Search results: cr2

Sort order

Counting matching models…

P
PrintablesDalkain

Gridfinity Battery Trays (AA, AAA, AAAA, 18650, CR123, CR2, 9V, 21700, C, D)

These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…

Downloads
22,755
Likes
3,537
Rating
4.98
P
Printablesid10tapproved

Gridfinity Stackable Battery Storage for Cylindrical & 9V Batteries (AA, AAA, AAAA, C, D, CR2, CR123, MN21/A23 & 9V)

Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…

Downloads
5,919
Likes
2,300
Rating
4.97
P
PrintablesJungl3

HSW Caliper and CR2032 Holder

Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…

Downloads
5,447
Likes
901
Rating
4.95
P
Printablesbaua1356

Battery Crate Batterie Box AA / AAA / 9V / CR2025 / CR2032

Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.

Downloads
4,805
Likes
244
Rating
4.85
P
Printablesdhiltonp

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Downloads
2,854
Likes
547
Rating
4.9

CR2032 Coin Battery holder MK3

Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…

Downloads
2,723
Likes
386
Rating
4.87
P
Printablesmintonette

CR2032 Coin Cell Battery Holder

Holder for a CR2032 coin cell batteries. Battery is securely held in place Single (3V), double (6V) and triple (9V) versions Designed for use with breadboard jumper/dupont wires or bare wire Total holder thickness is 7.3mm for the single…

Downloads
2,525
Likes
632
Rating
5
P
PrintablesLukas

Gridfinity Battery Holders (CR1632, CR2032, CR123(A), LR44)

Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…

Downloads
2,208
Likes
217
Rating
4.94
P
PrintablesNERDCORNER

CR2032 Battery Container for 15pcs

Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/

Downloads
1,630
Likes
712
Rating
4.92
P
Printableshalfbit

Half-height beer crate for CR2032 coin cell batteries

A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…

Downloads
1,366
Likes
235
Rating
4.97
P
PrintablesKryštof

CR2032 and LR44 Button Cell Battery Box

This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…

Downloads
1,165
Likes
313
Rating
4.94
P
PrintablesPopcorn

Battery Storage (CR2032 & CR2025)

Minor redesign of jbergmans' 2032 battery storage. Can hold up to 8 batteries of types CR2032 and CR2025. Also see my model for CR1225 batteries: https://www.printables.com/fr/model/874743-cr1225-battery-holder Very easy to print, small…

Downloads
1,141
Likes
157
Rating
4.79
P

Gridfinity CR2032 + LR44/SR44 Coin Cell Battery Holder

This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…

Downloads
1,034
Likes
123
Rating
5
P
PrintablesMart80

Stackable battery beer crate / box /AA/AAA/9V Block/CR2032

Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.

Downloads
983
Likes
102
Rating
5
P
PrintablesJerr_074

cr2032 battery Gridfinity holder

This holder can contain 8 individual cr2032 batteries. Printed on a Prusa Mini in Orange Prusa PLA (Not Prusament) Part of the Gridfinity storage solution. What is that you say?

Downloads
894
Likes
84
Rating
4.86
P
PrintablesAntimaterie

stackable beer crate for CR2032 and other button cells version 2

I love the beer crates for storage! My button cells needed a new home, so I remixed again :-) This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse. I made some changes to the original…

Downloads
868
Likes
182
Rating
4.84
P
PrintablesNikolica

Gridfinity battery holder CR2032 and LR44  / AG13

First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…

Downloads
854
Likes
86
Rating
5
P
PrintablesSlowMaker

Mini LED Tea Light (CR2032 + 5mm LED)

A small holder for a 5 mm LED and a CR2032 coin cell. Snap the pieces together to make a simple, battery-powered tea light. No glue or soldering needed. Print it upside down, no support needed. TIP: flickering LEDs are available and would…

Downloads
836
Likes
342
Rating
5
P
Printablesjerrydi

CR2032 Battery Holder

CR2032 Battery Holder 1x 2x 2x2

Downloads
797
Likes
96
Rating
4.43
P
PrintablesFrankWL

Batterie Box CR2032

Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CD2032. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…

Downloads
795
Likes
65
Rating
4.75
P
PrintablesSimon

CR2032 to CR2450 adaptor

I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.

