Double P-top Bora Centipede
It' a Double P-top for Bora Centipede.
- Downloads
- 319
- Likes
- 37
- Rating
- 5
67 models
It' a Double P-top for Bora Centipede.
Cool centipede robot, fully articulated and easy to print! Reaaaalllly flexible, strong joints, easy to print with a good surface contact with the bed. Two versions included: -Centipede complete, with antennas put aside on the bed. (You…
One of the most daunting and feared creatures of the night With 17 body segments and 30 articulated legs it feels even more alive than typical 3D printed dragons (...if you dare). Loosely modelled after the giant redheaded centipede.…
Articulated centipede model designed by myself in Shapr3D. A simplified stylised model. Designed to be printed without supports. Do not add supports or it with spoil the joints. Very satisfying movement on this model. Makes a great fidget…
This Centipede has articulating segments and can move in multiple directions. I printed it with PETG at 0,2 mm layer height. Infill 10% The first layer 0,25 mm for better adhesion. It can be tricky to get the legs right without falling…
Access pre-supported files & more by supporting me on Patreon!
6" Threaded Riser Extension for BORA's Centipede collapsible work stand system. Threads directly to work stand and raises worksurface from 30" to a more comfortable 36". Extension is compatible with factory attachments and fittings. You…
This is a 2x4 X-Cup bracket for the Bora Centipede. It comes in two parts that are easily assembled with a few light taps from a hammer or a mallet. If you're concerned that the post may back out, add a little bit of CA Glue (Superglue)…
This nut matches the spec used on Bora's Centipede expandable workbench system. Standard nuts are too tall and wide to fit with their 'p-top' and riser accessories. It's unfortunate that Bora makes it this difficult to replace a small,…
A Centipede. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
These are scalable/parametric, hardware-compatible risers for Bora Centipede work stands. Bora sells 6" high risers, making the stands 36" high. However, if you use a sheet of plywood or a table top for the work stands, the working height…
I break down sheet goods with a track saw on a Bora Centipede using a pocket-holed 2X4 frame, clamped on the Centipede, with a foam board on top. The 2X4 frame is unwieldy and difficult to clamp down. When I looked at the Bora top, I had…
Simple corner and straight adapters that hold a 4x8ft sheet of material in place, helping in keeping the table square. It possibly works on smaller tables with smaller sheets, but it has not been tested yet. No supports needed. Just…
flexi centipedes as cable organizer clip
Giant Centipede - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 This nightmare-inducing Giant Centipede rears high into the air, brandishing deadly mandibles and a terrifying multitude of skittering legs. A venomous terror from the dark…
Painting standoff (or painter's pyramid/cone) insert for BORA Centipede system. Fits in to factory "P-Cap." Its function is pretty straight-forward. Just set the piece you are painting directly on to the Centipede frame and go to town.…
The body needs no support, the head does. I found the best was to print the head is in this orientation, see on the pic 3. If you find a better way go with it. Be careful with scaling, the clearance between the head and body also scales.
Add a creeping sense of dread to your next tabletop campaign with this highly detailed Giant Centipede miniature. Perfect for dark dungeons, overgrown swamps, or forgotten forest ruins, this model is designed to strike fear into the…
This is a cute little centipede I articulated and modeled in OnShape. And can be scaled to as big as your plate. Play with it, mod it, put it through explosive science experiments do whatever you want with it!!
Printed Parts Assembly Attach the Base Screw : Begin by screwing in the plastic screw underneath the small base section. This extra support is here solely to provide more strength. Select the Right Peg Size : Choose the pin sizes that…
Riser Extension P-Cap for BORA's Centipede collapsible work stand system. Design and layout matches factory dimensions, and improves upon it. This "P-Cap" design threads on directly, without the need for an additional nut or tools to…
This is a tinkerplay compatible toy I made in tinkercad. I recommend printing this in petg if possible as pla can split at the socket. you need to print 1 head section 1 tail section 15 body sections 15 pairs of legs (what's pictured but…
Knurled insert for BORA Centipede system. Fits in to factory "P-Cap" to provide a gripping surface for worktop. I've seen many complaints about the P-Cap being slippery, so it's difficult to keep worktop from sliding around. This little…
Riser Extension Cap for BORA's Centipede collapsible work stand system. I have seen a lot of complaints about the BORA P-Cap being too slippery to keep table top in place, so I have included both a SMOOTH and a KNURLED design. Rubber…
I wanted extra panel supports for my Bora Centipede work table, so I created three versions. In the pics, you can see the original Bora support along side the printed version. There are 3 versions, one with a flat top surface, one with…
A print-in-place articulated Centipede-like creature . Body-segments as well as legs moves freely. Requires no assembly. On the plate, the legs are printed upside-down but falls into the correct position when done. Files for 3 sizes are…
This one is not printed yet, guess it will require some modifications. More free toys, games and creatures here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape%2Ftoys_and_games
Various shapes of the P-Top. Fits well enough with my settings using ABS @ 0.6nozzle/0.3mm LH. Did not optimize to save filament so it does use a good chunk of material. Recommend using a brim and printing in orientation in the…
This is my first moveable print! Have fun with it. give the bug lots of attention and show it to your friends :)
This is a model of the House of Avitors 'The Centipede', a building in Moscow stading on 40 pillars (or "legs"). The model is constructed mostly from photos, it's not 100% accurate but still quite close to reality. Russian Wikipedia…
I'm uploading this from Thingiverse since I didn't see it on Printables and this is my platform of choice to organize all my projects. This is the creator's description for their model: "Have a Bora Centipede Workstand - great for cutting…
A closer to reality centipede and easy to print
Recommend printing in PETG for more durability of the joints. Print as many trunk sections as you want (plus two legs for each)!
