Search results: dcl

Sort order

156 models

P
PrintablesAWSW

WordClock 16x16 LED matrix

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Downloads
1,918
Likes
777
Rating
4.94
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V2)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
1,055
Likes
286
Rating
4.82
P
PrintablesFabian Haensch

Wortuhr Wordclock lasercut

This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…

Downloads
720
Likes
42
Rating
0
P
PrintablesAWSW

WordClock 16x8 - 2024

WordClock 16x8 - 2024 BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To…

Downloads
689
Likes
107
Rating
4.95
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V1)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
294
Likes
64
Rating
5
P
PrintablesAWSW

WordClock 2024/2025 desk holder/stand (16x8 & 16x16)

Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…

Downloads
178
Likes
15
Rating
5
P
Printablesbigrjsuto

Charging Induction Cover/Stand for Sonicare DiamondClean Toothbrush Charger

My dog destroyed the inductive charging cover for my charger for my Philips Sonicare toothbrush. Made a replacement

Downloads
138
Likes
14
Rating
3.33
P
PrintablesSebastian

Modified WordClock Case and Stand

This is a remix of the german " Wordclock Wortuhr " case comprising the following changes: I added a printed diffusor layer finishing the front cover. I removed the hanger assembly on the back and the cable inlet on the side as I prefer…

Downloads
94
Likes
20
Rating
5
P
PrintablesEvil68

Dremel 723 Speedclic box inserts

I got a Dremel 723 box with lots of attachments. I saw the indjection muldet inserts that were wasting realy much space. After about 3 hours of designing and 4 hours of printing i had my inserts and was able to free up 2 of the 8…

Downloads
60
Likes
22
Rating
0
P
PrintablesJens

WordClock 16x8 LED matrix (2023-V3) - Closed Front

This contains only the German version of the Word Clock but with a closed front, but it's adaptable for other languages if you take a look how I stacked the different colours. I used a darker bronze gold (from Redline Filament) for the…

Downloads
44
Likes
4
Rating
0
P
PrintablesAWSW

WordClock 16x16 - 2024

WordClock 16x16 - 2024 This is the 2024 variant to the WordClock 16x16 model adding new functions and features as well as a new font as V2 variant. =) This WordClock 2024 variant covers mostly every input I got from users in the last 2…

Downloads
2,056
Likes
290
Rating
4.81
P
PrintablesCoat

Bambulab X1 bedclamps for big prints.

When your model is closing to the corners of the bed, the magnetic force is too weak to hold the magnetic sheet down against the warping. If the model has good adhesion, the sheet just curls up. In my case, I printed the model (in PETG)…

Downloads
1,279
Likes
196
Rating
4.73
P
PrintablesAWSW

WordClock (2022)

WordClock using LED stripes with English and German layout with lots of functions and web interface. UPDATE 19.04.2025: There is a new modern variant available now, which has many more improvements and does not need any soldering to build…

Downloads
882
Likes
284
Rating
4.9
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V3)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
876
Likes
214
Rating
4.96
P
Printableskfricke

DIN-Rail SlottedClamp

Variations of a clamp with different widths that can be pushed onto a DIN rail. The clamp has slots to attach various things to it. This should be printed twice to attach an power suppply to a DIN rail.

Downloads
597
Likes
48
Rating
5
P
PrintablesAWSW

WordClock 16x16 - 2025

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Downloads
505
Likes
53
Rating
5
P
PrintablesMartin_au

Wall mount for Makita DCL286/CL003

Wall mount for Makita DCL286/CL003. STL file is already set for best orientation. Use a tiny bit of support for the first few layers. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.

Downloads
461
Likes
15
Rating
5
P
PrintablesWalli

MKS DCL32 case and 3.5 LCD screen v-slot

Dual color print with single extruder, no need for MMU. In addition to the print, you will need : MKS DCL32, 3,5 screen and fan 16 M3 x 4mm threaded insert nuts 4 M3 x 12mm for fan 4 M3 x 4mm for board 4 M3 x 20mm for cover 4 M3 x 8mm for…

Downloads
444
Likes
34
Rating
4
P
PrintablesClaptomancy

Skyrim Goldclaw

Bless yourself Dragonborn!

