The source marked this model as adult content.
- Downloads
- 5,110
- Likes
- 779
- Rating
- 4.94
573 models
The source marked this model as adult content.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Moses by Michelangelo Repaired for 3d printing. Minor fixes to base and a few holes in mesh.
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…
There is a model of a Statue of David by Michelangelo, in Florence, Italy.
Recommended Print Settings Print Layers: 0.15mm Infill: 15% Color Bottom Layer (mm) Top Layer (mm) Red 14.25 15.05 White 13.25 14.25 Blue 12.20 13.25 Gold 11.50 12.20 Light Blue 9.50 11.50 Grey 7.50 9.50 White 0.00 7.50
This is a lowpoly remix of Michelangelo’s sculpture of David from "Scan The World" The .gcode file has fairly robust supports because the model is pretty tall and skinny, but they come off easily enough and don’t leave a mess behind. Feel…
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…
Hello friends from all over the world :) This is my first 3D-model on printables. A friend of mine has the original Prusa enclosure for his mk3s+. With the air filtration system and the LED strip, there are a few wires to guide along…
Die Teleskopringe sind zweiteilig und gedacht für Teleskope mit 200mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder kleiner und alle Gewinde M5…
H0 scale - Electric large Substation Grande Sous-Station Electrique échelle H0 120x80x40 mm
Ersatzteil für Klappstachelreihen Klammer vom Geschierspülmaschine von Siemens. UPDATE 17.09.2023: Klammer wurde überarbeitet.
Recommended order: Black, Dk Gray, Gray, Light Gray, White. Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the MK3 jogs after a change it will spit…
I was invited to a bachelor party and I did not want to go empty-handed, so I saw a pattern on the Internet and drew a set like in the first photo from scratch. I bought the helmet and the hose (for contact with food) in the store, the…
Michelin Bibendum puppet. Designed by Vvardloc and uploaded here with their permission. To properly print it rotate it sligtly to the back and add supports. This creates the best results. If anyone has any questions please contact me,…
MICHELANGELO TMNT REMIXED
The source marked this model as adult content.
Commercial licence I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH A compact Springfield Echelon slide-action…
https://creativecommons.org/licenses/by-sa/4.0/ https://it.wikipedia.org/wiki/Piet%C3%A0_vaticana#/media/File:Scan_the_World_-_Piet%C3%A0_(Michelangelo).stl
Scale to prefered size
I reimagined Michelangelo's David through a 3D project, complemented by a column with an Ionic-style capital serving as its base. This endeavor aimed to enhance the presentation and aesthetic appeal of the iconic sculpture. In…
Bust of famous David statue by Michelangelo. “Cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899” Make this the artpiece of your livingroom or office. Scale in your slicer…
This is a model by mitchellharvey on Thingiverse. The model can be found at https://www.thingiverse.com/thing:526825 and their profile is at https://www.thingiverse.com/mitchellharvey .
I downloaded it from 3dvia warehouse in .obj. format. After i opened it in NetFabb and modified the scale , finally exported in .stl format. Here is the original file link: http://www.3dvia.com/models/23C848192B3D0F21 happy printings…
A new 3D figurine generated by AI, Bibendum Michelin. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Quick clamp for protective tube pluggable expandable for protective tube Quickschelle für Schutzrohr, Rohrschelle Print instructions Category: DIY Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15 Infill: 15% Filament:…
photo a titre indicatif, le socle et le grognard ne sont pas fourni avec me contacter si vous les souhaitez
Quick clamp for protective tube Klemmschelle für Schutzrohr Printing information Layer height: 0.32mm (0.6 nozzle); 0.20 (0.4 nozzle) Infill: 15% Support: none Brim: recommended I am looking forward to your Makes! :-) If you like this…
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
The B-25 Mitchell was a Second World War American medium bomber and gunship, which entered service in 1941 and remained active in some capacity for almost 40 years! The J variant was one of the last factory produced models. This kit was…
This is a remix of: http://www.thingiverse.com/thing:657397 . I edited the original with MeshMixer ( http://www.meshmixer.com ) to make it 3D printable. MosesStatueRemeshed.stl is smaller in data and is easier to slice. I filled the holes…
Thank you for downloads, likes… Enjoy !
