Search results: coleman

Sort order

137 models

P
PrintablesGenCab

1:10 - Scale Coleman Cooler

1/10th scale model of a Coleman cooler for use as a prop or accessory. Because reasons! This is a remix of OMW2FYB's work whom remixed from Schlauncha and I believe that is a remix of someone else work. I simply prepared this for a single…

Downloads
1,191
Likes
240
Rating
5
P
PrintablesBarry Willick

Coleman Cooler Hinge

This is a print-in-place hinge for Coleman coolers. The “PIN” version is designed to have the same opening stops that the original hinge and the “CONE” version stops at 90 degrees to reduce the stress on the screws holding the hinges on.…

Downloads
821
Likes
78
Rating
5
P
PrintablesSchmidt

Hinge for Coleman Cooler

I made this for my friends cooler which had busted hinges (very common) before I borrowed it. It works. The version I installed was printed in the orientation designed, with 5 external, 25% infill. Requires support because of the holes, I…

Downloads
625
Likes
374
Rating
0
P
Printableszeroprints

Coleman Butane Adapter

I bought a Coleman butane bottle but the nozzle didn't fit anything I owned. This nozzle fits a TOPKAY torch lighter, but is also fit a different Lotus butane lighter I had as well.

Downloads
540
Likes
21
Rating
3.67
P
Printablesmpatl

Coleman Drain Plug Replacement

Complete drain plug assembly for a Coleman Xtreme cooler. The original Coleman design is just a push fit plug but the drain body exposes a bit of thread which could support a threaded plug. This is what I decided to make. This particular…

Downloads
466
Likes
21
Rating
0

1:8 scale camp stove like coleman

nozzle: 0.4 parts: M2 x 4mm ( visual gas cap) M2 x 8mm M2 x 25mm

Downloads
376
Likes
114
Rating
4.89
P
PrintablesEnoch

Coleman LED Lantern Knob

If you have this lantern, the knob will break. Pay close attention to orientation of the "double" switch design of the lantern. I believe this is a better design, and an example of what would be a challenge for injection molding.

Downloads
268
Likes
10
Rating
5
P
Printablesthall72

Lego Compatible (13197.dat) Minifig Head Modified SW Coleman Trebor

This model is compatible with the lego system.

Downloads
220
Likes
47
Rating
0
P
PrintablesDarbooka

Propane tank heater stand for Coleman 1lb tanks

Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…

Downloads
210
Likes
17
Rating
5
P
Printablesmuddymaker

Coleman Powerhouse Dual Fuel Lantern Travel Case

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Powerhouse Dual Fuel Lantern Travel Case. Hardware…

Downloads
207
Likes
41
Rating
5
P
PrintablesDDDavid

Coleman drain hole plug (Screw)

This kit is to replace all the part from the original cooler Coleman drain plug. I made the design to used the original gasket to prevent leak. You can print the gasket in TPU or maybe use a gardenhose gasket. Personnally, I printed it in…

Downloads
201
Likes
24
Rating
5
P
Printablesrebeltaz

Intex Pool Skimmer Adapter for Coleman Pool

I bought this pool skimmer from Amazon for my pool. This particular model is designed for use with Intex pools that have a through-the-wall, screw type pump port. Coleman pools, unfortunately, do not. This adapter is inserted into the…

Downloads
198
Likes
26
Rating
5
P
PrintablesDDDavid

Simple Coleman plug for cooler. TPU

To replace my broken plug on my coleman. Printed in TPU

Downloads
197
Likes
26
Rating
5
P
PrintablesNerdMomma

1lb Coleman Propane Base

Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden

Downloads
184
Likes
20
Rating
4
P
Printablesmltriebe

Retro Coleman Ice Chest

This is a remix of a file I got from Thingiverse, I sized it up 300% and added the Coleman logo. I used Hatchbox white PLA, Silk Silver, Bambu Lab Metal Green PLA, and Bambu Lab Basic red PLA. The logo was printed with a .2 nozzle to get…

