952 models
Here is my design of a happy cloud lamp - the cute little light for your toddler! The lamp will cast a shadow of the stars to the ceiling (see pictures). You won't need anything but an LED strip as additional hardware for this lamp, also…
55mm x 40mm or 2.1in x 1.5in (6mm keyhole)
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Easy to make a cute Clouds and Rainbow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
The lamp cover dims and shades the white light of the Ikea UPPLYST cloud lamp. It's designed to snap onto the mounting plate. The LEDs have 1-2cm distance to the cover to prevent it from getting hot. When mounting the lamp to the wall,…
The bridges are now 40mm instead of 140mm which was never a problem for my Prusa i3 or MK4. I normally print them with PETG (Cloud Keys can get very hot) in 0.3 draft mode with 15% InFill and never had any problems.
Easy to make a happy Plane and Cloud keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
OnShape model: https://cad.onshape.com/documents/e575f295105d8e9e32a6bc56/w/313938088c26a895e167df17/e/4262aab72ff56fb5d56f9058
Easy to make a happy Cloud keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
A raincloud wind chime. Raindrops are used instead of rods Can also be used as a baby mobile The raindrops can be printed in three different sizes, with three of each size in a single print. The raindrops are printed in spiral vase mode…
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
My very first model that I made using Womp 3D modeler. Cute little desk accessory.
Wall art: Dragon in the clouds (four colours)
Introduction: Electronic waste (e-waste) is a huge global problem, posing troubling environmental threats. Waste mobile phones are a big part of e-waste, mainly due to extreme demand & short product life-cycles. While older smartphone…
Wall art / fan: Dragon (two colours) You may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model | Printables.com Important: This fan is 2 mm thick, so you need handle with a 2.5 mm gap!!!
Use PLA. 3pcs horisontal walls.
Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed…
This is a model of Final Fantasy 7 Cloud Strife in simple polygon form. When I printed it I scaled the model to 15%. Some of the additional files I attached have already been scaled to match that 15%. This also includes: Buster Sword (to…
He may be a baby, but don't be fooled, he's pretty big. This design is easy to print in any material, 100 percent print in place with no assembly - Almost entirely rebuilt from a past design of mine. (Commercial licence is only for…
The bracket of my HyperX Cloud 2 headset broke, so I modeled and printed a new one.
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
I printed it with 1.6mm shell thickness and 10% infill. The holes for wall mounting are 350mm from each other. For bigger printers with 400x400mm print beds I uploaded a single piece model and a slim version. UPDATE The slim version can…
The Cloud Gateway Max gets hot! Do not print in PLA!
Light up your room with a bang! This striking 3D printed mushroom cloud captures the iconic explosion shape, designed to sit perfectly over a standard LED tea light. Whether you're into science, statement décor, or just cool night lights,…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
He’s definitely going to need supports, and I also recommend scaling him up nice and big before slicing if you want stability and the fine details. Have fun with this, and if you want to see more, give a like and follow me. If you have…
cloud box modular and with optional magnets to lock into position this is a modular design that consists of: base (use of 4mmx2mm magnets optional) main insert · 3 options secondary insert · optional pen holder (use of 4mmx2mm magnets…
cloud box modular and stackable through magnets check out companion model cloud organiser · modular this is a modular design that consists of the boxes themselves, lid, and as options you have feet and inserts. the stacking between the…
A set of cloud bath bomb molds with a flat bottom for adding embeds. Free to print for your own personal use! If you just want to buy this mold, I have it for sale here: https://chunkadust.com/products/cloud-bath-bomb-mold If you'd like…
Perfect fit for SKÅDIS mount for Ubiquiti Unifi Cloud Gateway Ultra. Does not block any I/O. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No support needed Printed with PLA with default setting
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
cloud box · XL modular and stackable through magnets ~assembled dimensions in mm > x: 125 · y: 155 · z: 70 this is a modular design that consists of the boxes themselves, lid, and inserts as options. the stacking between the boxes and lid…
We are excited to introduce the new model for the Xbox Series X! As always, you do not need any support to print both parts. Installation on the console is straightforward and does not affect airflow. All buttons and slots are accessible.…
Based on different existing models Can be printed without supports Uses 4 DIN 7991 M3-16 Screws and 4 M3 nuts
cloud pen holder with optional colour insert dimensions in mm > x: 93 · y: 83 · z: 91 photos show printed in easywood pla by FormFutura 0.20mm layer height 10% adaptive cubic infill notes colour insert is optional for a bit of contrast…
Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests. I used 12mm x 2mm magnets. They are press fit for me, but used some CA glue to keep them in place permenantly. Trim off the tabs on the perimeter used to…
To be able to pump up the CloudCuddle bed for on the go, a special adapter for the air pump is needed, which is not supplied with the tent or pump anymore. This connector solves the need to buy it seperately with shipping costs, etc.…
Works great with my other panels :)
A 10" 1U rackmount for the UCG-Ultra with three keystone slots.
