Search results: bora

Sort order

314 models

Elaborately Carved Phallic Effigy : Norse

Section 3: Catalogue of Significant Artifacts from Sector Ulysses, Site 23 3.7 Artifact VN-07-SU-23: Elaborately Carved Phallic Effigy Recovery Context: Artifact VN-07-SU-23 was recovered from Stratum III-b within Sector Ulysses, Site 23.…

Downloads
1,588
Likes
43
Rating
0
P
PrintablesMakeroni

cable holder for 20 laboratory and test cables

cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…

Downloads
599
Likes
61
Rating
5
P
PrintablesToots

Double P-top Bora Centipede

It' a Double P-top for Bora Centipede.

Downloads
319
Likes
37
Rating
5
P
PrintablesKamil

Bora Centipede Parametric Risers

These are scalable/parametric, hardware-compatible risers for Bora Centipede work stands. Bora sells 6" high risers, making the stands 36" high. However, if you use a sheet of plywood or a table top for the work stands, the working height…

Downloads
251
Likes
48
Rating
5
P
PrintablesKikeMaker

Molde para elaboración de arepas

Se imprimen tres partes por separado: base, asa o manija y tapa. Luego de imprimirlas se debe pegar el asa o manija con la tapa. NO requiere soportes. Fácil para limpieza después de su uso.

Downloads
177
Likes
16
Rating
5
P
PrintablesSarpn

Aperture Laboratories Key ring 4 colors

Aperture Laboratories key ring. Use a layer height of 0.15mm Add a change of color in layers: 16, 18, 19, 20. Color goes in this order: -Black -White -Blue -Orange Printed on a Prusa mk3s+

Downloads
64
Likes
5
Rating
5
P
PrintablesDirk

Standart taper joint 29/32 chemical laboratory

This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…

Downloads
35
Likes
4
Rating
0
P
PrintablesFlo

Phone Holder for Golf 4/Bora

I was annoyed by all cheap phone holders on the market so I just kept placing my phone below the radio. With the cover of the ashtray open, the phone kept slipping off at the bottom. With the cover open, it fell over at the top when…

Downloads
34
Likes
2
Rating
0
P
PrintablesEngineer

USB HUB for laboratory power supply

USB HUB Print settings: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES Be careful with electronic parts! I'm not responsible for what you do!

Downloads
21
Likes
4
Rating
0
P
PrintablesJrmaker59

coffret alimentation laboratoire DIY

J'ai créer un coffret pour me faire une alimentation variable DIY l'installation électrique est composée d'une alimentation 220v vers 24v poussée a 30v Pour gérer le 0v/30v je suis passé par un DC/DC bulk variable trouvé sur aliexpress…

Downloads
11
Likes
1
Rating
0

Identifikační podložky do chemické laboratoře

Žáci vymodelují a vytisknou sadu identifikačních podložek pro snazší orientaci při práci v chemické laboratoři.

Downloads
3
Likes
0
Rating
0
P
Printablesvsaggiomo

Ultimate Laboratory Bench Organizer

Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…

Downloads
2,369
Likes
1,217
Rating
5
P
PrintablesItzAsila

Arduino Uno Case w/ Breadborad Insert

This is a remix of Arduino Case by 3DP . I've added a button to access the reset switch, removed excess material to make it slightly thinner, added a groove between the top case and lid to prevent any possible wobble, widen the tolerance…

Downloads
2,273
Likes
611
Rating
4.97
P
PrintablesWilko_SLO

Laboratory Tongs (Print in Place)

Print Z=0,2 perimeter=5 infill=50

Downloads
2,136
Likes
279
Rating
4
P
PrintablesDaniel

Portal Aperture Laboratories Logo - Wall Deco

Aperture Science Laboratories – We innovate science! I like the overall aesthetics of the Portal games a lot. So, to fill a blank spot on a wall, why not use an oversized Aperture Labs logo? The logo This print represents the Aperture…

