Search results: contain

Sort order

7,366 models

P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Downloads
7,383
Likes
1,353
Rating
4.83
P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Downloads
3,950
Likes
559
Rating
4.83
P

Egg Maze Container cactus pattern

Egg-shaped puzzle container with “cactus like” ribbed pattern on the outside. This maze is not complex, without too many long dead-ends; but there are no external indicators of where the “pointers” in the maze are located. Designed to…

Downloads
2,576
Likes
279
Rating
5
P
Printablesh3li0

ruck · container

ruck · container minimal screw-lid container, designed for function and form dimensions in mm: container ~ x: 85 · y: 85 · z: 105 lid ~ x: 85 · y: 85 · z: 13 important · make sure that: your filament is dry and calibrated so that it deals…

Downloads
2,263
Likes
734
Rating
4.83
P
Printablesvandragon_de

Trucks for my Container Ships

So that the fun of the game continues even outside the bathtub, I provide two trucks to transport the containers. So let's get to the fun of the game.

Downloads
2,094
Likes
351
Rating
4.86
P
PrintablesRalf D. Müller

Foldable 20ft Cargo Shipping Container Model

A Cargo Shipping Container as easy to print foldable model. Key Features: Highly Detailed : Accurate representation of a 20ft shipping container, capturing all essential features and dimensions. Easy to print : prints on all standard…

Downloads
735
Likes
112
Rating
5
P
Printablesgillis

Wallet / Credit card container

Print-in-place box with snap lock. Two versions, one covered and one with hexagon pattern. Each with or without push-hole in the back. (A “credit card” in correct size is also attached) PLA Check video how to break loose the hinge…

Downloads
536
Likes
76
Rating
4
P
PrintablesMinimayhem

Stackable Container

A deeper version of my Stackable Tray, 100mm x100mm x 80mm deep Print with supports, 0.2 layer, 15% infill Any comments /changes welcome For a shallower version see here, https://www.printables.com/model/702755-stackable-tray

Downloads
241
Likes
43
Rating
5
P
PrintablesBooks

McMaster-Carr 5 Gallon Isopropyl Alcohol Container Spout

A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.

Downloads
161
Likes
17
Rating
5
P
Printablesmbrs

module container

module container these are three variants of a container that can be freely increased it is possible to scale the object to size you want

Downloads
53
Likes
13
Rating
0
P
PrintablesNorberg

Watertight container with reused screw cap

Upcycle the screwcap TwistCap OSO 34 from a Tetra Rex package often used for milk and other liquids. Creates a waterthight seal to keep the content safe from water. Freecad model included to allow customization. No support needed.

Downloads
53
Likes
16
Rating
5

Funnel for filling of regenerated Silicagel into 800g container

EN: The funnel is designed to facilitate the filling of regenerated silicagel into the original 800-gram container with an opening of approx. 40mm diameter. It can be printed without the use of supports. CZ: Trychtýř je navržen pro…

Downloads
50
Likes
2
Rating
0
P
PrintablesCalipee

Print-in-Place Container for Victorinox Tomato Knife V2

This is an updated version of my Print-in-Place Container for Victorinox Tomato Knife . The old version had some issues when inserting the knife and the magnets didn't fit well. The new version still need two magnets (≤ 8mm diameter) but…

Downloads
49
Likes
12
Rating
0
P
PrintablesBooks

McMaster-Carr 5 Gallon Isopropyl Alcohol Container Cap

A threaded screw-on cap for the 5-gallon isopropanol drum from McMaster-Carr. A rough FreeCAD model of the neck in available as well.

Downloads
45
Likes
3
Rating
0
P
PrintablesBraw

Intertwined Heart Container

Lovely container for your stuff. Included a MK4 and XL multi-color 3mf.

Downloads
37
Likes
5
Rating
0
P
PrintablesPPrints

Wyrmspan game token container

Token, egg and card container for Wyrmspan game, fits into original box alongside other game boards and cards

Downloads
36
Likes
4
Rating
0
P
Printablesmkoistinen

Bit-holder for small Craftsman VERSASTACK Nano Containers

This is an over-engineered solution for a minor problem, but…. I got fed-up with my mish-mash collection of ¼" ratchet sockets and decided to buy a clean set of metric ones and another clean set of SAE ones. When I got home, I noticed…

Downloads
30
Likes
9
Rating
0

Philips HR1372 new lid for big container (HR393501)

As Philips is designing original lids in a way, they get broken very fast and they are not repairable I was forced to either buy new one for 750 czk (half of the price of whole mixer at that time) or design my own … I decided to go with…

