Search results: covers

Sort order

1,723 models

P
PrintablesDevmiser

Tissue Box Covers

Tissue Box Covers in four decorative designs - Flowers, Bamboo, Hierolgyphics and Circle Pattern These covers fit Puffs brand Ultra Soft tissues perfectly, but may fit other brands as well. The supports can take some patience to remove,…

Downloads
1,596
Likes
381
Rating
4.75
P
PrintablesGizmo Gurus

DecoEdge: Light Switch Wall Plates – Single, Double, and Triple Gang Covers

Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…

Downloads
1,214
Likes
114
Rating
4.83
P
PrintablesJ-Verhaar

Anycubic Kobra 2 Neo / Kobra 2 Rail - Extrusion Slot Covers

Don't print all files look at what you need. Covers up the v-slot rails on the bottom so that nothing can fall into it. Easy to remove and install designed with loose tolerances. Settings: Prusaslicer with anycubic profiles 0.2mm layer…

Downloads
797
Likes
99
Rating
4.8
P
PrintablesFrankee

Tissue Box Covers

The boxes come in two variants ( two-piece with a perforated cover and one-piece, cover only ) and in two sizes ( 230mm*118mm*65mm and 130mm*130mm*130mm ). Velvet tissue boxes were used as a template for the models. Printing Material: PLA…

Downloads
482
Likes
129
Rating
5
P
PrintablesTomáš L

Peugeot 807 Headlight Washer Covers

If you have lost headlight washer covers of your Peugeot 807, you can print them. :o)

Downloads
444
Likes
26
Rating
5
P
PrintablesAnkhadia

Super Mario Question Block Tissue Box Covers

The question marks are set so the bed side will be showing for a nice finish.

Downloads
341
Likes
83
Rating
5
P
PrintablesFrankee

Egyptian Tissue Box Covers

The boxes come in two sizes ( 230mm*118mm*65mm and 130mm*130mm*130mm ). Velvet tissue boxes were used as a template for the models. Printing Material: PLA Layer: 0.2mm Infill: 20% Supports: NO

Downloads
321
Likes
90
Rating
5
P
PrintablesTascanis

V-Slot Covers for Sovol SV06

Tested different V-slot covers available on this site, as you can see on the makes on my profile, this was the best fitting cover, has a very good press fit but is still easily removable. Available you'll find a file containing every…

Downloads
319
Likes
41
Rating
4.75
P
PrintablesBrian

MR2 Spyder Pull Strap Covers

Using a old belt I had (see link below for one like it) I replaced the stock hard plastic handle and made covers for the top and bottom opening. Recommend printing in a filament that is UV resistant and Heat resistant. Best way for my…

Downloads
247
Likes
11
Rating
0
P
PrintablesTmpx64

Z-Axis Covers - quick and easy print

I designed these to add a bit of variation and help make dust less noticeable. Their main advantage is that nothing needs to be disassembled. They simply slide in from the side through their opening, fitting snugly without the need for…

Downloads
137
Likes
37
Rating
4.91
P
PrintablesTDM465

SDS Mk4i Swerve module covers

Slightly thicker with more zip-tie locations and top screw access holes.

Downloads
68
Likes
4
Rating
0
P
PrintablesJackson O'Steen

PCIE Slot Covers

This is a bundle of 2 PCIE case slot covers as replacements for lost ones. 1 normal form factor, and one small form factor. I hate losing them and seeing this gap in my awesome PC. Thanks for taking a look, and happy printing :) 0.2MM…

Downloads
57
Likes
6
Rating
0
P
PrintablesOmletCat

thumb tack covers

just place onto thumb tacks its that simple! (note: probably best to have thumb tacks slightly angled)

Downloads
50
Likes
17
Rating
0
P
Printableswerz 99

T-Slot Covers for Crosslide

T-Slot covers for the crossslide of my Emco Maximat Super11 lathe. Crossection od profiles measures 11 x 13 mm and have various length. This set fits for my position of the compound rest. Length changes when you change position of the…

Downloads
34
Likes
9
Rating
5
P
PrintablesNerdyOreo

Fuzzy Vorsk VMP-1 Mag Covers

YOU NEED TO RE-ADD OR UN-COMMENT OUT THE P.I.D SETTINGS ON LINE 1318 OF THIS G-Code!! THIS WAS PRINTED ON THE PRUSA MINI WITH INPUT SHAPER THROUGH THE NEWEST UPDATE.

