Search results: bridge

Sort order

1,594 models

P
Printablesdtoux

Philips Hue Bridge Bracket

This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant

Downloads
1,993
Likes
291
Rating
5
P
Printablesfunction.3d

Desk lamp with an orbital design, mood lighting, and bridge structure

Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant

Downloads
974
Likes
219
Rating
4
P
PrintablesSJM

H0 Train Station Platform Passenger Bridge Add-On, Bahnsteig Eisenbahnstation 1:87

H0 1:87 Passenger Bridge for Trainstation Platform, Eisenbahnstation Bahnsteig. You need the base train station platform . You can connect two platform elements with the connector and build a longer platform. You get four versions created…

Print approx. €4.98–€6.09 excl. taxPreliminary estimate for one variant

Downloads
586
Likes
62
Rating
0
P
Printablessba1

Brio Lifting Bridge Underpass

I always thought that the Brio lifting bridge is built for letting trains go beneath it, once it is lifted. That was also one major reason I bought a 3D printer, actually. It's compatible with the "old" lifting bridge I played with when I…

Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant

Downloads
379
Likes
78
Rating
4.8

Train Bridge / Tunnel for Brio Type Trains

A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.

Print approx. €6.25–€7.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
319
Likes
69
Rating
4.75
P
PrintablesMichael

Measuring Bridge for Caliper Depth Gauge (Supports 16mm Main Scale Width)

Remix of existing model by SpamBouncer modified to fit my Calipers. Channel for the Caliper Main Scale has been increased to support 16mm width. There are 2 versions both support Caliper models with Main Scales that are 16mm wide. I…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
289
Likes
59
Rating
4.8
P
Printablesskypy

Tiny Distance Tower Test - Retraction / Extrusion / Bridge ..

Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
239
Likes
9
Rating
5

Low Bridge for Wooden Trains - Brio Compatible

This is a 1/2 standard height bridge for wooden/Brio trains. It can be printed on a Prusa Mini sized print bed and is a gradual enough slope that the trains shouldn't bottom out. Using the included piers, these can be paired to make a…

Print approx. €13.84–€16.92 excl. taxPreliminary estimate for one variant

Downloads
192
Likes
37
Rating
5
P
Printablesfoorschtbar

BeamerControl - RS232-MQTT/API-Bridge to control a projector

A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
11
Rating
0
P
PrintablesBas

Marklin C Railway bridge curved

Print the two walls separate, bend and glue into place.

Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
16
Rating
0
P
PrintablesPrusaLab

Charles Bridge

Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .

Print approx. €15.73–€19.22 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
13
Rating
0
P
PrintablesPeter Farell

Ezra Bridger's Lightsaber

A weathered version of Ezra Bridger's Lightsaber. combined the elegance of a single-bladed lightsaber with the practicality of a blaster pistol .

Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
67
Rating
5
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C R1-30° Element (multi part) / Märklin H0 modulare Brücke Gleis-C Element R1 30° (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
17
Rating
5
P
Printablesachwarumnicht

Mudguard Bridge / Schiebebrücke SKS 45mm

I used PLA, which works nicely, but I would recommend PETG.

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
10
Rating
5
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
10
Rating
0
P
PrintablesPrinter4496

Modular Truss Bridge Connector - 3D Printable STEM Project

Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
19
Rating
5
P
PrintablesAlien3D

L298 Dual H Bridge Motor Speed Controller Mount

Mount for L298 Dual H Bridge Motor Speed Controller https://amzn.to/3wRm0ml

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
7
Rating
0
P
Printablesgedeyenite

Lutron Caseta Hub/Bridge Bracket/Holder with Mounting Flanges

There are a few Lutron Caseta Hub/Bridge mounts you can find, but I wanted one with flange mounting options that keep the screws away from the body of the Hub/Bridge. I drew this from scratch in Fusion 360 (I'm still learning) and then…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
9
Rating
0
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C 172mm Straight Element (multi-part) / Märklin H0 modulare Brücke Gleis-C 172mm Element gerade (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
5
Rating
0
P
Printablesjwendland

