59 models
Show your nerdiness with these awesome earrings. I printed all these earrings with ironing enabled on all top surfaces. And I also made sure that the black filament was dried enough to decrease stringing. This model is a work in progress…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
This print is designed to be printed in two parts, one part either painted or printed in black filament, and then superglued together. I did this so I could print this on my single-filament printer, since I don't own multiple filament…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Un recuerdo de mi infancia He diseñado este huevo precursor guiándome por el Easter Egg de Jak and Daxter encontrado en Uncharted . He usado fusion 360 para diseñarlo La inscripción es la original, lleva escrito en alfabeto precursor el…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Decorative obelisk found scattered around areas where Precursors had been working. Tree supports are recommended. The two-piece version uses less support material and can be glued together.
This panel has screw holes on all 4 sides so that it can be hung in 4 different orientations. There are several different tile designs that are used throughout the QEP, but this is one of the most interesting and most frequently used…
Tested as small as 50%. At smaller sizes the tabs can break off more easily. Flexible filaments will be able to go smaller than brittle ones. At 50% (as pictured,) a USB cable can easily be fed through.
Simple pixelated mouse cursor. Designed to be printed with 2 colors switching half ways. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 15% Cubic Filament: 3DE Premium PLA Black &…
This panel has screw holes on all 4 sides so that it can be hung in 4 different orientations.
A magnetic extruder indicator based on the old windows hourglass cursor. The current model was designed to fit on the Prusa i3 Mk2.5s; some scale adjustments might need to be made. The magnet can be adhered to the indicator using super…
This is a challenging print. For best results use organic supports, making sure that the Branch Angle is set to a high enough value that the overhangs get fully supported all the way around . A branch angle of 60 degrees seems to work…
Give your HyperX Pulsefire Saga a radical throwback mod with these custom cases inspired by the golden age of gaming. I have two editions for you: Mouse Entertainment System (MES) Click your way back to 1985 with classic red buttons,…
A replacement slider for DJ turntables like numark and pioneer
2/2/25___________________________________________________________ (v2) Sry for any inconveniences with MMU I just fixed it _____________________________________________________________________ Pretty simple you can scale to ur liking…
Printed at .2 layer height To do a filament change mid print you can stop at layer 14 Blend file also included if you want to change the model
The Precursor Orb from Jak and Daxter! I modeled this one based off the original model from the main 3 games, there is a popular Precursor Orb model but that one is based off the redesigned look in the Uncharted games and the 30th…
1 Version as a polished exterior - 1pc 1 Version with separated Top and Bottom, hollow interior to be a container- 2pcs
This is a door handle designed for a 3D printer enclosure. It is designed to attach to the opposite side of the bracket for this magnetic door catch (JQK Magnetic Cabinet Door Catch, Stainless Steel Closet Catches with Strong Magnetic,…
Thanks for downloading my Magnet. Layer Thikness: 0.2mm infill: 15% Pause the Print on Layer 13. When the Printer Paused the print you can insert the Magnets The holes are made for magnets, which have a diameter of 4 mm and a thickness of…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a 3D model of the pointer cursor that you've probably seen before. If you haven't, hover over this . I made the body and outline separate so that it would be double-sided. I glued each piece of the outline onto the body for the…
I printed this front-side down with support at 0.06mm layer height on my Bambu P1S in PLA. I expect a larger layer height of 0.1mm will be fine too.
Basic cursor replacement for A.W. FABER CASTELL (D.R. PATENT 206428) 392 slide rule. Printed with ASA and 0.25mm Nozzle
One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very difficult. This aims to resolve this issue by providing a sloped cursor that makes contact with…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
The Windows cursor can be in your home!
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
I edited the blade for a friend, and to work on 3D modeling skills.
UPDATE: This is a new version of the model, with a slimmer base for even better visibility. One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very…
Crumbling Cursor Causing Concern? Correct it Conclusively with this Clever Creation! Replace your crumbling K&E slide rule cursor bars with this! Quick print with integrated spring. This will also fit N4080-3 rules and probably others as…
Diatone Normal Plus Copter Spareframe: Five different Spareframes for Diatone Normal Plus Copter (2Inch and 3Inch Props/12mm + 9mm Holepattern). 2inch frame: 16x16 or 20x20 Stack. 3inch frame: 20x20 Stack. Bigger Frames for 3Inch Props…
Dale un toque geek y nostálgico a tu escritorio con este posavasos inspirado en el clásico cursor pixelado de los primeros sistemas operativos. Su diseño escalonado recrea fielmente el estilo retro digital, convirtiéndolo en el accesorio…
A presentation pointer shaped like a computer mouse cursor mid-click, with a long, lightweight handle for comfortable use. Designed for highlighting details on whiteboards and posters during lessons, meetings and demonstrations, it also…
Popis /////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build…
Sliding Cursor repair part for caliper case/enclosure - Cursore chiusura per scatola calibro Easy to print, optimized filament usage All our designs are free to download and use. Your support fuels our creativity. If you downloaded and…
A model from MakerWorld by TinyOrbit3D
un modelo simple q hice en 10 minutos, lo busque y no estaba asi q lo hice yo 😁
A pixel-style cursor magnet that keeps notes and papers on a magnetic surface. Print the model, then glue a magnet into the 10 mm wide recess on the back. Check the fit before gluing and let the adhesive cure before use. The supplied…
The 3D cursor in Blender is the red/white/black thing where new objects appear. You'll need to print 16 sections of the circle, 8 in white and 8 in red. You'll then need to superglue them together. Because there can be slight…
A small fan-made Cursor-inspired cube keychain designed for 3D printing. The model has a simple rounded keychain base with a raised geometric cube mark and cursor/paper-plane shape on top. The logo details are modeled as physical relief,…
bookmark best printed best with pla my advice is in white and/or black
One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very difficult. This aims to resolve this issue by providing a sloped cursor that makes contact with…
UPDATE: This is a new version of the model, with a slimmer base for even better visibility. One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very…
Dale un toque geek y nostálgico a tu escritorio con este posavasos inspirado en el clásico cursor pixelado de los primeros sistemas operativos. Su diseño escalonado recrea fielmente el estilo retro digital, convirtiéndolo en el accesorio…
The 3D cursor in Blender is the red/white/black thing where new objects appear. You'll need to print 16 sections of the circle, 8 in white and 8 in red. You'll then need to superglue them together. Because there can be slight…
The Precursor Orb from Jak and Daxter! I modeled this one based off the original model from the main 3 games, there is a popular Precursor Orb model but that one is based off the redesigned look in the Uncharted games and the 30th…
Update: Added a new top and bottom with 2 more magnet holes each for a stronger container hold. The Precursor Orb from Jak and Daxter! I modeled this one based off the original model from the main 3 games, there is a popular Precursor Orb…
This panel has screw holes on all 4 sides so that it can be hung in 4 different orientations.
Dale un toque geek y nostálgico a tu escritorio con este posavasos inspirado en el clásico cursor pixelado de los primeros sistemas operativos. Su diseño escalonado recrea fielmente el estilo retro digital, convirtiéndolo en el accesorio…
Update: Added a new top and bottom with 2 more magnet holes each for a stronger container hold. The Precursor Orb from Jak and Daxter! I modeled this one based off the original model from the main 3 games, there is a popular Precursor Orb…