Downloads
386
Likes
127
Rating
5
P
PrintablesJamie Claye

VINCA DCLA-0805 Caliper Battery Cover

So I have a VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper and for the longest time I dealt with the battery cover sliding off - it just wouldn't stay on. One day, I noticed it missing - so I whipped up this little replacement…

Downloads
378
Likes
31
Rating
4.5
P
PrintablesJustin Savala

Gridfinity Caliper Holder - VINCA DCLA-0605 Calipers

The only lay flat caliper holder models that I could find didn't fit my calipers. I have 2 sets of these calipers that I bought off of Amazon and wanted the set in my workshop to be easier to get to. Example was printed in PLA on a…

Downloads
360
Likes
23
Rating
5
P
Printableswjsteele

3DChameleon Mk3 Mounts for the Sovol SV-06 (and Plus) including 3DClippy filament cutter.

This is the full set of printed parts and PrusaSlicer profile to mount the 3DChameleon Mk3 onto the Sovol SV-06 printer and the SV-06 Plus. This set includes the 3DClippy filament cutter used to cut off the tip of the filament so it can…

Downloads
314
Likes
97
Rating
5
P
PrintablesGecko Boi

Filament Cutter for Biqu H2 on Ender 3 (3DClippy)

I remade this 3DClippy from scratch to work on my Ender 3V2 with a Biqu H2 extruder. I'm using a 3DChameleon MK3 to change colors so a filament cutter helped avoid needing tip shaping when changing colors. The included PDF explains how to…

Downloads
314
Likes
30
Rating
0
P
Printableskheboehr

Küchensockel Halterungen Gleitschiene und Rundclip

Küchensockel Halterungen Gleitschiene und Rundclip - die Originale sind nach ein paar Jahren gebrochen gewesen, brauchten neue

Downloads
255
Likes
16
Rating
0
P
PrintablesAlexander

wordclock ws2812b

Wordclock Matrix 11x11 Frame for WS2812B LEDs. LEDs can be simply clipped into the frame. For the Wordclock Frame i use a IKEA Ribba 23x23cm Frame https://www.ikea.com/at/de/p/ribba-rahmen-schwarz-40378401/ Source Code for this project…

Downloads
247
Likes
23
Rating
0
P
PrintablesKrope

Philips Sonicare DiamondClean 9000 Wall Mount for charging station

Wall Mount for the Sonicare DiamondClean 9000 charging station. It's Designed for the Plastic ring, but it also works with the Glass. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle. Using Extrudr Greentec Pro Black PLA.…

Downloads
227
Likes
32
Rating
5
P
PrintablesTechnoid

Charger Adapter for Philips Sonicare DiamondClean Toothbrush

The Sonicare diamondclean toothbrush comes with a “charging glass”, which lets your toothbrush flop around, touching all the nasty germs on the wall, not to mention the germs on other peoples' toothbrushes (yuck!). But that's not a…

Downloads
225
Likes
24
Rating
4.8
P
Printableswjsteele

3DClippy Generic Filament Cutter

This is a generic 3DClippy that can be adapted to any i3 style printer. It utilizes a mechanical arm to move a 9mm x 18mm utility knife blade to cut filament off. The arm is activated by a simple motion to either side of the gantry… one…

Downloads
205
Likes
27
Rating
0
P
PrintablesCADclass.org

5 Letter Cryptex Puzzle Box | CADclass

3D Printed Cryptex fitted together with 2 M3x50 bolts into 2x M3 HSTI set into the Closed End Cap.