Aero Bridge with Headlight Mount (parametric)

The bridge is designed to be fastened with 2 zip ties to round 22mm aero bar extensions which are 81mm apart. The light mount should be compatible with many available headlights (10mm width, bore for M6x25 bolt). I printed this in PETG…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
71
Likes
7
Rating
0
P
PrintablesHoenir15

Hue Bridge holder/mount for Ikea Skadis

I redesigned the wall mount for a Philips hue bridge fitting on the IKEA skadis punchwall. I made the walls quite thicker (2mm) to get a more stiff structure. Furthermore I made the skadis hooks a little bit smaller, so they fit more…

Print approx. €2.56–€3.12 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
6
Rating
0
P
Printablescochesdiez

Hockey Trainer Bridge One Piece

Hockey Trainer Bridge One Piece to print on larger print bed One piece remix of Steven Quinn's Hockey Trainer Bridge

Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
2
Rating
0
P
Printablesmstejska

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
22
Rating
0
P
PrintablesStefan0150

Carrera Bridge for dopple Layer

Wenn man mal ein Stütze für die 2. Etage K1 1/60 und 1. Etage K1 und K2 benötigt

Print approx. €3.90–€4.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
5
Rating
0
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C R3-30° Element (multi part, pluggable) / Märklin H0 modulare Brücke Gleis-C Element R3-30° (mehrteilig, steckbar)

Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
6
Rating
0
P
PrintablesNina Máčová

Wall art: Set of three old bridges

Wall art: Old bridges (20 cm) three variants

Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
12
Rating
0

Puente Vieyu de Lugones / Old Bridge of Lugones

Puente en Lugones (Asturias), de origen romano y reconstruido en época medieval.

Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
1
Rating
0
P
PrintablesJDJC3D

Low‑Poly Bridge CMM

Low‑Poly Bridge CMM Machine – Workbench Display Model This low‑poly coordinate‑measuring machine started life as a fun little side project at work—part learning exercise, part creative challenge. It became a great way to get hands‑on with…

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
0
Rating
0
P
PrintablesPracticals

Practicals Philips Hue Bridge Rackmount V1 (Without Lid)

Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…

Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
2
Rating
0
P
PrintablesOBA

H0 modular Brick Bridge Pillar System pluggable / H0 modulares Ziegel-Brückenpfeiler Stecksystem

Work in progress... Christmas time is approaching and it's time to start our X-Mas projects now. So I dare to provide an early release of my latest model railway project... After successfully performing several test prints and pillar…

Print approx. €6.22–€7.61 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0

Guitar bridgetail

this model been create to find where the breaking point hit that coming from the string tension. The final full set of this design (MK2) will be upload when all my own certification rules gain thumbsup. As we all know ..PLA are the best…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
0
Rating
0

Gulf Shores High School Bridge Heart Challenge BESTRobotics2023

Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…

Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
0
P
PrintablesGCHS Robotics

Garden City Highschool 3D Printed Bridge to Transplant Heart BESTRobotics2023

Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…

Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
4
Rating
0
P
PrintablesAlex_Iskra

Bridge Baby Toy (Carry case for kids)

I was playing DS and my daughter really got into the whole carry the baby thing and started to strap dolls to herself. So a decision was made one evening to create a BB pod carry case that can fit a 110mm long doll (or anything else). It…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
3
Rating
0
P
Printableseds_3d_shop

Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!

Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…

Downloads
19,241
Likes
1,519
Rating
4.91

3D Printing Bridge Calibration Test (Basic & Advanced)

🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…

Downloads
19,004
Likes
5,479
Rating
4.86
P
Printables3DMakerNoob

Bridge Test Piece

Multiple pieces to test how your printer handles bringing. The files also includes bridges with sacrifical columns.

