Search results: caulk

Sort order

199 models

P
Printablesfifindr

Silicone / Caulk Cartridge Finishing Nozzle Tips

No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…

Downloads
7,888
Likes
2,557
Rating
4.87
P
Printablesfifindr

Caulk / Silicone Nozzle Cleaner

A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…

Downloads
5,773
Likes
1,803
Rating
4.71
P
PrintablesVC Design

Silicone Caulking Tool

This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…

Downloads
5,206
Likes
2,299
Rating
4.63
P
Printablesapembo

Caulking Gun Nozzle Unblocker

Used to pull set / hardened caulk from a used nozzle. Simply remove the nozzle from the tube, wind the unblocker tool in and pull out the old caulk. Used to restart a tube with nozzle that hasn't been used in some time. Printed with 0.2mm…

Downloads
4,446
Likes
1,438
Rating
4.98
P
PrintablesNir Dobovizki

Caulking Gun Nozzle Unblocker - without support

Caulking Gun Nozzle Unblocker - without support

Downloads
3,667
Likes
1,190
Rating
4.98
P
PrintablesFélix

Silicone caulk profiling kit

This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…

Downloads
3,038
Likes
299
Rating
5

Caulk Tube Cap

Traditionally, I and my father before me would use a nail to plug the end of a caulk tube. It worked, but you'd have to deal with rust from the nail and you'd need different sized nails for different holes. I looked for covers at the home…

Downloads
2,752
Likes
234
Rating
4.81
P
Printablesron

Caulking Gun Nozzle Unblocker. Without support for the handle - Stronger.

Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…

Downloads
2,060
Likes
788
Rating
4.9
P
PrintablesPlatypus1987

Silicone Caulking Paste Spreader Tool

Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!

Downloads
2,041
Likes
161
Rating
4.85
P
PrintablesXeriSystems

Caulking Tool

This tool is used to smooth caulking - the silicon stuff that is used in kitchens and bathrooms to seal between benches and tiles. I printed this in PLA but it's a bit too stiff. I printed in TPU and it's perfect! The small corner is 10mm…

Downloads
2,021
Likes
158
Rating
4.83
P
PrintablesMiguel Silveira

Caulking tools

This set of tools were made inspired in commercially available tools for working with caulking. Print with flat surfaces down Update: larger inner diameter so that tip goes further ahead closer to the end. Print Settings Printer Brand:…

Downloads
2,020
Likes
337
Rating
5
P
PrintablesVladimir Mincev

Silicone / Acrylic / Caulk Smoothing Tools

Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…

Downloads
1,735
Likes
432
Rating
5
P
Printablesfifindr

Silicone / Caulk Cartridge Nozzle Tips

No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…

Downloads
1,581
Likes
639
Rating
5
P
PrintablesBoss_Hoss990

Caulk/Sealant Tube Organizer

Organizer that holds four tubes of standard 48mm OD Caulk/Sealant. Two versions are provided: One that sits on the edge of a shelf, and the other hangs on a wall. Both can be mounted using two #8 screws. Print fits on a standard MK3/MK4…

Downloads
1,517
Likes
555
Rating
5
P
PrintablesTurtleCreations

Caulk spatula

Simple caulk spatula designed for edging. I've included versions in 6, 8, 10, and 12 mm sizes, both in the rounded and 45-degree designs. Created in Fusion 360. The round grip in the middle aids in holding it. I printed it with a 0.12 mm…

Downloads
1,347
Likes
110
Rating
4.77
P
PrintablesTony GRILO

Caulking Gun Nozzle Unblocker - totally without support / Nettoyeur canule cartouche silicone

Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone

Downloads
1,322
Likes
245
Rating
5
P
PrintablesSponge

Caulk Tube Plug Version 2.0 :-)

Give me a Like 💗 Follow Me 😁🤗 Caulk Tube If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. As an Amazon Associate, I earn from qualifying purchases. Category: Tools

Downloads
1,255
Likes
319
Rating
4.4
P
PrintablesLK74

Regular size silicone caulking nozzle

Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle

Downloads
1,213
Likes
166
Rating
5
P
PrintablesIAmDotorg

10oz Caulk Tube Cap

There's a few of these I've seen on here, all of them seemed to not fit or grip well. It took a few experiments, but this one seems to work well for me. Its fit snugly, and held, on all the 10oz caulk tubes I've tried it on. You'll need…

Downloads
1,189
Likes
85
Rating
5
P
PrintablesFrank 3D

Cap for Caulk, Silicone or Glue Cartridge (Custom Buttress Thread)

I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…

Downloads
1,073
Likes
156
Rating
5
P
Printablesvenfor

Caulk Cap - with stem

Added stem to help keep tip of tube clear upon cap removal

Downloads
948
Likes
70
Rating
4.89
P
PrintablesYouCanCallMeAl

Silicone caulking nozzle, ribbed for your pleasure

Silicone caulking nozzle, ribbed for your pleasure, makes (un)screwing fun!

