157 models
I was installing hex sound tiles for my backdrop to reduce sound echo, and I couldn't find something good enough to get a consistent and level gap between the panels. Specifically the 3-way intersection so I made HexTile SpacerTool 20 You…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
Hey guys this took me a long time please like, follow, and download.
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for one variant
100x160mm sign, with instructions from the Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs. You may wish to observe…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
This is a concert sized ukulele designed to be able to print on most prusa i3 sized printers. the split parts must be glued togeter, but most of the pieces fit together without a need for glue, however they do work better if glued in…
This is a replacement wristband clip for a music festival / concert wristband. It's modelled after the VELD 2023 ones, though without the inner spikes that prevent it from loosening. A great replacement if your wristband clip breaks or…
In dimensions of a standard credit card, but 1mm thick, whereas standard is around 0.8mm. Not to be used with malicious intent. 2.6.2023: Now updated with a lanyard hole.
🇬🇧 Snoopy at the Concert – Musical Figurine Stylized 3D printed Snoopy figurine with guitar, captured in a relaxed concert pose. Part of the “Snoopy at the Concert” series, featuring all main characters from the iconic Peanuts comic. 🧩…
Do you need a clip that's not only reusable but also better than the original onces? Well then this is perfect for you, this reusable/adjustable wristband clip. it's designed to be easy to use and comfortable to wear! How to use: To use…
This Huntrix concert light stick has a slot for a small flashlight to make it light up. Recommend printing it in transparent PETG and doing a layer change or MMU color swap for the colored portions. I've included a solid file and a…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concepts This…
This is a Case for vaccination certificates in europe. This is print in place. Tip: put a Logo or a Label on the case with PrusaSlicer using modifiers ;-) Edit: I added another version to fit the older certificates, as requested in a…
6" + 8" Concert-Toms My first REAL usable great sounding drums... Easy to print… Change the colour of your Filament after about 5mm printing hight, so you get a cool-looking ring… The mounting-system needs this special drumlug with a…
Camouflage Concert-Toms 6" 8" 10" - Multicolour Print Great sounding Concert-Toms in 6" 8" and 10" printable at once with my Multicolor Printer - Bambulab X1 + AMS 4 Colors I have been working on this design for several years now… and…
Sanway K21 subwoofer speaker and Sanway A15 loudspeaker. Models with holes can be connected into a stack using the peg for connecting the same type speaker or the angle-peg for connecting the A15 to the K21. Pictured are the individual…
This is a Token Dispenser for specifically designed for Festival/Concert payment Tokens like the one seen in the picture. It holds 13-15 Tokens. You'll also need a spring (35mmx9mm /…
For the brave soul who keeps the chaos mostly contained. This freestanding desk sign declares your official rank in the workshop hierarchy: “Certified Shit Show Supervisor.” Whether you're herding cats, debugging spaghetti code, or just…
I was requested by my niece to design a lid for her cup. I made over 10 prototypes to get the seal just right. Although the one shared here is a little lose to make it easier to put on and take off. Adjusting the seal 0.10 mm could get a…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/95Zpu8cwwId Category: 3D Printing
SIDIO Compatible Crate (stacking) 12.5x18.5x11in (without separators or draft) Let's be real, no one is being organized with tiny 3D printed containers. We need large format organizational systems, in particular for manned mars…
An example of 3D model generated with my Gugulele OpenSCAD script… (see https://github.com/bguan/gugulele ). Decorative headless unibody gourd shaped design Single rectangular through-body spine Single oval off center sound hole T-Bracing…
PLEASE NOTE this has not been certified and was simply to be used in the case of nothing else. If anyone can help certifying I would hugely appreciate this. With the current chaos I was busy printing loads of the Prusa covid face shields…
So i made this Ukulele for 3D Printing. Its a Concerto Ukulele so its a little bit large. Of course it cannot be printed as a single body. That's why i have splitted it in different parts. I would suggest to sand it before putting it…
Clip designed for Triple 3-1/3" InvisiVent soffit by CertainTeed to provide for light weight hanging without drilling or strong adhesives. Insert into the vent slot with clip parallel to the slot, then turn to lock into place. Should not…
