Unity candleholder
Made for 21 mm diameter candles If you print with a very fine layer height, you can print it without support. Check my print file for more information.
- Downloads
- 79
- Likes
- 13
- Rating
- 5
Counting matching models…
Made for 21 mm diameter candles If you print with a very fine layer height, you can print it without support. Check my print file for more information.
Print with lightning infill to save material and use support on all of them expect the bottom one.
I added a color change at 60 and 100 mm. The model is made for candles with a diameter of 21 mm
Can be printed with no support. Print at 195C to avoid stringing. Rotate the model so the base is vertical. Made for tealights with a diameter of 39.5mm
Basic candleholder in hexagonal pattern design. Works for basic electronic candles. Sizes: Diameter inside: 77mm Height: 114mm Printed in PLA and gives a nice little “shine-through” effect with my electronic candles.
Description Print Settings Printer Brand: Prusa Printer: Prusa Mini+ Rafts: No Supports: No Resolution: 0.2 Infill: 0% printed in Vase Mode Notes: Esun Pla+
Was cleaning out my cupboards the other day and found a pack of candles that I have in case of a blackout. This led me to think of safer ways to hold it instead of risking burning my hands with wax. For some reason this led to me thinking…
We got a candle of unusual diameter (42 mm), so I went ahead and made a holder for it. It was fun to use four of the XL extruders: Noulei gold satin filament Prusament PETG V0 for the fire safe cup in the middle Natural PLA for support…
Candleholder with a spike to attach Candles onto your Advent wreath. Comes in two sizes, 25 and 20 mm Diameter. Print upsite down with no supports.
Made for candles with a diameter with 21 mm The two pots on the picture can be found here: https://www.printables.com/model/1183648-pot-21 and https://www.printables.com/model/1017732-pot-18
The part print easily on its side. Made for 21 mm diameter candles
Made for 21 mm diameter candles. Be aware it can seem a bit unstable, but if you just leave it alone it stand alright.
You need to print the following amount of parts: 4 under 4 top 6 (3+3) full, I.e. 3 in each color. This model is almost a first layer test. Depending on your infill type. I printed mine with the following settings: No bottom or top layer!…
This is Star shaped candleholder I made for my daughter based on she's design, it is better to use aluminum insert if use with ordinary candles.
I got the best print result with a perimeters of 1, since PrusaSlicer adds the solid infill to print the inclined walls. I also used a layer fin layer height of 0.15 mm with a 0.6 mm nozzle. No support needed. The candleholder is safe to…
Print with fuzzy skin with 0.1 thickness and 0.15 to 0.3 point distance to get a nice rough surface look.
Made from bottom up but the principal is not new. I've put some descriptions on the files and underneath. I've attached a candle-holder with room for a wick-holder ready to print that fits the model. It's possible to emboss it if you…
Print with lightning infill to save material Made for 21 mm diameter candles.
Einfacher Kerzenhalter für den Kuchen. Geeignet für 12mm Kerzen. Fusion Datei wie immer dabei, feel free to remix
3-Inch Pillar Candleholder A minimalist taller candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style.…
This model comes in 4 pieces, the top portion of the saber, bottom, base(lukes house) and the doorway with silhouette of Luke. If printing in multicolor I recommend printing the top and bottom of the saber separately as it saves on…
Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…
A decorative candle holder for stick candles with 20-23 mm diameter base. It also fits candles witch are tapered at the end. Candles schuld not be left unattended due to the fire hazard! PLA will burn! Follow me on printables and I will…
Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…
Small flower like tealight holder
Add a touch of simple elegance to your table, nightstand, or bathroom with this goblet candleholder. Its shape demonstrates the essential principle followed in both art and engineering that simplicity is elegance . Printed using…
I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the surface and place…
Deutsch: Dieser klassische Kerzenhalter im modernen Design vereint Tradition mit zeitgemäßer Ästhetik. Die spiralförmige Textur verleiht ihm eine elegante Dynamik, die in jedem Raum für ein stilvolles Ambiente sorgt. Hergestellt aus…
Rotate the model so it is facing down. Print time is between 2 to 4 hours depending on layer height. No need for support in the hole if you use a low enough layer height. I printed them all without on 0.20mm layer height. Made for 21 mm…
3-Inch Pillar Candleholder A minimalist candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style. Complete…
Can be printed with the lightning infill to save material
Make sure you have a good first layer. Easy to make with different colors. To assemble it just insert the inner part into the outer and squeeze the outer a little bit to make it flex so the inner can slide into the joints.
3-Inch Pillar Candleholder A minimalist candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style. Complete…
Was unable to find a good wall hung candle holder for larger led candles, that was similar to one that I've bought years ago. So I made one that looks somewhat similar, this is also my first published design, so bare with me :-) It has a…
Made for 40 mm diameter tealight candles.
Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…
I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the surface and place…
Design Concept The Vertical Skulls Candleholder features a unique and edgy design featuring stacked skulls, perfect for adding a gothic or Halloween-inspired aesthetic to any room. Use This candleholder is designed to securely hold…
As winter approaches I'm reminded of this votive candleholder created last year by one of my students, Lauren. Its pure design perfectly leverages the opportunities afforded by transparent filament and dual extrusion printing -- though it…
Kerzenhalter Kommunionkerze / Candleholder Communion candle holder 7cm Kerzendurchmesser Gedruckt mit 0.12mm Infill: Grid ohne Support
I created it for candles with a diameter of 22mm or 0.87 inches. The fit should be tight, since I didn't want the candle to fall out. If its too tight, consider scaling the model up by a few %. I would recommend a high infill, since its a…
Print the "part" two times with no bottom and no top and a selected infill of your choice. Made for 21 mm diameter candlesticks.
This design adds a simple fixture for up to three candles or tealights to the very beauty halloween latern mentioned above
Transculent candle holder for tea candle or small eletric candle. Good for painting with marker. (Průsvitný svícen na čajovou nebo elektrickou svíčku. Vhodný na pomalování fixou.)
A candleholder, bottom screws out but you can also leave it off, good for tealights. Inspired by another candleholder on here, the bottom part is not required but its a simple screw on, so if you want to glue the top parts together you…
A decorative 2 pieces candleholder with a heart. Each one of the pieces has one half of the heart so to get the heart shaped ornament you must print the 2 of them. Nozzle size 0.4mm, Layer Height 0.2mm, Print speed 300ms, Minimum Infill…
Holder for electric candle lights based on the triforce. 41mm hole for the light
Candle holder for typical household candles (approx. 2.2mm)
A Halloween candleholder with a ghost stirring soup in a pot
This geometrical candleholder has an abstract design made up from three parts, which are recommended to be printed in different colors. The bottom section is a bent-outward cylinder with twisted ribs, the middle section a quadratic…
Made to fit a regular sized tealight led candle, or other similar models It is NOT recommend to use a real candle as it may make the shade plastic soft, if you do decide to print it in PLA, this model was not tested with other materials…
I created it for candles with a diameter of 22mm or 0.87 inches. The fit should be tight, since I didn't want the candle to fall out. If its too tight, consider scaling the model up by a few %. I would recommend a high infill, since its a…
Kerzenhalter Kommunionkerze / Candleholder Communion candle holder 7cm Kerzendurchmesser Gedruckt mit 0.12mm Infill: Grid ohne Support
This geometrical candleholder has an abstract design made up from three parts, which are recommended to be printed in different colors. The bottom section is a bent-outward cylinder with twisted ribs, the middle section a quadratic…
Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…
Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…
Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…