Downloads
854
Likes
90
Rating
5
P
PrintablesLannix Design

Extended Caulking Nozzle

Extended Caulking Nozzle for getting to those hard to reach places!

Downloads
748
Likes
75
Rating
5
P
Printablesvidision

Caulking Tool

The model is 2mm thick. I printed at 0.20mm layer height with a single wall. In PLA+ this is fairly stiff with just enough flex for my needs.

Downloads
661
Likes
70
Rating
4.71
P
PrintablesJoao Martins

Caulking gun cartridge screw cap

This is a simple screw cap to close you caulking gun cartridges. The shape is made so you can use an 19mm wrench to screw/unscrew the cap. Print Settings Printer: P3Steel Rafts: No Supports: No Resolution: 0.2mm Infill: 35% Filament: BQ…

Downloads
640
Likes
69
Rating
5
P
PrintablesTifn

Enhanced silicone caulk shaping tool

Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…

Downloads
588
Likes
73
Rating
4.5
P
PrintablesMooseBoys

Caulk Tube Cap

I wasn't happy with the other caulk caps available so I made a new one. It prints tip-side down so the pin remains stable during the print. I suggest printing with Perimeters set very large (like 20) so the entire volume is printed as…

Downloads
566
Likes
42
Rating
4.17
P
PrintablesHitman4Reason

Caulking Gun Nozzle Unblocker (No supports)

This makes for a way simpler setup for printing and if for some reason(like layer orientation), you still want to print on its side, you can. (Cover photo provided by @Notorial's make)

Downloads
523
Likes
76
Rating
4.8
P
Printablesromanslezak78

Silicone Caulking / Silicone sealant straightener

1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…

Downloads
502
Likes
67
Rating
5
P
PrintablesGunnski

Sausage Caulk Gun Nozzle

The ready-make fix for your automatic Milwaukee Caulk Gun that just broke its nozzle because it fell on the floor… Print with ABS, PETG or similar material at 100% infill with 3-6 perimeters and auto supports enabled and generated. If the…

Downloads
482
Likes
57
Rating
5
P
PrintablesMicha Hainz

Silicone Caulking Nozzle with Integrated Smoother

3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…

Downloads
478
Likes
55
Rating
5
P
PrintablesDJMac

Caulk Sealant Tube Wall Mount (Easy Print)

Simple design. No supports needed. Prints as a single piece. Mounts with just 1 (or 2) screws. Fits on Ender 3 bed. Print, mount, done. I know there are numerous mounts for caulk sealant tubes and I just couldn't find one that was a…

Downloads
473
Likes
99
Rating
5
P
PrintablesNUeB

Customizable nozzles for SikaFlex / industrial glue / caulk (FreeCAD)

I needed to spread an evenly thin and wide layer of SikaFlex glue in a recent project. So I made myself a modular system for a variety of parametric nozzles. When you first open the project file in FreeCAD it looks a bit messy… So let's…

Downloads
469
Likes
60
Rating
5
P
Printablespansono

Kartuschenspitze 60° / caulking gun nozzle 60 degree angle

Spitze um 60 Grad gebogen. Ich benötigte es zum abdichten eines sehr engen Bereichs.

Downloads
463
Likes
42
Rating
5
P
PrintablesDan

15g Silicone, Caulk Remover

A tool to remove silicone and caulk.

Downloads
448
Likes
99
Rating
5
P
Printablesverdrus

Cartridge (caulk tube) lock (acrylic, silicone etc)

To prevent drying out of acrylic or silicone catridges I designed this tool. It has a sealing ring inside. The sealing ring is about 15x10x3 mm German version: Um zu verhindern, dass Silikonkartuschen zu sehr austrocken habe ich diesen…

Downloads
429
Likes
53
Rating
4.67

Caulking Cap

The other caulking lid models on Printables and Thingiverse did not work, so I made one that fits no matter how long or short the nozzle is cut.

