Search results: cew

Sort order

162 models

P
PrintablesGregzy

Cables raceway (duct)

A simple cable organizer when you really have to many cables to manage. The design is similar to what you can find in computer room (usually it is several meters in length and you cut it to size, but here we are limited to the print bed…

Downloads
2,801
Likes
772
Rating
4.96
P
PrintablesParagon

Cable Raceway Conduit - Listwy Elektroinstalacyjne

Do pobrania Listwy Elektroinstalacyjne, do maskowania przewodów i kabli, listwy dodaję o długości 250mm i w następujących rozmiarach wewnętrznych: 1 . Wysokość 10mm i szerokości ( 15mm, 20mm, 25mm, 30mm, 40mm i 50mm) 2 . Wysokość 15mm i…

Downloads
1,332
Likes
220
Rating
4.8
P
PrintablesHenlor

Creality K1 Cable Raceway Covers CAD

The step files is meant to be used as an asset in CAD software. But as it has a very simple geometry it can be printed in Vase mode. I added an optimized version for the vertical cover, cut in half and added an angle for the overhang on…

Downloads
1,218
Likes
248
Rating
5
P
Printablestimbarnes

Cable Raceway

UPDATED: A simple cable management raceway / comb to help keep wiring tidy. Designed in OnShape, based on a common wire management product. Top snaps or slides on to the comb / bottom piece. They can be easily cut to length as needed. The…

Downloads
1,143
Likes
121
Rating
5
P
Printablesjustin thursday

Cable Management Raceways

These are simple 20x20 cable raceways to clean up any kind of wiring project. They have holes for M3 screws to mount to to extrusions or you can use VHB tape to mount to a flat surface. I have .stls for 90mm, 110mm, 130mm, and 150mm. I've…

Downloads
982
Likes
258
Rating
4.78
P
PrintablesHenlor

Creality K1 MAX Cable Raceway Covers CAD

Huge thank you to @kukynas for adapting the step files to the K1 Max Dimensions. As it has a very simple geometry it can be printed in Vase mode. I added an optimized version for the vertical cover, cut in half and added an angle for the…

Downloads
906
Likes
185
Rating
4.89
P
PrintablesDMI

Iconic Yuri Gagarin Spacewalk Figurine

Commemorate one of humanity's greatest achievements with this highly detailed 3D printable figurine of Yuri Gagarin during his historic first Extra-Vehicular Activity (EVA). This model captures the iconic moment when the Soviet cosmonaut…

Downloads
370
Likes
116
Rating
5
P
PrintablesRustomac

Cable Raceway (Wire management) - Use with adhesive

Print recommendations: Print laying flat (not vertically standing up), as shown in the first picture. No supports Use double-sided tape, my favorite is 3M VHB.

Downloads
334
Likes
43
Rating
5
P
PrintablesUpdesky

Mount Panorama Circuit, Bathurst, Australia, racetrack, raceway, speedway

Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
300
Likes
19
Rating
5
P
PrintablesNastra

Creality K1 Cable Raceway Covers Bigger Version

A version that is larger than the standard cable raceway for more space

Downloads
290
Likes
49
Rating
5
P
PrintablesIsiTapier

sitting Dog by Tomasz Milcewicz

wings added from: https://www.printables.com/de/model/110583-desktophero3d-wings

Downloads
268
Likes
14
Rating
0
P
PrintablesPeter

M3 Raceway!

This is my submission to the mechanical marvels contest. These components all work in design. However I have not been able to 3D print them and test them in the real world. I live in Mexico and don't have access to filament down here. I…

Downloads
267
Likes
239
Rating
5
P
Printablesmrmatthorner

Cable Raceway Tray Desk Clamp

A c-clamp style cable raceway / tray which clamps onto a desk to hide cables. It features a dovetail on both the clamp and the raceway so they interlock and remain parallel with each other. The screw threads through the clamp and press…

Downloads
262
Likes
50
Rating
0
P
PrintablesMicro Center

Quick Access Desktop Cable Raceway

Quick Access Cable Raceway to organize your desk and computer cables. Can be screwed into a surface or attached using command hook/velcro/double sided tape. Very sturdy and easy to use. Printer Brand: Creality Printer: Ender 3 V2 Temp:…

Downloads
248
Likes
94
Rating
5
P
PrintablesSLICEWORX

Sliceworx Test Cube by GeekToyBox

Cubes Cubes Cubes! Everybody likes printing test cubes. But XYZ is boring! So we worked with Dom from Geektoybox (https://twitter.com/geektoybox) to create this model with our logo on it. Print it…challenge it…share it !