Downloads
32
Likes
2
Rating
0
P
PrintablesBrian

Surface Duo 1 Bumper (covers sim card slot and adds protection on opposite side of USB)

This bumper has more coverage as it covers the Sim card slot and also protects the opposite side of the USB port. ***Simple Bumper for the Surface Duo 1, BUT… I modeled it off the Duo 1 stock bumper as I do not have a Duo 1 any more.…

Downloads
19
Likes
0
Rating
0
P
Printableswerz 99

CDI Ignition Covers

Front and back cover for Rcexl CDI Ignition housing for a modelengine. Uses 60x40x2mm aluminium profile. update 21. Aug 2025: Had to move the switch - so BackcoverV2

Downloads
4
Likes
0
Rating
0
P
PrintablesBigB3D

Electrical Wall Plates Outlet Covers and Light Dimmer Knob

My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…

Downloads
8,634
Likes
1,739
Rating
5
P
PrintablesVector3dArt

PCI/PCI-E Slot Covers - 10 Designs

PCI/PCI-E slot covers with 10 different designs to choose from. Simple easy to print slot covers. Why have boring, plain, generic PCI/PCI-E slot covers when you could have custom covers instead. Covers should be printed in the best…

Downloads
5,252
Likes
1,097
Rating
4.85
P
Printablessporte77

Ender 3 v2 - v slot covers

Ender 3 V2 Drop in Slot Covers (only for horizontal - not vertical). They fit flush- and no need to remove parts. Rather than removing the screws on the left front facing portion of the left frame (and bed rail bed tensioner)- i used Red…

Downloads
4,007
Likes
566
Rating
4.91
P
PrintablesK2_Kevin

Professional Ender 3 v2 Belt Tension Knob Covers

This is a Remix of the knob COVER for the X / Y axis belt tensioner on your Ender 3v2 and others using the same OEM blue knob. ❤ Get your Prusameters… Post your Makes! ❤ You can find my other matching knobs here: Drawer Knob:…

Downloads
2,937
Likes
572
Rating
4.91
P
PrintablesGyoenastaader

Hadley Mirror and Lens Covers

Update September 12, 2022: Added CAD Step files. Mirror covers for the Hadley. The primary cover can be used for the main mirror, and the bottom of the secondary mirror holder. The web mirror is intended to go on top of the web. The lens…

Downloads
2,600
Likes
194
Rating
4.95
P
PrintablesMaverick0197

Picatinny Rail Covers

Edit 09/02/2020: Added clip 6 (hexagons). Edit 03/21/2020: Added Clip 5 and modified all to remove the need for support. Individual slot covers for picatinny rails. 4 different styles.

Downloads
2,532
Likes
440
Rating
4.69
P
PrintablesKimframes

USB Port Covers

Covers for USB type A, USB type B and USB-C Print instructions Set perimeter to 3. The USB-C cover requires thin wall detection to be activated in PrusaSlicer if printing with 0.4 nozzle. 3mm brim is also recommended.

Downloads
2,489
Likes
324
Rating
4.92
P
PrintablesRoland Deschain

Flush V-Slot Rail Covers (Parametric) (Pre-sized for Ender 3 V2)

I needed v-slot rail covers and wanted to be able to customize the lengths so I could work around my other upgrades. My design goals were: Flush top with the v-slot rail (others either extended over the top or were recessed into the rail)…

Downloads
2,188
Likes
280
Rating
4.91

FlashForge Adventurer 5M Toolhead Covers

Overview Need a custom toolhead cover? Maybe your original was damaged? Take your pick of chamfer(sharp edge) or fillet(round edge) from the designs I have made or if you do not like them I have included the parametric source file for you…

Downloads
1,967
Likes
394
Rating
5

Creality K1 silent toolhead covers (5015 or 5020 fan)

V4 update (September 29, 2024): Removed the ugly circular overhang at the bottom Changed duct geometry for better airflow alignment Supports inside the ducts are no longer needed These toolhead covers allow to install a 5015 or 5020 part…

