult of Lamb - Knuckle Bones mini-game Designed: Autodesk Inventor Pro 2023 print in place tolerances:0.3mm 2x 6x3mm magnets required 17x d6 dice (designed round my included d6) [resin print recommended] version 5 - has slightly wider…
The main characters from Too Many Bones. I don't own the rights to the characters, but I decided to throw together the characters as a present for a friend. Made for resin printers. If you make these, I would love to see a make.
Too Many Bones - Day/Progress tracker I don't have the official Adventure Map. So I put together a bunch of files in Blender and created this Day/Progress tracker How to Use The bones at the top function as an arrow to mark the day and…
scalable skull and cross bones
MINIATURES: https://cults3d.com/en/design-collections/MONA_3DStudio/miniatures Instagram profile: https://www.instagram.com/mona_3dstudio?igsh=MW1vbm95a2RjaXV3aQ== Enhance your tabletop experience with this highly detailed ancient tree…
This is a remix of the “Dodgy Too Many Bones and Undertow Character Case” by tpancoast found on thingiverse: https://www.thingiverse.com/thing:3985965 After printing the excelent Dodgy Too Many Bones Character Cases, I wanted some Tyrant…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…
Various buildings from the show The Owl House. Ten buildings which surround the Covention Hall . These are the Book Nook, eight non-descript buildings and a tower. Also included is a gate. Each individual building is 20-40mm long, 15-30mm…
This is my take on a board for Cult of the Lamb's Knucklebones dice minigame. Travel sized and folds in half for easy transport! With optional recesses for magnets and a printed sleeve to prevent your dice from getting lost in your bag.…
knucklebones from the cult of the Lamb with 18 dice
This is 7 different kiwi (bird) leg bones that have been segmented. Category: Animals
These are three new modules for our wooden treasure chest. It contains a pile of skulls, a pile of bones and skulls and three display skulls. You can find the chest, lid and placeholder STLs in Set 1 and other module sets right here:…
Coin with a skull and crossbones engraved in it. Uses art from PublicDomainVectors.org .
Replacement for Saris bike rack bones knob. Model is fine tuned and can be sliced and printed directly.
A pile of skulls and bones made for a diorama.
I needed some Type I samples printed, so I made all 5 types of ASTM tensile test dogbones. Based 100% on the ASTM standards. Not my design. I just made them STLs.
Remix of the encounter trays for Too Many Bones that fit in the front of the Trove Chest. Slightly easier to remove cards from the holders, and still easy to grab a card tray and play. Prints without supports. I included both .scad and…
Want a Commercial License to sell my prints? Join my Patreon as a paid member 😊 https://www.patreon.com/c/Salvadori3DArtworks I’m beyond excited to introduce three new voodoo dolls to the lineup, each bringing their own unique vibe and…
Add some flare to your hoodie or your shoe laces with these beads.
This is a repost of my model from another site . Future updates will be here. This is a character case for Too Many Bones . It was specifically designer for Undertow because other character cases I have tried are too big. This one isn't.…
Simple RIP headstone with a skull and crossbones.
Just for fun to display spooky thing for halloween or for your otherwise macabre sense of decor. Authentic 3d model of a human femur (thigh bone) scaled up and merged into a stable tripod. Doesn’t fold but quite strong considering even at…
SKULL CROSS BONES WALL ART
Sea of Thieves coaster - The Reapers Bones Unearthed Diameter : 100 mm Sous verre Sea of Thieves - Les os de la faucheuse font surface Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Tic Tac Toe portable games. Skull and Bones edition
This is an orbit bones anatomical model. Biomedical model for education, simulation… Created from the BodyParts3D/Anatomography.
Bonesy is here with big hollow eyes and a chubby ribcage—cute and spooky at the same time! Whether as a keychain or a tiny desk mascot, this skeleton is a fast print that brings instant Halloween vibes. Available in both AMS multicolor…
This bold and edgy Skull & Crossbones Vase is the perfect statement piece for any space that thrives on contrast and style. Crafted from smooth, matte black ceramic, it features an intricately sculpted skull with crossbones design on…
My son loves the Hot Wheels car Boneshaker, and grabs every version that he finds. I wanted to print the Hotrod, but I knew that in the back of my mind, I would always regret not remixing it into Boneshaker if I didn't. But, since I'm not…
Dark Beauty - Skull & Bones 3D printable model.
My friends were having trouble frequently losing the finger modules from the Stickybones drawing figure. They were also having trouble sourcing authentic replacements, so they asked if I could print temporary replacements while they wait…
Level up your Knucklebones game with this epic 3D-printed dice case and gameboard! This sleek, compact design features a magnetic closure to keep your dice safe during all your adventures. The lid doubles as a dice rolling tray, making it…
These are divider tokens to separate the new categories of Baddie chips (Break, Krelln, Mech) found in the expansions Undertow and Unbreakable for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each…
Knucklebones is fast and a simple game to learn. This is a simple take on a board and dice tray that's easy to travel with and teach other people who want to play. This is a plain board designed to be easily printed, with minimal post…
My take on Bonesplitter is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC. Want to access…
This was made to help to protect your GoPro Hero10 Bones from crashes. Print it on TPU for best results. Don't forget to read the license. It's NOT for commercial use! Be adviced! Category: Hobby
This is a modular wooden pirate treasure chest. This set incudes an empty treasure chest, a lid, a pirate treasure module and a few spacer elements for adjusting the chest's fill level. (Hint: The spacer elements can easily be replaced by…
Do you use the Milwaukee Packout System for your furry friends (not actual furries - oh god, what have I done)? Do you hate digging through the stack of packout gear searching for which one holds the correct tools? Look no further! I…
