43 models
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
Print approx. €5.38–€6.58 excl. taxPreliminary estimate for PETGSource material: PET
Bookbinding clamp to use on wetted cardboard or chipboard to make even curves for the spine of a hardcover book. No supports needed to print, does require epoxy/glue to connect the parts, or can plastic weld with a soldering iron. To use,…
Print approx. €7.10–€8.67 excl. taxPreliminary estimate for PETGSource material: PET
If you have a 3D printer and decide you want to give bookbinding a go, here are a set of tools to get you started! Included are spacing guides for cutting your book cloth to size around our book boards (Also function as a straight edge,…
A set of the most common bookbinding spacers used for off-set cutting of bookcloth and book board when binding or re-covering hardback books. Dimensions: height 5mm, length 254mm, widths are 20mm, 10mm, 7mm, 5mm, & 3mm. Spacers have…
I made a corner cutter jig for my bookbinding mom. It will accept board material up to 1/8" thick, and sets the cut edge 1/8" from the corner. It cuts the corners precisely and aids in folding cover material over the hard inner board. I…
Leiste zur Bücher binden die ich für meine Frau gemacht habe. 30cm lang / 1cm Lochabstand. ---------------------------------------------------------------------------------------------------------- Bookbinding Awl Guide I made for my Wife…
This is a jig to help you punch folios (sets of paper that are to be bound together into a book). The included jig is meant for paper 200mm wide (before trimming), but I've also included the fusion 360 file if you want to edit it yourself…
An “all in one” bookbinding jig for getting your right angles, gap distances, and borders set up quickly. I have increased the number of walls to help keep everything straight and prevent issues with the miter guide. Miter distance is 3…
This is a jig for punching holes into the pre-folded pages for bookbinding. The parts are currently made for a 2 mm awl and 10/12/16/20mm bookbinding tape / bookbinding band. The top parts have holes for a different number of tapes/bands.…
This is a Piercing Cradle for a 210mm (short side of a piece of A4 paper). It is used for properly aligning paper to pierce through it with an awl to make signatures (A5 sized) for sewing together when bookbinding. They are quite…
A handy little wall-mounted organizer for storing essential bookbinding tools up and off of your work surface. Pockets on the top of the organizer for spacer sticks and your favorite pen/pencil. A pocket on the left-hand side for a…
Punching cradle side wall can be combined with plywood 9mm wide x 4mm thick, or with 3d printed sides to form a full punching cradle. The gap is 2mm wide. I printed it in PETG and it works well. This model is slightly different from the…
A quick remix of the corner alignment tool that Virginia Lomonaco made. My girlfriend really liked the tool, but could accidentally damage the paper edges so I added a relief to help prevent that.
Jig for punching hole in book signatures for binding.
What is it A simple awl guide for sewing thick fabrics. While trying to sew industrial felt, I found it difficult to punch holes that are evenly spaced, especially when the fabric is folded over itself. This is a small tool for evenly…
BookBinding Trimming Plough ... You'll need to supply your own: 100mm Kebab Slicer Blade x 1: https://www.amazon.com E6000 Glue x 1: https://www.amazon.com After printing, glue the blade to the "Star Core" -- the cutout in the blade…
This is a bookbinding awl guide ruler with 10mm spacing. Fits the Prusa Mini
Corner cutting template for bookbinding, with holes for fingers.
An “all in one” bookbinding jig for getting consistent gaps between bookboards, bookcloth gap, and corners. This version has Imperial measurements with a miter gap of about 1/8" and a gap guide of about 3/16". I have included in the print…
I made these tools for a bookbinding project. The corner piece can be of use to align the paper sheets. I added a piece of cardboard between pieces A and B (as seen in the photos) although it is not necessary.
Measurements: Length of 254mm, Width of 16mm, Height of 5mm. An addition to the previous spacer set I made for my wife. She found this to work well for determining the best distance for her when measuring the desired overhang she likes…
Punching cradle for bookbinding. Made in two parts to be compatible with A5 and A4 magazines. If you need the A4 version, you must print all four pieces and join them with an M10 threaded rod. Cuna de punzonado para encuadernación.…
Fits inside the 8.5" cradle - Available at - https://www.thingiverse.com/thing:3766352 Designed for A4 paper folded to A5. Has spacing for awl positioned every 20mm with a border of 15mm at each end. I am using this where I cut 5mm off of…
I made a paper hole puncher, Applicable to thicknesses of A4 paper and below. Just one piece of paper can be operated on, not multiple ones together, After all, It is not a metal blade. In addition, I made various styles of Bookbinding.…
Single and split versions for small sized print beds.
This is a simple guide I use for bookbinding. It has a centimeter scale and special slots for convenient hole punching with an awl before sewing the book block. It has a built-in stop on the left side for easy alignment with the paper. It…
This is a distance template for bookbinding with 20mm hole distance and 20mm width.
These are used to measure the hinge width of a book whilst making a book cover. We have 3mm, 7mm, and 12mm spacers.
Hi Bookworms :P This is a simple Clamp for Bookbinding to hold your Papers in Place. The Corner is open for cuttung the Corners if you want or check if there are aligned. Its a realy helpfull toll for the Bookbinding process. IMPORTANT:…
A friend had something like this (two paint brushes taped to some boards), but it wasn't quite what they wanted, so I designed this for them. It is used for making the little indent near the spine on books. To use it just put it on the…
A friend had a tool like this, but they wanted it longer, so I decided to make it for them. It is 9mm wide and 203mm(8 in.) long. If you have any other sizes you want I can try to make them. I think this tool is for spacing the boards…
Cut out most of the core material and just kept the small 2.5mm holes at the end. This way larger awls that wouldn't fit the og can now be used. Bottom of craddle is unchanged and only uploaded here for convenience, you can also just use…
A set of Squares for Bookbinding, one at 90 degrees and one with 10mm radious
NOTE: This model only includes the toolhead, not a dedicated handle There are several historical methods for backing/rounding during the bookbinding process, such as backing hammers. This tool head mimics existing "Backing Tools" found…
I noticed there are no free models for bookbinding that allow us to mark the corner position for punching holes. This is based on a corner cutter guide made by Hanselcj.
To scratch the back of the covers before placing the cardboard. Guides, rulers. Print Settings Printer: Sethi Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: Any PLA Any Notes: 30cm x 30cm table Category: DIY
You can see this video: https://www.youtube.com/watch?v=9O4kFTOEh6k&t "Make your own Moleskine"... Print Settings Printer: Sethi 3D Rafts: No Supports: No Resolution: 0.3 Infill: 20% Notes: 2mm walls Category: Hand Tools
Cut out most of the core material and just kept the small 2.5mm holes at the end. This way larger awls that wouldn't fit the og can now be used. Bottom of craddle is unchanged and only uploaded here for convenience, you can also just use…
Punching cradle for bookbinding. Made in two parts to be compatible with A5 and A4 magazines. If you need the A4 version, you must print all four pieces and join them with an M10 threaded rod. Cuna de punzonado para encuadernación.…
To scratch the back of the covers before placing the cardboard. Guides, rulers. Print Settings Printer: Sethi Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: Any PLA Any Notes: 30cm x 30cm table Category: DIY
You can see this video: https://www.youtube.com/watch?v=9O4kFTOEh6k&t "Make your own Moleskine"... Print Settings Printer: Sethi 3D Rafts: No Supports: No Resolution: 0.3 Infill: 20% Notes: 2mm walls Category: Hand Tools