Downloads
730
Likes
174
Rating
4.88

laboratory power supply 48v 6A (XY6020L)

RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…

Downloads
710
Likes
79
Rating
5
P
PrintablesPlants X Tech

COBLE - Collection Of Bespoke Laboratory Equipment

The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…

Downloads
708
Likes
240
Rating
4
P
PrintablesScientia7

DIY laboratory glove box

I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…

Downloads
473
Likes
238
Rating
0
P
PrintablesSlanjonok

GAZ 66 - KUNG, Workshop/Laboratory truck (1-160)

Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…

Downloads
402
Likes
42
Rating
0
P
Printables3DLada

Portal Aperture Laboratories Keycap

Portal Aperture Laboratories Keycap printed with White and Black

Downloads
399
Likes
90
Rating
4.57
P
Printablesthe freewheeler

BORA Centipede | Threaded Riser Extension

6" Threaded Riser Extension for BORA's Centipede collapsible work stand system. Threads directly to work stand and raises worksurface from 30" to a more comfortable 36". Extension is compatible with factory attachments and fittings. You…

Downloads
371
Likes
81
Rating
5
P
PrintablesRick

Bora Centipede X-Cup

This is a 2x4 X-Cup bracket for the Bora Centipede. It comes in two parts that are easily assembled with a few light taps from a hammer or a mallet. If you're concerned that the post may back out, add a little bit of CA Glue (Superglue)…

Downloads
344
Likes
57
Rating
4.5
P
Printablesthe freewheeler

BORA Centipede | Thin Hex Nut (M14x2.0)

This nut matches the spec used on Bora's Centipede expandable workbench system. Standard nuts are too tall and wide to fit with their 'p-top' and riser accessories. It's unfortunate that Bora makes it this difficult to replace a small,…

Downloads
325
Likes
36
Rating
5
P
PrintablesPeter H

DISPOSABLE LABORATORY FUNNELS FULLY PARAMETRIC VASE MODE

OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…

Downloads
308
Likes
92
Rating
5
P
PrintablesClay2F

Motorhaubenöffner VW Bora/Golf/Jetta MK4

Ersatzteil für OEM nummer 1J0823593C gedruckt in 0,15mm layerhöhe 31% infill auf einem i3 Mega S

Downloads
299
Likes
48
Rating
5

laboratory clamp 90°

This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…

Downloads
298
Likes
74
Rating
5
P
PrintablesHAmitySandwitch

Aperture Laboratories Stencil

A stencil of the Aperture logo from the Portal games designed to be used with fabric paint for my Chell cosplay

Downloads
298
Likes
86
Rating
5
P
PrintablesSebr

Alimentation laboratoire ATX

PC ATX low power lab power supply. Printing without support in 0.20 or 0.15 For the screws: 4x M3 of 5mm 4x 20mm wood 6x m2 4x molded nuts Electronic part: Voltage Regulator :…

Downloads
295
Likes
73
Rating
5
P
PrintablesAkshay

Open Source Laboratory Rocker / Mixer / Shaker (Lab Rocker)

Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…

Downloads
266
Likes
150
Rating
5
P
Printableseurad

Dremel laboratory centrifuge

This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…

Downloads
248
Likes
161
Rating
0
P
PrintablesOpen-Laboratory

Laboratory Stand clip 8mm / Laborstativ - Stativklammer 8 mm - 25mm

Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).

Downloads
242
Likes
44
Rating
5
P
PrintablesApe5Hit

Dialysis Clamp (Laboratory)

Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…

Downloads
241
Likes
14
Rating
0
P
PrintablesJeff Hauser

Aperture Laboratories Extruder (NEMA) Visualizer

I designed this extruder visualizer based off the logo for Aperture Labs from the video game Portal for my shiny new Prusa MK3. I didn't want to deal with support material, so it lays completely flat on the print bed. In order to glue the…

Downloads
238
Likes
42
Rating
5
P
PrintablesIsaac

Keychain SCP Secret Laboratory/Llavero SCP Secret Laboratory

Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.

