Less chunky screw for Flexible & sturdy phone arm
Cut the thumb grip in half to shorten print time and clean up the look a bit. Printed in Overture Matte Black PLA with no supports on my mini.
- Downloads
- 449
- Likes
- 78
- Rating
- 4.67
228 models
Cut the thumb grip in half to shorten print time and clean up the look a bit. Printed in Overture Matte Black PLA with no supports on my mini.
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…
ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…
Just a big ol' fat chunky tablet stand that will also probably hold your phone. Print instructions stl should be in correct orientation, prints on side. I used 20% infill, layer height up to you!
who doesn't know it? you always have to dig around in the Chunky Flavour to find the spoon and end up with sticky fingers. That always bothered me. That's why I created this spoon holder so that the spoon is always within easy reach. The…
This planter features an awake cat, diligently guarding your plant. Resembling a chunky cat lounging on its back, it not only assists in caring for your plants but also appreciates being placed in a sunny spot, as the cat enjoys a warm…
Simple hook that attaches securely to paracord. Tested a hook printed in PLA with 100% infill with a 40lb bag of salt. It held up fine. I wouldn't trust this for climbing or anything but for most camping purposes this will be plenty…
This knitted-style hippo is an adorable addition to your collection. With a round body and cozy knit-like details, it's the perfect decoration for any space. The model prints easily with minimal supports. The eyes are printed separately…
Sollte die größe nicht passen einfach 1% größer oder kleiner Drucken.
Imprints clay with a chunky weave texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Wenn du nicht jedes mal deine Finger beim Löffel rausholen in Pulver baden möchtest, ist das die Lösung. Passend für die 150g Dose. Einfach und schnell gedruckt. Falls die Reibung nicht ausreicht, dass der Halter nurch durch eindrücken…
Ramalamas have bearing wobble issues, Clees are bulky and not sleek, so….. Chunky ALPACA! A hybrid between all the amazing things Rama and Clee.
🦎 Articulated Axolotl – Chunky Flexi Creature Meet your new desk companion! This chunky articulated axolotl is designed in a smooth vinyl-toy style, perfect for fidgeting, displaying, or printing in your favourite colours. With its clean…
****Find all of my exclusive content on my Thangs.com profile **** This chunky Venom kit is roughly 5.75 inches (14.5cm) tall once assembled. Shop the filament we used in this model on our Amazon Storefront As with all of our models, this…
How to and schematics in progress! WARNING! This is a pretty advanced build! You have to know your way around with soldering lots of tiny and fragile wires, electronics etc. There is no programming involved but you need a steady hand and…
A pencup for the pen cup competition that looks like its a 3D-print in process. Greatly inspired by 3D Gloops! "Chonky 3D Print Example: https://www.printables.com/model/72548-chonky-3d-print-example/files The nozzle and “cup” should be…
Chunky knobs made for a snug fit with M8 hexagonal bolts or nuts. Modelled to work best with normal DIN standard fasteners (13mm across flats and head height 5-6mm to 6.4mm.) Initially made for using with the partially-threaded bolts…
This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…
Make sure die diameter of your Chunky Flavour is about 83.8mm Support is recommened
A sleepy articulated panda designed in the signature Zap 3D Creature Club style ⚡ This chunky little panda features smooth rounded shapes, subtle 3D print layer detail, and satisfying articulation for the perfect desk companion, shelf…
Löffel und Einsatz für Chunky Flavour von More Nutrition 90 g Dose Man findet viele Einsätze für die 150 g Dosen, aber nicht für die 90 g Dosen, die wir haben. Deshalb habe ich einen neuen Einsatz designt. Der Löffel ist ein Remix von…
This is the original model scaled up 192% - which was the largest I could fit on my Prusa Mini. Also cut off a bit of the top to create a wider opening for ease-of-use watering/planting in it. It still prints perfectly with no supports on…
Basic Chunky Tire with several sizes of rims. Scaled for 1:16 models.