Downloads
173
Likes
88
Rating
0
P
PrintablesKevin Claypool

Coleman Mach centrifugal blower wheel 1472a1191

This is a blower that I dimensioned as a direct replacement for the Coleman Mach 8 1472a1191 centrifugal blower fan. These fans are prone to drying out, becoming brittle and throwing shrapnel into your A/C unit. Good to have one on hand…

Downloads
163
Likes
56
Rating
0
P
PrintablesWayne

Coleman/Fleetwod Bed Slide end caps

Bed slide wedge and rail cap for Coleman popup campers. Remixed file to fit a flat head bolt as I feel it would have more strength over the factory tapered one. I also modified it to fit the end rail as well. I've included the flat and…

Downloads
148
Likes
8
Rating
0
P
PrintablesPrinterPatrick

Benji Coleman Schedule 1

This is Benji Coleman, he is not a cop and will not snitch on you. --Created with Meshy

Downloads
141
Likes
3
Rating
0
P
Printablesrebeltaz

Larger Hose Holder For Coleman Above Ground Pools

When I saw m99's pool hose holder , I was struck by the genius of that design. Why Intex (and other pool manufacturers) thought it was a good idea to have the pump hoses coming of the sidewall of a vinyl pool with no support whatsoever,…

Downloads
132
Likes
18
Rating
0
P
Printablesmuddymaker

Coleman Dual Fuel 533 Stove Travel Case

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Dual Fuel 533 Stove Travel Case. Hardware required;…

Downloads
131
Likes
26
Rating
0
P
PrintablesScubaSteve

Coleman drain to Intex Pump fitting

Adapted so it would connect to the drain fitting on a Coleman (year 2020) pool so it could be connected to the backwash line. How used: Disconnect Intex discharge (backwash) line Connect adapter to pool Connect discharge (backwash) line…

Downloads
120
Likes
16
Rating
0
P
Printablesmlerley

Towel hook for Coleman/Bestway above ground pool

This is a simple towel hook that hangs off the top steel rail of a Coleman Power Steel pool. I designed it for my 22' pool but I imagine it would fit other sizes as well assuming the top steel rail is the same shape and size. Printed in…

Downloads
118
Likes
18
Rating
5
P
PrintablesHulsten

Coleman Cooler Hinge

Are you guys in for a treat… My team has been in the lab cooking up some of the most cutting edge innovation, sadly we cannot show you those until next quarter (pending). However, what we can show you today is another quality of life…

Downloads
113
Likes
30
Rating
4
P
PrintablesRichards Makes

Tarp Awning hook for Coleman popup

We bought a used pop-up camper that didn't come with an awning. After watching this video We made some adjustable PVC legs and printed these hooks to make a cheap tarp awning. Printed with Orange Hatchbox PETG Sliced with Prusa Slicer…

Downloads
112
Likes
17
Rating
0
P
PrintablesAndrew

Coleman Cooler Plug with Strap

Print in a flexible filament like TPU. https://cad.onshape.com/documents/c4b0301bb931b140648883c3/w/3a9e5ce6a0f532bb646d12ec/e/061bd83916be84db296c48cb?renderMode=0&uiState=68232b27aa2cdf3d6ef3f73e

Downloads
108
Likes
3
Rating
0
P
PrintablesSuspect

Coleman Xtreme5 Cooler Handle

Lent the cooler out and it came back with a broken handle. This model re-uses the “nubs” that hold on the original handle. It functions the same as the original - can be rotated around etc. Printed in PETG. I have lifted the cooler up…

Downloads
108
Likes
9
Rating
5
P
PrintablesRed Haniwa

Coleman pump adapter

Simple adapter for my battery operated Coleman pump. There are 3 test models: top test: The top is small and require adequate cooling. try printing this to see if your fan speed % is good enough. 24.8 and 25.2 base test: Print these out…

Downloads
107
Likes
9
Rating
0
P
PrintablesMupshot

6inch wheel collection coleman cooler

Lost the wheel and axle assembly on a fishing trip. this not only made it cumbersome to move the cooler, the wheels act to stabilize the unit. Its a decent cooler and I couldnt toss it in the dumpster just because I lost the wheels.…