Downloads
217
Likes
41
Rating
5
P
Printablespaulengel

Bora Centipede Top with Hold Down Dogs and Sheet Connectors

I break down sheet goods with a track saw on a Bora Centipede using a pocket-holed 2X4 frame, clamped on the Centipede, with a foam board on top. The 2X4 frame is unwieldy and difficult to clamp down. When I looked at the Bora top, I had…

Downloads
203
Likes
43
Rating
4.5
P
Printablesthall72
Downloads
200
Likes
39
Rating
5
P
PrintablesZwapz

Adjustable Regulated Laboratory Power Supply SK60 SK120

A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…

Downloads
199
Likes
35
Rating
0
P
PrintablesGlooba

Bora Double P-Top

I modeled this to allow me to make mounting dual tops side by side easier. I did not add the 4 slots to use the hanger accessories. If there is a desire I can add them in. I printed in PLA with the top surface down using some supports on…

Downloads
199
Likes
25
Rating
5
P
PrintablesXkonti

BORA centipede sheet holders

Simple corner and straight adapters that hold a 4x8ft sheet of material in place, helping in keeping the table square. It possibly works on smaller tables with smaller sheets, but it has not been tested yet. No supports needed. Just…

Downloads
198
Likes
33
Rating
0
P
Printablesthall72
Downloads
188
Likes
33
Rating
0
P
PrintablesPaaartiik

Car radio frame for Volkswagen Golf 4, Bora or Jetta MK4

It fits specifically for the Blaupunkt Palma 190 BT radio. The internal dimensions of the frame are 178 x 100 mm. Printed with black PETG on Bambu Lab P1S (0.08mm Extra Fine @BBL X1C preset). Infill - 20% Gyroid Wall Loop (Number of…

Downloads
187
Likes
9
Rating
0
P
PrintablesTinyMtn

Aconcagua, Chimborazo, Huascarán, Ojos del Salado 3D Maps

TinyMtn Free Pack 10 - Andes This is a package with sets of 3D model files for four notable mountains in the Andes. Aconcagua, 6962 m / 22,841 ft Volcán Chimborazo, 6267 m / 20,561 ft Nevado Huascarán, 6768 m / 22,205 ft Ojos del Salado,…

Downloads
184
Likes
23
Rating
5
P
PrintablesMatthew B

250 mL Laboratory Flask Holder

250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…

Downloads
181
Likes
57
Rating
0
P
PrintablesJoe

Dexter from Dexter's Laboratory

Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…

Downloads
181
Likes
27
Rating
5
P
PrintablesNovator

RD RK6006 / DPS5020 and compatible DC-DC laboratory power supply case

Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.

Downloads
171
Likes
21
Rating
5
P
Printablesgebirgshang

Volkswagen Bora Kit Card

Print 0.2mm layer height. No supports are needed. 10% infill.

Downloads
166
Likes
15
Rating
5

Laboratory sample holder, vacutainer vials holder, blood sample stand

Holder for 13 vacutainer vials, easy print, no support needed

Downloads
166
Likes
47
Rating
0
P
Printablesjakub

The Ultimate Laboratory Organizer!

The ultimate STACKABLE laboratory organizer! Simple to print, customisable, .step and .shapr file incuded. Designed in Shapr3D. Print with PLA with 0% infill. Hope it works and helps! Happy printing, thanks for downloading

Downloads
161
Likes
75
Rating
0
P
Printablesthe freewheeler

BORA Centipede | P-Cap Painting Standoff

Painting standoff (or painter's pyramid/cone) insert for BORA Centipede system. Fits in to factory "P-Cap." Its function is pretty straight-forward. Just set the piece you are painting directly on to the Centipede frame and go to town.…

Downloads
159
Likes
35
Rating
5
P
PrintablesDroopas

Glass screw cap - laboratory GL18

A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering

Downloads
155
Likes
13
Rating
5
P

Business Cardholder, dental, laboratory, Atlas, Sphere

Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…

Downloads
155
Likes
24
Rating
5
P
Printablesmikrom

Maker Robot for RoboRally

Maker robot as RoboRally figure Edit online: https://www.tinkercad.com/things/1macLwE30a5

