37 models
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
So this is most likely the greatest desktop organizer invented, it has an attachable trapdoor for the back compartment, inserts for USB, SD, and micro USB cards, and its super cool. The compartment trapdoor must be printed on the print…
The spout has an opening with a diameter of 5 mm. If you store sauces or dressings in the bottle, it is wise to print food-safe. Please read this information: https://help.prusa3d.com/en/article/food-safe-fdm-printing_112313 No support is…
Uzavíratelná klec. Vhodná do vodních filtrů do akvárií na filtrační kamínky.
Simple round box, printed in 0.2 layer height
A closable air vent designed for 120mm computer fans. It's a three-piece design that requires no support material. You can use four M4 bolts to attach the whole assembly to a fan or case. Support If you'd like to support me for the 3D…
Using the Polyphemus "as is" is quite disconforting. I wanted to improve usability. Putting the whole lid + expansion to pieces, I assembled it in reverse, putting the expansion on the top, and not the bottom. I modeled the frame part so…
PETG seems to hold up the longest, so I suggest printing it with that. Use Voron standard print settings for best results (no higher than .2 layer height or the snaps will not work). The tabs can be cut off to make end pieces. Each…
This is a configurable riser/top-hat for the SOVOL SV08 printer. In its basic form, it has four corner pieces (labeled) and four vented panels. The panels include an optional slider to open and close the vents. The optional/replacement…
Simple closable hideout for a young snake. Can be opened by spreading the holds from the sides. It is better to hold also the bottom to avoid sudden movements, if the snake still remains inside. But I strongly suggest to do it without the…
Remix / inspired from ErikRudec ( https://www.thingiverse.com/thing:3450378 ) Since I moved the touchscreen from the front of the enclosure of my Snapmaker to the top, I was looking for somthing to cover up the hole when I'm milling but…
The procedure is attached in pdf. Attendance required: -Screw M4 length 12mm (the screw is on the photo) -Nut M4 In order to keep the stand from slipping, it is a good idea to glue on rubber feet. It is of course possible to add text to…
Disclaimer: I did not print this, so I can't guarantee, that it will work. The cylinders to make it stackable might need to be glued to the bottom of the box. All of the parts need to be printed with some kind of supports.
-- EN version -- Closable ventilation grid with honeycomb design that conceals the air blocking mechanism, and a diffuse air exit. Easy assembly with built-in screws in the front. Rotary knob for easy adjustment of air flow. Designed to…
This is a simple manually closable cat door for a 39mm thick door. The store bought cat doors had lockable flaps, but since our cat is usually free to roam the entire house, only on rare occasions we close off one room to the cat. This…
Closable Ashtray Model by Dipling on Thingiverse. Original link here: https://www.thingiverse.com/thing:4758457 I did not create this model, if you would like to credit the owner please go to the link above and do so there. Thanks! I…
This modified corner fits perfectly on K1 Max without needing to remove the foam from the lid
English: Want a nice corner bracket which can be closed to hide the screws ? Here is one. Comes with two holes for 4mm diameter screws. Fusion and Step files included to make it easier to modify. Recommanded print setings: 0.2 mm 33%…
This riser lifts the top cover allowing it to stay on the machine keeping drafts out while venting heat to allow printing PLA or TPU. It also allows you to close the vents to contain the chamber heat for other filaments like PETG, ABS,…
A container with a lid or sliding cover—for example, for small screws, bolts, or anything else. / Zamykany/zasuwany pojemnik np na drobne śrubki, wkręty co kolwiek
An EU power socket cover together with a fitting lid to close it off (e.g. for protection from pets ;)). The lid should snap fit in closed position. Both parts printed for me in roughly 50 minutes with 90 mm/s speed. Lid with 0.2mm layer…
To assemble the box you need 6pcs of M3 30mm screws. Simple printing. Wide use of the box
This is a hood cover for the qidi-X-Plus with closeable 50mm hose connector and screw mounting. For mounting it is necessary to melt 3 threaded inserts M3x5,7 (number A and B). The two inserts under number A will still protrude approx.…
A closable air vent with hexagon pattern designed for 120mm computer fans. It's a three-piece design that requires no support material. You can use four M4 bolts to attach the whole assembly to a fan or case. If there's too much or too…
Hi, this is my selfmade box which you can close completly. The outside diameters are 80/80/80 (mm). I printed it with 20% infill whithout any build plate adhesion but I used supports so it works seemlessly. And its dust proof! (I have…
Lid tolerance is about 0.1mm. I've printed using creality k1 and it is working ok. Display cover has to be glued. Apply glue only to outside area. I've printed from ABS and used acetone to glue cover.
Přidání dalšího typu víka - Addition of another type of box lid
An easy to print parametric gridfinity box. If you need a Variant I didn't export you can open the FreeCAD project file, edit the Variables (x, y and z) in the VarSet, and export the Parts once they've been re-generated.
A two piece aeropress filter holder that closes snugly and meshes together. There's a circular cutout on one piece letting you easily take filters out and a matching circular key on the other, so they always close the same way. I've had…
Container with vent, made to contain eggshells for compost/nutrients. The container was originally made with vase mode, but 1.5mm doesnt look great with 0,4mm nozzle, and vase mode cant make holes for the screws Handle for the…
Assemby of computer fan to make intake vent from 120mm computer fan. Note you need power supply and fan for project, but this works. :) Low voice and good venting compared traditional units. Closable lid enables also full closing by…
can somebody print this i dont know if it fits and i dont have a 3D printer so can sombody please print this so i can know if i have to adjust it please let me know
Vent system for the Qidi Plus 4 Supports to build plate on “handle covers” M3 cap head and flat head screws 4020 fan 40x40X20mm PETG, ASA, ABS etc. (No PLA)