Downloads
105
Likes
6
Rating
0
P
Printablesjrsone

Coleman Camp Stove Leveling Feet

These prints fit over the stamped feet ‘humps’ on the bottom sheet metal of the Coleman Triton 2-burner stove, so that it can be leveled when placed on a campsite picnic table. As you may know, campsite picnic tables are never level to…

Downloads
95
Likes
25
Rating
0
P
Printablesperson001

Coleman triton series 5461 control knob

A control knob for Coleman Triton series 5461 camping stove. I printed it with a 20% infill and used some epoxy to help hold it on. It has a gap but it functions.

Downloads
86
Likes
4
Rating
4
P
PrintablesCraig Robinson

LCD Screen Shade for Kandi and Coleman Golf Carts

Introducing the LCD Screen Shade for Kandi and Coleman Golf Carts 3D Model: Elevate your golf cart experience with our meticulously designed LCD Screen Shade, tailored specifically for Kandi and Coleman models. This innovative 3D model…

Downloads
84
Likes
5
Rating
0
P
PrintablesStele

Coleman Event Shelter Foot

We lost a foot of our Coleman event shelter, so I remodeled one. It's almost a one to one replica, apart from thicker walls for additional strength.

Downloads
79
Likes
11
Rating
0
P
Printablesmstejska

Coleman Event Shelter Centre Bracket

gcode 10 hours is without brim gcode 12 hours is with brim

Downloads
76
Likes
11
Rating
0

Mini Coleman Chiller Koozie without the Lid - Coke and Diet Coke Theme

This is my version of the Mini Coleman Can Koozies, this one is done without a lid, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a…

Downloads
73
Likes
13
Rating
5
P
PrintablesMaksym

Parametric nozzle for high-volume inflators (Ryobi, Bauer, Coleman, Makita etc)

This is an attempt to create a parametric (customizable) OpenSCAD nozzle for the Ryobi high-volume low-pressure inflator that can be adjusted to work with a particular inflatable. The tip that comes with Ryobi is about 7mm, while most of…

Downloads
72
Likes
4
Rating
0
P
PrintablesSoloTSi97

Coleman Cooler Lid Prop

I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this. The prop was designed to fit onto the front lip of the…

Downloads
70
Likes
7
Rating
5
P
Printables3D-ARC@Riaan

Large Coleman Cooler Box Hinges

Fusion 360 file provided, if you need to make changes. I printed this with SBS material on my Creality K1. If you find your bending section cracks, then thin it more. currently it is 1,5mm thick where it bends.

Downloads
69
Likes
9
Rating
5
P
PrintablesIllusionistPM

Coleman Propane Stove 5400A700 Replacement Knob

This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…

Downloads
68
Likes
5
Rating
5
P
PrintablesNahuel

Coleman LowBoy Camping Fridge Lock Replacement

A neighbor left in the curb this camping fridge because the lock was broken... Looks like he doesn't have a 3d printer! I designed and printed this Coleman LowBow lock replacement to bring this almost new fridge back to life. Here you can…

Downloads
66
Likes
12
Rating
0

Mini Coleman Chiller Koozie - Dr Pepper and Diet Dr Pepper Theme

This is my version of the Mini Coleman Can Koozies, done in the Dr Pepper and Diet Dr Pepper Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in…

Downloads
66
Likes
12
Rating
0
P
Printablesgubutek

Coleman tent clip replacement

This is the replacement for my Coleman tent clip. I used cable tie to hook it into the tent strap. The instruction is here https://gubutek.wordpress.com/2022/06/25/fix-coleman-broken-tent-clip/ I hope you can fix your tent for the next…

Downloads
65
Likes
19
Rating
0
P
PrintablesRaphhorn
Downloads
64
Likes
8
Rating
0
P
PrintablesBrad W

Coleman Knob Large

Replacement knob for a coleman stove. This version is made to match the size of original coleman knob.