Downloads
247
Likes
39
Rating
5
P
PrintablesVuDu

Cable Channel Raceway (18mm x 16mm x 140mm)

A small cable channel/raceway 18mm x 16mm used to hide and run a few small cables on the side of my lack enclosure. You can change the height once you drop it into your slicing software. You can also combine a bunch of these to make one…

Downloads
234
Likes
39
Rating
5

LowRider 3 CNC - Large Drag Chain 90 curve raceway (SEE VIDEO: Large Drag Chain on both X and Y axes)

As shown and discussed in this video: As described in the video, attached are both printable files and editable SketchUp files. This content was previously exclusively for supporters on Patreon, but I did not care for the Patreon business…

Downloads
234
Likes
30
Rating
0
P
Printablesscrappy79

Cable Raceway

Made a cable raceway with lid, 250mm. Dimensions, outer: 40x31.5mm, inner: 36x28mm. Print with 4 perimiters, 15% infill and no supports.

Downloads
225
Likes
34
Rating
5
P
PrintablesDragonArtist15

Icewing Dragon Mask

Icewing dragon mask based on the "Wings of Fire" book series. I based the mask off of the official book art and descriptions of the dragon species. The mask is scaled to fit an adult head, but feel free to adjust for your own comfort. The…

Downloads
218
Likes
104
Rating
5
P
PrintablesAJDesigns

Better Cable Raceways

Better Cable Raceways Having built my first Voron V0 I was very disappointed with the traditional cable raceways which came with my build. I also tried to print many other styles however I was always disappointed with them as the legs…

Downloads
214
Likes
42
Rating
0
P
PrintablesMisterD

200mm x 20mm x 20mm Cable Raceway and Cover

As I was building my IKEA Lack enclosure/stand, I needed a clean way to guide the wiring along its backside so, I designed these. I've since printed several of these and they're so handy. They'll be used in many more places in the…

Downloads
200
Likes
15
Rating
0
P
PrintablesRawrll3D

Cable Raceway / Duct 250mm

I am currently working on an Ender 3 Pro Switchwire Conversion, using the Enderwire design from boubounokefalos. https://github.com/boubounokefalos/Ender_SW After printing my printable version of the lower deck for the Enderwire, I had…

Downloads
174
Likes
17
Rating
0
P
Printableselementalvoid

Cable Raceway - adjustable size, comb, screw holes

A cable raceway that can be easily adjusted using Fusion 360 Parameters. Parameters available: length width height screw hole diameter “screws every x” - create a screw hole every ‘x’ comb openings comb width - main comb opening width…

Downloads
173
Likes
30
Rating
5
P
PrintablesUpdesky

Watkins Glen, Dix, United States, racetrack, circuit, raceway, speedway

Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
164
Likes
15
Rating
5
P
PrintablesDirtClodimus

Hot Wheels Super 6-Lane Raceway Monster Truck Risers

My son loves the Hot Wheels Super 6-Lane Raceway track, but he wanted to be able to race Hot Wheels monster trucks down it as well. I designed these risers for the finish line to lift it high enough for the monster trucks to pass…

Downloads
155
Likes
18
Rating
5
P
PrintablesUpdesky

Sebring International Raceway, USA, racetrack, circuit

Sebring International Raceway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
148
Likes
17
Rating
0
P
PrintablesDaTePrisa

Hot Wheels Super 6 Lane Raceway hinge

It could definitely be improved but so far it performs as well as the original on the other side. You can mirror it to get both sides. Don't mind the color change, I tend to use the last meters of spools for prototyping.