Downloads
154
Likes
9
Rating
4
P
PrintablesToFe

Fun science: Universal laboratory stand

Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…

Downloads
153
Likes
60
Rating
0
P
PrintablesRogue_72

Laboratory Magnetic Beads Separation kit

When handling samples obtained from difficult (environmental) matrices (e.g. manure, dirty surface swabs, or water), Nucleic acid extraction and purification often becomes problematic. Scaling up during epidemics or environmental…

Downloads
151
Likes
46
Rating
0
P
Printablesmikrom

Dalek for RoboRally

just used the figure as RoboRally figure Edit online: https://www.tinkercad.com/things/bbvRETUbozR

Downloads
147
Likes
16
Rating
4.33
P
PrintablesJoe

Dee Dee from Dexter's Laboratory

Dee Dee from Dexter's Laboratory

Downloads
146
Likes
19
Rating
0
P
Printablesjakub

GRIDFINITY laboratory organizer

GRIDFINITY laboratory organizer. 8 types. Use also this or other gridfinity grid base. Check also my other design, stackable laboratory organizer . Hope it helps, and happy printing!

Downloads
142
Likes
52
Rating
0
P
PrintablesMasCreations

Laboratory Centrifuge

Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.

Downloads
141
Likes
61
Rating
0
P
PrintablesRealizzaIdee

Laboratory Vial Holders rack: a practical solution

I designed these two vial holders to maximize practicality and efficiency in the lab. I currently use them, and so do some of my colleagues. These holders can accommodate various standard vials: The larger holder can accommodate up to…

Downloads
139
Likes
25
Rating
0
P

Hanging Rack for Bora Edge Clamp Circular Saw Guide

I really liked the “no hardware required design” I saw from JeremyKMac , so I remixed it for a Bora Edge Clamp Saw Guide. I printed on Prusa Mini+ in PetG with no supports just fine. Hope this is useful for those who have the thinner Bora…

Downloads
136
Likes
34
Rating
5
P
Printablesprz3d

VW Bora/mk4 Jetta headlight cover

Print with something a bit more heat resistant than pla (mine is pte-g) and put D profile window seal trim in it and it will fit your car.

Downloads
131
Likes
19
Rating
0
P
PrintablesUhrensohn

Holder for laboratory cable

A wall mount for measuring and laboratory cables. The distance between the arms is 4 mm. Easy to print!

Downloads
129
Likes
15
Rating
0
P
PrintablesDeedikjepijn

Traxxas Slash 4X4 Ultimate Rc car stand (F1TENTH | ROBORACER Race)

A car stand for the Slash 4X4 Ultimate rc car created by the F1NESSE team from the Netherlands. Not sure if there are any other traxxas vehicles compatible

Downloads
125
Likes
14
Rating
0
P
PrintablesDalama

Laboratory Peristaltic Pump

This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…

Downloads
124
Likes
39
Rating
0
P
PrintablesJoe

Dexter from Dexter's Laboratory

Dexter from Dexter's Laboratory

Downloads
123
Likes
27
Rating
0
P
PrintablesLloyd Keays

Bora Centipede: The Affordable Workbench Top Setup - Connectors and More! (no router needed)

Printed Parts Assembly Attach the Base Screw : Begin by screwing in the plastic screw underneath the small base section. This extra support is here solely to provide more strength. Select the Right Peg Size : Choose the pin sizes that…

Downloads
122
Likes
28
Rating
5
P
Printablesthe freewheeler

BORA Centipede | Threaded P-Cap

Riser Extension P-Cap for BORA's Centipede collapsible work stand system. Design and layout matches factory dimensions, and improves upon it. This "P-Cap" design threads on directly, without the need for an additional nut or tools to…

Downloads
120
Likes
29
Rating
0
P
PrintablesYa Boi Rema

Mk4 Golf/Bora/Jetta flame defrost vent

For the dash vents. I suggest printing it side up with supports since the support side sits inside the dash anyway. Mirror it for the opposite side.