Downloads
199
Likes
12
Rating
0
P
Printablesjobeagle

Wandhalter (Wall Mount) für MAKITA DCL281

Ein einfacher Snap-In Halter für den MAKITA Staubsauger DCL281. Er funktioniert mit oder ohne Akku. Benötigte Schrauben: max. 5 mm, Länge nach Bedarf Material: PLA Auflösung: 0.2 mm kein Support Infill: Cubic, 50% 4 Walls, 4 Oberflächen…

Downloads
187
Likes
10
Rating
0
P
Printablesbutchooka

Wordclock Wortuhr german + english, RGB 16x16 Matrix, ESP32 D1 Mini, Multicolour AMS ready (remix)

Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate. I only remixed DE+EN Fronts so far, other languages would take…

Downloads
184
Likes
17
Rating
0
P

Wortuhr - Wordclock - 16x16 - 2024 - German Version Only!

This is a remix of the German Version of the famous and great "Wordclock 16x16 2024" by AWSW (https://www.printables.com/model/768062-wordclock-16x16-2024). So if you need information about the hard- and software needed, please look…

Downloads
184
Likes
9
Rating
5
P
PrintablesWulffN

Vinca Caliper DCLA-0605 Battery Cover (Updated)

This is a battery cover for the Vinca DCLA-0605 caliper. The Vinca DCLA-0805 (notice the different model number) battery cover fits for this model, but comes off almost as easily as the original piece. I've resized it to fit tighter on…

Downloads
178
Likes
10
Rating
5
P
PrintablesVAROE

Wortuhr | Wordclock with big Letters | Bambu Lab

I love the idea of a wordclock but i don't liked the price of the original nor the very small letters of other models in the web. So i made my own - clean looking wordclock with big letters. How to print? → Print the front cover upside…

Downloads
177
Likes
20
Rating
0
P
Printablesakku3D

Wordclock Remix für Multicolor Druck

Zu der tollen Uhr von AWSW hatte ich ein paar Änderungswünsche, die ich mit diesem remix umgesetzt habe. Die Buchstaben sind nun bündig, um sie auch gut lesen zu können, wenn man nicht direkt frontal auf die Uhr schaut. Die Front und der…

Downloads
176
Likes
37
Rating
5
P
PrintablesAdrian Beer

Thule Nummernschildclip Fahrradträger / Replacement Clips (2A +2B)

Habe die Clips für die Nummernschildbefestigung des Thule Fahrradträgers verloren. (Ersatzteilenummer 51378 von Thule Clip 2A + 2B passend) Vielen Dank an @vaterderhuehner für die Arbeit. Ich habe die Clips auf mein Modell angepasst.…

Downloads
175
Likes
10
Rating
0
P
Printablesackiid

Philips Sonicare Diamondclean toothbrush holder for two

Use good double-sided tape to secure “mount” to the wall, holder part slides into it. Print normally.

Downloads
174
Likes
19
Rating
0
P
PrintablesBriliantStudio

HandClip Rod Fishing

The HandClip Rod Fishing is created with an ergonomic and highly precise design, allowing users to hold the fishing rod more comfortably and stably. The materials typically used are PLA or ABS, two common filaments in 3D printing. These…

Downloads
174
Likes
54
Rating
0
P
PrintablesAWSW

WordClock 14x14 Classic - 2025

BIG news on 18.07.2026: Software version V2.0.0 available! WordClock 14x14 Classic received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of…

Downloads
166
Likes
40
Rating
5
P
PrintablesGuillaume G

Applique Murle DCL sans perçage

J'ai créé cette applique Murale pour se placer sur des connecteurs DCL sans avoir à faire de trou et qu'elle soit orientable. Impression en 2 parties : Imprimer d'abord la fixation pour voir si elle fonctionne avec votre prise DCL, j'ai…

Downloads
163
Likes
20
Rating
0
P
PrintablesSebastian

Wordclock 8x8 - Multilanguage (EN, DE, ES) - Completely 3D-printed

Always wanted to build a wordclock and saw these cheap WS2812B 8x8 LED-panels (you can find them by searching for WS2812B 8x8 on a shop of your choice), so I started to make a model. All files are sized for the ones with the 6 holes, you…

Downloads
142
Likes
30
Rating
4
P
PrintablesDerk

Makita DCL182 wall hanger

Wall hanger for the Makita DCL182 series vacuums. - 1.1 Version for the 5Ah battery with and without holes

Downloads
137
Likes
9
Rating
5
P
PrintablesMartin_au

Wall mount for Makita DCL286/CL003 - Version 2.