Downloads
140
Likes
40
Rating
0
P
PrintablesUpdesky

Road America Circuit, Elkhart Lake, Wisconsin, USA, racetrack, raceway, speedway

Road America Circuit ,Elkhart Lake, Wisconsin, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…

Downloads
140
Likes
24
Rating
0
P
PrintablesAWT Works

Modular, Low Profile Cable Raceway with 3 Different Sizes

This is a low-profile cable channel designed to keep cables clean and organized. The slim design keeps cables hidden while staying discreet and easy to install. Currently included: Currently there's only the straight cable channels in…

Downloads
139
Likes
13
Rating
5
P
PrintablesUpdesky

Road Atlanta, Braselton, United States, raceway, racetrack, speedway, circuit

Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
138
Likes
15
Rating
5
P
PrintablesUpdesky

Masarykův Okruh, Brno, Czech Republic, racetrack, raceway, speedway, circuit

Masarykův Okruh, Brno, Czech Republic, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
135
Likes
8
Rating
0
P
PrintablesZeroFlo

Z-Axis Support for Leveling and tighten the scews on e.g. Anycubic Kobra

A Support to thighten the screws of the Z-Axis and support the weight of the Extruder, accordinbg to the Leveling of the Bed. I had the problem, that the weight of the Extruder pushed the right side of the Z-Axis-Bar down when i tried to…

Downloads
130
Likes
12
Rating
0
P
Printablesps915

Logitech C920 Universal Webcam Mount (Scews or 3M VHB)

I upgraded my camera for my Mendel90 (Octoprint). For mounting i used 3M VHB Tape You need: 3M VHB or some screw to mount 2x M3 Self Lock nut 1xM3x15mm (or longer) 2x M3x11mm (or longer) Please upload a photo of your make. This design is…

Downloads
129
Likes
24
Rating
0
P
PrintablesTuna

Cable Raceway for 2020 extrusion Ender 5 plus

The best way I found to print this is to do vase mode at .8 nozzle width (pictured). The model I uploaded is 100mm, but you can just change the Z scale to whatever length you need (pictured). Printed on CR 3040 pro. 0.4 nozzle 0.32 layer…

Downloads
120
Likes
24
Rating
5
P
PrintablesScott

Cable Raceway Customize Size

Load model into Fusion 360 and simply change the Width, Height, Length & Screw_Diameter in “Change Parameters”

Downloads
119
Likes
23
Rating
5
P
PrintablesBig B

Creality K1 max raceway covers

Thicker and deeper walls compared to original. I printed it on the build plate with carbon fiber pattern. If you can't print the long cover in one piece, just split it in half in your slicer. Printed in ABS. If you print with closed…

Downloads
119
Likes
21
Rating
5
P
PrintablesUpdesky

Brands Hatch, Fawkham, United Kingdom, racetrack, raceway, speedway

Brands Hatch, Fawkham, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
112
Likes
7
Rating
5
P

RaceWhoop 2 Inch AIO Mounting Hardware

This contains a modified Bottom Plate and a 45 Degree adapter to use an AIO-Flightcontroller in the 2-Inch-Racewhoop. The BottomPlate enables some airflow and allows you to use a 45-Degree AIO-Flightcontroller. Ideally you would cut this…

Downloads
108
Likes
2
Rating
0
P
Printablesgabi123
18+

The source marked this model as adult content.

Downloads
107
Likes
24
Rating
5
P
PrintablesGamerMechanic81

Laguna Seca Raceway Topographic Map

I used the website below to get topographic data and made a printable model then aded a track map made using illustrator, as well as the track logo. I know it should have weathertech, but space is limited, so there.…

Downloads
106
Likes
17
Rating
0
P
PrintablesGaius Pupus

Bosch Professional 18V 4x battery wall mount / holder with 3 scews (35cm long)

I have to use dowels for my wall mounting, so I made a bracket with only 3 screws for 4 batteries. What I could find was at least 2 screws per battery. Also, I didn't have much space in terms of width. I set 4 perimters arround the holes,…

Downloads
102
Likes
11
Rating
0
P
PrintablesMicro Center

Adjustable 2020 Extrusion Wire Raceway

Final Version - Adjustable 2020 Extrusion Wire Raceway Adjustable, scalable and improved Cable Raceway for 3D printer cables and wires. Reinforced over the old model , this one can be squeezed to be removed from the 2020 3D printer slots…

Downloads
100
Likes
9
Rating
5
P
PrintablesWolfgang J.

