79 models
We got the SUNTEC Mobiles Klimagerät Impuls 3.5 Eco R290 from Amazon but the connector was for american households... :-( We made an “general” adapter to use it in a german window (open) with the blind shades shut. We just open the window…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…
I needed to vent the hot air from our AEG airconditioning/AC unit and the only option was the letterbox in the main door. So I designed this adapter that goes from 150mm flexible pipe to a rectangular/letterbox shape. Modelled in OnShape…
Adaptateur de climatisation tuyau souple 150mm à visser vers 100mm PVC. Conçu en deux parties à recoller. Imprimé en ASA pour usage extérieur et sous flux d'air chaud. Air conditioning adapter flexible hose 150mm to screw to 100mm PVC.…
I needed a low profile straight adapter to connect my portable air conditioner to an adapter which is on my wall. It converts from 150mm hose to 100mm wall mounting, and is designed to just slot over the adapter to outside. Ignore the…
I needed a 2nd exhaust adapter for a 2nd hose. This is a copy of the original, drawn by me. It is suitable for a 150mm diameter hose. I've attached the Fusion 360 file in case anyone wants to adjust the size to suit their unit. The…
This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…
Warning!! Fan manufacturers make tiny differences in their fans, so please measure your fan and update the model accordingly. I have provided the .Blend files if you wish to modify them from the source. My modeling method is centered…
I needed a 90 degrees duct to connect my air conditioning duct (150mm) to my ventilation system (125mm), without the use of excessive amounts of duct tape It fits on a mks3s+ build plate, well it kind of fits. :D I suggest you split it up…
Voici un remix renforcé de Allan Fonroques Imprimé en ABS
Printed in PETG on a Prusa Mini+ with 0.2mm layer height, no supports (I had them enabled everywhere but none were needed), and 20% infill. I attached it to my air conditioner with hot glue. If you wanted to direct air to the left you…
I printed this adapter to connect a 200mm CO2 laser exhaust pipe to a 150mm pipe.
This is the exhaust fan for the Royal sovereign ARP-9009TL model, if you have any questions leave a comment.
F-14 Tomcat Air Conditioning Control Panel
I needed a low profile elbow to connect our portable air conditioner hose to a wall outlet. It needed to turn 90 degrees and also reduce the 150mm hose to a 100mm connection on the wall Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Wall Mount Holder for Midea AC Remote Control A practical and sleek holder designed to keep your Midea air conditioner remote control safely stored and always within reach. Easy Mounting: Designed to be screwed directly onto a wall or…
If you have a window vent like mine this box will let you attach the flex hose exhaust of your mobile air-conditioning unit to it. As the part is symmetrical you can print two, one as-is and one mirrored, and attach them together to form…
Support pour télécommande Fujtsu ( Installation Murale
Hallo, das ist meine Bauraum Heizung für meine 3D Drucker. Ich habe hierzu die Elektronik Heizlüfter benutzt, der alle Sicherheitskriterien besitzt, die man für den Betrieb im Innenraum benötigt. Clatronic Heizlüfter HL 3379:…
Fits a 155 mm hole with a 150 mm hose. I would print it with PETG for best stability and heat resistance. The 150 mm hose can get fastened with a steel hose clamp. Made with FreeCAD. Used with a De'Longhi Pinguino PAC EM82. Update August…
Vents to redirect your AC. I have tubes that feed the AC in our ceiling that just put the air straight down. This helped get the air to the entire room. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Prusa PETG, no support
My air conditioner was blowing not enough air into my room, and what air it was blowing was blowing at either a cupboard or straight out the door. The air conditioner vent is an Advantage Air with the vent itself having outer dimensions…
– 24/07/2023 - Reduced board size for greater compatibility -v1- Adapter for Ø150 mm to Ø100 mm portable air conditioning hose. Serves to connect the air conditioner adapter to a smaller hose without obstructing the flow. it must be…
Fits a little tight. might be able to print at 99% for an easier fit. I just hit it on with a hammer and it fit fine.
Please see here for the complete file package: https://www.printables.com/model/632833-range-hood-window-exhaust --- This is an adaptor to mate a 6 inch air duct to the window exhaust vent here: https://www.amazon.com/dp/B0BV68L8DY. I…
Bouche d'extraction de ventilation / climatisation diamètre 100mm. Imprimé en ASA pour usage extérieur et flux d'air chaud. Ventilation / air conditioning extractor, diameter 100mm. Printed in ASA for outdoor use and hot air flow. Print…
An extension for the air conditioning hose that can be placed in a partially open window or balcony door. Nástavec na hadici klimatizace, který lze umístit do pootevřeného okna, nebo balkonových dveří.
It was for a SunTec Portable Airconditioner. Inner diameter is 138mm but i can pressfit a 150mm tube inside it.
Vymodelováno podle originálního dílce - v programu fusion 360
Hi! Since Ford do not sell the lever alone, but the hole electric diverter (+200€), I printed it. I found the model online but it was for 6€ so i drew it by myself My lever fits perfectly, so here's HOW I printed it: Material: ABS Without…
Notes: The vent body does not rotate inside the AC vent opening as it uses the size of the print to push itself into the AC Vent hole. Print Setting Instructions/Tips: Use PETG or ABS or ASA or stronger material with better heat…
Needed to block the hole in the wall for the portable air conditioning. Measured 110mm hole.
Car air cond vent broke, need connector, designed it, printed it with PETG, you're good to go. STEP files included if you want to mod it. No commercial selling of this pls. only for personal use.