Downloads
5,457
Likes
205
Rating
4.95

Bridge Density Experiments

These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…

Downloads
5,250
Likes
727
Rating
5
P

Bit and Blade Bridge

A tool for accurately setting router bit and saw blade height. Measures 2 to 20mm in 1mm increments.

Downloads
4,678
Likes
1,045
Rating
4.98
P
PrintablesDanZbo

Bridge test - Fast & Low cost | Ender 3

Info Simple, fast and low cost bridge test. Only ~2g. Printed really well on my ender 3. Tested with PLA. Update: I have added more distances with level name. Update 2: I tested all levels on my Ender 3 with the Hydra Fan Duct and as you…

Downloads
4,192
Likes
216
Rating
4.9
P
PrintablesRong

Dupont connector bridge

Combine and rearrange single- or multiple-contact Dupont connectors into a same-pitch bridge. Now with multiple row support! The assemblies can be a bit tight, but still much easier to modify than re-populating a dedicated housing. If…

Downloads
3,571
Likes
2,419
Rating
4.97
P
Printablessh

🌉 SET: Lego DUPLO train BRIDGES (optimized)

UPDATE 26.2.2022: added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing) added short straight track (the size of ordinary straight original track) with big side protrusions, which are…

Downloads
2,855
Likes
380
Rating
4.93
P
PrintablesPeter Farell

Zen Bridge and Temple

Zen Bridge and Temple. Print separately. Size to your preference.

Downloads
2,788
Likes
964
Rating
5
P
PrintablesDET-Man

Cable Bridge PLUS for SB2209 / SB2240

Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…

Downloads
2,629
Likes
33
Rating
0
P
Printablescrudo

Gravitrax bridge

Gravitrax compatible bridge for multilayer tracks without supports

Downloads
2,552
Likes
290
Rating
4.94
P
Printablestimqui

Bridge Support - Brio/IKEA Wooden Train Track

Bridge pillar compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: Double height bridge support added! Print…

Downloads
2,407
Likes
516
Rating
5
P
Printablespositron

HO scale railway bridge

An HO-scale bridge for railway modeling. The length is 230mm, about maximum I could fit into my printer. Most parts required 45 degrees rotation. Internal width for trains is around 54mm, full width is around 75mm. Internal height is…

Downloads
2,323
Likes
303
Rating
5

Bridge and overhang test

this is a model I created to test out longer bridges and large overhangs

Downloads
2,226
Likes
76
Rating
4.77

Temp and Bridge Tower

This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…

Downloads
2,218
Likes
53
Rating
4.67
P
PrintablesWilko_SLO

Bridge

Add Pin connectors in Prusaslicer or use glue to fix fence to Bridge main part.

Downloads
2,111
Likes
281
Rating
5
P
PrintablesAndy D

Easy Print LED Light Bridge / Arc

Like so many people, I really liked the LED Bridge Lamp by Opossums . There are plenty of other great designs out there too, like this one , this one and this one . They've all got their own strengths but I felt there might be people out…

Downloads
2,059
Likes
905
Rating
4.96
P
PrintablesDaniel

Brio Wooden Train Bridge Support (Stackable)

I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…

Downloads
1,917
Likes
256
Rating
4.91

Bridge ~ Easy to print

Print one deck and two railings and push the deck in place. You should not need glue. The ribs connecting the slabs of the deck should be on the bottom. Enjoy!

Downloads
1,893
Likes
463
Rating
5
P
PrintablesSDHayes

196 Foot HO Scale Girder Truss Bridge - Self Supporting

I am in the process of designing/building a spare room model railroad and one of the key features I needed was a drop-down bridge to span across the entry to facilitate a loop layout. My design criteria were: 27" opening, prototypically…

Downloads
1,706
Likes
211
Rating
5
P
PrintablesAG3D

Quick Bridge Test

Quick bridge test model.