K1 Max raceway cover and chamber thermistor cover

Printed with ASA 0.2 layer in app. 25 minutes on the K1 Max

Downloads
98
Likes
21
Rating
5
P
PrintablesUpdesky

Tsukuba Circuit, Shimotsuma, Japan, racetrack, speedway, raceway

Tsukuba Circuit, Shimotsuma, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
95
Likes
9
Rating
0
P
PrintablesLaynor

25x18 | Cable Trunking, Cable Raceway | Goulotte | Joint Covers, Couplers | Caches, Raccords, Jonction

the size 25x18 is the outside of the cable trunking (consequently, the inner space of each joint covers) if there's a lot of downloads, i might consider building the 2 missings parts "90 OUT" & “END”

Downloads
94
Likes
7
Rating
0
P
PrintablesUpdesky

Sonoma Raceway, Sears Point, United States, racetrack, circuit, speedway

Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
88
Likes
13
Rating
5
P
Printablesgabi123
18+

The source marked this model as adult content.

Downloads
82
Likes
19
Rating
0
P
PrintablesStarfleet42

Rincewind the Wizzard's Medallion

This is my approximation of Rincewind the Wizzard's medallion from The Colour Of Magic (2008 miniseries). It's not perfect, as the included images are the best reference I could find. I was not sure what the 3 little bumps on each side of…

Downloads
81
Likes
9
Rating
5
P
PrintablesAudi

Rincewind Bookmark

The "Great Wizzard" from Terry Pratchett's "Discworld" series. I found the line art used to create this bookmark in a Google search. The line art did not acknowledge the work of Paul Kidby, but I think it is obvious that this (…

Downloads
80
Likes
12
Rating
5
P

No Scews Direct Drive Filament Sensor Mount For Ender 3

What else do I say? It's a no skews direct drive filament sensor mount for ender 3 that I remixed from 3d everything . Prints with no support (check photos for print orientation) and slides right onto the top extrusion. The slideyness…

Downloads
80
Likes
13
Rating
0
P
PrintablesUpdesky

Mosport International Raceway, Ontario, Canada, race track, circuit

Mosport International Raceway, Ontario, Canada, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…

Downloads
78
Likes
5
Rating
0
P
Printablespaoloronco

Cable Raceway organizer v2

Cable raceway to better organize your cables can be printed in <1hour May require supports Suggest to print it vertically °90

Downloads
77
Likes
18
Rating
5
P
PrintablesUpdesky

Pista di Fiorano, Italy, racetrack, raceway, speedway, circuit

Pista di Fiorano, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
74
Likes
3
Rating
0
P
PrintablesUpdesky

Goodwood Circuit, United Kingdom, racetrack, raceway, speedway

Goodwood Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
72
Likes
2
Rating
0
P
PrintablesAdam

Outlet In-Use Cover with Raceway Cutout

This in-use outlet cover which mounts on top of a Decora faceplate. Just remove the existing faceplate screws and replace them with a pair of 6-32 x 1.5" oval head ones. As it rests on the existing faceplate, the back doesn't actually…

Downloads
72
Likes
33
Rating
5
P
PrintablesViper Worx

Printable Cable Raceway/Trunking

Printable Cable Raceway/Trunking for cable management - Limited Sizes, but should a specific size be needed, drop a comment here and I will size and upload.