Downloads
1,642
Likes
338
Rating
4.86
P
PrintablesMateusz Tokarz

Nut Cap Set M3–M10 – Dome Hex Covers

BOM: Printed with ROSA3D High Speed PLA Army Green A complete collection of six dome-style nut caps covering the most common metric sizes: M3, M4, M5, M6, M8 and M10 . Perfect for furniture builds, printers, CNC machines, enclosures,…

Downloads
1,584
Likes
706
Rating
5
P
PrintablesGeckex

Prusa Enclosure covers

Prusa enclosure covers for the mounting holes in the Prusa enclosure (see picture). Initially a made it for visual reasons, but it reduces also the smell/steam getting out of the enclosure a lot! No tiny little hooks or other unprintable…

Downloads
1,534
Likes
454
Rating
4.93
P
PrintablesKai

MK4 / MK3 Extrusion Covers

Simple extrusion covers to protect against dust and filament residues. They fit very well and can be easily removed with a flat screwdriver. Interestingly, I have two different lengths of rear extrusions on my printers. It seems that on…

Downloads
1,512
Likes
404
Rating
4.94
P
PrintablesKN16

M-LOK Rail Covers and Matching Handbrakes

Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great! The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or…

Downloads
1,370
Likes
428
Rating
4.83
P
PrintablesRain And Storm

Protective Covers for MC4 Solar Panel Connectors (plugs, caps, moisture, water, dust)

Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…

Downloads
1,327
Likes
124
Rating
4.92
P
PrintablesDarien

Snapmaker U1 Interior Grille Covers

8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…

Downloads
1,312
Likes
173
Rating
4.94
P
PrintablesOnejensen

Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro | V-Slot Covers

Tired of the typical profile fillers that look almost the same as original? Introducing the ULTIMATE PROFILE COVERS!!! Turn your old (or not that old) printer into a modern looking printer with these simple accesories. Slide them in like…

Downloads
1,304
Likes
243
Rating
3.75
P
PrintablesHenlor

Creality K1 Cable Raceway Covers CAD

The step files is meant to be used as an asset in CAD software. But as it has a very simple geometry it can be printed in Vase mode. I added an optimized version for the vertical cover, cut in half and added an angle for the overhang on…

Downloads
1,216
Likes
247
Rating
5
P
Printablesmuddymaker

Fishing Lure Treble Hook Safety Covers

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Quick and easy print that will save your fingers and time…

Downloads
1,196
Likes
236
Rating
5
P
Printableskubasi3

Key covers

Key covers in 3 versions Round bow with 23 millimeters diameter Round bow with 24 millimeters diameter Rectangle bow Use 0.25 mm nozzle for bests labels. You can use all materials, but one cover shut be from one kind. I prepared some…

Downloads
1,088
Likes
247
Rating
5
P
PrintablesKirby Downey

Detailed AT-AT Covers

The files that had problems have now been updated and fixed. These are covers and replacement parts for the Detailed AT-AT I made for those who wish to cover the internal detail of the model. The back piece and the entire front leg is the…

Downloads
1,067
Likes
251
Rating
4.8
P
PrintablesScout339

Scout's Light Cap (light covers)

Summary This is my version of the One Hundred Concept's Light Cap. There are 3 sizes to chose from, so there should be one that works for a plethora of weapon lights. See the attached photo list for what sizes to print for each specific…

Downloads
1,037
Likes
49
Rating
5
P
PrintablesPreston

Ender 3 v2 Belt Tensioner Covers

Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament brand: 3D Solutech Filament color: steel Filament material: PLA

Downloads
1,008
Likes
156
Rating
4.83
P
PrintablesKen226

Voron 2.4 Z axis belt covers with cable routing

This is a remix of the Z axis belt covers from TeamFDM. I love Akio's belt covers, as the access underneath lets me route my webcam cable under the covers, but they are too tall to fit under the Z axis linear bearings. My remix version…

Downloads
1,006
Likes
120
Rating
5
P
PrintablesKN16

MLOK Rail Covers (5.5") and Handstop

MLOK 5.5" rail guards and handstop for any MLOK series handguard. STL files and Solidworks files for each part attached. Use Supports touching buildplate only.