Hallo, ich habe hier für eine eBike Bosch Mini Remote BRC3300 ein Reparaturschelle konstruiert. Das Original ist leider gebrochen, ein Ersatzteil gibt es vom Hersteller nicht. Gedruckt in PC ist es stabiler als das Original. Auf der…
Altura Recomendada 150mm Diseño Conceptual El modelo presenta un diseño estilizado inspirado en un personaje de anime, destacando detalles como la ropa y accesorios específicos que reflejan un toque moderno y juvenil. Uso Este modelo está…
Not my model, just an upload from here .
This is little Chelsea fc display you can put under your TV while supporting Blues. :
The model without magnet insert can be resized as you like. For the model with inserts use 6x3 magnets.
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
michelin style planter created in fusion 360 a planter inspired by the michelin man :) dimensions > height: 100mm · diameter: 125mm photos show printed in matte white pla 0.20mm layer height 10% cubic infill note > it includes drainage…
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes! The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) . The rim…
Amazing detail in this model by Chelsea Creates Things. Supposedly can print with no supports… I didn't have luck and so this was my first print with the new organic supports.. pretty cool…
This cable mounting-clip has been designed as an alternative to the expansive ISO equivalents available in all the hardware stores. It contains of two parts: The Base (12x23cm): The inner width of 8x16mm is suitable for most screws. The…
English I needed a pipe clamp for a 50 mm pipe. As I do not have Fusion 360 to change the parameters of the original Model, I redesigned the clamp (without interlocks) for my needs (50mm pipe). No supports needed. I printed in Prusament…
A great Wall Art of Michelin's Bibendum. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Michelangelo`s eye of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
Schelle für leichte Beanspruchung wie beispielsweise für Kabelführungen oder Absaugschläuche Auf Anfrage kann ich gerne weitere Durchmesser hochladen
This model is compatible with the lego system.
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
[v3.1 description]. This has become a bigger project. There are about 50 enhancements now, and I vow to stop tweaking it NOW. See the v2.0 description below for why and what I originally modified, but another pass has finally made me…
A re-shape, with more details, from the amazing work done by 3DWP . Dimensions now are about 83x57x200mm, and i've correct some detail and mesh errors. My model (in photo) it's about 350mm in height, keeping the aspect ratio.
The Blues! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I…
Altura Recomendada 150mm Concepto del diseño El diseño de este modelo 3D está inspirado en el personaje ficticio de una chica aventurera y audaz de un entorno fantástico, reflejando elementos de mitología y exploración a través de su…
Les colonnes Morris et leurs affiches de spectacle sont présentes depuis le XIXe siècle dans les rues de Paris. Les colonnes Morris deviennent très rapidement des éléments emblématiques du paysage parisien. Depuis leur création à Paris,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I liked the original design but wanted to have it a bit wider
Rohrschelle für DN50 Rohre für Wandmontage mit 4,5 mm Senkkopfschrauben. Der Abstand zwischen Wand und Rohr beträgt 25mm. Falls sich die Mutter nicht in die Aussparung stecken lässt, erhitze die Mutter mit einem Fuerzeug oder Lötkolben.…
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
Schellen 10 bis 50 mm in 2 mm Stufung für Spax-Schraube Kann für viele Reparaturen verwendet werden. Materialwahl je nach Verwendungszweck Spax-Schraube 3 x 15 bzw. 3 x 20 mm Kein Floß, kein Support. Schichthöhe 0,2 mm bis 0,3 mm…
Michelangelo`s eye of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
BMW Part No.: 34527664098
Kabelschelle Kabelklemme in verschiedenen Ausführungen für z.B. Lautsprecherkabel, Verlegekabel, Modellbahn,... Es handelt sich um eine sehr dünne ausführung, bitte beachten!. Die Standartvariante hat eine Wandung von 1,5 mm Die thick…
This is the size I'll be using with my Dodge Ram remixed body ( I'm going to re-remix this body but that's another story !) The tire prints without supports and without infill when put on the side. With TPU (depending on the brand) it…