Downloads
69
Likes
23
Rating
5
P
PrintablesUpdesky

Long Beach Street Circuit, United States, racetrack, circuit, raceway, speedway

Long Beach Street Circuit, USA on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
66
Likes
13
Rating
0
P
PrintablesAtjornov

Voron 0.2 (V0.2) Cable Management Raceways

Shorter cable raceways (70x12, 90x12, 90x20) are screwable to DIN cleats with self tapping screws (2.0x10 or similar). Longer 130x20 rail was screwed directly on rear panel Mounting of rPi and SKR Pico was done with DIN cleats (by VORON…

Downloads
61
Likes
13
Rating
0
P
Printablesnikoh

1015 Raceway Conduit Corner

A corner piece for the excellent 10x15 raceway conduit created by Paragon here: https://www.printables.com/model/24746-cable-raceway-conduit-listwy-elektroinstalacyjne

Downloads
61
Likes
17
Rating
0
P
Printables3dcdesign

Stream Deck Cover/Custom Facewplace (Elgato 15 Key Stream Deck)

I designed the Elgato Stream Faceplate to be a quick and easy print. Then allowing a great way to personalize your stream decks a bit more, but also add a bit of protection. Minor supports required depending on orientations or print type.…

Downloads
61
Likes
8
Rating
0
P
Printablesps915

Logitech C270/310 Universal Webcam Mount (Scews or 3M VHB)

I upgraded my camera for my Mendel90 (Octoprint). For mounting i used 3M VHB Tape You need: 3M VHB or some screw to mount 2x M3 Self Lock nut 1xM3x15mm (or longer) 2x M3x11mm (or longer) Please upload a photo of your make. This design is…

Downloads
61
Likes
9
Rating
4.5
P
PrintablesModel Magic

Space Transport Vehicles - Orion Cew Module - 2014

Space Transport Vehicles - Orion Cew Module - 2014 3D printable model.

Downloads
60
Likes
11
Rating
0
P
PrintablesUpdesky

Circuito Ascari, Málaga, Spain, racetrack, speedway, raceway, circuit

Circuito Ascari, Málaga, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
56
Likes
8
Rating
0
P
Printablesmeagerfindings

40x20x10 REMIX of J-Channel Cable Organizer, Holder, Management, Raceway, Hanger

Shorter remix of a very useful J-Channel Cable Organizer

Downloads
56
Likes
7
Rating
4
P
PrintablesCattus Printus

15mm wrench Nut for @Cewo Drill Stopper

This is a remix for @Cewo Nut for Drill Stopper with flattened sides for 15mm flat wrench. Please visit his profile to get rest of parts for this Drill Stopper. Flat sides are generally easier to grab. Helpful if the nut would get stuck…

Downloads
55
Likes
9
Rating
0
P
PrintablesCattus Printus

22mm Wrench Nut for @Cewo Drill Stopper ø6.5-ø13 mm

This is a remix for @Cewo Nut for Drill Stopper with flattened sides for 22mm flat wrench. Please visit his profile to get rest of parts for this Drill Stopper. Flat sides are generally easier to grab. Helpful if the nut would get stuck…

Downloads
54
Likes
13
Rating
0
P
PrintablesJanis M.

Mützenhalter für Lamellenwand Slatwall Spacewall POS Store

Mützenhalter für Spacewall Lamellenwand. Der Kopf braucht nur mit wenig Infill gedruckt werden. Den Halter habe ich mit 3 Wänden und 30% Infill gedruckt. Hat holder for Spacewall slat wall. The head only needs to be printed with little…

Downloads
53
Likes
5
Rating
0
P
PrintablesAinon3Dtisk

Discworld Wizard Rincewind

Hello, I have Rincewind from Discworld for you. A very nice character from Terry Pratchett's book. Nice for display and coloring. My kids love these characters. Good luck with the printing! I used PLA/PETG as the material. Need to use…

Downloads
51
Likes
8
Rating
0
P
PrintablesUpdesky

Thunderhill Raceway Park, Willows, USA, racetrack, speedway

Thunderhill Raceway Park, Willows, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
51
Likes
5
Rating
0
P
PrintablesLyricon

Box for drill stoppers (by @cewo) (2.5-8mm)

After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. Since I used the same basic box sizes for both sets, this one has 2…

Downloads
47
Likes
13
Rating
5
P
PrintablesICEWING 177

Icewing(Wings of Fire)

An icewing from Wings of Fire! I'll release a version with joints soon! Category: Creatures

Downloads
44
Likes
7
Rating
4.5
P
Printablesnoble69

Voron 0.2 Integrated Cable Raceway

To get the best layer adhesion I printed with PETG at 0.1 layer height and extremely slow at 15mm/s for perimeters. You must drill new holes in the back panel to accept screws on the top portion of the track. Can be used with or without…