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…
A simple skin for Lucky 13 - Cloud Strife, Final Fantasy 7. Only three parts - his hair, shoulder guard and the buster sword. The hair I remixed from this model: https://www.thingiverse.com/thing:3393568 The hair is quite a complex piece…
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
This design is a cloud. If you want to make adjustments or make other things out of it, you can certainly do so :)
Inspired by these shelfs: 1 , 2 . My design have same cloud effect of toilet papers, but using less material and faster print. Designed to be able to print on Prusa Mini (max dimension: 180mm). I used double sided tape to attach to the…
my original clamps started to break after changing the head cushion. So tried my luck with one from printables the original was pretty good only a bit to loose and I had trouble getting the cable behind the aluminium frame. I made the…
It's easy to print, with brim and without supports. I recommend a 0.2mm layer height.
Cloud printed in three parts, joined with a dovetail. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 10% Filament: EcoPLA by 3DJake PLA Category: Household
Cloud Cookie Cutters - 4 different sizes Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Filament: Unknown PLA Category: Kitchen & Dining
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
Simple, easy to print cloud. 2D, no supports needed. Just a very simple cloud “icon”. Enjoy!
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
I reuploaded the files, so you no longer have to print each part individually, but can now print several parts simultaneously! Thank 16-year-old me for that conundrum. Use two mid-sections per pole.
STEP files are provided and here's the Onshape link if you want to edit any of the dimensions:…
Use M3 x 12 flat head screws. They will bite and thread into the plastic. The tolerances are tighter than the OEM part, resulting in less side to side movement, and a much stiffer snap when adjusting size.
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
This model will work for both left and right sides of the headset. You have to replace both the front and the back of the hinge for each side that you want to replace as it will not mate with the existing shell pieces. Also, for the back…
A set of 2 small clay cutters perfect for creating ear rings, pendants or even buttons from polymer clay, ceramic or porcelain. One size (25mm), mirrored. Best printed solid with a 0.4mm nozzle in PLA.
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
UniFi Cloud Key G2+ runs quite hot especially with large hard drive inside ~ 51 C. I've created a mount case with 120 mm cooling fan. Now the temperature is about 37 - 38 C which is optimal. Print instructions No supports 0.2 mm layers…
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
Unifi Cloud Key Gen 2 Plus 1U 10" Rack mount. Printed i PET-G.
Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Simple cloud toilet paper holder Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 25 Notes: I recommend at least 25% infill Category: Bathroom
Practical toilet paper holder on the wall. For greater security I recommend holder screwing into the wall. Printer:MK3S+ Material: white PLA
Openscad Cloud. Size can be adjusted Category: Other
This duct can be used with fiber lasers with threaded bases. The mounting holes span between 100mm and 112mm. It works great on Cloudray and Gweike fiber lasers. It adapts to a quick-disconnect duct. The magnets are 12mm x 8mm N52. They…
You need to print this with supports. It was originaly designed to showcase the combination of PETG supports and PLA model. It works great. Same set up as if you printed with water soluble supports (PVA) - no gap between the model and…
Cloud decoration for use at parties, baby showers, or other events. Doubles as a phone stand that can be given as a party gift or keepsake at the end of the event. STEP file included to be able to modify/emboss text in design. I embossed…
My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…
My Unifi Cloud Gateway Max sits on my desk. I noticed the aluminum bottom for heat dissipation gets rather hot. To help the heat dissipate and save space on my desk, created this small little vertical stand. One side of the stand I…
Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…
group of stl (remixes and originals) to decorate my kids' room all decors can be attached to the wall using hot glue all can be printed using pla and in different materials - we usually use spares ones pls note for grass you can use…
Stronger Version of the Cloud Shelves I've seen on here… Can be printed in PLA and not bend under the immense pressure of all you Butt Wipe! Mines been up for a year and still holding the Poopy Paper High! Happy Printing!
// [UPDATE] July 2025 - Left Shell v2 - Thin wall fix -Minor fix to remove artifacts due to thin walls. There is still a small area around mic connection that has a thin wall, about 1 layer. This fix should allows the print to continue…
Tired of watching your graphics card slowly strain your motherboard? Introducing an adjustable support solution designed to meet your needs, complete with a versatile clip for attaching any design you desire! If you print the AMD logo,…
This is a matching shelf for Unifi Cloud Gateway Ultra. Fits with the lenovo tiny shelf, my TrendNet mod and my FritzBox mod. Printed with 10% infill and supports (slicer complains without, but I don't think there really are supports)…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
Can be added directly to an existing keyring or get some keychains here:…
A 10 inch rackmount for unify clout gateway ultra particularly stable Flat base on the front of the housing Integrated space for housing feet Precise fitting of the housing Clips to prevent it from being pushed out Printing possible…
3D Printed Motherboard Stand: Introducing My latest addition a meticulously designed motherboard (MB) stand, perfect for CPU miners Or open PC frame. This stand isn't just a functional piece; it's a testament to thoughtful design and…
Raining cloud printed by Prusa i3 MK3s. When your home plants need to water by naturally way. Print instructions The first step is to glue the two extruded parts together.Put a suitable rod into the side hole on the holder. Then place the…
Fan cooler adaptor base for the Western Digital "My Cloud Ex2 Ultra". Smart HDD temp indicator (without fan cooler powered): 52°C Smart HDD temp indicator (with fan cooler powered): 30~35°C Description: Fan height 15mm I designed a…
Most mounts I could find for the Cloud Key Gen2 variant involve two brackets, both of which are screwed down. I want to be able to remove the cloud key without the use of a screwdriver and with as few holes drilled into my walls as…
Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.
If you have a 3D printer you can make this to streamline your Glowforge laser hose connection to your AC Infinity CLOUDLINE S6, Quiet 6” Inline Duct Fan. Get rid of those tacky metal adapters and tape. Fits snugly on S6 fan and there is a…
My small tribute to a role in Kate Bush's music video for "Cloudbusting" performed by the great Donald Sutherland, who passed away a few days ago. His father character has always made me warm and fuzzy inside:…
Akatsuki cloud cookie cutter - Cortador de galletitas de nube Akatsuki
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Stitch Marker for knitting. Does not have a slit. Suggested equipment, material, and settings: Nozzle: 0.25 mm Material: PLA Layer height: 0.1 mm Number of perimeters: 2 Printer used for prototyping: Prusa i3 MK3S
![Nuclear Mushroom Cloud [LED Tea Light Candle Lamp]](https://media.printables.com/media/prints/31e2a408-92ed-4a28-b631-50eb7b55efb5/images/11370644_a9f10dcc-a7c4-4900-85b0-fa63ab774bed_b6c9da68-4faa-41e2-bf43-23b9d5400c9a/l-1.png)