Downloads
986
Likes
201
Rating
5
P
PrintablesJeepingJohnny

i3 MK3S Z-Axis Dust Covers!

V2.0 Now available! Snapable and Tighter! https://www.printables.com/model/168793-i3-mk3s-z-axis-dust-covers-v20-snapable ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I remixed these for my i3 MK3S. They now work…

Downloads
970
Likes
192
Rating
4.87
P
PrintablesMateusz Tokarz

Dome Nut Covers V2 | Perfect Fit (M3-M16)

BOM: Printed with ROSA3D High Speed PLA Dark Blue This is the V2 (Version 2) update of my decorative nut covers. Based on feedback and testing, I have re-engineered the internal tolerances to ensure a perfect friction fit . These caps…

Downloads
966
Likes
512
Rating
5
P
PrintablesKen226

Voron 2020 Rail Slot Covers

These are low profile 2020 slot covers. They maximize the amount of space left inside the slot for wire routing. Print flat side down. I included a .stp file, so you can change the model to create custom lengths. I have included .stl…

Downloads
962
Likes
104
Rating
5
P
PrintablesAvel

Ender 3 Pro Push-in V-slot covers (minimalist)

I just measured these out and put them all in one place for an easy grab. I also notched the two inserts titled "Power Supply" to adjust for the screw heads holding the power supply on. Remove safely from bed as not to bend. I aligned…

Downloads
961
Likes
126
Rating
4.75
P
PrintablesMichael Doe

Turbofans / Aerocovers 15″

Tested and printed without issues using Cura slicer. I've designed fake BBS 'turbofan' wheel covers for my winter tires using 3D printing, adding a touch of style and humor to the mundane task of winterizing my car. Turbofan wheel covers…

Downloads
923
Likes
79
Rating
0
P
PrintablesMarcus Kring

VW Golf mk2 hella covers

it's made to be pushed on but works best with a layer off glue on the edge

Downloads
919
Likes
97
Rating
5
P
PrintablesDannyD

Slot Covers for Ender 3 V2 Neo

I have these covers in so many colors and they make my printer look great. It also helps with keeping your printer clean. I printed them at 0.16mm and 0.20mm layer height.

Downloads
910
Likes
120
Rating
4.92
P
PrintablesHenlor

Creality K1 MAX Cable Raceway Covers CAD

Huge thank you to @kukynas for adapting the step files to the K1 Max Dimensions. As it has a very simple geometry it can be printed in Vase mode. I added an optimized version for the vertical cover, cut in half and added an angle for the…

Downloads
906
Likes
185
Rating
4.89
P
PrintablesAntherias

Screw for fan covers

Screw for mounting flat fan covers on 92mm fans etc. Tested with Noctua NF-A9x14. Screw thread width is approx 4.8 mm. Screw lenght is approx 13.5 mm. It's more of a press fit rather than a screw, but it gets the job done where little to…

Downloads
905
Likes
49
Rating
5
P
PrintablesJL O

Z-Axis Dust Covers for Creality K1C or k1 + cam

Compatible con K1c, supongo que también será compatible con la k1 + cámara.

Downloads
902
Likes
135
Rating
5
P
PrintablesRip's

Fishing Lure Treble Hook Covers

A set of four treble hook covers. The basic top covers come in two sizes and are good for storing lures. They are also very quick and easy to print. The Full Slide cover will accept different sized hooks and is probably the best one. I…

Downloads
877
Likes
190
Rating
5
P
PrintablesSnakeFist

Flashforge Adventurer 5M (AD5M) Cable Channel Covers

As I'm rethinking my printer setup, I wanted to cover up the ugly wires leading to the LCD and switches that I retrofitted to the case. Hides them pretty nicely. Fits on both sides of the case! For printing, just lay it on the bed…

Downloads
865
Likes
177
Rating
4.86
P
Printablesdonutsatwork

Asus ROG Ally - Thumbstick Covers/Locks

I made thumbstick covers/grips/locks, whatever you call them. There is an STL for one that works without thumb grips. And an STL for one that works WITH thumb grips. (I've personally tested this with Skull&Co thumbgrips and it seems to…