Downloads
701
Likes
61
Rating
5
P
Printablesschiko

CR2032 Box for 5 Cells – Print-in-Place

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Pre-colored .3mf file included. Best to be printed in wall…

Downloads
688
Likes
140
Rating
5
P
PrintablesShwalamazula

Coin Cell CR2032 Reference Model

Since there is a battery holder design contest going on, I thought it may be useful to have a reference model of a CR2032 battery for which holder can be created. The model is measured from an Energizer CR2032 battery. Model can be…

Downloads
682
Likes
10
Rating
5

CR2025 Coin Battery holder

Simple but sturdy storage for 10 CR2025 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 2.5mm See the original model under “This…

Downloads
681
Likes
82
Rating
4.92
P
PrintablesSquareMesh

Honeycomb Wall Holder - Caliper + CR2032 Battery

Holder for digital / vernier caliper. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Hex…

Downloads
664
Likes
103
Rating
4.92
P
PrintablesICT Avatar

AA/AAA/CR2032/9V/ Battery box SD/Micro SD Box

Storage Box for AA/AAA/CR2032/9V Battery or /SD/Micro SD/or small parts 3 Type of lid type 1 full closed no stakable option no inscription type 2 for stakable option no inscription type 3 for stakable option with inscription infill 10 %

Downloads
638
Likes
142
Rating
4.5
P
PrintablesKevin

CR2032 Holder

Printed with Prusament PETG Jetblack 0.3mm no rafts or supports required.

Downloads
635
Likes
43
Rating
4.69
P
PrintablesNERDCORNER

CR2032 Battery Container for 10pcs

Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/

Downloads
625
Likes
164
Rating
4.75
P
PrintablesOscar A

CR2032 Coin battery container

Simple CR2032 coin battery container.

Downloads
602
Likes
72
Rating
5
P
PrintablesMegatech

CR2032 Battery Container 6pcs

Remix of container for CR2032 batteries.

Downloads
601
Likes
242
Rating
5
P
PrintablesRod

CR2032 Battery Storage

Update 20240531: Fusion 360 file uploaded for customization. Battery name text could also be changed in PrusaSlicer by cutting the old text away and using PrusaSlicer's text command. Storage case for CR2032 batteries. Sliding lid allows a…

Downloads
597
Likes
57
Rating
5
P
Printablestony

CR2032 battery holder

Just a simple 2032 battery holder, holds 10 batteries

Downloads
585
Likes
71
Rating
4.88
P
PrintablesCattus Printus

Ultimate Modular Battery Holder (AAA, AA, CR2, C/R14 , D/R20, Coin, 9V/6F22, 18650)

This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…

Downloads
585
Likes
75
Rating
4.91
P
Printablesplomdawg

Gridfinity Battery Box: CR2032/CR2016, CR2450, CR1620, and 357/303/SR44/A23/MN21/AAA slots

This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries

Downloads
565
Likes
79
Rating
4.5
P
PrintableseXthemaX

CR2032 Battery Holder Case

I've always wanted to use this kind of coin cell battery holder for a project, and finally the time has come.. I am sharing only the battery part since my top secret project is on its early development stages. Hope you'll find the battery…

Downloads
545
Likes
57
Rating
0
P
PrintablesFunFunBoy
Downloads
541
Likes
78
Rating
5
P
Printablesscheff

Gridfinity 1x1 Battery Storage CR2032 & CR2430

Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill

Downloads
536
Likes
53
Rating
4.5
P
PrintablesChrisE

CR2032 Battery Holder

Added CR2032 Text works also with CR2025

Downloads
531
Likes
61
Rating
4.78
P
PrintablesEivind Husby

CR2032 LED Clip

Inspired by this design by arcaneoctopuslab: https://www.thingiverse.com/thing:4907153 I really liked the simplicity, but his design assumed LED's with longer connectors than the ones I use, so I made my own version that could support…