Downloads
28
Likes
3
Rating
0
P
PrintablesRuubs

Pokeball Container / Planter

A simple container or planter based on the pokeball from pokemon. Assembly Align the bottom part with the center ring of your choice and glue them together. Align the top part with the center ring and glue them together too. Take the…

Downloads
15
Likes
4
Rating
0
P
Printablesgdrag

Silica gel spool container

I redesigned from scratch my favourite silica container by Malolo. I loved absolutely everything about it, except that it prints a little slow. I used horizontal slots so that it prints much faster with less retractions and hops. In 0,3mm…

Downloads
43,330
Likes
11,173
Rating
4.94
P
PrintablesSytan

Mini Hanging Storage Container

This was an unintentional remix. I actually started a design for a pill container on my own, and then found this one, which was very similar! I reverse engineered their lid design, as my first one was trash, and then I improved upon it as…

Downloads
22,623
Likes
5,048
Rating
4.92
P
Printables3D_Workspace

Silica-Gel-box (spool-container, optimized for super fast print)

These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…

Downloads
20,674
Likes
4,995
Rating
4.86
P
PrintablesNasBoc

Shipping Container

Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…

Downloads
17,816
Likes
2,502
Rating
4.96
P
PrintablesLV3D

Knurled Containers

🌀 Knurled Containers Stylish and practical screw-top containers with a diamond knurled surface for a firm grip and clean look. Perfect for storing small parts, screws, accessories, or any desktop items. Custom heights available on request…

Downloads
13,414
Likes
3,059
Rating
4.97
P
PrintablesLV3D

Knurled Container

Compact container with screw-on lid and textured grip. This is a 3D printable screw-top container featuring a knurled (cross-hatched) surface for better grip. The simple cylindrical design makes it ideal for everyday use and easy to open…

Downloads
11,550
Likes
1,856
Rating
4.93
P
PrintablesMalolo

Malolo's Silica Gel / Desiccant Containers

I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…

Downloads
11,374
Likes
2,046
Rating
4.94
P
PrintablesRegal_Prop-Shop

Regal & Markiplier - Iron Lung Blood Bucket Popcorn Container

Regal has partnered with Markiplier's Iron Lung movie, to provide fans the ability to print their own collectible popcorn container. Working with Iron Lung's creature creator, Molly Brown (@deadlymelodic), Regal's Prop Shop team created…

Downloads
11,050
Likes
471
Rating
4.55
P
Printablesgimpelginster

Modular Skadis Container System (S)

These are some small skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. If you need some more space, you could print the Modular Skadis…

Downloads
10,325
Likes
3,811
Rating
4.93
P
PrintablesMeister Edel

EDC Container Box Capsule + O Ring

--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…

Downloads
9,369
Likes
3,450
Rating
4.94
P
PrintablesPointNemo

Outdoor Container / Pill Box

Sizes (Diameter x Height): 30 x 25 mm 30 x 35 mm 30 x 50 mm 42 x 35 mm (2 mm and 3 mm thread) 42 x 50 mm (2 mm and 3 mm thread) 42 x 65 mm (2 mm and 3 mm thread) 66 x 50 mm 66 x 65 mm 66 x 80 mm Printing Parameters: Resolution: 0.2 mm…

Downloads
9,269
Likes
1,520
Rating
4.97
P
PrintablesGunplaMark

The Ultimate Cereal Container Filament Drybox

NOTE: While still in use by a lot of people, this version of the drybox system has been deprecated in favor of the updated one here: My previous filament drybox model became more popular than I ever imagined, and after taking on a lot of…

Downloads
8,538
Likes
2,116
Rating
4.82
P
PrintablesRohweron

Small Containers with Screw Lid

Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…

Downloads
7,313
Likes
1,698
Rating
4.82
P
PrintablesGeddy

Sea Container v3.0 (Stackable, 1:43 scale)

Logo free version is available here: Commercial version is available here: The new 1:64 scale container is now available here: About Sea Container v3.0 This is improved design of the stackable Sea Container at scale 1/43. It is compatible…

Downloads
7,186
Likes
3,526
Rating
4.98
P
Printablesh3li0

pulse · container

pulse · container modern minimalist container design with twist lock lid, with two different lid options - closed and with an inner hole (can be used for heets as an example) dimensions in mm: container ~ x: 74 · y: 74 · z: 81 lid ~ x: 74…