Downloads
844
Likes
68
Rating
4.5
P
PrintablesGizmo Gurus

DecoEdge: Outlet Wall Plates – Single, Double, and Triple Gang Covers

Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…

Downloads
839
Likes
199
Rating
1
P
Printablesbr4in

ExtrusionAl Covers for 3030 T-Slots

This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…

Downloads
815
Likes
142
Rating
4.96
P
Printablesantagonizerr

US, Canada, Scotland Trailer Hitch Covers - Remix

This is another remix of the pro-Trump trailer hitch cover by someusernamehere that keeps getting removed. I wasn't a fan of the message but I really like the design, so I decided to remix it into something that makes a better statement.…

Downloads
810
Likes
120
Rating
4.2
P
PrintablesJMcK

MK4 Z-Stepper covers

It seems like it would be super irritating to remove bits of debris from the MK4's Z-Stepper mounts. While it seems much less likely to drop a “nozzle drool” line than the MK3 was, it still seems like a good idea to keep them covered.…

Downloads
774
Likes
143
Rating
4.92
P

Outlet Plug Safety Covers

This model is designed to be inserted into an electrical outlet to add safety to unused outlets, especially for babies or young children.

Downloads
757
Likes
59
Rating
5
P
PrintablesViking3DK

Flashforge AD5M & AD5X covers 27/10/26

One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…

Downloads
752
Likes
156
Rating
4.8
P
PrintablesAuroraProjects

Battery Terminal Clip on Covers for lifepo4 280ah cells

Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.

Downloads
743
Likes
56
Rating
5
P
PrintablesMateusz Tokarz

Hex Bolt & Nut Covers | M3 to M16 Set

BOM: Printed with ROSA3D Starter PLA Red Protect your exposed hardware, prevent scratches from sharp threads, and give your projects a clean, finished look with this comprehensive set of bolt and nut covers. Covering metric sizes from M3…

Downloads
730
Likes
330
Rating
5
P
PrintablesKimframes

USB Port Covers v2

Covers for USB type A and USB type B

Downloads
722
Likes
147
Rating
4.9
P
PrintablesOstella3D

Texas Instruments Calculator Front Covers (TI-84 Plus, TI-84 Plus C, TI-90 Titanium, and similar)

I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…

Downloads
719
Likes
41
Rating
4.7
P
PrintablesxXDFAXx

Sovol SV08 Z Belt Dust Covers

Tired of plastic debris getting into your Z motor pulleys? Oh, didn't know that was a problem? Small bits of plastic from printing will make its way into your Z motor pulleys and fill up the teeth. This will cause stretching of the belt…

Downloads
705
Likes
135
Rating
4.92
P
PrintablesMeister Edel

3 different Prusa MK4 Z axis dust covers :)

Hello everyone :) There are already many different solutions to prevent dust or small plastic parts from falling into the hole in the Z-engine. Unfortunately, none of them appealed to me so far, so I developed my own solution. While my…

Downloads
701
Likes
128
Rating
4.96
P
PrintablesAdafruit

AirPods Max Headbands and Ears Covers

3D print custom accessories for AirPod Max headphones! These ear covers and headbands are LEGO compatible so you can personalize your headphones! Use LEGO DOTS tiles to make mosaic works of art and adorn them on your ears with 3D printed…

Downloads
694
Likes
109
Rating
5
P
PrintablesPekapeque

Flush Cutters Grip Covers

Covers for the arms of your flush cutters in case the original ones started to fall apart.

Downloads
694
Likes
293
Rating
4.77
P
PrintablesMatrixRay

Voron 2.4R2 Z Belt Covers

These covers allow for hidden cable routing for wires going up the Z Extrusions, they also have a cutout in case you didn't leave enough room under the Z Rails(most people don't :P). In case you want to add some extra pop to your covers,…

Downloads
679
Likes
61
Rating
5

Fan Covers

Some fairly simple fan covers for both the Extruder Cooling Fan as well as the Print Cooling Fan. I used modifier shapes to take away top/bottom layers for the "grills". 3MF files are available for PrusaSlicer but i also included the stls…

Downloads
666
Likes
58
Rating
4.73
P
PrintablesGuyzerr

XT-60 Plug Covers

*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** I found a great plug cover on Thingeverse for XT-60 plugs. The original files didn't have a large enough retaining pin…

Downloads
656
Likes
87
Rating
5
P

Cable Covers for HSW

These are a set of cable covers which are aesthetically consistent with the honeycomb storage wall. They will cover light-weight cables (usb-c or led wires), are modular and easy to route, and are easily removable to change the cable…

Downloads
638
Likes
305
Rating
5
P
Printablessmonteiro

BMW R1200 GS K25 - Frame covers

The BMW R1200 GS K25 miss 2 covers on the frame on the right side. Decided to design and print 2 covers to fit there. I print them in PETG 0.2mm. If you print it share here the result in the make section. Enjoy.