Want to sell prints of this model? A commercial license is available on my Patreon: https://www.patreon.com/Elizabeth3D Like my free models? Support me on Ko-fi: https://ko-fi.com/elizabeth3d The Chibi Tank is a chunky, cute battle tank…
🦥 Articulated Sloth – Chunky Flexi Creature Slow things down with this chunky articulated sloth , designed in a smooth vinyl-toy style for satisfying movement and easy printing. This model is part of my growing Zap 3D Creature Club ,…
Model Introducing the Chunky Jewelry Tray, a blend of modern design and functionality inspired by the innovative style of Gustaf Westman. Crafted to elevate your jewelry organization, this tray is a striking addition to any vanity,…
Knitting loom for making chunky knit blankets. Approximately 6 feet long. Helps loops stay uniform in size and knitted rows remain tight. These blankets can take some time to make and this loom helps make sure you don't loose track of…
My wife fell in love with this adorable ceramic pot, so I recreated it for all to enjoy! 😍 I made sure that the recessed spots for the eyes and mouth are flat. This makes it simple to attach them using a Loctite type super glue. Use…
I ordered some ESP32's and printed the Chonky case without measuring. It seems the boards I received with USBC were about a milimimeter longer than the boards from the original chonky case. 51.75mm long boards Of note it seems the status…
UPDATE 5/6/24: Adjusted the OLED cutout in the lids to align properly with the actual OLED. Should be fixed. Removed the sandwich and top mount versions. UPDATE 2/13/23: I added a 5x3 version of the gasket mount case. This is a high…
Beautiful Chunky Bracelet - Voronoi Style Category: Bracelets
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I also did a “fuzzy skin” on the one in the photo. Same as my other model , but with bigger triangles. Same story. Don't resize . If you want custom sizes, send me a message. Slicing Instructions: There are hairline gaps in strategic…
A nice chunky bangle / bracelet, very forgiving and easy to print in various sizes. Designed by S. Bellwood and digitised by myself
To adjust the wall thickness, open pot.blend in Blender and set the “Thickness” of the Solidify modifier applied to the “Chunky sitting pot” object. I use a boolean modifier with a cube to “open" the top of the solidified pot so you may…
Revival of my small but still handy 2017 project from Thingiverse. Quickly 3D modelled (in Fusion 360) chunky rocket – designed for rapid 3D printing thanks to "vase mode" (Cura) / "spiral vase" option (Slic3r). Print instructions Rafts:…
🦎 Articulated Axolotl Blue – Chunky Flexi Creature Meet your new desk companion! This chunky articulated axolotl is designed in a smooth vinyl-toy style, perfect for fidgeting, displaying, or printing in your favourite colours. With its…
Designed in the art deco style, this looks equally good as a faux marble corner decor. Adds a touch of elegance :) The ceiling piece could look equally as good on its own as a corner decorative piece. All pieces are flat in back and would…
Design Concept The Chunky Penguin Keychain features a cute, cartoonish penguin bundled up with a scarf and earmuffs, ideal for spreading winter vibes. Use This keychain can be a charming accessory for your keys or bags, making it perfect…
Put a tiny rope through it's legs to soak up water.
At the time of this upload, the single STL file from the source print had both the base and lid in one model, but the lid was floating above the bed preventing proper print orientation. I used PrusaSlicer to make cuts to the original…
have a smaller sized build print on my printer, but the side piece have dovetail joints to make them secure with a 2 piece print. This requires no fasteners to assemble, just a few taps with a dead blow hammer will press the mortise and…
This is Chunky the multifunctional tent peg Of course it is only a peg if you add the metal wire nail. It is designed to work with cheap but big nails with a diameter of 6-7.8mm. Bought pegs are weak, expensive or don't fit my needs.…
Ben & Jerry „Chunky Dunky“ Nike Dunk Low
This cute little pot prints easily with no supports.
