33 models
I got tired of watching the Amazon cablechain drops lower and lower just before it hits the carbon rods. So I thought about how to prevent that. The solution is to change the angle at which the cablechain is mounted on both sides. In this…
This is a total remake of the original part, just stronger and adjusable. Printed in Petg 0.15 layer 100% infill
I draw a little suport structure, because it leads to way beather printing quality. You have to remove the smal suppot at the end and might wand to file the round part a bit to make sure it turns smothly. I flipped every other part to not…
What it does Original Y endstop housing from Voron (not mentioned in Trident manual) engages with Y linear rail carriage. I made it 3mm higher so it nicely engages with printed parts of right XY joint. This allows to remove cable chain…
This is for users who have the TBSTRON3D Z and X axis kit There are 2 versions one for max and plus and a difrent one for the 4 and pro.
Deutsch: Update: Ich habe das Modell noch einmal überarbeitet, damit es jetzt auch eine Version gibt, die das Montieren eines BLTouch (oder ähnlichem) Sensors ermöglicht. Der Teil für den BLTouch benötigt ebenfalls einige Supports (siehe…
Open cablechain with clip 22x30x15mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories
Cable chain system with 12.5x7.5mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 20mm bend radius. Your printer should be able to print…
Cable chain system with 25x15mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 40mm bend radius. Your printer should be able to print 0.2mm…
Cable chain system with 50x30mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 80mm bend radius. Your printer should be able to print 0.2mm…
After searching without success, I decided to create my own version, inspired by Henlor 's drawing. The goal was to eliminate the obnoxious cable chain. This is a direct replacement part that doesn't affect the original spring tension. It…
It is tested and works very well and is sturdy enough. Happy printing!
Remixed https://github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2/chain_anchor_2hole.stl Cablechain fixpoint taken 4mm upwards and 4mm -X direction to give more space to connector.
A small piece that fits on the motor mount of the extruder motor on an Ender 3. I modified my printer to direct drive and wanted a small support that would hook to the existing, now free, mount of the extruder motor, so I designed one…
These ANTI-SAG cablechain is working without buying any stainless steel metal-strap or something else! ALL PARTS ARE PRINTED! You need 8 chain- and 8 holdingclips, 1 Swingarmholder and 2 Swingarmholderclips and 1 Extruderholder. The…
I remixed the rear mount as my Ender-6 has the Top cover and the rear mount blocks it as it sat on the rop rail. I altered it so it only sits on the top rail by 5mm and clears the top cover. The rear was also modified to make it a little…
Im on a tight budget so I just bought 10x10 cable drag chain out of my local online shopping website. I thought the ends have 3 holes (IGUS style) but it is the standard 2 holes and it does not include spare ends so I made this model. I…
A simple Mount for a cable chain from Frame to Heatbed. If you print ... Thanks If you use ... Post a Make it ... Thanks a lot Category: 3D Printer Parts
This cable guide chain is part of a Fischertechnik simulation project, which involves simulating a high-bay warehouse. The cable chains are needed for the X and Z axes. The chain shown has the following dimensions: 115mm x 25mm x 15mm.…
Update from 2021-05-29: This is discontinued. There will be no more updates. Link to a new solution is here. This thing is especially for an Ender3 V2 with: Micro-Swiss Direct-Drive and Micro-Swiss all-metal hotend 22mm "pancake" stepper…
Broke the part. Modeled new. Printed with PETG.
A simple Mount for a cable chain from Frame to Heatbed. If you print ... Thanks If you use ... Post a Make it ... Thanks a lot Category: 3D Printer Parts
Print settings: PLA Resolution: 0.2 mm Perimeters: 4 Infill: 100% Support: no inner span: 39 mm Made to slide on the tubemount from the Y-Axis
My hero is almost finished only the Cablechains are missing ,.. So i searched and found the perfect fit thank you But i didn't want to rewire so i needed an Open system means you can mount it after you build the printer. An because it…
Remix of: https://www.thingiverse.com/thing:3769941 Added a third support so it did not sag, also added a side attachment for a chain to the X axis. Notes: No Supports Infill 20% PLA+ Shrink to 10% and put the largest flat side down in…
An edited cable anchor for microswitch. The use of umblical chain anchor will block the place for the cable anchor used for microswtich. Hence, I found a new place to mount it on the extrusion.
Chiron Schleppkettenhalter / Cablechain mount
This is a closed version of Ben's published Twin Fan Hotend cover. It has a lid and a holder for the cable chain. Category: 3D Printer Accessories
Mounts for the bed cablechain on my Hypercube Evolution. The frame mount is modeled to fit a 3030 extrusion and the mount on the bed fits a 2020 extrusion. The cable chain has a width of 200mm. Print Settings Printer: Hypercube Evolution…
I added 2mm to the loop part of the Xend_Cover so the cables won't be tight and constrained. The overall length is the same. It has just a little more room than snug. Allows for additional wires that you may need for something like an ABL…
This is an X-Carriage/Frame mount for a 10x20mm cablechain Print Settings Printer: Seckit-Go Rafts: No Supports: Yes Resolution: .2 Infill: 100% Category: 3D Printer Parts
I made a TPU Tube Passthrough for the K1 / K1C Lid. Very good in combination with my loose fit Bowden Clips. Need 2x M3 Brass insert for the cablechain.
![[OECC1] 12.5x7.5mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161367/images/8924418_15aed856-fa6d-4aa9-9777-027257f290dc_faf902f5-847f-484c-9a31-ac1d4c58c2cd/348e53a0-6d86-44fb-8df7-7ac849886a53.png)
![[OECC2] 25x15mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161407/images/8915763_c379734f-27b4-49d9-aa5e-6aaf6c7de211_d0d3623c-9690-49de-8063-aed342546209/b87460c0-58f0-49c7-a329-0dfc596cf033.png)
![[OECC3] 50x30mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161422/images/8915989_80d5c68c-1f0c-4606-a001-5918bdafdacc_57d9913e-c7f8-42b0-8df2-1802d032fb1c/a5f11a44-660a-4451-b1fb-03ad527d0c35.png)