Downloads
524
Likes
77
Rating
4.63
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Downloads
467
Likes
44
Rating
5
P
PrintablesCarter

CR2032 Stackable Beer Crate

A remix of CAD-Guy's stackable beer crates that holds CR2032s. It's shorter than the standard crate, but I left enough vertical space to support the “hand holds” such that I could still fit a finger through. Another CR2032 remix was made…

Downloads
461
Likes
70
Rating
4.9
P
Printableslacop

CR2032 (and smaller) battery holder insert for Bierkiste

Print the empty Bierkiste and this insert. Two of them stack on top of each other and fit inside the Bierkiste. Holds up to 20 pieces of CR2032 or smaller (CR2025 etc) coin cell batteries. Not very print-optimized yet: the walls could be…

Downloads
460
Likes
68
Rating
5
P
PrintablesBram

CR2025 Coin cell Battery #Gridfinity organizer

Design description This is a gridfinity holder for 10 CR2025 Coin cell batteries. Block area is 1x1, and has a height of ⅔, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…

Downloads
455
Likes
42
Rating
5
P
PrintableseXthemaX

CR2032 Led Light Base

I needed a simple and small led light base for the small prints and models I have. The easiest way for me was to modify a cheap cr2032 coincell battery operated tealight design. So I did it.. It requires soldering some cables to the LED…

Downloads
443
Likes
92
Rating
4.33
P
PrintablesAgentPayne

Gridfinity CR2032 Battery Holder

Holds 5 CR2032 coin batteries in a 1x1 Gridfinity container

Downloads
439
Likes
64
Rating
4.25
P
PrintablesLupilpl

CR2032 holder - tealight led

CR2032 holder good for small led lamp or for other projects with battery CR2032.

Downloads
423
Likes
87
Rating
5
P
Printablesskroob

Update! - Stackable battery box (AA - AAA - 9V Blocks - CR2XX)

Deutsch: Inspiriert durch das Design von Marzochi ( https://www.thingiverse.com/thing:5389119 ) habe ich meinen eigenen Bateriehalter gemacht. Er ist stabiler und auch stapelbar. Eine einheitliche Grösse macht es möglich auch AA, AAA…

Downloads
414
Likes
40
Rating
4.8
P
PrintablesLuke

Half-height CR2032 / CR2477 beer crate battery containers

Half-height beer crate style containers for CR2032 and CR2477 coin cell batteries. Can be used separately or stacked after gluing the stacking piece to the bottom. The CR2032 container can fit 28 batteries while the other one should fit…

Downloads
411
Likes
40
Rating
5
P
PrintablesQuesabyte

CR2032 Battery Storage

Best results came from being printed in PETG.

Downloads
410
Likes
80
Rating
4.5
P
Printables100prznt

Battery Tray (16x AA, 16x AAA, 4x CR2032)

The tray holds a total of 16 AA batteries, 16 AAA batteries and 4 CR2032 batteries. Print instructions The tray should be printed upside down to get a fine top side. Glue the bottom plate into the holder with some glue.

Downloads
405
Likes
46
Rating
5
P
Printablesgiobber

Gridfinity CR2450 Battery Holder 1x1x2 (with various tolerances)

I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…

Downloads
405
Likes
34
Rating
5

CR2016 Coin Battery holder

Simple but sturdy storage for 10 CR2016 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 1.6mm See the original model under “This…

Downloads
402
Likes
38
Rating
5
P
PrintablesAugustMcDaniel

CR2032 LED Clip of Happiness - Single LED and cr2032 battery clip

This is a small clip I designed to hold one CR2032 battery and one LED. I was designed to make lighting tabletop gaming terrain easy and fun. Please consider supporting me and my work at patreon.com/augustmcdaniel

Downloads
396
Likes
94
Rating
4.67
P
PrintablesMMCC Designs

CR2032 Hex Helix Holder

This CR2032 holder was designed around two interlocking half-twist hex helices to provide an interesting look for this functional print. The inner tray slots hold twelve CR2032 batteries securely preventing the batteries from falling out,…

Downloads
379
Likes
74
Rating
4.56
P
PrintablesTuan Pham

Gridfinity Battery Holder (CR2032)

I created two models, each specifically designed for CR2032 batteries, with gridfinity dimensions of 1x1x3 and 2x1x3.