Downloads
6,173
Likes
1,537
Rating
4.93
P
PrintablesJudhini Prints

Parametric Minimalist Storage Container with Thread

Discover the Parametric Minimalist Jar with Thread —the ultimate blend of style and functionality for your 3D printing needs! This sleek storage container not only looks fantastic but also serves a practical purpose in keeping your space…

Downloads
6,035
Likes
1,529
Rating
4.9
P
Printablesvandragon_de

COS - the Container Ship

A container or cargo ship belongs to every bath tub fleet. I once drew a small and a particularly large version. The swimming characteristics are still very good even when fully loaded. Have fun printing :) Video: Print instructions Video…

Downloads
6,030
Likes
886
Rating
4.94
P
PrintablesGunplaMark

The Ultimate Cereal Container Filament Drybox - Official Remix

My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…

Downloads
6,020
Likes
1,246
Rating
4.82
P
PrintablesThe Next Layer

Threaded Container (quick screw)

This model was missing from Printable so I upload with credit to the original creator under Creative Commons.

Downloads
5,911
Likes
939
Rating
4.92
P
Printablessquinn

Container Pod (Parameterized)

A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…

Downloads
5,426
Likes
1,750
Rating
5
P
PrintablesMiguel M.

Twist Lock Container, Multiple sizes, Stackable.

This is a set of containers with a twist lock lid. The containers are roughly 4 inches in diameter and come in 5 sizes : 2, 3, 4, 5 and 6 inches. There are four dots on perimeter of the lids that align with the locking features on the…

Downloads
5,424
Likes
1,933
Rating
4.89
P
PrintablesArrowSwift

Improved Bullet Container

I got some Sunlu Gold PLA for Christmas and I knew what I had to print with it. It won't kill any werewolves (yes I know those are silver bullets don't get mad at me you can print it in silver), but man does it look sick. I changed the…

Downloads
5,180
Likes
984
Rating
4.91
P
PrintablesKim-Janosch

IKEA SKADIS Containers – 18 Sizes

Pick the size that fits: storage containers in 18 sizes for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 18 sizes For cable ties, pens, small…

Downloads
5,149
Likes
831
Rating
4.93
P
Printablesorangethanos

Hello Kitty Pencil/Paint Brush Holder/Container

I transformed Hello Kitty into a paint brush holder for my roommate. Supports needed. Pictures show 100% scale with general paintbrushes. I printed her sitting up. Please message if you have any issues :) This model was inspired by the…

Downloads
4,963
Likes
393
Rating
4.82
P
PrintablesTinkrMakr

Knurled Container Modular Threaded Stackable

Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…

Downloads
4,755
Likes
880
Rating
4.94
P
PrintablesTitanori

Modular Honeycomb Storage Container / Label space

Modular Honeycomb Storage Container with space for label This Container is a customizable storage solution designed for makers, hobbyists, and organizers. The modular container features: Screw-On Lid : Secure threaded lid for easy access…

Downloads
4,622
Likes
1,794
Rating
4.97
P

Print In Place Mario Coin Block Container

Here's a nostalgic container for the gamer in us all! I designed this model to print in place, and it needs no supports. Updated 8/31/23: I added a catch on the tail of the question mark to keep the block closed. Check out my Game Holder…

Downloads
4,599
Likes
1,093
Rating
4.9
P
PrintablesTomek

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

Downloads
4,588
Likes
810
Rating
4.88
P
PrintablesDrJones

mini bottle cap container (pill box)

This is just a simple and very small bottle cap container, i.e. you use ordinary bottle caps as lid. It adds only 5mm height to most bottle caps. At least for all the caps I tried, the cap closed nicely and tightly. EDIT: There are 2…

Downloads
4,135
Likes
1,174
Rating
4.97
P
PrintablesNiro
Downloads
4,060
Likes
1,034
Rating
4.18
P
Printabless0ren

Design your own container

Use OpenSCAD 2026 or newer to customize the design to your needs: https://openscad.org/downloads.html#snapshots Instructions Open the file "design your own container.scad" in OpenSCAD The panel on the right contains numerous parameters…

Downloads
4,011
Likes
1,007
Rating
4.96
P
Printablesvandragon_de

EMMA - a Container Ship

Emma is based on a Container Ship but adapted to my bathtub ships. The game play value this time is very high, just like the printing time. Many containers may be loaded and unloaded for play. This not only pleases the bathtub captain but…

Downloads
3,778
Likes
614
Rating
4.95
P
PrintablesSabre Design

Small travel container

Small storage container for cremes, cosmetics, hair product etc. Great solution for traveling. Container has a 10ml volume. Thread is tuned for the corners of the lid to line up perfectly with the container when using PLA filament, fit…