Downloads
118
Likes
12
Rating
0
P
PrintablesBGeorgeFr

Wall hanger for Bora NGX Clamping Straight Edge Guide

A simple wall hanger/hook for the Bora NGX Clamping Straight Edge Guide. Prints on the side, I recommend using ASA/PETG or another filament with a good amount of flex.

Downloads
118
Likes
17
Rating
5
P
Printablesthe freewheeler

BORA Centipede | Knurled P-Cap Insert

Knurled insert for BORA Centipede system. Fits in to factory "P-Cap" to provide a gripping surface for worktop. I've seen many complaints about the P-Cap being slippery, so it's difficult to keep worktop from sliding around. This little…

Downloads
117
Likes
33
Rating
0
P
PrintablesLucian Brandus

DC-DC regulated laboratory power supply and meter

DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.

Downloads
113
Likes
17
Rating
5
P
Printablesadamhogle

Bora Wood Rack Parts

I bought a few of the Bora Wood Rack kits from my local hardware store to store lumber in my garage. Unfortunately, I lost some of the wall spacers between purchase and installation, so I quickly modeled one so I could make replacements.…

Downloads
112
Likes
18
Rating
3
P
Printablesthe freewheeler

BORA Centipede | Threaded Extension Cap

Riser Extension Cap for BORA's Centipede collapsible work stand system. I have seen a lot of complaints about the BORA P-Cap being too slippery to keep table top in place, so I have included both a SMOOTH and a KNURLED design. Rubber…

Downloads
112
Likes
37
Rating
0
P
PrintablesSpater

Multi-tubes rack for 50mL, 15mL and 1.5mL laboratory tubes

Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…

Downloads
111
Likes
18
Rating
0
P
PrintablesJozsef Beres

VW BORA HUB CENTERING RING 57.1-63

VW BORA HUB CENTERING RING 57.1-63 GOOD

Downloads
111
Likes
8
Rating
0
P
Printablespfuscher666

Breadboard holder with laboratory plugs

Breadboard holder with laboratory plugs Breadboard:…

Downloads
109
Likes
43
Rating
0
P
PrintablesWayneC

Panel Supports for Bora Centipede

I wanted extra panel supports for my Bora Centipede work table, so I created three versions. In the pics, you can see the original Bora support along side the printed version. There are 3 versions, one with a flat top surface, one with…

Downloads
107
Likes
27
Rating
0
P
PrintablesAnton Batrakov

Monument to the laboratory mouse (mouse knits DNA)

The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…

Downloads
104
Likes
7
Rating
0
P
Printableshernangarage

Speaker Ring Adapter for VW GOLF MK4 / VW BORA / VW Jetta 6in Speakers

Ring adapter for 4 door speakers. Door bots with 5mm@10mm. (158mm standard door fixed bolts) Speakers fixed with drywall 5/8 (143mm diameter) Standard fix for 6in speakers.(not 6.25 or 6.5mm) ... Adaptador para VW GOLF, Jetta, Bora para…

Downloads
102
Likes
9
Rating
0

laboratory clamp parallel

This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…

Downloads
98
Likes
41
Rating
0
P
PrintablesOpen-Laboratory

Laboratory Stand - Base Plate / Laborstativ - Stativplatte 8 mm

Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…

Downloads
98
Likes
17
Rating
0
P
PrintablesCMcDonald04

Aperture Laboratories Creality K1 USB Port Cover

Aperture Laboratories Plate that covers the USB port on the Creality K1.

Downloads
98
Likes
20
Rating
0
P
PrintablesSnuff Klko

Borat funko POP!

Print & acrylic draw!

Downloads
92
Likes
25
Rating
0
P
PrintablesJuráš Ch.

