33 models
Adapter um ein Homematic IP Gerät an ein Danfoss RAVL Ventil anzuschliessen. Das sollte auch mit anderen Ventiltrieben, die auf ein M30 x 1.5 Gewinde aufsetzen, funktionieren. Getestet habe ich es aber nur mit verschiedenen HmIP Geräten.…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Update 07.12.2022: Es gibt eine veränderte Version, die leichter zum An- und Abbauen ist: https://www.printables.com/model/334310-eq-3-homematic-ip-danfoss-ravl-adapter-v2-m30-x-15 Alte Version: Adapter um ein Homematic IP Gerät an ein…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…
EN: Original part was a little to short for my application on old cast iron radiator valve, so I've made my own "remix" of it. It's based on AlloT's adapter but made from scratch using Fusion 360. It has thicker, stronger walls so it can…
Redukce Danfoss RTD M30 x 1,5 mm Category: Household Supplies
Wer noch die alten Danfoss Adapter hat kennt wohl das Problem. Die beigelegten Adapter von den Hersteller sind einfach schlecht und können sich ganz leicht lösen. Habe dann teure Metall Adapter gekauft die man mit 4 Madenschrauben fixiert…
Adapter for old Danfoss valves. Allows for the installation of classic thermostats and smart thermostats with M2
Quick remix to install it onto a 34 mm / 32.5 mm valve. Includes the adapter extension pin.
Description The original Danfoss RA-N Adapter which come in the box which each Smart Netatmo Radiator Thermostat is complete crap. It does not fit properly, does not keep the thermostat in place reliably and the thread keeps failing. This…
Danfoss Adapter Print: Material: PETG or PLA Layer: 0,2 mm Brim: 5mm Finnishing: Cut the Ring open at on of the Notches with a Saw. Afterwards you can Fit it onto the Valve. At last Screw on the Homematic Thermostat
An adapter ring made to accomondate the 32mm FJVR mounts using the Ally adapter for 34mm RAV. This ring is used along with one part of the original adapters which are included in the thermostat packaging and are installed by hand so no…
Hierbei handelt es sich um einen Thermostatadapter für das Danfoss-Ventil Typ RAVL 3/8“. Er ermöglicht das Anbringen eines Thermostats mit Innengewindeschraube 30 x 1,5 mm, beispielsweise eines Oventrop-Thermostats. Am besten druckt man…
To mount a FritzDECT301 thermostat onto a Danfoss RAVL valve, use this adapter https://www.printables.com/model/334310-eq-3-homematic-ip-danfoss-ravl-adapter-v2-m30-x-15/comments by Hoopy but replace the file “Stift” with this model.
Copyright (C) 2019 Peter Senna Tschudin SPDX-License-Identifier: GPL-2.0-only This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A…
Adapter spacer for Danfoss Link thermostats in order to use them with RAVL. Spacer: Print with ABS with brim. Adapter: Print with ABS and supports Used 0.15 quality settings
Print instructions Print with 0,1 mm layer height for sufficient thread quality. Fillament PETG or ASA. 4 outer perimeters. Supports needed. Use cylinder support enforcer with diameter 27 mm. The support must not touch the internal thread…
It's the adaptor from pemlik, I just needed to add a 1.5mm rim to be able to make the Silvercrest TRV not loose on it. If you want to modify it, you need the original model to import in the OpenSCAD.
Key for a School bell system timer, all but one of ours had been lost so created a backup. Designed to print without support. Instructions Printed at 0.2mm on a PrintrBot Simple Metal. Category: Parts
I've designed a custom 3D printed pin that will mechanically adjust the thermostatic valve's setpoint to prevent it from opening during ventilation in an unheated bedroom.
I have found the Adapter ring to mount Wirsbo and Danfoss Telestats on Wavin/Uponor Vario B valve insert f.run (EAN 7318793538406) too expensive for my installation. So I made this, I could print it myself. I printed this using PETG with…
If you have an older Danfoss thermostat with broken tabs, this model may help repairing the thermostat so you can use it again. If any of the tabs remain, you will have to cut them off and grind/polish the surface the tabs was on. On the…
This is to adapt Danfoss or generic ABN thermostatic actuators to 24mm RA valve threads.
Wanted to mount a Danfoss CC controller in a closet. Holes for side mount. Ekstra holes in the other side for inserting the screwdriver to make mounting easy. Hole for wire. Print instructions Category: Organization Summary Wanted to…
Adapter ring for Davolo Danfoss thermostat - my friend has bought thermostat but adapter ring was missing - couldn't find a replacement so I designed it. On the picture, from the left - original adapter ring, thermostat with adapter ring…
Electronics box lid for Danfoss refrigeration compressor, replaces the old one that sometimes breaks after 20 years in a hot/humid machine room.
This bracket is meant to mount a Danfoss Ally room sensor to an Ikea Billy shelf. I found the necessity to glue it to some surface using the 3M sticky tape a bit annoying since it could potentially destroy the surface. Just putting it on…
RAV adapter for Danfoss ECO thermostat RAV Ø34 thermostat 7mm bolt hole Little pin is for the unit so it can regulate temerpature at the valve. Print in material that can withstand high temperatures 15% infill I did custom supports only…
SUPPORT DANFOSS ROOM SENSOR aggiornato Category: 3D Printer Parts
Printet in PETG with supports. (On my Prusa XL I use PLA for support material)
This holds the roun Danfoss Ally (014G2480) sensor so that you do not need to rely on its cumbersome adhesive back panel
WHAT IT IS A tiny press-fit cap that slides onto the control pin of an old Danfoss RTD-N radiator valve and makes it 2.5 mm longer. Nothing more, but it is the missing piece if you want to put a modern M30x1.5 smart head (Sonoff TRVZB in…
Print with 3 walls. Rotate print 180 degrees to get the "flap" printed correctly. This will click-in-place between the base and the front panel of the Danfoss Link Controller. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
If you have an older Danfoss thermostat with broken tabs, this model may help repairing the thermostat so you can use it again. If any of the tabs remain, you will have to cut them off and grind/polish the surface the tabs was on. On the…