Downloads
408
Likes
41
Rating
5
P
Printablesdachu02

silicone gun (caulk gun) glue dispenser - pistolet do silikonu

ENG: silicone/glue dispenser - caluk gun 4 small screws needed to attach base to the glue tube print with 0.2 resolution no support needed infill min 40% (the more the better) PL: pistolet/wyciskacz do silikonu (dodatkowo potrzebne 3-4…

Downloads
407
Likes
104
Rating
4.83
P
PrintablesKerndrup

Holder for caulking gun cartridges (economy version)

These holders har small and thin on purpose so they are cheap to produce in large quantities. If you need a big and very solid product - this is NOT it. But the will hold up to normale use just fine. Hope you like it.

Downloads
396
Likes
106
Rating
0
P
PrintablesJE

silicone caulking nozzle tip angle adapter

In a tight corner, the caulking gun may get in the way. This 135 degree angle can be screwed between the glue/silicone cylinder and the nozzle. Tested with Bison, Den Braven and Pattex cylinders. Printed in PETG 0.15 mm with supports.

Downloads
392
Likes
86
Rating
4.67
P
PrintablesSundfjes

Caulk tube wallmount

wallmount for 3x Caulk tubes

Downloads
378
Likes
77
Rating
5
P
PrintablesCyclone-6

Plumber's EZ Print Caulk Removal Tool

An EZ print tool for easily removing caulking from edges and corners. The beveled triangular head can be used to remove caulk beads by drawling it along angled edges and the pick end can be used to remove caulk from stubborn corners.…

Downloads
374
Likes
26
Rating
5
P
PrintablesJames V

Caulk Gun holder

The screws I used were an odd size. I will model different versions in the future to compensate for standard screws. Would recommend PETG. I only have PLA at the moment, but with just PLA 15% infill it feels very strong.

Downloads
369
Likes
51
Rating
0
P
PrintablesDan

3in1 Silicone Caulk Tool/Scraper (+ 3 Sizes)

3in1 Silicone/Caulk Tool What are the three functions? It includes a scraper to remove the old silicone, as well as two round edges with different diameters, to smooth the new silicone once applied. Three versions There is a Mini, a…

Downloads
352
Likes
93
Rating
4.4
P
PrintablesREMLURELMI

Caulk Saver Caulking Tube Insert

This is a 3D printed part similar to commercially available caulk tube sealers . Have you ever used caulking or some other sealant gun / cartridge gun tube material, but didn't need the whole tube? This part will screw into the open end…

Downloads
343
Likes
55
Rating
4
P
Printablesevil genius

Hanging caulk tube organizer

Hanging caulk tube organizer for 5 tubes of standard sized caulk tubes

Downloads
341
Likes
58
Rating
5
P
PrintablesDarren Lynch

Remixable basic caulking nozzle

I recommend it being printed with something that has good layer adhesion, i.e. PETG, ABS or Nylon since this part typically exposed to a considerable amount of internal pressure for a 3d printed part. I put emphasis on this being editable…

Downloads
326
Likes
63
Rating
5
P
Printablesfifindr

Silicone / Caulk Finishing Tool

Use brim for handle. A compact finishing tool designed for smoothing freshly applied silicone, caulk, sealant, or similar materials. The tool consists of a threaded handle and 9 interchangeable heads that screw onto the end of the handle.…

Downloads
319
Likes
66
Rating
4.5
P
Printablesoffthatwall

Caulk Tube Shelf Mount Organizer

This custom-designed caulk tube holder mounts under a shelf, securely storing up to four caulk tubes in a space-efficient manner. Perfect for workshops, garages, or storage areas, it helps keep tubes organized and easily accessible while…

Downloads
300
Likes
107
Rating
5
P
PrintablesCzarlol

Caulk Scraper / Spatula

Scraper for finishing caulk in various sizes. Would recommend starting with larger size to remove excess caulk then down until desired finish is achieved.

Downloads
284
Likes
20
Rating
5
P
PrintablesHitMxrker85

Caulk/Caulking Tube Plug / Stopper

Be careful with the end of the pointer. It is sharp (to allow it to be inserted into even old, clogged caulking to clear the obstructed hole)

Downloads
263
Likes
32
Rating
0
P
PrintablesTheSteamingHeap

Caulking/Sealant cartridge Nuts - Large and Small

Two sized nuts to seal the common caulking/sealant tubes used in building, renovation, DIY etc. They should stop the contents curing. I've found that disconnecting the applicator and allowing the sealant to cure in the applicator makes it…

