9,084 models
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant
A rope spirals around to create a small bowl. This is part of my Rope Series. You can view all of my Rope Series models in this collection . Print Settings No special settings needed Buy Me A Coffee The following filaments were used in…
Print approx. €8.41–€10.27 excl. taxPreliminary estimate for one variant
It's a fully printed, pocket size crossbow Have fun! don't hurt anyone How to make it print the file kitcard_crossbow.stl seperate all the parts (maybe using a small wire cutter) take the part with the R and put the pins in connect the…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Edit: Variations added due to comments and…
Print approx. €10.42–€12.73 excl. taxPreliminary estimate for one variant
A fun mini tabletop bowling game designed for quick and competitive play! 🎳 Flick the ball from the built-in guide and aim for the perfect strike 📐 Includes a pin-placement guide to reset all pins with perfect spacing 🟦 Side gutters catch…
Print approx. €8.34–€10.19 excl. taxPreliminary estimate for one variant
My mum loves to knit, but says that her yarn rolls around when she pulls on the string, so i designed these cute bowls, I hope you like them :D keep in mind that i printed my bowl with 0.35 layer height with a 0.6mm diameter nozzle. The…
Print approx. €15.72–€19.22 excl. taxPreliminary estimate for one variant
Really cute rabbit bowl for snacks or little things. Comes as a friend with my previous Cute cat bowl Features: No support is needed. Easy geometry 10% Infill recommended. Fully scalable. Two versions. With and without a tail. Filaments…
Print approx. €7.52–€9.19 excl. taxPreliminary estimate for one variant
A cute little bow for your hair! Just loop a hair-tie through the back, slip it through itself for a knot, and it's ready to wear! Includes two versions. One with ribbon tails and one without. Printing recommendations: 4mm Nozzle, .2mm…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
Description Just a small bowl I designed as an experiment. Turned out looking pretty cool. The bowl is almost 5 inches across. I imagine it would be pretty easy to scale this up or down. Files I included 2 .gcode files, one is for a 1…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Overview Introducing the Tetrahedrinsanity Bowl! This patterned bowl features dozens of tetrahedron facets which look really cool when printed in rainbow or silk filaments. Printing I printed using MatterHackers silky rainbow PLA on the…
Print approx. €10.68–€13.06 excl. taxPreliminary estimate for one variant
Mini-Bow Shoot far with this mini-bow Assembly Cut a rubber band in half Tide one end of the rubber band into the selected place on the bow Do the same for the other end of the rubber bend and the other selected place on the bow Cut one…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Deutsch (English below) Wassernapf mit PET-Gewinde für PET-Flaschen. Dient dazu, einen größeren Wasservorrat zu haben. Viel Spaß beim Drucken und bewertet gerne… Drucker: Original MK3S+ Filament: NOYES PLA+ Grau…
Print approx. €16.97–€20.75 excl. taxPreliminary estimate for one variant
Modeled on a name brand pottery rib, this is the ultimate tool for shaping nice bowls. Make sure to print with support or the edge won't print properly.
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
This model was inspired by https://www.thingiverse.com/thing:1603188 Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.3 mm Infill: 10 % Ironing: Top layer
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Print approx. €3.03–€3.71 excl. taxPreliminary estimate for PETGSource material: PET
I used PETG for more durability (washing in the dishwasher) I used a fuzzy effect on the surface of the main bowl Scarf seam is used in g-code The size of the bowl is 190mm x 120mm UPDATE 3/1/25 Added stl file of simple upper bowl lid.
Print approx. €6.99–€8.55 excl. taxPreliminary estimate for PETGSource material: PET
Designed to delight knitters and crocheters alike, this dual-compartment yarn bowl features a built-in toolbox for storing hooks, needles, and accessories. Inspired by my wife's crafting needs, it keeps yarn organized and tools within…
Print approx. €20.77–€25.38 excl. taxPreliminary estimate for one variant
The inner diameter of the bowl is 130mm, the diameter of the shell hole is 30mm
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
Easy to make a cute Clouds and Rainbow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
Print approx. €10.92–€13.34 excl. taxPreliminary estimate for PETGSource material: PET
A slow feed maze bowl for pets. scale to any size Print in food safe PETG!