Downloads
43
Likes
9
Rating
0
P
PrintablesUpdesky

Atlantic Motorsport Park, Lower Sackville, Canada track, circuit, raceway

Atlantic Motorsport Park, Lower Sackville, Canada on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…

Downloads
43
Likes
5
Rating
5
P
Printablespaoloronco

Cable raceway organizer - remix

Remix of cable organizer A Cable raceway to better organize your cables From the original model it has been elongated. Printed in 1 hour PLA 215c - 60c Creality Ender-3 v3

Downloads
42
Likes
9
Rating
0
P
PrintablesValleyGeek

10mm Cable Raceway Cover Plate

A basic termination cover plate for 10mm cable raceway to hide an odd shaped hole. The plate is 60mm square (2.3in) with screw holes in each corner. I replaced the old 12v lighting in an old RV with LED strips and used this to cover the…

Downloads
42
Likes
10
Rating
0
P
PrintablesUpdesky

Snetterton, Norwich, Norfolk, United Kingdom, racetrack, raceway, circuit

Snetterton, Norwich, Norfolk, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
39
Likes
4
Rating
0
P
Printableskitlaan

D-Line Medium Cable Raceway Tee

For use with D-Line 1.18" (W) x 0.59" (H) Cable Raceway. Design Notes ID 15mm (aka OD of raceway) 40mm leg length (aka 80mm total width) Example printed in PETG (0.4mm nozzle, 0.2mm layers), with one of the leg faces aligned to the bed…

Downloads
37
Likes
5
Rating
0
P
PrintablesUpdesky

Autodromo dell'Umbria, Italy, racetrack, raceway, speedway

Autodromo dell'Umbria, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
36
Likes
2
Rating
0
P
PrintablesNoronus

under desk scew or glue headset holder

It's a holder for your headphone to screw or glue under your desk If someone wants the design files, dm me. (I made all my models in OnShape)

Downloads
35
Likes
3
Rating
0
P
PrintablesKurtM

Willow Springs International Raceway

Willow Springs international raceway Category: Art

Downloads
35
Likes
4
Rating
0
P
Printablesapelsinapa

Precision scewdrivers holders

The original case broke a long time ago - and i had an ugly fix. These drivers is going into a drawer now, as a backup set, so i needed a way to keep them together without taking much room. The drivers snap into place, and don't slide…

Downloads
35
Likes
6
Rating
0
P
PrintablesUseful Items

Articulating Wings of Fire IceWing Dragon

IceWing/NightWing hybrid. Always print with supports, and I recommend using mouse-ear brim on the wings. Also, do not scale down, joints may break. Prints on two plates, and neck to head joint is a bit fragile, so be careful removing…

Downloads
34
Likes
16
Rating
0
P
PrintablesLyricon

Box for drill stoppers (by @cewo) (6.5-13mm)

After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. I've printed this with some generic PETG on a Bambu Lab P1S using the…

Downloads
32
Likes
8
Rating
5
P
PrintablesDr_Eamy

Clan MacEwen Crest Badge Reviresco

MacEwen crest The file MacEwen-Clan-Crest-Badge-Reviresco-door-large.stl is about 16,5cm x 22 cm and usable as a door emblem. file-data: It took 07:42:36 to print, and 29.69m filament. estimated weight 89.26g true it was 83.2g The file…

Downloads
31
Likes
2
Rating
0
P
PrintablesLGworkshop

Plugmold raceway endcap

I bought a clearance power strip at HD, it sat for a while, when I went to install it, realized it had to be hard-wired. I didn't have any easily accessible locations, so I decided to just connect a heavy duty 14-gauge appliance cord ($8)…

Downloads
31
Likes
1
Rating
0
P
PrintablesTrey

TV Cable Raceway

Hides your tv's cords. 220mm long sections. update 2025. I added two files for double stick tape. material_saving_solid_cord_cover_backplate.stl and flat_cord_cover.stl. They have the same profile geometry. The "retaining plate" would go…