Purpose This little reversible tool is for both types of nuts (hex nut and the 15-sided one on the risers). It features a small ejection plunger for nuts that get stuck in the tool. Print Settings I used the default 0.25mm Speed profile…
Hook accessory for the Bora P-Tops. It works with the stock P-Tops as well as my own versions linked below (and maybe others). https://www.printables.com/model/1557411-bora-centipede-p-top-various-shapes-double-triple I printed in ABS,…
I wanted to attach some leg levelers to my Bora Centipede work stand, so that I could use it in my garage without it wobbling. I made these adapters to allow me to attach cheap plastic cabinet levelers to each leg of the Centipede. I…
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed Note that voronoi models are ideally more vertical than horizontal to avoid needing too much support. As…
Senana the centipede is your best friend. She has tiny little pointy legs.
5" riser block for the Bora Centipede.
It is a simple alternative for those who like the bora centipede, but are using the metric system. The Holder measures 102mm to have some room for errors and warped beams. It is designed to work with cheap materials and still be sturdy…
I designed these table risers (stands?) for the BORA centipede collapsible work table as I wanted something that packs flat and fits in the original tote bag. There is a satisfying snap when you connect the two halves of the riser which…
Was hesitant about making these since I figured layer lines in this flat orientation might cause frequent breaks of the risers. After printing, however, they feel pretty solid. Time will tell I guess. Results may vary for you since I've…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This model is intended as a test and development model for a modular articulated joint system inspired by a centipede / millipede. It consists of individual parts that are printed separately and then assembled into one flexible structure.…
An Arduino case for use with AmplifiedIT's Chromebook enrollment project found at http://labs.amplifiedit.com/Centipede/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iNoIp6slcZ6 Note: I started to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Inserts have a slight press fit into the centipede frame.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
It's a low poly centipede I recently made This is my first articulated 3d model that I made. Its a bit pointy. NOTE: don't print too small or it will not print correctly
Ce boitier permet de construire un rover RTK suivant le tutoriel centipède sans s'occuper des soudures electroniques et de la gestion de la batterie. Le système est plus gros mais permet de ne pas passer du temps de soudure etc. Il…
I really like centipedes and thought, "You know, add some legs and these would resemble centipede body segments!" So I did. This only includes the straight and 120 degree covers, does not include the T or the 60 degree as I couldn't…
I made up a switch Blade Multi-tool. when designing i wanted to make sure it could cut bottles at different thicknesses like other guides for making PET filament but also i can tie knots and a bit og heat makes them very strong so i…
Have you ever had a itch for a centipede friend? well here u go.
Same as my other remix for the plain cable covers, just with the added centipede feature from Fairaday
The drawstring hole is 5.8mm. Pixel height/length is 2.0mm. There's 3 multicolor layers, a single color middle section, then 3 more multicolor layers + a few more top layers on some colors for texturing. Hopefully that cuts down on the…
I made up a switch Blade Multi-tool. when designing i wanted to make sure it could cut bottles at different thicknesses like other guides for making PET filament but also i can tie knots and a bit og heat makes them very strong so i…
I really like centipedes and thought, "You know, add some legs and these would resemble centipede body segments!" So I did. This only includes the straight and 120 degree covers, does not include the T or the 60 degree as I couldn't…
Please use it wisely - this Scolopendra turns out maybe bit too realistic... ;) No assembly is needed. No supports. Prints in less than hour. Tested on SLA printer, should also print well on FDM - after scaling up (the bigger, the…