Downloads
636
Likes
48
Rating
5
P
Printablesgrizzie17

Modular Switch Plate Covers

Modular system for creating covers for electrical wall boxes. STL and STEP files have been provided such that you can put whichever components together to create an electrical box plate cover to suit your needs. Simply pull either the…

Downloads
635
Likes
221
Rating
5
P
Printablesw3rN42

Mesh covers for Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners

These are two mesh covers to replace the original side panels of the Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners. The original side panels are completely closed and the cooling relies on the two small intake fans at the bottom of the…

Downloads
631
Likes
21
Rating
5
P
PrintablesMarwyn

BambuLab X1/C Ventilation Covers - MRW

EDIT ------------------------------------------------------- 2023.02.08. Added step files for both covers (side, front), without text, logo, motiv… Feel free and make some nice design for your self.…

Downloads
628
Likes
177
Rating
5
P
Printablesperfuzion

Steampunk Respirator/Gas Mask with Gear Filter Covers

Created a remix of a normal respirator (by Budash) and added extra holes to connect pipes/tubes and straps for steampunk gas mask. This was my first 3D print in flexible TPU (0.2mm resolution, 20% gyroid infill, 60 degree concentric…

Downloads
627
Likes
215
Rating
5

[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount

This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…

Downloads
623
Likes
78
Rating
4.8
P
Printablesmtyo

2019+ Chevy Silverado Stake Hole Pocket Covers

Designed up this stake pocket hole filler to fill the rear holes in the 2019 Chevy truck I just received as a work truck. We just removed the cap that was installed by the dealer. The front pockets had covers but the rear didn't. I tried…

Downloads
619
Likes
63
Rating
5
P
PrintablesefficientAF

Radiomaster Pocket: Grip Covers

I needed something to make it easier for me to find a comfortable grip for the Radiomaster Pocket so I made these. Currently I have the no stick holder version available but I'll post other versions with the stick holders. I wouldn't…

Downloads
609
Likes
84
Rating
5
P
PrintablesJeepingJohnny

i3 MK3S Z-Axis Dust Covers V2.0 ~ Snapable!

Description Dont leave your Z Axis Naked! Now they fit much better and do not move around! I tightened up the print. Printed from the top. This adds the bed texture to the top and prints at higher quality without any bridging. Print…

Downloads
603
Likes
126
Rating
5
P
Printablesfluetke

Twist-on aglets (Shoe Lace Covers/endcaps)

Don't we all know this problem? You're tying your shoes and suddenly the little plastic piece holding the string ends together, flies off into the sunset as you pull the strings tight. Oh no - the strings will start fraying and pull apart…

Downloads
594
Likes
117
Rating
4.67
P
PrintablesLuckyMenace

Magura MT5 MT7 MT8 Caliper Covers (UPD 2024)

As described above - 4 off versions currently. I had better success printing in PETG with textured spring steel sheet, as the PLA did not want to seem to stay stuck - YMML. Updated 12/11/2022 to include ‘Nukeproof’ logo type model…

Downloads
592
Likes
76
Rating
5
P
PrintablesAKA

Single Coil Guitar Pickup Covers

This was a project I created when rebuilding a Squire Strat/Starcaster mashup. You can judge that's fine; I used what parts I had to learn finishing, wiring and setup…free is the best when learning. :) I've included hole templates so you…

Downloads
590
Likes
58
Rating
5
P
PrintablesIR Blinx

VW T4 Tailgate Lock covers

Covers for the Tailgate lock mechanisms in a VW T4 Transporter. Separate VW logo which can be printed in another colour and glued in