Adaptation d'un 3D trouvable sur le web mise a l'échelle. Correction des erreurs. création d'un socle a thème.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
David Statue Extrudr Green-Tec Pro white 220/60/0,2, 3 shells, 15% infill
Rambarde de type Compagnie du chemin de fer du Paris Orléans Réalisée d'après photos Impression filament Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No Category: Buildings & Structures
It's just a simple rerailer that's been redesigned for easy printing without supports. Tested on Peco Code 100 track. Ok for all printers. ---------------------------------------------------------------------------- Il s'agit d'un simple…
David (Michelangelo) statue Image by wikipedia.org Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
TMNT set Fortnite (Donatello, Michelangelo, Raphael,Leonardo)
Clamp for fixing a 20mm cable pipe (Installationsrohr, Panzerrohr, Kustoff-Stangenrohr) on walls or ceilings. There are two versions, one ordinary and one with support for a 10 mm c-profile-rail. Print instructions Use uv stable filament…
OK so this one has also been sitting in my hard drive for a long time, never had the time to get her right. Did a couple of passes on her and added a base, should be pretty decent. I definitely want to work on her a bit more some day, but…
The agent Raze (from the game valorant) satchel ability. This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project.…
50mm Pipe Holder für selbstdichtende-Blechschrauben
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
15mm Clamps for the pneumatic pipe system from Schneider AIRNet
Model od https://www.myminifactory.com/object/3d-print-michelangelo-s-david-in-florence-italy-2052. Dejte si pozor na podpěry, hlavně na loket.
German: Ich habe ein Laufgitter für Babys und kleine Puppen konstruiert. Die beiden Füße müssen mit Kleber befestigt werden. Englisch: I designed a playpen for babies and small dolls. The two feet must be attached with glue.
Wäscheleinehalter für Rangiergriffe vom Wohnwagen
Eine Eichel lag schon Länger bei mir zuhause und lag nahe sie mal zu scannen und Ihr ein Innenleben zu schenken. gedacht ist Sie als Geocaching Behälter. Der Ring an der Großen Version ist zum Aufhängen. Beide Versionen sind mit…
Customizable coaster for your wedding/bachelor/bachelorette party. Two 3mf files were provided so you can quickly print a standard design. The Fusion 360 files are provided so that you can easily customize the text that appears on the…
Michelangelo`s mouth of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
Lowered poly count and fixed base.
Idee zu dieser Rohrschelle war, die vorhandenen Metallrohrschellen der Warmwasserleitung durch Kunststoffschellen zu ersetzen, um die Wärmeverluste zu veringern. Das Unterteil wird auf ein M8-Gewinde geschraubt. Die beiden Schellen werden…
Print at 300 degrees (I was too lazy to pre-rotate it) with supports and brim. Also works as adhesion test for your printer. Update: don't drop it loaded, print cracks between layers.
Please use PETG, as it can bend slightly when the pipe snaps into place. Bitte PETG verwenden, da es sich beim Einrasten des Rohres etwas verbiegen kann.
Material: PLA+ Druckereinstellung: Layerhöhe 0,20 mm / Infill 15 % / No Support Kein zusätzliches Material erforderlich / no additional material required Alle Rohrschellen aus meiner Konstruktion sind kombinierbar/All pipe clamps from my…
H0 scale LED street light - Single swan's pass You will also need 5mm mini LEDs with 2 wires and 6mm aluminum pipe Lampadaire LED echelle H0 - Col de cygne simple Vous aurez aussi besoin de mini LEDs de 5mm avec 2 fils et du tube…
English: Open the model in FreeCAD. Adjust the dimensions using the “Spreadsheet” (see drawing for name assignment). Click on the model and export it as STL. Deutsch: Modell in FreeCAD öffnen mit dem “Spreadsheet” die Maße anpassen (Siehe…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
1:24 scale model of an archelon, a large extinct species of turtle. The model features detailed scale and skin texturing along the model. I created two pose variations of the model. I recommend printing it at a finer layer height or with…
Ich habe die Muschel mit Stützen und 0.16mm gedruckt. Natürlich ist es eventuell möglich dies auch ohne Stützen zu drucken. Die Perle ist 15mm im Durchmesser. Diese kann gerne im Slicer auf verschiedene Größen Skaliert werden. :) Die…