Downloads
3,770
Likes
986
Rating
4.89
P
PrintablesJake

Gridfinity post-it sticky notes stack container

UPDATE : I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the…

Downloads
3,711
Likes
478
Rating
4.98
P
PrintablesDrJones

container sets with bayonet lock

These containers come in sets of 6 which fit into each other, so they can be stored efficiently. The sets differ in their heights. use a bayonet lock (twist/click lock in 3D-printing slang) with a nice click due to some springy elements,…

Downloads
3,688
Likes
1,076
Rating
4.95
P
PrintablesSabre Design

Planter with drip container

This free planter is part of the Juno Planter Collection, you can see the whole Juno collection below. The complete set is available on my patreon shop, printables store and exclusive patreon or printables memberships:…

Downloads
3,426
Likes
1,289
Rating
4.93
P
Printableslaurens

cigarette container with lighter

there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…

Downloads
3,356
Likes
710
Rating
4.79
P
PrintablesExtrutim

Silica Box | Silica Gel Container | Fits Standard Spool

This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool. The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven. Holds over 100g…

Downloads
3,326
Likes
451
Rating
4.95
P
PrintablesLMaker

Multipurpose waste container

This is a waste container I design to use for multiple propouses like bambulab X1/P1 waste, pencil holder, store boxes… and other propouse you can give it. In the following steps, I'll explain what you need to do to assemble the…

Downloads
3,311
Likes
1,414
Rating
5
P
PrintablesMOrmesher

Ikea 365 Food Container Lid Hanger - Parametric

This is a parametric hanger for Ikea 365 food storage container lids - you can tweak how wide you want it, how many hooks, what size screw holes, and how many screws It was inspired by neuromorph's model linked below but remade from…

Downloads
3,310
Likes
1,670
Rating
5
P
PrintablesTater Zoid

Rugged Container 30mm Edition - 6 Sizes

30mm Rugged Containers This set of Rugged Containers features a 30mm interior width with various internal heights. The heights range from 20 to 70mm. This allows a great size range for a variety of personal uses. These, along with my…

Downloads
3,292
Likes
1,339
Rating
5
P
PrintablesJamehz

Everdell Complete Collection Resource Containers

This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I…

Downloads
3,181
Likes
407
Rating
5
P
Printablescmyk

Desiccant Spool Container with a twist

I needed a better desiccant container solution for my cereal box spool containers. Most models take too long to print and do not have enough holes. My design is 45% nothing. Meaning holes. Meaning air can flow freely. It uses 14g of…

Downloads
3,170
Likes
1,149
Rating
4.5
P

Fabergé Egg Maze Container (with or without mmu)

Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…

Downloads
3,153
Likes
986
Rating
4.98
P
PrintablesComrade_Zach

Doob tube, joint container.

Easy to print. No supports.Threaded cap. Not a flimsy tube.

Downloads
3,094
Likes
286
Rating
4.9
P
PrintablesScubaSteve

Stackable Pill Travel Container (now with v2)

I wanted an adjustable pill caddy for traveling. I wanted something that could adjust based on the number of days I would be traveling. This model has 3 parts. Top (Lid), Middle (Mid), Bottom (Base). The middle part is threaded on top and…

Downloads
3,081
Likes
940
Rating
4.78
P
PrintablesSabre Design

Acorn decoration container (tealight compatible)

Acorn autumn decoration. Available in large and small size, large is 150 mm tall and small 104 mm. The inside of the bottom is hollow to save on filament and to allow an electronic tea light to shine through when using translucent…

Downloads
3,049
Likes
964
Rating
4.93
P
PrintablesBlazko

Poop Chute with removable Container | Bambu Lab P2S/P1S/P1P/X1C

Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…

Downloads
2,948
Likes
133
Rating
4.83
P
PrintablesWindrose

Woven Heart Container | Tall

This is a tall version of @JamesThePrinter's lovely Woven Heart Container model. The original version is about 60mm tall, while this is about 85mm. This basket is perfect for storing anything that might be slightly larger in size. Prints…

Downloads
2,877
Likes
771
Rating
5
P
PrintablesDasMia

Pineapple Container

Keep your sweets in a fitting container! Or your other stuff - you can't go wrong with a pineapple container. It's a simple print, no supports needed. Just print a pineapple (smooth or with spikes) and a lid - that's it! It's also no…