Downloads
64
Likes
1
Rating
0
P
PrintablesFunkybuild

Coleman Cooler Two-Way Handle

Here is a replacement handle for all of us who have lost or broken one for our Coleman coolers. It should fit any Coleman cooler that uses their two-way handle (flips and hinges on two pegs). No additional parts needed if you still have…

Downloads
63
Likes
7
Rating
0
P
PrintablesFreddy-six

Coleman Xtreme 100QT Cooler Lid Prop

I can't found the right one for my Coleman Xtreme 100QT cooler so I create my own. Just a simple part, to keep the lid open, when you don't use the cooler. Printed with Extrudr PLA NX2 hellfire red with a 0,4mm nozzle and 0,2mm layer…

Downloads
61
Likes
5
Rating
0
P
PrintablesRflewelling

Coleman/Fleetwood Redwood Camper Thermostat Box

I needed a replacement box for my popup camper renovation. This was measured after the dimensions of the original. which is about 149mm x 149mm. This can be a 1:1 replacement for the original box that is damaged. I left it solid and will…

Downloads
59
Likes
16
Rating
5
P
Printablesrebeltaz

Coleman Above Ground Pool Angled Return Diverter

The return hose on our Coleman 14' x 42" above ground pool shoots the stream straight out into the center of the pool. Any pool this large (or larger) really should have the return flow diverted to the side, away from the inlet so that…

Downloads
58
Likes
5
Rating
0
P
Printablesjeremy cobert

coleman lantern fount bumper

I got tired of scuffs on the bottom of the fount for my 1971 Coleman 228F lantern so I designed a simple solution. This should fit most older Coleman lanterns, if not just adjust the size of your print +- % and you should be good. Printed…

Downloads
55
Likes
5
Rating
0
P
PrintablesAki

Lantern(coleman 295)protective ring

A protective ring cover for Coleman Lanterns or Stoves. It is for 295. Tank outer diameter is 154mm. It has a structure that gets caught on the inner processed part and does not come off easily. It should fit a Coleman one of similar…

Downloads
55
Likes
9
Rating
0
P
Printablesccc888

Water Dispenser Adapter for Coleman Chiller 5 Gallon Water Jug

Bottom face down, print with support to get the best result.

Downloads
54
Likes
9
Rating
0
P
PrintablesAki

Lantern(coleman 282) protective ring

A protective ring cover for Coleman lanterns. It is for 282. Tank outer diameter is 134.8mm. It has a structure that gets caught on the inner processed part and does not come off easily. It should fit a Coleman one of similar size.

Downloads
52
Likes
9
Rating
5
P
PrintablesDan Rogers

Coleman 150 quart Cooler latch

Print as saved in .3mf file - prints well at .1mm layer height, supports on build plate only, 5 vertical shells This is a replacement latch handle (the outer part) for a Coleman 150 quart cooler. That's the 5 day model - it is huge. My…

Downloads
51
Likes
3
Rating
0

Lantern protective ring - coleman 226

A protective ring cover for Coleman lantern model 226. Tank outer diameter is 98.5mm. I printed with TPU 95 - 0.2mm , that gets caught on the inner processed part and does not come off easily. Infill: 20% Temp: 220 C Bed: 60 C Good Luck.…

Downloads
51
Likes
12
Rating
5
P
PrintablesJoe

Avenli/Bestway/SaluSpa/Coleman Inflatable Hot Tub — Type VI Filter Adapter

The Problem The Avenli Vermont inflatable hot tub ships with a filter cartridge (marked "Type 2") that doesn't quite fit standard sizing, it has a smaller bore and different ring placement. Replacements are harder to source, more…

Downloads
50
Likes
7
Rating
0
P
Printablesschreiber884

1/10 scale coleman voltmeter cooler

1/10 scale coleman voltmeter cooler. voltmeter slot is 25.5x15.5mm holes are 33.5mm apart. Slot in the back is big enough for a standard JST plug. link to waterproof voltmeter :…

Downloads
50
Likes
21
Rating
0
P
Printablesshaktimaan

Coleman Cooling Box Spare Part Handle Knob 52 QT | 52QT Extreme

Print with 0.2 or 0.15mm layer height. Orientation lying with Supports should increase strength as printing lines are perpetual to force vector. Use PETG or ABS for extra strength.