Downloads
374
Likes
28
Rating
3.67
P
PrintablesBrownDogGadgets

CR2032 Battery Holder

This CR2032 Battery Holder is a safe way to store coin cell batteries. The batteries snap into the holder but can be easily removed by pressing on the battery from the bottom of the holder to pop it out. There is a version that holds 10…

Downloads
373
Likes
49
Rating
5
P
Printablesprintom

Ikea-Skadis Batterie-Halter CR2032

Stützen auf dem Druckbett aktivieren!

Downloads
355
Likes
57
Rating
5
P
PrintablesBen Graham

CR2032 Coin cell Battery #Gridfinity organizer

A remix of the CR2025 holder with more width to fit the slightly larger 2032 cells.

Downloads
354
Likes
29
Rating
5
P
PrintablesHeavyMetalGuy

CR2032 Battery Box with Label

Scaled up a notch to ease up the tolerances and get the cells out easier

Downloads
352
Likes
37
Rating
5
P
Printablesmintonette

CR2450 Coin Cell Battery Holder

Holder for a single CR2450 coin cell battery. Battery is securely held in place Designed for use with breadboard jumper wires or bare wire Total thickness is 9.1mm Support free print Also check out my CR2032 holder .

Downloads
346
Likes
48
Rating
5
P
Printablesjohn3d

AA & AAA & 9V & CR2032 Battery Box Click&Easy Remix

the battery-box is based on brass_ring 's model. the main difference is that this consists of 2 parts and can be easily assembled with 2 clicks.

Downloads
344
Likes
29
Rating
4.6
P
Printablesdaclasen

Print-in-Place Case for CR2450 Batteries

This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2450 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)

Downloads
341
Likes
46
Rating
5
P
PrintablesMorcatko

Fake CR2032 Battery

This is a fake/dummy battery that allows you to use any larger battery (eg AA or AAA) instead of the low-capacity CR2032 You will need 3D print "part +" 3D print "part -" copper washer (used as "+ contact") M14x20x1 -…

Downloads
338
Likes
269
Rating
0
P
PrintablesRed5

Battery Organizer for AA, AAA, 9V and Cr2032

This organizer holds 60 AA, 65 AAA, 9 9V and 22 CR2032 batteries. I used two colours because the filament ran out during print. I printed it in PLA, using lightning infill. No support needed.

Downloads
331
Likes
45
Rating
0
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder CR2032

UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…

Downloads
331
Likes
14
Rating
5
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Downloads
316
Likes
21
Rating
5
P
PrintablesHologos

Battery organizer (20xAA, 20xAAA, 2x9V and 4xCR2032)

This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15%…

Downloads
313
Likes
48
Rating
5
P
Printables_KaszpiR_

Gridfinity Battery CR2032 holder with hole

About: I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs. Can be used with 6x2mm round magnets used in gridfinity sets. Big hole diameters - the one on the top…

Downloads
303
Likes
27
Rating
5
P
Printableshadessuk

CR2450 Coin Battery holder

Remix of MilStrata Manufacturing's CR2032 battery holder to hold CR2450 batteries. Thanks to RetroGameRevival for the Fusion360 wrangling.

Downloads
298
Likes
21
Rating
5
P
PrintablesBen Scholer

CR2450 Coin Cell Battery #Gridfinity

This is a 1x3 Gridfinity bin that holds 15x CR2450 coin cell batteries. If you'd like it in a different size, let me know!

Downloads
298
Likes
19
Rating
0
P
PrintablesMorganWG

CR2450 Battery Case

Battery case for 10 CR2450 coin cell batteries. Premade Remix from customizable Print in Place.