Downloads
2,843
Likes
338
Rating
4.83
P
PrintablesDrJones

customizable silica gel container (vase mode) with funnel

This is a container for silica gel: It has quite a lot of holes and in total a quite high hole area ratio, so great air flow . It is printed in vase mode, which makes it quite fast to print (especially without retractions) and it uses not…

Downloads
2,801
Likes
785
Rating
4.98
P
PrintablesFruitieX

Gridfinity mini nipper holder (self contained)

2x2 version of Zack's nipper holder with the angle of the holders tweaked so they fit inside a 2x2 square. If you have long tools they will still stick out of the 2x2 area but not nearly as much as in the original (which works better in…

Downloads
2,776
Likes
595
Rating
4.94
P
PrintablesTitanori

TESSAINER 120 Asanoha Screw Top Container

A spacious screw top container featuring a detailed geometric pattern inspired by traditional Asanoha designs. The repeating star shaped structure covers both the container body and lid, creating a distinctive decorative surface while…

Downloads
2,773
Likes
651
Rating
5
P
Printablesh3li0

crest · container

crest · container modern minimalist container design with twist lock lid, in two sizes 75mm diameter ~ x: 75 · y: 75 · z: 78 105mm diameter ~ x: 105 · y: 105 · z: 110 photos show printed in wood and matte pla .40mm nozzle .16 layer height…

Downloads
2,771
Likes
905
Rating
5
P

EDC-Container

just another small container for a keychain, backpack etc. Put in your hearing protection, matches, pills, drops, banknotes or whatever. The lid is 1mm larger in diameter for reasons of stability There are two different versions of lids.…

Downloads
2,754
Likes
601
Rating
4.79
P
PrintablesDrJones

inside-cap screw container, various sizes (incl. pencil case)

A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…

Downloads
2,750
Likes
519
Rating
4.97
P
PrintablesPaul

Skadis Hex Container / Pen Holder

A simple container with hexagonal cutouts for the Ikea Skadis system . I personally use it as a pen holder. The only side that has no hex cutouts is the back so it's more stable and in my opinion it looks better too. I used so many…

Downloads
2,678
Likes
346
Rating
4.95
P
PrintablesBlue Wings

Ikea Skadis Pegboard Container Box

I remixed this design to include hooks that allows the box to be mounted to the pegboard without having to glue hooks. This means that supports are needed during printing. I have used Tree support rather than normal support as it is…

Downloads
2,673
Likes
423
Rating
4.89
P
Printablesh3li0

sylo · container

sylo container with screw lid diameter: 100mm height: 100mm and 50mm options + lid includes profiles for x1c and a1 mini 10% cubic infill variable layer height notes includes bambu studio 3mf files and STLs all photos uploaded are of the…

Downloads
2,667
Likes
873
Rating
4.67
P
PrintablesMichael

Parametric OpenSCAD Round Container Jar with a screw lid

Updated 16 Nov 2024 - inlude chamfer option Updated 27 Nov 2024 - Smooth Sides option I was looking for a parametric round container with a screw lid. Couldn't find anything on Printables but found an excellent design over at Thingiverse.…

Downloads
2,653
Likes
152
Rating
5
P
Printablesbriancmoses

Gridfinity AA Battery Containers

I have a bunch of Panasonic Eneloop AA batteries and I've learned that they're slightly wider than a standard AA battery. As a result, I figured I'd go ahead and design my own #gridfinity container. I was able to modify Jamie's OpenSCAD…

Downloads
2,633
Likes
219
Rating
4.34
P
Printablesder_da

Parametric OpenSCAD Round Container Jar With Screw Lid

I was looking for a parametric round container with a screw lid. Found the model by https://www.printables.com/@michaelh on Printables and adjusted it to my needs (see the differences section). The file is using the great…

Downloads
2,590
Likes
186
Rating
4.86
P
Printablessts210

100x70x100 Container with HSW Adapter

Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…

Downloads
2,585
Likes
524
Rating
4.96
P
PrintablesMartin_au

Screw and small parts storage container and drawers

A box with drawers for lots of screws and things. Print the main case rear downwards and you won't need supports. Wall thickness optimised for a 0.6mm nozzle. Update: 10/12/23. A few people have had issues with tight clearance of the…

Downloads
2,579
Likes
361
Rating
4.31
P
Printablesdtxtr

AA / AAA Battery Storage Container

A simple storage crate for AA and AAA batteries.