Print approx. €18.33–€22.40 excl. taxPreliminary estimate for PETGSource material: PET
Blood Bowl 2025 rounded tokens "Hey Bob!" "Hey Jim! Looks like we've got some fresh tokens on the pitch today — nicely rounded, easy to spot, and ready for all the chaos Blood Bowl 2025 can throw at them!" no supports needed. no brim…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
An easy-fit dice tray that goes into a double slot in the Games Workshop carrying cases. Fits 1x D16, 1x D8 and 5x D6, which is the standard dice set you get when you buy Blood Bowl dice from Games Workshop. The dice slots have a tiny…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Add a hole to NamedJohnny bowser key in order to hang it in a key chain. Credits Bowser key by NamedJohnny (model no longer online)
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This 3D printable keychain design brings back the beloved Tupperware Wonder Bowl in a miniature keychain form. The design is accurate and detailed, featuring the bowl's signature shape and lid. Print it in your favourite colour or…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Bowser in a santa suit and a basket of gifts.
Print approx. €24.51–€29.95 excl. taxPreliminary estimate for one variant
Easy to print.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Berated for placing my bow on the grass, and after purchasing my first ILF bow, I decided to create a stand to hold my bow whilst fetching my fletchings. Here is a simple 2 hour print that holds your bow off the grass thus providing you…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
As we edge into October, be sure to spice up you house with some spooky, low-poly creations! I have created a low-poly skull bowl! It is great for trick or treaters, but it can also be a great office sculpture+organizer! Be sure to give…
Print approx. €8.29–€10.13 excl. taxPreliminary estimate for one variant
2 Versions!
Print approx. €10.52–€12.86 excl. taxPreliminary estimate for one variant
I wanted a set of bowls to break out whenever I needed to organize small things. They are quite useful but the lotus theme makes them a little sharp =)
Print approx. €5.78–€7.06 excl. taxPreliminary estimate for one variant
In rearranging my workshop I wanted to put the mitre saw as close to the wall as possible by adding a 90-degree elbow to the dust port for connecting a vacuum hose. I designed this in OpenSCAD and have a great fit with a tapered end that…
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
EN Do not activate supports Bowl with lower compartment for waste (empty shells, packaging, etc.) 2024-12-30 Addition of a version with a 2x0.3 mm operating clearance (the basic version is 2x0.2 mm). Two files “BA-HautJeu0.3x2.STEP” and…
Print approx. €6.59–€8.05 excl. taxPreliminary estimate for one variant
This shallow bowl can be used as a drink coaster, to hold keys, or to organize other small odds and ends. A simple Celtic Knot design decorates the outside of the bowl.
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Schwibbogen mit Ständer.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
I will upload a picture of the moddel when printed in the future.
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
I've provided files for the MINI, MK3S and MK4 along with 3MF and STL files
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
This single cupholder / bowl holder / remote holder / phone holder keeps everything you need within reach while chilling on the couch. Also works with Mugs! I printed in PLA & PETG with 3 perimeters, support cubic infill. If you decrease…
Print approx. €13.38–€16.35 excl. taxPreliminary estimate for one variant
Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
Just a model of a lying pig with a bow and a footprint on its butt. Some models have hanging holes. Just choose the one you need more and print your own pig! Just for fun! Fast print, no need supports.