Downloads
49
Likes
2
Rating
0
P
PrintablesRflewelling

Coleman RoadTrip 285 Replacement foot

Original on the left, replacement on the right. One of the feet on my Coleman RoadTrip 285 broke. I wasn't able to source a replacement so I quickly designed and printed a replacement. Printed at 40% cubic infill with Elegoo ASA for…

Downloads
48
Likes
2
Rating
0
P
PrintablesNick

1 inch Intex or Coleman filter connector plug

I have plumbed my pool with PVC pipe going to and from an upgraded filter and no longer could use the 1 inch lines that came with the pool. Needed a plug for the hose hook up ports. Designed this to be able to slide in with a tight fit,…

Downloads
48
Likes
2
Rating
5
P
PrintablesDave Bernhardt

Anova Sous Vide Adapters for Coleman Stacker Cooler

I created an adapter set for my Anova Sous Vide Bluetooth/Wifi cooker to use with my Coleman Stacker cooler. This is a three piece kit that has a screw on mechanism for the inside of the cooler, and two variations of the top - an open one…

Downloads
47
Likes
6
Rating
0
P
PrintablesAdam Jonkers

Coleman shade tent foot

It was designed for the Coleman Event 14 Shelter but should also fit the Coleman Event 12, Party Shade and Oasis

Downloads
47
Likes
3
Rating
0
P
PrintablesKrishGup

Coleman Water Bottle/Thermos Handle Replacement

Replacement handle for this style of Coleman water bottle/thermos Designed to use either the original metal ‘rivets’ the bottle already uses or a 2.5/3mm screw with a small washer. Amazon.com : Coleman FreeFlow Vacuum-Insulated Stainless…

Downloads
46
Likes
5
Rating
5

Mini Coleman Chiller Koozie - Harley Davidson Theme

This is my version of the Mini Coleman Can Koozies, done in the Harley-Davidson Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…

Downloads
46
Likes
9
Rating
0
P
PrintablesAndrewY

Natural Gas/Propane Adaptor for Coleman Powermate Pulse Plus 1750

Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…

Downloads
46
Likes
3
Rating
0
P
PrintablesLee

Coleman Mach Rooftop AC

This air ramp thingy makes the air conditioner considerably quieter and improves airflow. Fits both 15k & 13K BTU units.

Downloads
44
Likes
12
Rating
0
P
PrintablesInnovations 3d

Propane Cylinder Stand for Coleman – Modern and Stable Design

This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…

Downloads
42
Likes
7
Rating
0
P
PrintablesAtomicmoped

Coleman lantern and stove leather pump mold

This is the 15th (and final) version after a LOT of tweaks. I got sick of paying way too much for the Coleman leather pump cups for my lanterns and stoves (if I was even able to find them). The neoprene ones are horrible and always fail…

Downloads
42
Likes
10
Rating
0
P
Printablesjgentry

Coleman 17FQ Camper Kitchen Cubby

I designed this for my 2017 Coleman 17FQ Travel Trailer. There is a nook in front of the kitchen sink that we wanted to use for toothbrushes and other toiletries but were worried about water damage to the wood. I designed this to fit in…

Downloads
42
Likes
14
Rating
0
P
Printablesmfetting

Coleman Directional louver fin

A directional louver for a Coleman-Mach RV air conditioner found on the Winnebago Rialta RV. This part directs the cold air inside the cabin. Twelve fins are required for the ceiling distribution assembly mounted inside the coach under…

Downloads
40
Likes
4
Rating
0
P
Printablescharlescho

Coleman Triton Propane Stove Adapter Holder

This thing will hold the propane adapter in place in storage mode.

Downloads
38
Likes
8
Rating
0
P
PrintablesProjectsupra

Cooler hinge icebox coleman cruzin cooler scooter

Super simple hinge I made to replace the broken one on my Cruzin Cooler scooter, same hinge as most Coleman and other coolers also. Print from TPU or other very flexible material.

