1 / 5
Silica Box | Silica Gel Container | Fits Standard Spool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool.
- Ocena
- 4,947 / 5
- Polubienia
- 451
- Pobrania
- 3326
- Wydruki
- 57
- Wyświetlenia
- 13 916
- Oceny
- 57
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 57) (Komentarze: 72)Remiksy (2)Kolekcje (731)Powiązane
This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool.
The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven.
Holds over 100g of silica gel!
IMPORTANT!
To create the grid, the following perimeters must be set:
- Vertical shells -> 6 perimeters
- Solid layers Top and Bottom -> 0
- Infillpattern -> Grid
- Infill -> 30% or higher (30% = 2,5x2,5mm grid)
- Print infill slowly to get all the squares connected

| Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :) |