Laboratory tubes dryer

PLA, infill 15% no support For one base, you need 21 sticks. Stick are printed horizontaly for endurence. Tolerance: holes are 3.3 mm width, stick have 3 mm

Downloads
92
Likes
26
Rating
0
P
PrintablesIngenuity

Laboratory Vial Tube Holder

Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…

Downloads
91
Likes
23
Rating
0
P
PrintablesModel Magic

Rock Bands - Bon Jovi - Richie Sambora

Rock Bands - Bon Jovi - Richie Sambora 3D printable model.

Downloads
85
Likes
17
Rating
0
P
Printablesoli001251

Bora Pure Einströmdüse

Dunstabzugabdeckung für Bora Pure Induktions-Kochfeld. Kompatibel mit Bora S-Pure, M-Pure, Pure empfolenes Filament: ABS

Downloads
84
Likes
3
Rating
0
P
PrintablesMachenna56k

"Small Deborah" Cupcakes Earrings

A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…

Downloads
84
Likes
60
Rating
0
P
Printablesthe freewheeler

BORA NGX/WTX | Edge Guide | Connector

Connector for BORA NGX/WTX Edge Guide track system. Manually drill out third hole, as alignment may vary This is a work in progress, as I am working on a series of designs and adapters for BORA NGX & WTX Clamp-Edge system compatibility.

Downloads
84
Likes
16
Rating
0
P
PrintablesBecker Thorne

HAWKINS NATIONAL LABORATORY SIGN

HAWKINS NATIONAL LABORATORY SIGN Category: Signs & Logos

Downloads
83
Likes
14
Rating
0
P
Printablesmartin85

Bora/Jetta side window vent cover

Vent cover with lamels, fits like glove. Supports only required for side spike triagle holders. Looks great and works wiVent cover with lamels, fits like glove. Supports only required for side spike triagle holders. Looks great and works…

Downloads
78
Likes
14
Rating
0
P
PrintablesMojoRuns

Alimentation laboratoire ATX (Lab/Bench Power Supply based on ATX) - Dual USB Facade Update.

Hi All, The first project I built back in 1990 when I graduated with a BS in Comp-Eng was a power supply. It has served me well all these years, but it was limited. So I decided on a new 3D printed update. I like Sebr's power supply…

Downloads
78
Likes
20
Rating
0
P
PrintablesEd Yu

Bora Centipede P-Top Various Shapes (Double, Triple, Quad, Starfish)

Various shapes of the P-Top. Fits well enough with my settings using ABS @ 0.6nozzle/0.3mm LH. Did not optimize to save filament so it does use a good chunk of material. Recommend using a brim and printing in orientation in the…

Downloads
76
Likes
13
Rating
5
P
Printablesben

front mount dual USB Type A Female Breakout borads

front mount 2 usb breakout boards . one model is flush the other protrudes 3mm printed with 3 walls and 15% infill i recommend 5 walls for the models with no heat-sets to get stronger threads

Downloads
73
Likes
3
Rating
0
P
PrintablesFrinn

MULA, a DIY 3D-printed pipetting robot, enabling accurate liquid handling for chemistry and biology laboratories

Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…

Downloads
72
Likes
23
Rating
0
P
Printablesbyrhn

Universal Multi-Size Laboratory Tube Organizer

Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…

Downloads
72
Likes
12
Rating
0
P
Printablesthall72

Lego Compatible (11437.dat) Minifig Helmet Ornament Horn Elaborate

This model is compatible with the lego system.

Downloads
72
Likes
16
Rating
0
P
Printablesduesentrieb

Laboratory Glassware Crossover NS14 / GL14

Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…

Downloads
71
Likes
5
Rating
0
P
PrintablesDrBenC

Laboratory Vial Organiser Quick Print (13mm, 19mm, 26mm)

A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…

Downloads
70
Likes
22
Rating
0
P
PrintablesHráďa

Laboratory test glass tube

Just a normal chemical laboratory glass tube, but with the screw.

Downloads
69
Likes
5
Rating
5