Camelot or Certain Death - Monty Python the Holy Grail
I made these a while back and saw that Jerrari did an update. I have lots of printed drawers already and just need dividers. Jarrari did a great job with his design and I love that there are people out there willing to do this sort of…
This is a motorcycle chain slack gauge for certain Beta models, including the 350RR, X-Trainer and more, modeled after Beta's own tool at https://betausa.com/ab-15008.html . I strongly recommend getting on of theirs, which is made of…
https://3dprint.nih.gov/discover/3dpx-013309 These are certified by NIH and print in a shorter time than the Prusa Shields. I have posted over in the Prusa Community Forum a file for cutting the plastic on a Cameo Sillhoette Vynil Cutter…
iPhone 12 / 13 / 14 / 15 / 16 Pro Audi TT Mk2 (2006-2014), Audi Q3 8U, CD Concert Support Changelog: V2 - Added power button and volume button, respect the orientation of the phone, and extended compatibility to Audi Q3 8U (2010-2018)
[English] Sylvanian musicians definitively need a concert hall ! I design it for my daughter birthday. You can glue 4 magnets (12*5 mm) in the dedicated holes to easily assemble the two parts and disassemble them at time to tidy up.…
Il s'agit d'une mini salle de concert pour mettre en valeur vos créations, par exemple. Au niveau de l'emboitement, il se peut qu'il faille les poncer un peu pour que ça rentre. Le tout assemblé fait 32x32x27 cm. À imprimer avec des…
Wurz Cranknibble - Certified Gear Whisperer
My first attempt at making an ASE badge. The raised letters are optional and can be printed on their own and inserted in.
A compartmented storage tray for 25 certipacks (carticards) containing gold or silver coins/bars. Perfect for collectors and investors. Each slot is precisely sized for standard packaging (like Certiline), keeping your collection secure…
A small concertina-shaped rosin case, modeled after a pre-WW1 anglo-german concertina by Charles Jeffries. Printed in two colors (black & silver). I also tried using layers and different colors to make the end-plate and buttons a bit…
These are no one-size-fits-all Roomba stoppers like others I've found. They are tailor-made for the following two laundry rack models: Leifheit Pegasus Alpfa Magic I printed them from TPU and fixed them with a small screw. The screw may…
Simple ukelele stand designed for Enya Nova U Concert but may fit other Nova U ukeleles from Enya.
This is a Bahtinov mask with an integrated lens cap for the Lacerta 72/432 ED refractor. This is the same scope as the William Optics Megrez 72ED, or Levenhuk Ra R72 ED, so it will fit those, I added the clean lens cap without text for…
Give this to someone whos so stupid they have to be certified for it.
It's a work in progress, and I need to test it. (Version 2) No supports needed.
This is a tube ring that fits the Lacerta 72 ED Telescope and it's purpose is to provide mounting slots for two finder-scope shoes. In the pictures you can see one shoe mounted and the holes for the second one. I placed strips of velour…
Golrik Sparkgrin - Certified Lightning Misuser
5 String Concert Ukulele A commenter asked on my other project (a "normal" 4 string Concert Ukulele ) asked if my generator can produce a 5 string version, so here it is! DISCLAIMER: I haven't tried printing it yet! Third Party Parts:…
It's a work in progress, and I need to test it. No supports needed.
This is a very old model I made as a substitute for all the other wargaming miniature razor wire options I had seen before. This prints a very long section that can be cut to any lengths needed. As you can see in the closeup of the 3d…
So, I loved the original, but I wanted a spot to hand my needle nose pliers, and the Allen keys always move around and seem like they are trying to keep you from grabbing them. So duplicated the hanger for the snips and added it to the…
Made this because the center of the spool of the Geeetech filament I got was so large it didn't spin very freely, Its also can be used to mount the filament on a dremal 3d printer. Its a 75 MM outer diameter I had another Geeetech that…
Print with PLA+, 50% Infill since this is a mechanical part. Did this for my father-in-law, which is a technician in vending machines. The brand don't sell the gear itself, they make you buy a new model of motoreductor, this was made to…
Ukulele holder primary for koncert size version. No support needed. For soprano or other size must scale model. Enjoy!
A little while ago, I asked Reddit what kind of Ork you’d like to see — and I promised to sculpt it. Here’s the first result! Huge thanks to everyone who takes the time to check it out or download it.