Version two - much better fit and a bit stronger. Print with the angled side downwards and a small layer height. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.

Downloads
133
Likes
10
Rating
5
P
PrintablesSitsero

Sangrath – The Bloodclaw Tiger

Elemental Guardian Beast Series Unleash the primal force of life and fury with Sangrath , the Primordial Beast of Blood — a fierce tiger infused with raw instinct and living energy. Sculpted with flowing, vein-like patterns across its…

Downloads
124
Likes
27
Rating
5
P
PrintablesMaik Sommer

Bambulab P1P bedclamps for big prints.

Thanks at Coat for the original Design, remixed it because the Bed of the P1P needs another short Clamps/Clips to hold the Bed in place for long prints. Printed this in PETG with standard Settings and works like a Charm for me. Like the…

Downloads
123
Likes
13
Rating
0
P
PrintablesIgor Darin

K1 Multi-Filament Upgrade ( 100% CFS-Compatible) replacement KIT CFS | cutter | 3dclippy

Este é um mod completo de reposição do CFS , incluindo cortador de filamento + sensor de corte, descarga de purga e cabo USB do CFS , totalmente compatível com a extrusora original da Creality . Desenvolvi esse projeto para permitir…

Downloads
120
Likes
47
Rating
5
P
PrintablesAvise

Philips Sonicare Prestige & DiamondClean Tootbrush Holder

A simple holder for Philips Sonicare toothbrushes. I included holders for two different models. Philips Sonicare Prestige (HX9992) and Philips Sonicare DiamondClean (HX9911). Other Philips toothbrushes might or might not fit. There are…

Downloads
114
Likes
11
Rating
5
P
PrintablesMaxter3D

Gridfinity Dremel SpeedClic Cutting Diks Dispenser with Spring

I had an original Dremel Speedclic Cutting Disk Dispender that did not Fit for Gridfinity. So I designed a Dispender where i can use the original Spring.

Downloads
114
Likes
16
Rating
5
P
PrintablesMichael Legge

K1 Max 3dclippy

3dclippy for K1 Max. Print in 25 percent gyroid infill, petg. Just a suggestion but from my limited testing this works best. No infill in the filament path, use a small drill bit and manually twist through to remove the burrs from lack of…

Downloads
107
Likes
28
Rating
0
P
PrintablesDaniel S

Makita Vacuum DCL286F Flat Nozzle

Flat Nozzle using the "Makita Quick Connect Fitting" for the DCL286F Ideal for cleaning floor mats in the car! Category: Household

Downloads
101
Likes
10
Rating
5

Makita 18V DCL 182 long tube for vacuum cleaner

just hate those short tubes for hard to reach places in the car please comment if you have tried this on the vacuum cleaner as I haven't printed it yet because of the print height, it would probably benefit from a slower feed setting,…

Downloads
100
Likes
8
Rating
5
P
PrintablesDaniel S

Makita Vacuum DCL286F Adapters Hose,Nozzle,DiY, Dyson Brush

WIP Nozzle designed to clean the crevices next to car seats you cant reach with the stock nozzle Hose Adapter for this Hose: https://www.amazon.de/dp/B079VDMNN3?ref=ppx_yo2ov_dt_b_product_details&th=1 Dyson Brush:…

Downloads
93
Likes
7
Rating
0
P
PrintablesYuriiS

Wordclock Multimaterial - 16x16 - 2024 - German Version

Printing Details The front plate, which displays the letters, is printed in place using two or three filaments: Black (or any other) filament Transparent filament White (optional) – This acts as a diffusion layer to ensure the light on…