Downloads
1,535
Likes
29
Rating
5
P
Printablesgoodjobswe

NoBridgeScript: The Typeface Designed for the Third Dimension

I had a novel idea - a font composed entirely of 45-degree angles at maximum. This led to the birth of NoBridgeScript, currently in its first draft. I foresee numerous tweaks and refinements ahead, but the vision is clear: a font where…

Downloads
1,502
Likes
928
Rating
5
P
Printablessquinn

Bamboo Bridge

An attractive little bridge designed so that the main platform appears to be constructed of a series of bamboo trunks, supported by elegant curved beams, and fit with hand rails to ensure safe crossing. The bridge is intended to be…

Downloads
1,457
Likes
468
Rating
5
P

bridge for aquarium

bridge for aquarium supports are needed!

Downloads
1,379
Likes
337
Rating
5
P
PrintablesHuKru

LEGO City Train Bridge with ramps

<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Had to make my own version, to get my own character on the bridge and pillars.…

Downloads
1,359
Likes
215
Rating
5
P
PrintablesMiniWorld3D

Tower Bridge - London , UK

🇬🇧 Welcome to London! This model was made by Brian Sánchez. It has been optimized for printing without supports, it can be assembled easily and it has an functional drawbridge that opens and closes ! The Tower Bridge is a combined bascule…

Downloads
1,349
Likes
250
Rating
4.67
P
PrintablesMagda j

Cat Walking Bridge (fully Printed)

Does your cat look bored outside a window? Doesn't your old cat jump to her favorite spot anymore? Is your cat in need for a new exciting toy? Do you want to print something cool looking and useful for your cat? Then you will need this…

Downloads
1,318
Likes
792
Rating
4.86

Bridge Strength (Truss)

Students will create a 3D printed bridge using different shapes for structural support. Then we apply weight to them. Whoevers bridge is the strongest will win the competition.

Downloads
1,237
Likes
120
Rating
5
P
PrintablesJACK98

Calibration Cube, Bridge, Overhang & Retraction Tower

Test your printer settings on calibration cube, bridge, overhang & retractions all at once.

Downloads
1,209
Likes
77
Rating
5
P
Printablesaiye

1/18th scale crawler bridge

This is the customizable bridge for 1/18th and 1/24th scale crawlers, like the TRX4M and SCX24. There are 3 bridge support sizes, 50mm,100mm, and 150mm. Each bridge support comes in 2 variants, flared base, and stackable. The stackable…

Downloads
1,196
Likes
197
Rating
5
P
Printablesdtoux

Philips Hue Bridge Bracket v2

This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Downloads
1,120
Likes
127
Rating
4.79
P
PrintablesStu

Stone Bridge

Stonebridge I was testing to show colour contrast

Downloads
1,095
Likes
130
Rating
4.75
P
PrintablesDimension Zero

Hot Wheels compatible Bridge (updated)

This Hot Wheels compatible bridge piece adds even more possibilities to your Track builds. I recommend printing two of these but you don’t have to.

Downloads
1,070
Likes
163
Rating
2.25
P
Printablesphi.gl

Bridge pillar for Ikea/Brio train track

Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…

Downloads
1,055
Likes
191
Rating
4.56
P
Printablesnerg

Lego DUPLO train BRIDGES (optimized again)

optimized for better printing and durability

Downloads
1,021
Likes
122
Rating
4.1
P
PrintablesRomain

Brio Bridge

Brio print comptatible with the Brio train system. Fun cheap part to print to improve the Brio system of your kids! Comments appreciated for improvements.