I was missing two Handles for a older table soccer table, so i designed some and printet them on my 3d printer Depending on how heated your matches are, id recommend to go with at least 3 perimeters and 20% infill, the more the better. If…
Yeah, we mistreated them in the name of Windox, but we did explode the planet.
Clock and Concertina Springs to use in your parts Basics here so may need some work a bit rough. Experiment shows PLA is not too good for these. Uses springy filaments Category: 3D Printing
I printed it with supports, those were a little tricky to remove but only took 3 mins. Please post your makes I would love to see them printed and/or painted!
Un puzzle acertijo para pasar un buen rato
Snoopy at the Concert – Musical Figurine: Charlie Brown Edition Stylized 3D printed Charlie Brown figurine with guitar, captured in a relaxed concert pose — part of the evolving “Snoopy at the Concert” series, showcasing all beloved…
These are easy to print stands and wall mounts for F1 certificate packs, so you can proudly display them next to your Formula 1 memorabilia to show their authenticity. Also, another wall mount/stand will be provided soon for the very…
Resized to 85 mm with an 8 mm bore to fit a very small table.
🎵 “Concert Hall” – Funny 3D‑Printed Wall Sign 🧩 Description Bring a touch of humor to your bathroom with this playful “Concert Hall” wall sign. The design features a fun twist on the idea that the bathroom is everyone’s favorite place to…
As I said, it is a WIP but I'm putting it here anyway in case anyone wants to fiddle with it. Rn it works fine but only with modifications. I'd make them myself but I am a total noob when it comes to CAD work and I was using SelfCAD and…
Similar to all my other headless ukulele designs. I designed it for folks with bigger hands and fingers, the nut width is 40mm, 10mm between strings. It can be printed with FDM printers of at least 300mm in Z-axis, and 250mmx250mm on X &…
Give your dog a small present when they have been good boys. Printer: Elegoo Centauri Carbon Nozzle: 0.4mm Layer Height: 0.16mm Infill Density: 15% Supports: No Filament: Any, I used PLA Silk EDIT: My dog while wearing it rolled around…
At lots of concerts people wave around colored pen lights. This is a modular system that allows your to use an off the shelf light to build a pen light of the color and length you desire. Lights: There are two different lights you can…
I recommend to print both pieces with 0.25 nozzle and 0.1 layer height Then you will need to insert two 8 * 3 magnets in total in the middle of the print. I recommend inserting the magnets from the right direction. Happy printing!
There is a person at work who is always making a fresh pot of coffee, cleaning around the coffee maker, and generally powered by coffee. After seeing a coffee meme recently, it reminded me of this person so I thought I would design and…
This is an attempt to make a Certified True Copy stamp for office use. The body and handle would be rigid while the stamp head would be printed with a flexible material like TPU. Category: Hand Tools
This weeks 3D prop is a bow. The bow was such an amazing prop to see in person because there was so much detail and it was one of the props that inspired us to go for the life size 3D prints this season. We were able to capture the…
This is a replacement for the Certificate Lid for Miwa's great insert for Shikoku 1889. Print twice at 10% or 15% honeycomb infill with no top or bottom layers. This perfectly fills the space in the insert so that the game may be stored…
Cordless tool battery adapter. Ozito Battery to Certa tools ( I think this may be the same as the Matrix branded tools ), can adapt other batteries, just ask. Extra hardware spade terminal wire fuse terminals M3 x 10mm bolt bolt & Hex nut…
Hey Everyone, I made these for myself and co-workers to highlight that we were all certified Solidworks professionals! I've included two different models for printing: The .stl file can be printed in multiple colors by switching the color…
About This Guide This guide contains information, advice, and practice for becoming a Certified SOLIDWORKS Professional. Here, you will find: An overview of SOLIDWORKS Certifications Details about the CSWP Exam Advice on preparing for and…
On my Toyota Sera, my clutch pedal's cushion has long dried and crumbled away. I took some measurements and printed a TPU replacement to place on my pedal. It shares a part number with a wide variety of Toyota vehicles . Print in TPU with…
As you can see on the images this little thing can help you to fix a paper on a cork board without pinning the paper itself.
Jarre China Concert art no special requirements for printing This took about 12 hours to do in tinkercad Category: 3D Printing
The source marked this model as adult content.