Fresh from his nap and already judging your snack choices. This pocket-sized cave troll waddles around with a club the size of a carrot and a heart of… well, stone. Set him on your desk to guard dice, keys, or cookies; he’ll scowl at…
Just a simple peg you can hand-screw into the ground. Standard print settings apart from… 5 Walls 30% Lines infill Slow 1st layer (I used 20mm/s and then 60mm/s for the rest, 60 being my printer's max) Support “everywhere” with overhang…
Sturdy version of http://www.thingiverse.com/thing:779159 . Walls thicker. Battery compartment for 8x AA batteries (lasts longer then a 9v cell, use rechargeable batteries to not exceed the 12v max). Foldable legs. Reset button is flush…
****Find all of my exclusive content on my Thangs.com profile **** Expecto pachunkus! This chunky Harry Potter kit is roughly 6.5 inches (17cm) tall once assembled. Shop the filament we used in this model on our Amazon Storefront As with…
1:1 Kopie des originalen Chunky Flavour Löffels von More Nutrition mit exakt identischem Füllvolumen. Ich habe meiner Freundin Halter für die Scoops in den Dosen gedruckt, leider sind bei vielen Dosen die kürzeren dabei, welche dann in…
Chunky letter magnets for the fridge. Designed to use 6mmx3mm round magnets (the ones I happened to have at my work bench). These fir pretty tight and probably won't need glue, your milage may vary. I have uploaded both individual STLs…
Another fun citrus slice. This one a powerful kitchen or play magnet, with the magnets hidden inside the part. If you haven't hidden magnets; it's easy! Program in a pause in your slicer at to drop the magnets in at 4.2mm Program a…
****Find all of my exclusive content on my Thangs.com profile **** This is the way. This chunky Grogu "The Child" kit is roughly 4.6 inches (12cm) tall once assembled. Get the matching Mandalorian Chunkable! Shop the filament we used in…
Introduction This planter features a chubby dog, peacefully lying on its back while keeping your plant company. With its round belly up and paws relaxed in the air, the dog looks completely at ease, just waiting to soak up the sun. Though…
a cool chill CHONKY cat that will chill and pretend to play games with you
Single unit 18650 battery holder to make custom trays any size. It has big, chunky dovetail interlocks that are more forgiving on FFM printers. I printed these without supports, but you can if your printer doesn't bridge very well. Print…
Tired of digging through powder avalanches to find your scoop? 😅 This holder is designed exactly for the new MoreNutrition Chunky Flavor jars – because all the models I found were either too big (for the large jars) or made for the old…
This holder is designed to fit into the new cans of 150g size (2025) with a opening of 81mm. It got some features: three noses to fixate the holder-ring in the can-opening designed the plane to hold the spoon in place left a hole in the…
A simple, sturdy holder for the ratgdo v2.53i. Made to fit my specific garage door opener, but it should be versatile enough to work with quite a few setups. I've included the step files in case adjustments to the clip are necessary.
I have a few years of experience working in 3DS Max and I have recently been learning Zbrush. I saw Prusa's guide on sculpting a baby dragon and thought I'd do my own take on it:…
Quick remix of the excellent Gridfinity USB A&C Holder with a little more clearance for your chunkier devices
A stunning statement necklace that fits snugly around your neck with its sleek conical shape. The necklace is flexible, without any need for joints, hinges or chain links. It comfortably will hug your neck. This necklace is easy to print,…
shelf support/brackets to fit in with my other workshop item designs. these are a left and right bracket and are capable of supporting a fair bit of weight. I printed them if sunlu PETG with 50% infil and they have held up well for over a…
A complete A–Z chunky alphabet charm set designed for multi-color 3D printing. These rounded, cute letters are perfect for creating personalized keychains, bracelets, necklaces, zipper pulls, bag charms, name tags, and DIY crafts. Package…
Disclaimer: This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…
A complete A–Z Cute Chunky Alphabet Charm set designed for multi-color 3D printing. These rounded, cute letters are perfect for creating personalized keychains, bracelets, necklaces, zipper pulls, bag charms, name tags, and DIY crafts.…
Just playing around in OnShape, I decided to try my hand at a gyro fidget spinner. My students love 3D prints this year and this makes a great prize for the prize bin. Prints in place, the diameter of the largest circle is about 35mm and…
Chunky Crab Planetary Rim - 1:16th Scale Uses M2 and M4 screws Basic Chunky Crab Planetary Tire with several sizes of rims.
Fantastic hook modelled by Tmpx64 ! Print Solid, 100% infill in PETG - Scaled in height and thickness to work with my heel forks and heel weights. 1cm thick, 2inch x 1inch. Please download the original model as well!
Remix of bpmarkowitz's tablet stand for laser cutting. Works with tablets and phones. Print instructions Cut as many slices as needed, and fix together with an M3 bolt. (I used 9 x 3 mm MDF, which leaves just enough space on a 30 mm bolt…
The alpaca logo is too big and I prefer the Voron logo. I measured the covers with a caliper, so hopefully they will fit you. I printed them from Devil Design ASA and they fit perfectly.