Downloads
990
Likes
150
Rating
4
P
PrintablesRealPrint

Arch bridge for Marklin M-tracks; H0 Bogenbrücke für Märklin M-Gleise

Die Version mit den Ausschnitten ist für die Verwendung einer Oberleitung (siehe Bild). Man braucht die Base zweimal oder die beiden Versionen mit den Cut outs. Dazu das Top-Teil und optional den Connector, um die Brücke von unten beim…

Downloads
969
Likes
94
Rating
4.67
P
PrintablesSupertornado

Bridge test

A simple bridge test

Downloads
963
Likes
29
Rating
4.75

Golden Gate Bridge [String Art]

A model of the golden gate bridge in San Francisco How to make: Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts. Connect the two roads with two pieces of filament (about…

Downloads
955
Likes
107
Rating
5
P
PrintablesSteve K

HotWheels Bridge

Remixed Bridge: Track 2mm wider,Tunnel Fits track,Built in connectors

Downloads
944
Likes
211
Rating
5
P
Printablesgloda

Speed Bridge (Bridging Test)

This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.

Downloads
899
Likes
51
Rating
4.75
P
PrintablesCode2

Ulvheim Bridgehouse

This is my fifth Ulvheim building remix. It's made of 10 pieces that fit an Ender3 size and that you can print supportless. UPDATE: I've update the "D" Section, so you can now revert the entrance to the outside and the paths to the last…

Downloads
897
Likes
224
Rating
4.5
P
PrintablesJuniper

RETRO TRUSS BRIDGE HO (1/87th) SCALE

This HO scale RETRO-TRUSS BRIDGE is a combination of a Walthers Cornerstone Modernized Double-Track Truss Bridge kit (#933-4510) and 3D printed open structure trusses. Use the Walthers truss sides as a template for cutting and mitering…

Downloads
887
Likes
148
Rating
5
P
Printablesdziobu

LEGO Duplo Train track: straight (double size for bridges)

Easy to print, tought and compact construction. Without supports. Category: Construction Toys

Downloads
879
Likes
98
Rating
5
P
PrintablesPepiBlu

Wooden Bridge for Model Railway in H0 1:87

Printed in PLA with a 0,25mm Nozzle and 0,1mm Layer Easy to assemble. Should be weathered.

Downloads
848
Likes
101
Rating
5
P
PrintablesSeppel

GraviTrax Junior Brücke / Bridge

Durch diese Brücke spart man sich nicht nur viele Höhensteinen, sondern hier können neue Ebenen geschaffen werden. Die Mitte ist zwei Steine hoch. Sehr einfacher und schneller Druck. Die Drei Steine mit der großen flachen Fläche mit…

Downloads
841
Likes
75
Rating
5
P
PrintablesMichal Fanta

Bridge Track - W9

Bridge rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini…

Downloads
836
Likes
144
Rating
4.69

Battery Beer Crate - Enhanced Bridges

A simple edit of the original design, which had some overhangs that can be challenging for some materials like PETG. For now this only includes AA and AAA batteries. Like for the original design, the stackable rim is supposed to be glued…

Downloads
814
Likes
139
Rating
4.95
P
Printablesyahbluez

harp 120, the bridge tool

TL;DR Tool to figure out the bridge quality of printer + filament combination, between 20 and 120 mm in steps of 10 mm, needs less than 2g of filament and less than 10 minutes, save a lot of money. Collection tools, 3d printing Motivation…

Downloads
807
Likes
56
Rating
4.86
P
PrintablesLeftcetio

Phoenixville Viaduct Model Railroad Bridge

This is an HO scale model of the Pennsylvania Railroad viaduct over the Schuylkill River in Phoenixville, Pennsylvania. The model was developed using information from HistoricBridges.org and Google Maps in Fusion 360. For more information…

Downloads
802
Likes
55
Rating
5

DaVinci Bridge Puzzle Set

Each beam has 2 cut-outs on one side and 1 on the other. Face the side with 1 UP. Took me a few tries to figure out how to put it together. If you insert the crossmembers, you can lift them to insert the next set of beams. Yes you can put…

Downloads
796
Likes
359
Rating
4.8
P
PrintablesChoumarin

Arch / bridge / tunnel for Lego train

This is an arch to create bridge and / or tunnels for Lego train tracks. It's designed to support 2 train tracks at their connection point. It measures 12 bricks high, which is enough for most trains, 16 bricks wide and 4 bricks long. It…

