1 / 5
Silica Box | Silica Gel Container | Fits Standard Spool — image 1
1 / 5

Silica Box | Silica Gel Container | Fits Standard Spool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool.

Rating
4.947 / 5
Likes
458
Downloads
3,362
Makes
57
Views
14,055
Reviews
57

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool.
The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven.
Holds over 100g of silica gel!

IMPORTANT!
To create the grid, the following perimeters must be set:

  • Vertical shells -> 6 perimeters
  • Solid layers Top and Bottom -> 0
  • Infillpattern -> Grid
  • Infill -> 30% or higher (30% = 2,5x2,5mm grid)
  • Print infill slowly to get all the squares connected
Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :)

Tags