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
Toy. Sensory tray for kids. This model is capable of being printed with the rainbow color combination or any other color combination you like. I am including the .3mf file, configured with manual color change. The first and last layers…
Print approx. €6.05–€7.39 excl. taxPreliminary estimate for one variant
Model Info | Introduction I want to introduce you to an easy-to-print Bowens Mount Lamp Reflector. I use it printed in PLA with my lamp up to 50% of the maximum wattage, and it doesn't melt or get soft. Save your money as these typically…
Print approx. €10.17–€12.43 excl. taxPreliminary estimate for one variant
Ever wish you could carry a little bit of nostalgia wherever you go? Now you can with this adorable keychain version of the iconic Tupperware Heritage Bowl! This 3D printed model is a miniature replica of the beloved container, capturing…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
If you've got a need for some additional frame-building parts, you can find all of my various 2020 extrusion builds here. Just a little 90 degree elbow. Configured for at least two M5x10 fasteners per extrusion (can be three on the long…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
I needed a way to make my MK4S utilize the 6 mm OD PTFE tube that comes with the Polymaker Filament Storage Box. I didn't want shell out extra money for hardware so I took some inspiration from sgmeesix's MK4 Filament Guide with Bowden…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
In a dust collection system the max elbow you should use is a 45deg sweep. I have tried to keep my system to no more than 30deg. But now with the addition of the new wood lathe space became a problem so here is a 45deg sweep that I needed…
Print approx. €7.23–€8.84 excl. taxPreliminary estimate for PETGSource material: PET
Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
A 90 degree connector for an extraction fan to allow me to better vent out nasty resin, airbrush, or solder fumes. you might need to use an elastic band to “seal” the elbow onto the extraction fan. See gcode for an example of the…
Print approx. €11.62–€14.20 excl. taxPreliminary estimate for PETGSource material: PET
A blower extension for Stihl SH86. Perfect for clearing gutters. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.4 mm Infill: 15% Filament: Amazon Basics PETG Black Notes: Printed with 0.8mm…
Print approx. €7.89–€9.65 excl. taxPreliminary estimate for PETGSource material: PET
A multipurpose bowl with a diameter of 90mm and a height of 40mm. You can scale it as you wish. I printed at 30mm height x 90mm diameter and it was perfect. I prepared the impression to give it 3 passes of Flexible at the beginning to…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Bowl for the holiday table, Christmas decoration. Print settings 0.2 layer height 2 perimeters 5 solid top layers 3 solid bottom layers 10 % infill (gyroid)
Print approx. €5.01–€6.13 excl. taxPreliminary estimate for one variant
Gecko feeders 1,5; 2; 2,5; 3 cm. No supports
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
A bowl to store some nuts or whatever you want. Print instructions Should print without supports. Expect wide bridging on the top.
Print approx. €9.28–€11.35 excl. taxPreliminary estimate for one variant
A Valentine's themed bowl (with and without “Will you be my Valentine?” text), a small/plain heart reminiscent of the classic Sweethearts candy, and 26 larger Sweethearts with sayings including BE MINE, QT PIE, XOXO, CALL ME, HEY BAE, and…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Description Here is the " KOKO Bowl "! I created this design starting with a block of paper and a pencil. In order to give a texture, I used the "FUZZY" technology available in many slicers. I leave you the possibility to market, modify…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Jeder kennt das Problem. Man will Schafkopf spielen aber keiner hat Schalen für sein Münzgeld und muss dann mühsam auf einem Zettel mitschreiben wer wem wie viel Geld schuldet. Da ich kein Modell dafür gefunden habe, habe ich meine…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Průměr (diameter): 45mm Výška (height): 4mm Máte zájem o jiné vzory medailí? Napište mi svou představu do komentáře! Are you interested in another medal patern? Write your idea to the comment form!
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This model is designed to fit a Prusa MK4. You can use PLA for printing. For general infill, I suggest using 5%. However, for the joints, please use modifiers to increase the infill to 15% or 20%. I hope your dog enjoys it :)
Print approx. €6.43–€7.85 excl. taxPreliminary estimate for one variant
2" depth gauge or protrusion gauge for Bowl Gouges. Works with Wolverine Vari-Grind or Ellsworth Sharpening Jigs. Has embedded 6x3mm disc magnets to snap onto any ferrous metallic surface. Use a layer stop or color change setting in your…
Print approx. €1.53–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
This is a rainbow designed by me, which serves as decoration. I have uploaded it in two different widths. Print it vertical with no supports. The narrow 1cm/8cm/14cm (picture). The large 1cm/12cm/14cm.
Print approx. €3.86–€4.71 excl. taxPreliminary estimate for one variant
Show your love for the iconic Tupperware Salad Bowl with this adorable keychain! This meticulously designed, miniature replica captures all the details of the beloved container. Perfect for Tupperware enthusiasts, collectors, or anyone…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Oops Well, I was browsing the repo after I published this and saw there was already an official reverse bowden setup up there. https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/optional_parts/reverse_bowden I'm leaving mine…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
EN: Did you also happen to dig out the bowden, which is used to adjust the height of the headlamps, while changing the bulb in the headlamp? With this cover, that won't happen to you. Print without supports. CZ: Taky se vám stalo, že jste…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a similar tool to measure the radius of bows on existing solids of unknown design. Something like https://www.printables.com/model/137696-radius-gauge-1-20-mm could be helpful, but I needed it for bows with a larger radius. The…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
Standard print settings. If you like the design. Check out these tealight candleholders: https://www.printables.com/model/1135611-greek-tealight-pillars
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
a Debowler Lid with GL45 thread for Arizer Stems for your avp You need additionally one flask with GL45 thread, just search for “GL45” in the www choose your debowler spatula, wether you have the round sieves or the flat ones use the .3mf…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Bring some spooky fun to your Halloween decorations with this 2-in-1 Ghost Candy Bowl & LED Decor ! This cute ghost holds Halloween candy in its hollow body, making it a fun and practical decoration for your desk, shelf, or Halloween…
Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant
This is a snapfit case for the Pimoroni Keybow 2040. It's designed to match the style of the Kinesis Gaming Freestyle Edge RGB. Inspired by Dank Prophet I left a cutout in the bottom to show off the art on the PCB.