Downloads
37
Likes
8
Rating
0
P
PrintablesNoel Swede

Coleman 533 cover

cover for the stove, use some 1/8 bungies to keep it on.

Downloads
33
Likes
3
Rating
0
P
Printablespennyfarmer

RV fridge lock Coleman 17b / 17R may work for other camp trailers

I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…

Downloads
33
Likes
6
Rating
0
P
PrintablesDan Rogers

Captive furnace door handle and seal - Coleman Furnace

Summary - Replacement for the captive door handle and seal on a Coleman high-efficiency furnace. Story - while opening the door on the top of my furnace, the original captive doorknob popped out and rolled into a hole in the floor. I used…

Downloads
33
Likes
0
Rating
0
P
PrintablesFingWizard

Coleman 100qt 5 Day cooler Lid Prop

A wedge I made to keep the cooler lid open while filling the cooler. It was made for a Coleman 100qt, 5-day cooler, but it's pretty universal and should fit many different styles, printed with 20% infill, no supports, standard settings. I…

Downloads
32
Likes
2
Rating
0
P
PrintablesUnhinged 3D

Coleman Camper door handle

My camper handle broke so I made this up and has held up over a year so far. I suggest printing in ASA but PETG will also work.

Downloads
31
Likes
6
Rating
0
P
Printablesjgentry

Coleman 17FQ Camper Kitchen Cubby

I designed this for my 2017 Coleman 17FQ Travel Trailer. There is a nook in front of the kitchen sink that we wanted to use for toothbrushes and other toiletries but were worried about water damage to the wood. I designed this to fit in…

Downloads
31
Likes
9
Rating
0
P
Printablesywabiko

Coleman Cooler Keep-It-Open

A small thing to keep your (cheap) cooler open:) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15 Filament: Hatchbox PLA Category: Outdoor & Garden

Downloads
31
Likes
8
Rating
0
P
Printablesjeremy cobert

coleman lantern fount bumper

This is a fount bumper to place on the bottom of a Coleman lantern, printed in TPU. This is a work in progress and there will be many more changes. Dont shrink this to fit a smaller fount, it wont line up properly Wait for a small fount…

Downloads
30
Likes
4
Rating
5
P
Printablesbykim

Anova Pro Sous Vide to Coleman Party Stacker Collar Adapter

Collar adapter for an Anova Pro Sous Vide stick on a Coleman Party Stacker 48 can. Sized to fit a 2.5" hole cut with a hole saw. Anova Pro is 2.37" dia. The collar makes up for the gap between the two and has a lip to hold the Anova in…

Downloads
29
Likes
5
Rating
0
P
PrintablesJK

Coleman Outdoor Gas Stove Knob/Dial

I created a 3D model of a replacement knob for a Coleman gas stove. The original knob, when turned, would slide instead of opening the valve, rendering the stove dysfunctional. The opening for attaching it to the spindle is slightly…

Downloads
29
Likes
3
Rating
0
P
PrintablesKyle88

Coleman Air Mattress Plug

Replacement Air Mattress Plug

Downloads
27
Likes
1
Rating
0
P
PrintablesBen Hague

Coleman Petrol Stove Pump seal

Remember to check if your filament is Petrol safe

Downloads
27
Likes
6
Rating
0
P
PrintablesAndy F

Coleman CT200U or CT200 Minibike Front Rack Mount

Adding the front suspension kit from Coleman to a CT200U removes the place to mount your front rack. These arms give tha

Downloads
27
Likes
3
Rating
0

Carry box for a liquid fuel Coleman camping stove

Storage box meant to carry camping stove in a camper trailer in a more organized fashion. This is using mixed materials: bottom, front and back - plywood sides - 3d print 3d printed pegs to secure sides to plywood.

Downloads
27
Likes
11
Rating
0
P
PrintablesHumeco

Adjustable Foot for Coleman Eventemp Stove

Replacement foot for Coleman Eventemp to allow leveling of the stove on an uneven or sloping surface

Downloads
26
Likes
2
Rating
5
P
Printablesherrb

feet coleman peak 550B (multi fuel stove)

Feet for the coleman peak 550B multi fuel stove. Made to fit them to the stove with an m3 bolt.