Downloads
788
Likes
164
Rating
4.67
P
PrintablesPAMport

Bridge Test

Test if your 3d printer can print in the air 3D Benchmark Print settings: Infill: 100% Supports: No Layer Height: 0.06-0.2mm Speed: tested at 40mm/s and 60mm/s (the slower the better)

Downloads
780
Likes
18
Rating
4.67
P
Printablesdusty

Mini Printer Test (Overhang, Bridge and String)

small and fast printer test with overhang, bridges and stringing tests…

Downloads
768
Likes
44
Rating
4.78
P
Printablesdiktux

BRIO & Lego Duplo tunnel/ bridge crossing

Brio rails on the top as a crossing. Possibility to use the lower level as a tunnel. Can be extended with Lego Duplo. Can be stacked. Old version on the image

Downloads
766
Likes
125
Rating
3.8
P
Printablesphysicalzero

Woodworking Joint Bridge Clamping Pad

Nice little gadget to help with clamping wood pieces that you are gluing together. You will need to print four of these to properly clamp two pieces of lumber together that you are gluing up. I hope you get some use from these. I printed…

Downloads
753
Likes
156
Rating
5
P
Printablesmista_niku

Ray-Ban Folding Wayfarer Bridge Replacement

A replacement bridge for the folding Wayfarer sunglasses from Rayban. I initially thought the bridge was some kind of metal, but when it broke it turned out to be plastic (disappointingly). So why replace your pair or buy a costly (last…

Downloads
743
Likes
19
Rating
5

Hovalin v5 Bridge Fix

This is a remix of the bridge part of the Hovalin, a 3D printable violin from Hova Labs (https://www.hovalabs.com/hovalin). The bridge part included in the Hovalin download from Hova Labs is too short. It doesn't hold the strings above…

Downloads
737
Likes
42
Rating
0
P
PrintablesRobbert Laugs

Flexible wooden train track (ikea Brio)duplo adapter flexible bridge, ramp

printed with: 0.4 nozzle, 0.2 layer hight. add more or les between peices to make it longer or shorter. use a string of 1,75mm fillament as rope and with a drop of super glue at the begining and end it is secure. also a middle part, if…

Downloads
735
Likes
325
Rating
5
P
PrintablesBootjevaarder

Railway Pedestrian Bridge H0 Scale

To print this model you need a 220 x 220 mm build plate. Print the bridge with support.

Downloads
729
Likes
73
Rating
5
P
PrintablesIR Blinx

Fairy garden bridges

2 bridges for fairy garden bridges originally created for my niece

Downloads
728
Likes
249
Rating
4.67
P
Printablesrasniel

Duplo/Lillabo bridge bricks

Yet another version of bricks to create bridges with IKEA Lillabo tracks and DUPLO bricks. Designed for an inclination of 2 DUPLO heights / 20cm track. Floor->Slope (bottom) Slope->Slope (middle) Slope->Bridge (top) Bridge->Bridge…

Downloads
719
Likes
109
Rating
4.79
P
PrintablesBasset02

bridge test

bridge test for fdm 3d printers

Downloads
708
Likes
34
Rating
5
P
PrintablesLeftcetio

Ballast Deck Girder Model Railroad Bridges

This is a set of detailed girder bridge parametric models created with OpenSCAD that can be customized by changing the length and other details, and new styles can reuse the code. It started out with a design that is common on the…

Downloads
694
Likes
67
Rating
0
P
PrintablesGuZZLo

Floyd Rose Tremolo bridge stopper

Got tired of trying to tune my electric guitar with the moving floyd rose tremolo bridge . Fixed it with this "stopper".

Downloads
685
Likes
66
Rating
4.75
P
PrintablesTridense

Playing Cards Hardcase - Bridge Size Cards

This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for bridge-size cards, so they will not fit poker-size ones Bring the playing cards…

Downloads
676
Likes
142
Rating
4.75