Downloads
581
Likes
53
Rating
0
P
PrintablesIvan Urbánek

Springy pipe wall covers

Collection of flexible pipe wall covers that wrap around the pipe and are held there by internal springs. Updates 2025-7-7: Release 2 with larger sizes up to ø45 Print and slicing instructions Pick the closest size and scale up or down in…

Downloads
573
Likes
296
Rating
5
P
PrintablesMichał Trybus

Maximally constrained Z-belt covers for Voron 2.4

This is part one of a remix of 2 voron mods: the 2.2 Z-belt covers with hidden cable routing and the matching cover inserts. Its purpose is to keep as much heat inside the chamber as possible by shrinking the opening for the Z-belt in the…

Downloads
564
Likes
90
Rating
4.88
P
PrintablesZaxis

Bed Leveling Arrow Wheel or Wheel Covers for Ender 3 Pro or compatible

Update 2: Added a version that is a cover ring that snaps onto the existing Ender 3 wheels so you don't have to print a whole new wheel if you don't want to (less clean finished product but no insert needed.) The cover snaps firmly onto…

Downloads
559
Likes
107
Rating
5
P
Printablesjpdesign

PCIe Slot Covers

These covers are available in 2 versions: a solid and an airflow model. Keep in mind! the airflow model is not as sturdy as the solid one. Print like this:

Downloads
556
Likes
95
Rating
5
P
PrintablesKen226

Voron 2.4 Z Axis Pulley Covers, Hex Infill

This is a set of Z axis pulley covers for the Voron 2.4. They are designed to match my hex infill fan grill and skirts. These are a drop-in replacement for the default covers. If you want to do a multicolor print, simply swap filament at…

Downloads
555
Likes
119
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.2 - ENGINE CRANCKCASE + ENGINE COVERS

Hello, here you are the 2nd part of my motorcycle. Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame In this case it is engine crankcase, the engine…

Downloads
546
Likes
49
Rating
5
P
PrintablesOurAngryBadger

Battery Terminal Covers for M8 LiFePO4 Batteries

Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…

Downloads
539
Likes
33
Rating
4.8
P
Printablesrobbanprintar

VW T5 seat mount covers

I needed something to cover the holes in the floor where you mount the seats. Print with PETG or PLA+. I think PLA could be a bit too brittle for the snap fit to work. Fits my VW T5 Caravelle -12.

Downloads
529
Likes
44
Rating
4.67
P
Printablesbellingeri

PlayStation 3 Slim Foot - screw covers

During a move I lost a pair of PS3 slim feet: here they are! One foot does not hide the screw hole; in this case the second version is needed, which can be fixed with double-sided tape.

Downloads
520
Likes
45
Rating
3
P
PrintablesTAA Design

Ramadan Lantern String Lights Covers

Ramadan Lantern String Lights Covers Count 10. It fits any Christmas lights, please see the gif below. I included the Amazon link to the lights I used for this project. Ramadan Kareem! :) https://a.co/d/fPJl1jV

Downloads
506
Likes
85
Rating
0

Artillery Genius / Genius Pro / X1 / X2 - Media Port Covers

Artillery Genius / Genius Pro / X1 / X2 - Media Port Covers

Downloads
499
Likes
66
Rating
5
P
PrintablesMongooseTNM

REV Robotics MAXSwerve Covers

A collection of covers and protectors for REV Robotics MAXSwerve that 2811 has been using on our modules. The Gear Dust Cover has grease holes so you don't have to disassemble the module to regrease. If you use Fusion 360 you can open the…

Downloads
495
Likes
17
Rating
5
P
Printablesxistor

Light Switch Covers Australia

Some covers to fit standard Clipsal 2000 light switches common in Australia. There is some blank covers as well as some to accommodate a Tuya 4 way switch and one for the simple Tradfri Switch. Useful for stopping your not so tech savvy…

Downloads
494
Likes
44
Rating
5
P
PrintablesMateusz Tokarz

Nut Cap Set M12 M14 M16 – Dome Covers

BOM: Printed with ROSA3D High Speed PLA Army Green This set contains three dome-style nut caps sized for M12, M14 and M16 hex nuts (24 mm, 22 mm and 19 mm AF). They provide a clean, rounded finish ideal for machinery, furniture, workshop…

Downloads
486
Likes
117
Rating
5