Downloads
2,555
Likes
434
Rating
5
P
Printableshexvolt

PolyDryer Extra Desiccant Container

Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…

Downloads
2,522
Likes
446
Rating
4.96
P
PrintablesFirstlayer Oy

Stackable Storage Bins/Containers with Lids (2 versions of bins and lids)

Stackable Storage Bins with Modern Honeycomb Pattern Introducing our versatile 3D-printable stackable storage bins, designed with a sleek modern look and a distinctive honeycomb pattern. These bins are perfect for organizing a wide range…

Downloads
2,515
Likes
579
Rating
4.64
P
PrintablesDusBus

Screwable pill container

I wanted something simple, rugged and compact to EDC one pill of Ibuprofen, without its packaging being damaged by other tools I'm carrying in the same pocket. It was my first attempt at designing something with a thread in FreeCAD and it…

Downloads
2,512
Likes
480
Rating
4.93

Grenade Stash Keychain Container

Discover the ultimate blend of style and functionality with our 3D Printed Grenade Stash Keychain Container! This unique keychain accessory is designed to securely store small items while adding a touch of adventure to your everyday…

Downloads
2,435
Likes
963
Rating
4.75
P
Printablesbiketiger

DESICCANT CONTAINER

Designed to fit inside center hole of filament spool in storage. Prints with no support necessary.

Downloads
2,400
Likes
275
Rating
4.89
P
PrintablesTorte

Bed storage container

Bedside table too small? Tired of tossing your accessoires to the ground when trying to grab them in the dark? Hook this container to the side of your bed to have your glasses, hankies, etc. always at hand. Printing: Bed-storage-hook: Two…

Downloads
2,340
Likes
1,194
Rating
4.92
P
PrintablesSMACKMAX_

Loot Crate Storage Container (with optional Watch & Ring Display Inserts)

03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…

Downloads
2,327
Likes
1,500
Rating
4.8
P
PrintablesJerryie

Containers with Screwtop Lid set

Round containers with a practical screw-on lid, available in 60x40, 70x40, 80x40, 90x40, and 100x40 sizes. Perfect for storing 3D spare parts, or small tools , keeping them neatly organized and securely sealed. Choose from a variety of…

Downloads
2,304
Likes
725
Rating
4.95
P
PrintablesPan_Barszczyk

Threaded container

I've modeled this container in blender. It actually threads surprisingly well. (water tight) Print Settings Supports: No Resolution: 0.2mm Infill: 20% Filament: Spectrum PLA Blue lagoon Notes: Printed with 50% original scale.…

Downloads
2,294
Likes
203
Rating
4.73
P
PrintablesDani C

Pill style container

A small container with external dimensions of only 80mm high (3.15") and a diameter of 25mm (1") (varies by model) this container offers an internal space of 76x20mm (3"x0.78"). The models can be combined with each other, they can also be…

Downloads
2,237
Likes
859
Rating
4.64
P
PrintablesHami

Filament waste container, poop basket / Filament Abfallbehälter

There are two versions with different hole sizes. The smaller hole size is easier for printing. No supports are required for either version. Suitable for my Anycubic Kobra 3 filament waste diverter…

Downloads
2,231
Likes
160
Rating
5
P
Printablescampy

Silica Gel Container

Silica Gel Container with a closing lid held by a small clip.

Downloads
2,222
Likes
302
Rating
4.7
P
PrintablesTeteomat

Pistachio Bowl | Snack Container with Shell Holder | Modern Design - Contenitore Pistacchi 2 in 1 | Snack Bowl con Porta Gusci | Design Moderno

Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…

Downloads
2,219
Likes
595
Rating
4.83
P
Printabless7emar

IKEA SKADIS Bin / Shelf / Container

Bin for IKEA SKADIS. The model has attachable hooks so they can be easily reprinted if they ever break. Sizes Small Size: L: 90mm / W: 90mm / H: 40mm Medium Size: L: 170mm / W: 90mm / H: 40mm Large Size: L: 245mm / W: 90mm / H: 40mm…

Downloads
2,178
Likes
373
Rating
5
P
Printablesbriancmoses

Gridfinity AAA Battery Containers

I have a bunch of Panasonic Eneloop AAA batteries and I've learned that they're slightly wider than a standard AA battery. As a result, I figured I'd go ahead and design my own #gridfinity container. I was able to modify Jamie's OpenSCAD…

Downloads
2,175
Likes
150
Rating
4.75
P
Printablesgimpelginster

Modular Skadis Container System (M)

These are some skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. They are compatible with my Modular Skadis Container System (S) , and (L) .…

Downloads
2,133
Likes
884
Rating
4.81