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
A catchall bowl inspired by the raw, solid character of natural rock. The outer surface imitates a rough stone texture, while the inner cavity remains clean and functional, creating a strong contrast between organic form and everyday…
Print approx. €7.34–€8.98 excl. taxPreliminary estimate for one variant
Show love for your significant other with this red heart.
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
In the picture, the hook size is smaller than in the project, that is because while printing I thought it would be too small, but that depends on the size you print it. In the wings the height is just 1 mm, and after printing it I saw…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I made a magnet from pictures of ponies from PonyTown game. No multimaterial needed just overlaying several layers of different filament colors. Print instructions Colors Order: Prusament Vanilla While Prusament Pineapple Yellow Smurf…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Pistachio/Peanut Bowl 3x hole
Print approx. €5.04–€6.17 excl. taxPreliminary estimate for one variant
Pen holder for 8 Tombow ABT Dual Brush Pens
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
You should eat roughly 30g of nuts every day. This little bowl will give you just that, so you don't have to measure anything. Of course it will depend on many factors (size, humidity,..), but here are some examples: Pecan Walnut Cashew…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
As mentioned in my original model I wanted to design a dust extractor attachment for my rotary bowl sander. This attaches to my dust extractor hose (40mm ID, a bit of a special size) and has a few openings at the top to suck away the dust…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
Human elbow with cortonoid, AO classifiacation 2U1B The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €5.96–€7.29 excl. taxPreliminary estimate for one variant
Super Bowl Plaque 2026
Print approx. €9.54–€11.66 excl. taxPreliminary estimate for PETGSource material: PET
Spare part for the bowl bottom support for standard Kenwood classic type. Easy to print - slots to avoid warping from the print bed. fits many different Kenwood kitchen machines Print instructions go for 0,2mm layer height. I use PETG so…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
A light bow with LEDs and space for a power supply and electronics in its sockets. The flames are actually taken from https://www.thingiverse.com/thing:3120235 The candles are made with 5mm warm white leds. I used a 5V power supply with a…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Bowling medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Using the Tukkari's enclosure for the MINI+ I had always problems with the spoolside tube sliding out the sensor. This remix fixes the tube with an M3 screw the same way as on the other side. I printed it in ASA as one of my favorite…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . 1/10/2025: Complete Design…
Print approx. €3.07–€3.76 excl. taxPreliminary estimate for one variant
Draped Catchall Bowl is a sculptural bowl designed for everyday essentials such as keys, coins, or small personal items. Its form is inspired by soft drapery or a gently bent sheet of metal, creating natural folds and subtle reflections.…
Print approx. €10.71–€13.09 excl. taxPreliminary estimate for one variant
Bowling Lane Business Card Holder With Optional Website Plaque Sleek design slides and holds together without glue (though glue is recommended) You will be able to add a custom text to the front plaque when PrusaSlicer 2.6 comes out…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Note: I am new to publishing models. Let me know if there is a problem. Tiny bowl with square base for stability to lessen the chance that my cats lose my jewelry. If I am already in bed before I remember to take them off, I can still…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
These are just simple AIO Covers to make them look Cooler. Look out ! If the Fans have Silikon Bumpers the Cover might not fit right
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Rainbow Spinner Ring Stl-Files (without configuration) - Ring Sizes from 55 - 70 3mf-Files (with configuration) for MK3S and Mini - for example Ring Size 65 Printfiles (G-Code) for MK3S and Mini - for example Ring Size 65 Available in…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