Air conditioner vent insert. These inserts fit the aircon vents that hold four 175mm X 175mm inserts. I've provided two styles - one thicker and stronger, the other thinner which uses less material. Both are suitable for normal use. I've…
During installation of our air conditioning, one of the screw covers disappeared (of course…). The visible screw was really bugging me, so I decided to remodel it and try to 3D print it. The part came out quite nice! Of course, there is…
remote control holder from air-conditioning 25mm thickness and 27mm thickness Category: Organization
Just a quick bench tidy I whipped up for the Lee Case Conditioning Kit which includes the cutter and lock stud, chamfer tool and primer pocket cleaner. Didn't spend much time designing it just after something quick and simple. Any…
Air conditioning deflector. Designed to deflect the air flow. After changes in my children's room, I realized that the air conditioner would blow the air flow directly over them. Searching deflectors, I decided to risk creating my own for…
Pajero rear air conditioning button
Pretty niche need, but if you have a high-velocity AC outlet and need to diffuse the high-velocity jet of air, this part fits into the outlet cover and redirects the flow to the side. I designed this because I have an AC outlet directly…
Since I tape my portable AC window adapter into my window to prevent infiltration of warm, humid air into the house, when I put the AC unit away for the winter, I have a massive draft. This damper will allow you to change the amount of…
If you have several air conditioning pipes with a diameter of 150mm, you can connect them with this connector. I recommend printing from PETG, because of the temperature resistance. Choose supports more classic than tree. Perimeters 3 and…
Coupler of two air conditioning hoses 150mm I needed to connect two mobile air conditioning hoses to one outlet. That's why I made this coupler model. Unfortunately, I had to cut it vertically into two halves to be able to print on a…
A 3D-printed air conditioning water outlet is a custom-designed component that allows for efficient drainage of condensate from air conditioning units. These outlets can be tailored to fit specific installation requirements, ensuring…
Bracket for JISULIFE Portable Handheld Fan (5000mAh) I made this bracket to attach to your pants or belt, letting your JISULIFE Portable Handheld Fan (5000mAh) clip on securely with a satisfying snap. It pulls air in and under your shirt…
Botão de reposição Ar condicionado elgin 8300
This is a Air Conditioning remote control holder for the model Electra ETRDO34TC
AC adapter that allows the hot air from your electriQ (and others) to be expelled via the mailbox letterbox. I printed with tree organic supports in PTEG 35% infill.
a simple Tire shaped air conditioning aromatherapy
tapon para que no se vean los esparragos de los silenblocks de m8
Adapter from air conditioning system to chimney Designed for Chimney diameter 160mm Hose diameter 150mm CAD Model:…
Air conditioning hose reduction. On one side 150mm on the other side 120mm flange. This is an asymmetrical flange for spaces where there is not enough space from the side. Also, the wall height of each part is reduced to 40mm (80mm…
Description This mount allows the hot air exhaust of an air-con to be vented outside through an wall. This particular design is for an Hantech Local Air Conditioning unit. This design also includes a grating to prevent any animals from…
Adapter to attach to the end of the included hose, and provide a surface suitable for attaching 150mm flexible duct.
The reducer is made symmetrically with a small flange at the ends to prevent the hose from sliding out. It is possible to secure it with adhesive tape. I recommend printing from PETG because of its temperature resistance. I chose more…
To build a Peltier cell cap air conditioning unit, you will need 2 Peltier cell kits, which you can purchase on AliExpress from the link. https://a.aliexpress.com/_EwUiUd4 Assembly: 1. Screw the 2 fans to the 2 heat sinks. 2. Spread…
I have problem with the Air Conditioning Hose which didnt hold in appropriate gap. So I printed this holder which is placed on stand. Now the hose has suppored well.
reducer for air conditioning, this fixture is designed for under-seat air conditioning in passenger cars and distribution via a hose to the rear of the car. The product must be printed from PET-G or other material that can withstand the…
Mounting plate for SMXir Air Conditioning control panel. Based on original mounting plate. I used PETG with 60% infill.
I created an air conditioning exhaust including a plug against unwanted influences (insects, birds, etc.) I used full perimeters and 0.25 layers. Very easy to print. I put insulating tape between the plug and the exhaust body (with 1mm…
My Air Conditioning remote. (Scaled down a bit)
This is a fully functional siphon for AC (Air Conditioning). It traps bad smell in 2 ways: 1.Blocking with water 2.Blocking with bung when the water has evaporated (if you haven't used AC for long time). It’s designed to 40mm sewerage…
Wall holder for air conditioning Inventor Supreme SUVI-18WFIB.
The amount of dust getting pushed around in my RV trailer was getting obnoxious, so I decided to make a filter setup for it. You can really only do this on the XL in my opinion, bad enough I had to break it into 4 sections as it was. I…
As this summer was quite hot, I decided to by a mobile air-conditioning system (TROTEC PAC 3810). It can cool my house powered by photovoltaic system. Typically, there is plenty of energy available in that situation. To avoid drilling a…
I printed it with PETG and glued it together.
this part is required to reduce the air flow to pass through a small gap in the window Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2 Infill: 25% Filament: Polymaker Polyflex PLA Black…
3/4 inch PVC watering fixture for AC drain for irrigation. More info: https://www.techadjacent.io/p/free-water-for-irrigation-via-air
My slicer was detecting some overhang so i've quickly modified the model.
I have printed the model with PETG and 100% infill.
I have printed the model with PETG and 100% infill.
The model was printed with PETG and used 100% infill.
I have printed the design with PETG and used 100% infill. I have glued the two parts together with superglue.
Description This mount allows the hot air exhaust of an air-con to be vented outside through an wall. This particular design is for an Hantech Local Air Conditioning unit. This design also includes a grating to prevent any animals from…
Support pour télécommande Fujtsu ( Installation Murale