Downloads
297
Likes
29
Rating
4.5
P
PrintablesTorrid

Gridfinity CR2450

Gridfinity model for 10x CR2450 coin cells

Downloads
293
Likes
63
Rating
0
P
Printablesarscreo

[gridfinity] Coin Cell Battery Box: EASY REMOVAL/ADDING with finger or wedge (CR2032/CR2016, 357/303/SR44, A23/MN21/AAA)

Don't want your coin cells to flip around in their slot when adding or removing batteries? Want an even easier way to efficiently use this functional and space saving design? can hold these coin cells/batteries (2 slots for each group):…

Downloads
291
Likes
56
Rating
4.75
P
PrintablesKnoppersDE

Crystal LED Light with battery (CR2032)

As I wanted a removable battery driven crystal light with an integrated switch, I redesigned the bottom half to fit my needs. (Original: https://www.thingiverse.com/thing:2461569 ) The base of the crystal is designed specifically for the…

Downloads
257
Likes
66
Rating
5
P
PrintablesVookimedlo

CR2032 Battery Holder

Successfully printed using the PLA PM Metallic Green. Printer: Prusa Mini Layer Height: 0.15mm Infill: 15% Supports: None Other batteries holder having the same design: https://www.printables.com/cs/model/31365-aaa-battery-holder…

Downloads
244
Likes
49
Rating
4.8
P
Printablestgt12

Slim Profile CR2032 Case with Print-In-Place Hinge

This is a portable CR2032 case that measures just ~6mm thick with a top that snaps close. The button cells are held by clips. The positive and negative marking holes serve to suggest the most secure orientation to place the batteries, and…

Downloads
244
Likes
38
Rating
5
P
PrintablesFloran

Gridfinity CR2450

Gridfinity holder for CR2450 batteries.

Downloads
236
Likes
54
Rating
5
P
PrintablesAlwaysL

CR2032 Battery Holder (With Text Label)

This model is a remix of tony 's " CR2032 battery holder " I have modified tony's original model to have text on the front that states the battery name, making it a bit easier to quickly grab and identify if you have multiple sizes of…

Downloads
236
Likes
108
Rating
5
P
PrintablesNERDCORNER

CR2032 Battery Container for 22pcs

Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/

Downloads
231
Likes
29
Rating
0
P
PrintablesKimframes

CR2032 and LR44 coin battery case

Sturdy case for CR2032/CR2025/LIR2032/LR44/SR44 coin batteries with screw attached lid

Downloads
227
Likes
29
Rating
5
P
PrintablesBTallack

Gridfinity CR2 Battery Holder

1x1x3 size CR2 Battery holder for Gridfinity system

Downloads
221
Likes
17
Rating
5
P
Printablesandimoto

CR2 Battery Case - Remix

Added “cr2_dim” to scad file to generate a 2x2 battery case! Thanks to kpreid!! https://www.prusaprinters.org/de/social/8504-kpreid/prints

Downloads
219
Likes
22
Rating
0
P
PrintablesJames

CR2032 battery storage

Storage for 16 CR2032 batteries. Also usable for CR2025.

Downloads
217
Likes
30
Rating
4.86
P
PrintablesDeathlicious

Rugged Box - CR2032 Battery Holder/Storage

Remixed the Parametric Rugged Box to be smaller and have slots to hold up to 12 CR2032 batteries. Requires 6 M3x30mm screws to assemble. The design is intended to have some EVA foam installed on the top side for a snug fit and to deaden…

Downloads
217
Likes
29
Rating
5
P
PrintablesQwermMakes

MOE AAA & CR2032 Grip Insert

MOE AAA & CR2032 Grip Insert by Qwerm An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries. Print Orientation: Print everything on it's flat side (facing up for the base, facing down for the cap). Settings used:…

Downloads
217
Likes
29
Rating
4

CR2032 Battery Adapter

I hate this coin cells / button cells don't know what's the exact description is for this batteries in english. These cells have 3V so, it's the same as two AA in series (2times 1.5V) Just solder the wires of the AA-Battery Holder (Or…

Downloads
213
Likes
26
Rating
0
P
PrintablesNolan Garmon

AA, AAA, 9v, CR2032 Battery Organizer Tray

Large Battery Organizer Tray. Holds 40 AA, 40 AAA, 6 9v, and 9 CR2032 batteries.