Downloads
257
Likes
11
Rating
5

Sausage caulk gun cap

Works for most “sausage” stile caulk gun, the nozzle hole is 39 mm and the thread is more or less 62 mm. I suggest printing in asa, abs, nylon or similar for better toughness I used asa with 0.12 mm layer height

Downloads
245
Likes
10
Rating
0
P
PrintablesDenverDude

Yet another caulk (silicone) tube holder

I designed this to hold tubes of caulk upright in my cabinet, as they kept falling over and rolling everywhere. I found a few other designs out there, but not one that fit my needs. This will hold 8 tubes of any 50mm product, such as…

Downloads
244
Likes
29
Rating
5
P
PrintablesM 360

Professional Caulking Tool – Perfect for Smooth

This professional caulking tool is designed to help you achieve smooth, even joints every time. Ideal for applying silicone, grout, or caulk in bathrooms, kitchens, and other areas that require precise sealing. The ergonomic design makes…

Downloads
244
Likes
20
Rating
5
P
PrintablesBastelBodo

Caulk wipers (two sizes)

Caulk wipers with different corner radiuses for getting gaps closed nice and even with silicone or acrylic. The acute angles of the wipers allow you to keep the caulk in the gap instead of smearing it across the adjacent surfaces. Print…

Downloads
230
Likes
88
Rating
5
P
Printablesdeath4u

caulk cutter

This is for cutting out caulking. It worked good for the little bit of caulk that I needed to redo. I made a smaller version, but haven't tried it. After printing file the edge until it is sharp. The Fusion 360 file is included. Category:…

Downloads
216
Likes
21
Rating
5

Caulk Caulking Gun Nozzle Cap Screw-on

This is the only set of caulking accessories that you will ever need! Print few simple parts and never ever worry about your caulk tube getting clogged up. Base screws on and you either screw on the plug ro the nozzle. Feel free to…

Downloads
212
Likes
20
Rating
4
P
Printablesjattie

Silicone/Caulk Threaded Nozzle Cap

Silicone/Caulk Threaded Nozzle Cap for unthreaded nozzles

Downloads
208
Likes
47
Rating
5
P
Printablesschiferl

The Caulk Hero for When You Need to Save Some Caulking

So you bought a $20 tube of caulking and you're not even going to use 25% of the tube. You've tried a bunch of methods before--using a screw or nail to plug the hole, a smaller cap, cutting the finger off a latex glove and taping it…

Downloads
207
Likes
18
Rating
0
P
Printablesvidision

Caulking Cap

Quick model for a tube of Loctite adhesive. ~58mm and ~66mm sizes.

Downloads
203
Likes
26
Rating
0

Curved Silicone Caulking Nozzle

Curved tip to reach tight spots

Downloads
201
Likes
24
Rating
0
P
PrintablesVoltex

Modular Silicone Caulk Storage

I originally just wanted a way to store my Silicone Caulk Cartridges without them leaking or falling over, just an elegant way and there were many designs available, but none of them had really fit what I was searching for, so here are…

Downloads
187
Likes
42
Rating
5
P
PrintablesZultax

Wall mounted mastic/Glue/caulk cartridge holder

a wall mounted caulk cartridge holder

Downloads
180
Likes
13
Rating
0
P
PrintablesTitanOX

better Ryobi Caulking Gun Plunger

The stock plunger did not press evenly on the cartridge plunger leading to enormous leakage at the back of the cartridge. I almost exclusively use the polymere cartridges from Würth (German professional hardware store) I used a metal…

Downloads
180
Likes
22
Rating
0
P
PrintablesTheProb

Powerfix caulking gun cap

Designed a cap for Powerfix's caulking gun. Suggested printing settings: Use at least PETG, I've used PETG-CF Use 4 walls and 4 top/bottom layers Gyroid infill suggested Fuzzy skin suggested for better grip

Downloads
180
Likes
28
Rating
5
P
PrintablesRyan Perry

Caulking gun cap

I made this to plug regular caulking tubes that don't come with a cap. This will prevent the drying out of your tube and has a small piece that goes in the hole to plug the hole and help keep the tip on. When the material inside the cap…

Downloads
160
Likes
19
Rating
4.67
P

Two Component Glue Dispenser / Caulking Gun

I bought this automotive glue that requires a special two-component glue gun to use, so made this model which takes a M5 bolt, and has a small winged nut retainer that you can use to precisely press out as much glue as needed. There are…

Downloads
152
Likes
30
Rating
0
P
PrintablesKim Fransman

Caulk & Silicone Tube Holder for Wall/Van (5 tubes)