Downloads
30
Likes
4
Rating
0
P
PrintablesW6IWN

Chameleon Antenna CFM34 Srcew On Base Cap

Print with PTEG filament. Apply 3/8-24 thread heat insert with soldering iron. Be sure to press in enough that the cap with screw flush to the mast. Check while still hot incase any adjustments need to be made. Don't forget to unplug your…

Downloads
27
Likes
3
Rating
0
P
PrintablesRodrigo Sclosa

4inch Racewhoop Pro

I decided to design my version of the amazing FreeZillion 3 inch Racewhoop, but in 4 inch. Thanks to FreeZillion ( https://www.thingiverse.com/thing:4608171 ) for inspiring this project. I've attached the full project from Fusion 360 if…

Downloads
27
Likes
1
Rating
0
P
PrintablesAdam Swint

Deep Forest Raceway (Gran Turismo)

This is Deep Forest from the Gran Turismo series (Specifically GT4) More original GT tracks to come! Requests will be considered, however as a novice and hobbyist nothing is guaranteed. Feedback welcome! Print Settings Printer Brand:…

Downloads
27
Likes
4
Rating
0
P
Printablesgillis

Raceway

A raceway for Print instructions Raceway! A raceway for https://www.prusaprinters.org/prints/46970-build-and-have-fun-2 See also https://www.prusaprinters.org/prints/46972-raceway-60 See also the raceway scaled to 60% to fit common metal…

Downloads
26
Likes
5
Rating
0
P
Printablesatvfool

Spike for Bytcew Pickup Telescopic Pole

A spike to shove in the ground for this pole(affiliate link) . It should slip over the base once the handle is removed. See also the guying ring I made to fit this pole.

Downloads
26
Likes
2
Rating
0
P
Printablesatvfool

Guy Rings for Bytcew Pickup Telescopic Pole

A guying ring for this pole(affiliate link) . It should slip over the 5th or 6th section from the bottom snugly. The outer holes were designed for regular 550 paracord. See also a spike made for this pole to help keep it in place.

Downloads
24
Likes
3
Rating
0
P
PrintablesAirTrash

Legends Ultimate Arcade Raceway Cover ALU

ATGames Legends Ultimate Left hand USB Extension Cord Raceway Cover. Slip Fit. AwesomeSauce Rules!

Downloads
23
Likes
1
Rating
0
P
PrintablesSwimfar

Clips for Raceway Crown Molding Cove Lighting

Clips that will pull Raceway Crown molding tight to the wall when they are screwed into the wall below the mounting brackets. These clips are for the 5-3/4″ Classic Colonial Profile. They may not work with other sizes. But the same…

Downloads
22
Likes
13
Rating
0
P
Printableservys

Scewo parking sign

Stl is in proportion 1:1.For printing I reduced it to 48% in the slicer so that the printout would fit on the mat.

Downloads
22
Likes
2
Rating
0
P
PrintablesAdam Swint

Mid-Field Raceway (Gran Turismo)

Mid-Field Raceway from Gran Turismo 4 It's a wonderful circuit and will make a wonderful print! Print the logo, print the display piece, print just the circuit, do whatever you want! Thanks for looking. More to come? Category: Games

Downloads
22
Likes
6
Rating
0
P
PrintablesARt

Faceware Iphone XR Mount

Mount to use the iphone xr with the indie faceware headmount system designed an alternative headmount holder for the xsens indie helmet - https://facewaretech.com/cameras/indie-headcam

Downloads
20
Likes
1
Rating
0
P
Printablesjuditech3D

Boitier de remplacement (émetteur) Niceway WM006G

J'ai réalisé ce boîtier, ne trouvant pas de boîtier de remplacement pour ce type d'émetteur de la marque Nice (Niceway WM006G). J'ai dû adapter les dimensions pour l'impression 3D, tout en me rapprochant de la conception originale, pour…

Downloads
20
Likes
2
Rating
0
P
Printablessimi_mini2020

Scew holder - BIG

this is model that i made in race with my firend to see who can obtain printer sooner (he is going for Bamboo Lab) pls

Downloads
20
Likes
8
Rating
0