Downloads
203
Likes
21
Rating
0
P
PrintablesArough

Skadis/wall CR2032 dispenser

This is supposed to be used on a Skadis IKEA wall together with T-nuts . You could also mount it directly to a wall or a cupboard. Print with support!

Downloads
196
Likes
40
Rating
5
P

REMIX of JABB - Just Another Battery Box (CR20XX battery holder)

A remix of JABB - Just Another Battery Box . This version has a thicker clasp to help prevent it from breaking too easily. Recommend printing with 3-4 perimeters to give the clasp even more strength.

Downloads
193
Likes
33
Rating
5
P
PrintablesGiamba

CR2032 battery holder for remote control

cr2032 battery holder for tiny remote control I make it 0.08 layer height

Downloads
192
Likes
35
Rating
5
P
Printablesgeorgmierau

Yet another CR2032 container

I actually never expected to own more than a few CR2032 batteries, but here we are. The model requires well tuned support interfaces for a clean print. The dimensions are ~32×32×42 mm or ~32×32×61 mm for the larger version. Update: 2-part…

Downloads
186
Likes
22
Rating
5
P
PrintablesMartin Reichert

CR2032/LR44 Box

remixed to fit my 5x2,6mm magnets

Downloads
186
Likes
33
Rating
5
P
PrintablesHannes

CR2032 Adapter to Wire

I was heavily inspired by this CR2430 Adapter to Wire Pigtail . However, I needed to replace a 2032 battery, so I quickly created this adapter. (I used an AA Makeshift Battery Holder as a battery case.)

Downloads
185
Likes
33
Rating
4.75
P
PrintablesKerbabb

IKEA Skadis CR2032 holder

Hi, This is a CR2032 battery holder for the IKEA Skadis. The battery’s can be taken out of the holder with one hand. The holder has 10 slots. The curvature on the front of the holder prevents the battery’s from falling out easily. The…

Downloads
183
Likes
27
Rating
5
P
Printablesrh224

Mazda Key Fob CR2025 to CR2032 Battery Cap

If you have a Mazda from the 2010's with one of these key fobs, you probably know they use CR2025 batteries instead of the way more common CR2032. This is a replacement for the internal battery cap that reduces the spacer by 0.7mm so you…

Downloads
179
Likes
18
Rating
5
P
PrintablesMichaelQ

Mount for Stromer Charger CR246

For the Stromer charger (CR246) there are already some 3D models, but these are all rather made for garages or for apartments. I.e. in an environment where manual work is done, e.g. in a bicycle repair shop, these may be quickly broken.…

Downloads
178
Likes
7
Rating
0
P
PrintablesPolecat Prints

Gridfinity CR2032 Battery Holder - Lipless

A Gridfinity holder for CR2032 batteries with no lip. Fits well with other lipless battery holders. Holes in the bottom for magnets.

Downloads
174
Likes
17
Rating
5
P
Printablesdjinyus

CR2430 Battery Box - Gridfinity

Gridfinity box to store CR2430 batteries. Gridfinity U-standards: 1 x 1 x 3 U (42 x 42 x 21 mm)

Downloads
174
Likes
17
Rating
5
P
PrintablesAerowinder

CR2032 Battery Holder v2

EDIT (2022-05-28): v2 - Increased size to the size of a D Cell battery, v1 was sized between a C and D. Because the container is larger, the cradle will now hold up to 12 CR2032 batteries. Also improved threading on cap and container. I…

Downloads
169
Likes
22
Rating
5
P
PrintablesvmLOGIC

Stackable beer crate for CR2032 and ER14250 batteries

Since I always have a small supply of CR2032 batteries, moreover ER14250 batteries (for "Eve Door & Window"), I was missing a crate variant from CAD-Guy . This mix of these two battery types can hold 14 x CR2032 batteries (or smaller…

Downloads
168
Likes
35
Rating
5