Update: Made a v2 with a bit more tolerance and also moved the screw hole positions to flanges on the sides, and edged out front holes to make it easier to print without support. Holds 48mm tubes rattle free. managed to squeeze a 50mm…

Downloads
150
Likes
10
Rating
0
P
PrintablesCristi

Remix - suport for silicon/caulking gun cartridges

I have printed a bunch of supports according to the model made by Kerndrup (to whom I thank once again) but the top part breaks very easily. In order to make it more durable without exaggerating the consumption of the material, I remixed…

Downloads
147
Likes
23
Rating
0
P
Printablesolekhal

Caulk gun holder shelf mount

I needed a holder to mount caulk guns on the underside of a shelf, in my paint storage cabinet. Remixed the design from SSL, and changed the screw holes to work with 4mm countersunk wooden screws. Recommended to be printed in PETG, ABS,…

Downloads
140
Likes
13
Rating
0
P
Printableselcojacobs

Caulk tube cap

Simple cap to seal a caulk tube after use so it doesn't dry out. Category: DIY

Downloads
134
Likes
19
Rating
5
P
PrintablesMr_Tantrum

Caulk Tube Nail Plug

Summary I don't do a lot of caulking but when I do the nozzles on my used tubes seem to always be clogged. Caps don't work, short plugs don't work, etc. The only thing I find that works for me are large long nails that I put into the end…

Downloads
133
Likes
20
Rating
0
P
PrintablesAnkerman

Caulking tips 10mm and 6.5 mm

Caulking tips with a 10mm and a 6.5mm radius. Can be screwed directly on the caulking container.

Downloads
132
Likes
24
Rating
0
P
PrintablesAlexander Smith

Silicone Caulk Wall Mount

Designed, prototyped and tested Can be scaled up to fit spray paint cans Category: DIY

Downloads
123
Likes
14
Rating
5
P
Printablesbstolk

Caulking cartridge cutter

Update 30-3-26: optimized some dimensions to make the cut a bit deeper. (The caulking tubes differ slightly between manufactures), What is a painter without his trusty caulking gun, for sealing windows, for hiding cracks in the corners…

Downloads
112
Likes
25
Rating
5
P
PrintablesScheimann

MYTRA Caulk Tube Holder

A wallmounted holder for Caulk / Sealant / Mastic / Silicone; which makes it easy to grab a tube when needed Screw holes are 3.2mm diameter. No supports or brim needed - just print! Printed with Prusament PLA

Downloads
111
Likes
20
Rating
5
P
PrintablesDanishsparky

Holder for caulking gun cartridges

Holder for caulking gun cartridges print in place easy to hang. I can make some changes if u have different needs

Downloads
110
Likes
20
Rating
0
P
Printablesmkosiedowski

Caulking tube nozzle (Dragon)

A nozzle for small caulking silicone tube (produced by Polish company Dragon)

Downloads
109
Likes
10
Rating
5
P
PrintablesSaFc

Caulking Tube Wallmount

Wall mounted bracket to hold 4 caulking tubes vertically.

Downloads
108
Likes
20
Rating
5
P
PrintablesZeroCircle

Caulking Glue Tube Rack

This rack can be used horizontallaly or vertically. you can also print multiple and stack them. This rack is made to fit a 210x250 bed perfectly. I used this pipe from bunnings and cut it into 11x 150mm lengths, you can make it longer if…

Downloads
102
Likes
41
Rating
0
P
PrintablesJsR

caulk cartridge sealing cap

caulk cartridge sealing cap 24mm wrench you can open it, if glue etc hardens

Downloads
102
Likes
8
Rating
5
P
PrintablesSietse3D

4 Piece Caulk Tube Holder (caulking)

I designed this 4 caulk tube holder (kitspuit tube houder in Dutch) Its made for screwing to the wall with countersunk screws.

Downloads
100
Likes
15
Rating
0
P
PrintablesMateusz Tokarz

Silicone Caulking Tool Set | Radius 2-15mm

Achieve professional-looking joints in your bathroom or kitchen without the mess. These profiling cards are designed to smooth out silicone or acrylic sealant, creating perfect radii every time. The Design: Size: Handy 80 x 80 mm format…

Downloads
98
Likes
13
Rating
0
P
PrintablesRex

Caulk / Adhesive Tube Holder/Organizer - 16 Places

This is a sturdy stand for storing ~48mm caulk and adhesive tubes. It is heavy and durable. My wife suggested adding the snap-in hole plugs to prevent debris from accumulating in the open cavities. If you choose to print the optional…

Downloads
95
Likes
23
Rating
0
P
PrintablesSmokingHandbag

Silicon & Caulking tube caps

Not too much to say on this one, Its a really simple cap that should work on all caulk & silicon tubes to reseal them after use.