Summary An example of 3D model generated with my Gugulele OnShape script… Decorative headless gourd shaped design Concert ukulele scale length Double rectangular through-body spine Single oval off center sound hole 'T' Bracing Tail-end…
Another version: https://www.printables.com/model/1237953-cpa-coffee-plus-alcohol
It is difficult to mount a focus motor on Lacerta Crayford focusers, because no free threaded holes available, but I figured out how to do so! This part grabs onto the housing of the focuser shaft, and holds the motor firmly in a very…
Hero 8 black mount for the Demibot with some durability improvements
DIY CTC stamper for office use. Print the head using flexible filament, make sure your stringing is tuned out before printing. Should some stringing occur use a hot air blower tip to melt them. The stamp has parts that slot in together,…
Cordless tool battery adapter. Xfinity Battery to Certa tools ( I think this may be the same as the Matrix branded tools ), can adapt other batteries, just ask. Extra hardware spade terminal wire fuse terminals M3 x 10mm bolt bolt & Hex…
Cordless tool battery adapter. AEG Battery to Certa skin tools Extra hardware wire female fuse terminal x4 M3 x10mm bolt & Hex nut x3 Assembly should be self explanatory, reach out if you need further clarification If you like this model,…
I've bought the prepared slides for microscopy here https://aliexpress.ru/item/4001085329229.html The slides came in the wooden box, but the incert (holder of the slides) was broken. So I made this incert. It is tight fit inside the box.…
A replacement for the original curtain glider and hook. This is a one-piece soluyion that can easily be mounted and dismounted without breaking any plastics. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
This beautifully designed tube is the perfect, official-looking container for Santa's most important documents. Whether it's the coveted Nice List Certificate confirming your child's excellent behavior, or an official, rolled-up Letter…
It fit perfect in gemstone box like this at amazon → https://www.amazon.in/Ssanvi-Gemstone-Jewellery-Storage-Suspended/dp/B0C8JSSHSG?th=1
Long term sufferer of mental illness here. There is chatter about the slightly enlarged hypothalamus. For bonus points find what is wrong with me. Anyways, have fun printing. Oct. 12 2017 added original MRI files so you can make your own…
Motivational note: I have a ‘SAD lamp’, that I use as an always on desk lamp, based on a Ø18" softlight. (Chroma Sky Portal 480+810) Since LEDs are only ~50% efficient, the panel generates waste heat; by my rough radiometric measurements,…
you need to print 2x token and card tray 1x train tray 1x token and card tray lid Category: Toys & Games
This is a custom designed holder made for climbing certification cards like the Swedish Topprepskort . It fits standard paper sized cards and keeps them secure and protected during climbing sessions. The holder is designed to easily…
Behold the ultimate 2025 holiday tech flex – a Christmas tree for certified nerds only! It looks like a cute little festive ornament at first glance, but oh boy, someone gave it a serious circuit board makeover. Instead of traditional…
Hello, Sharing my model of protection box / storage for 20x gold bars in Certipack. Fits certipack with dimensions around 55x85mm. Box dimensions: 136x63x89mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month…
my grandpa's old watch stopped working, its not something i wear on the regular so i didn't want to spend a lot on sending it to a repair shop and doing it myself seemed easy enough. after printing a few tools made by other i realized…
Take a look at my Patreon At Christmas, Santa checks who’s been naughty and who’s been nice with a list, a ledger and an elf on the night shift. A colossal operation, and it was missing just one detail: an owl. This one applied on his…
Recently bought a certified plastic shelf that, unfortunately for me, did not come with the clips needed to actually assemble the shelf. These 3D printed clips allowed me to still assemble the shelf without having to brave the blizzard…
Adaptor plate for SkyWatcher EvosStar 150ED and Lacerta Octo 2" rack and pinion focuser. Design files in Fusion 360 format and .step are included for remixes. I designed this adaptor to connect my heavy duty Lacerta 2" rack and pinion…
![Demibot 20deg Gopro Hero8 Mount [Certified Bando Proof]](https://media.printables.com/media/prints/400332/images/3336422_c3920e00-3c50-4ffd-815b-2049fcb3f0cd/20230216_110837.jpg)