Downloads
26
Likes
3
Rating
0

Mini Coleman Chiller Koozie - Milwaukee Theme

This is my version of the Mini Coleman Can Koozies, done in the Milwaukee Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I included…

Downloads
25
Likes
5
Rating
0
P
PrintablesCarson0001

Coleman Lantern Box

A simple box for a white gas Coleman lantern. It's basically impossible to find a case that fits these lanterns as they use glass and are thus susceptible to breakage during transport. This model uses piano hinges on the top and a normal…

Downloads
25
Likes
5
Rating
0
P
PrintablesAki

COLEMAN 550 STOVE KNOB

Coleman 550 stove knob. Made from heat-resistant materials such as polycarbonate.

Downloads
24
Likes
3
Rating
5

Mini Coleman Chiller Koozie - Coka Cola Theme

This is my version of the Mini Coleman Can Koozies, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…

Downloads
23
Likes
6
Rating
0
P
Printablesbykim

Coleman Onesource Battery Cap

Embossed arrow on the side of the model to help align the battery. Print settings: 0.6mm nozzle 0.3m layer height Supports everywhere Organic support 3 perimeters 6/23/2023: Added additional model for multiple batteries. Import the bodies…

Downloads
23
Likes
2
Rating
0
P
PrintablesGeoff

Coleman (and similar) portable 2.4m gazebo repair clips

There are a bunch of different brands for very similar light weight aluminium fold-up 2.4m gazebos. They are prone to the thin sections snapping where they cross each other when subjected to high winds. The one we were specifically…

Downloads
22
Likes
2
Rating
0
P
Printables3dbplug

Coleman/Bestway spa panel cover

Panel too bright to see stars? This will help with that 5 bottom lays

Downloads
22
Likes
7
Rating
0
P
PrintablesDonny

Coleman 424 Stove - Valve Wheel Knob

we needed a new knob for my local boy scout troop camp stove, i forgot to take a picture of the finished product. i printed it out of ASA

Downloads
22
Likes
2
Rating
0
P
PrintablesSpittyman

Pin holder for tent poles - Coleman McKenzie Cabin 4 (IKEA Ivar Pins or screws)

I printed this pin holder for our Coleman McKenzie Cabin 4 in order to fix the tent poles to their genuine attachement (holes). You might have to change diameters according to your poles or screws you use. For this, I included step- as…

Downloads
22
Likes
5
Rating
0
P
PrintablesMessyExtrude

Coleman Shelter Tab Release Tool

Coleman Event Shelters can be tricky to take down because the sprung release tab is often too narrow and hard to push down especially especially if doing it by yourself. This tab release tools saves you time and your hands from the pain…

Downloads
20
Likes
6
Rating
0

Coleman 1/2 Gallon Compatible Handle

Coleman 1/2 Gallon Compatible Handle Designed for the Coleman 5690 / 5590

Downloads
19
Likes
2
Rating
0
P
PrintablesAndy F

Predator 224 Air Intake Cover - Coleman Minibike

Replace your air intake cover with your own printed model, adding color or intake options as you please! This fits the Predator 224 non-hemi. I don't know if this fits the 212 or other 224 hemi versions, but if you have one or know,…

Downloads
18
Likes
3
Rating
0
P
Printablesspamy666

Flextail to Coleman Supercomfort Self-Inflating Sleeping Mat

This is printed in TPU to match the soft seal the original bag uses; however, if it works in anything else, please feel free to share in the comments. The sleeping mat I have is the Coleman Supercomfort Self-Inflating Sleeping Mat 12cm…

Downloads
18
Likes
2
Rating
0
P
Printableslanguer

Coleman QuickPump Adapter

Additional adapter/nozzle for Coleman's QuickPump. Needed a finer (smaller diameter) nozzle (adapter) to fit into some smallish inflatable kiddie pool for a water day at school. Got one designed and printed in about two hours, and in one…

Downloads
18
Likes
0
Rating
0