Bogart the Toad – A Chunky Little Friend Meet Bogart the Toad , a delightfully chonky amphibian who’s ready to hop into your heart (and onto your shelf). Whether you need a desk buddy, a lucky charm, or just an excuse to print something…
Charming 3D model of a Bulldog, ideal for decorations, gifts, or collectible displays for dog lovers. Designed for smooth and reliable printing on FDM and resin printers with a stable pose and refined shapes. Scales nicely and may require…
Just a goofy little thing I did in blender using sculpt mode.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
200X150 storage box with carry handle. 6mm hinge and handle pins and 3mm latch pins. I use Bamboo dowel for the pins. Tolerances are high so printing with any filament is OK but some sanding will be required to fit the latches as they are…
Just a less-wobbly quick fix for when the vent switch keeps coming off the screw for the vent itself. As always, please refer to the original COREBOXX documentation for installation and print settings.
I found this attractively-designed bee on Thingiverse just after buying my first 3D printer. At the time, I only had white filament so I had to colour the coloured bits with Stabilo permanent markers! It came out pretty well but I wasn't…
Non binary chunky cute dragón with a wide smile and small fringe. He's blue and I like to call him Beto. Get all the non-binaries!
These models are part of the Chunky Tool Wall Collection . Collect 'em all! These are Nx1 Gridfinity baseplates for an IKEA SKÅDIS pegboard. They tilt the bins forward so you can see what's in them and get it out. They have color accents,…
This chunky mini dragon features a stout body and simplified details for reliable printing. The model is shown with visible layer lines and an amateur desk environment to reinforce its printed realism. Powered by MakerWorld – Image-to-3D…
I would recommend printing this at around 50%-75% speed.
Loved the original design but I wanted it to be a bit chunkier and with more chamfers. This has taken away some of the flex the original top had and the top now has a tighter fit. I have also included an updated step file as the original…
Run a loop of rope thru the hoop & hook the loop over one of the hooks to use it as a tensioner like a Loop Alien
Gridfinity 1x1x2 for 3 big usb sticks. I have some old and oddly Chunky usb dongles, they wont fit if they are too close to other usb thingies, so I made this special holder for 3 of them. The fit for the USB plug is no snug but not loose…
Chunky Style container with screw Lid, Large thread for Strength and style.
This is a stylus I made for my wife. She wanted a more ergonomic stylus than the usual stick types. The parts screw together with the joiner, and there are four styles to choose from, so you can mix any combination. Print with at least…
I needed a hook to hang up my motorcycle helmet and couldn't find a design I liked. This one was based off the size of my helmet, but should work for anything you need a big chunky hook for. Now with tweaked curvature, no supports needed.…
Human skull I modeled in Blender for practice, I've made several paracord bracelets with them, the hole is oversized enough that a couple cords will still fit, even if scaled down significantly, the purple skull was printed at 100% scale
Embrace the bold, unapologetic heft of our Rugged Brew Bastion—a 3D-printed sentinel for your caffeine conquests, forged in matte slate gray PLA that dominates the counter like a minimalist monolith built for the wild. This isn't your…
A fresh modern looking bin for multiple uses. Use it for storage. Use it for a trashcan (fits 2.5 gallon bags snugly stretch bag slightly). If you like this and would like to support my work making these models, you can tip me at:…
This is a very ugly, lumpy grip for the Analogue Pocket. It was made by mashing clay around a dummy Pocket, scanning the resulting shape using photogrammetry, then mirroring and lightly cleaning up the mesh in Fusion 360. I sculpted the…
Created using ZBrush Sculpt thumbnail created with canva Say hello to Zippy the Blue-Roar & Chunky Chomp — two lovable, 3D-printable dinosaur buddies perfect for your shelf, desk, or kids' room! These dino pals are packed with charm and…
This model is part of the Chunky Tool Wall Collection . Collect 'em all! This holds the Dewalt DCD777 electric drill on an IKEA SKÅDIS pegboard. It orients the screwdriver handle out, so it's ready to grab and use. I modeled this in…
Xshot Longshot Chunky Collet Much stronger than the original.