Downloads
91
Likes
8
Rating
0
P
Printablesmadcap

Caulk tube holder - wall mounted and free standing (plus test ring)

A storage solution to all those caulk tubes that we collect in our workshops/sheds/garages. I originally designed this to be wall mounted, but have also provided a modified version for free standing if that's what you require. (I haven't…

Downloads
84
Likes
12
Rating
0
P
PrintablesGreg J Carter

Ryobi caulking gun hook

I needed a way to store my Ryobi caulking gun while capping windows and sealing eavestrough corners. I designed this hook so I can store the tool on the ladder. My first print was 100% infill / no brim and it lifted off the bed. I changed…

Downloads
84
Likes
15
Rating
5
P
Printablesolekhal

9 caulk cartridges horisontal storage

Based on Pitel's design for storing 9 caulk cartrigdes / tubes or similar. Changed to horizonal storage and to be printed in a pair. Thickness changes from the original 51mm to 18mm, which seems strong enough. Added 4 wood countersunk…

Downloads
82
Likes
15
Rating
0
P
PrintablesRay

Caulking / Silicone Tube Wall Mount - Minimalist

Minimal filament usage. Mount tubes in either vertical orientation

Downloads
81
Likes
9
Rating
5
P
Printablesavolkov

Nozzle extension for a heavy duty caulk gun

Nozzle extension for a heavy duty caulk gun Tip Diameter: ¼ inch (6.35mm) Total Extension Length: 31cm (when printed diagonally on an i3-style bed) This extension works great for reaching tight spots, but note that the trigger will become…

Downloads
80
Likes
8
Rating
0
P
Printablesrod1234

Under Cabinet Caulk Tube Holder and Caulk Tube & Caulk Gun Holder

Modified Caulk Tube Wall Mount to fit under a cabinet with a recessed bottom. Added a second option to also store a caulk gun.

Downloads
80
Likes
13
Rating
5
P
PrintablesOshik

CAULK TUBE CAP REMIXED

Added few milimeters for better clearance so it wont rub against the caulk gun. Added a slot for a thin tag wire for not losing the cap. Added V2, threads all the way for better grip. I would love to hear what you think and if there is…

Downloads
79
Likes
11
Rating
5
P
PrintablesJack J

caulking tool

a tool you use to caulk

Downloads
77
Likes
10
Rating
0
P
PrintablesSpaceDino

Pegboard Caulk Tube Holder

Pegboard Caulk Tube Holder. Got tired of digging through a bin and finding I had multiple tubes of the same caulk - now I can see them all. Printed with PLA and ASA. ASA was overkill, PLA is sufficient. Recommend printing on side for…

Downloads
70
Likes
16
Rating
0
P
PrintablesTekiru

Drill-Powered Caulk Gun with Gear Reducer

This is a drill-powered caulk gun with a compound gear mechanism that translates rotary motion into a strong linear push. The model includes two drill mounting options : A-type: Clamp-on mount for secure tightening B-type: Snap-fit quick…

Downloads
69
Likes
20
Rating
0
P
PrintablesUgars

Caulking Gun Spare Tip

This is a spare part for a classic caulking gun, print time is just 35 minutes! I used PETG, but ABS and PLA also works.

Downloads
69
Likes
9
Rating
0
P
PrintablesCDavid

RTV - Caulk Plug Cap

After cutting the end of your RTV or Caulk applicator, if you do not securely seal the end, the unused portion can harden and be useless. This Plug steps in increments of 0.5mm from 4 to 9mm. Just push it in firmly, until it will not go…

Downloads
66
Likes
3
Rating
0
P
PrintablesJPN_FI

Caulk sausage gun spare piston

The soft 'sausage' packed (600g) adhesives and sealants are significantly economical than usual the 300 ml cartridges. Though the sausages require the dedicated caulk gun, those typically can habit cartridges and the soft sausages with…

Downloads
66
Likes
9
Rating
0
P
Printablesfifindr

Silicone / Caulk Gun Applicator

Use brim for cartridge body + 3 walls. A fully 3D printed applicator for silicone, caulk, sealant, adhesives, and other standard cartridge-based materials. The tool is designed as an alternative to a classic caulking gun and uses a…

Downloads
64
Likes
18
Rating
0