Downloads
92
Likes
1
Rating
4
P
Printablesalprints

THE SPEEDCLICKER 2.0

This is an amazing way to click faster without having to use software that could get you banned, just put the 4 pieces together and add it to the mouse and get to clicking. New, sleeker, easier to use design! 4 clicks per rotation! The…

Downloads
82
Likes
47
Rating
0

Philips Sonicare DiamondClean double charging base

*** EN *** Double charging base for Philips Sonicare DiamondClean 9000 toothbrush. Three variants A - With rim (printing normally) B - Without rim (printing upside down C - With rim printed separately (printing upside down). Need to glue.…

Downloads
78
Likes
10
Rating
0
P
PrintablesAWSW

WordClock 16x8 - 2025

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
76
Likes
12
Rating
5
P
PrintablesLyra

Makita DCL286 Vacuum Wall Mount

Could work with other models too: DCL286 DCL180 DCL181 DCL182 DCL283 … It hangs the vacuum by the battery to the wall.

Downloads
74
Likes
4
Rating
0
P
Printablesrondawg1

Nerf DCL-120 sight

This is designed for any Nerf Blaster with a standard size nerf rail. It is supposed to somewhat resemble a DCL 120 (but much, much smaller) have fun! ;)

Downloads
71
Likes
25
Rating
0
P
PrintablesNygaard Design

STRAPVICE (BandClamp) (Parametric) (Fusion360)

Very useful for glueing together lasercut boxes etc. There is Parameters you can edit in the fusion file. Parameters include: Angle, belt width, belt thickness

Downloads
67
Likes
14
Rating
5
P
PrintablesRaidy

RepRackHanger for 25.5mm PVC with RodClamp embedded & STEP file

printed in PETG no support need if use default orientation step file included feel free to use it as you want

Downloads
66
Likes
10
Rating
5
P
PrintablesLayerLux3D

Dremel SpeedClic Disc Holder

Who needs such a huge container to store a couple of discs? I don't. Here is a small holder for your discs.

Downloads
66
Likes
20
Rating
5
P
PrintablesGuto

DUB185 and DUB186 to DCL180 adapter

DUB185 and DUB186 Blower to DCL180 Mobile Stick Vacuum pipe and nozzle accessories adapter. I made it to use the the extension pipe and Sash Nozzle on my DUB185 Blower.

Downloads
65
Likes
5
Rating
0
P
PrintablesCADclass.org

Prototype Drone CADclass.org - Chapter 3

4 STEP files needed for Chapter 3 Prototype Drone project in Mastering Autodesk Fusion 360 Edt. 2.

Downloads
65
Likes
2
Rating
0
P
Printablesn00by

Makita DCL 180 wall mount holder

Raft with 20% infill will be ok Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Doesn't Matter Resolution: 0.4 Infill: 20 Filament: prusament pla, petg whatever Notes: Petg would be better Category: Tool Holders…

Downloads
65
Likes
4
Rating
5
P
Printablesgerrrciu

Speedclip

I needed a clip for rolls of wrapping film, so I made one. They are cheap to buy, but what you make yourself is yours. Can also be used for many other things. The standard version is for diameter of 85-120 mm so it can be scaled for…

Downloads
60
Likes
5
Rating
0
P
PrintablesTobi

Modular Wall Mount Makita DCL286F Vacuum & Accessories (Expandable)

The System: The key feature of this modular design is its flexibility. Each holder connects using a sliding dovetail mechanism, allowing you to configure your setup exactly as needed. Fully Expandable: Print only the modules you actually…

Downloads
56
Likes
4
Rating
0
P
PrintablesOrigamiMarie

Battery compartment for VINCA Digital Caliper, DCLA-0805

Make a little slotted compartment that fits into your caliper case, to hold the spare batteries that you bought too many of. This includes the compartment itself, a lid that keeps the batteries in the compartment when the case is closed…

Downloads
55
Likes
14
Rating
0
P
PrintablesOtty_Skipper

Makita DCL286F Vacuumcleaner

An adapter for the Makita DCL286F vacuum cleaner, a vacuum cleaner hose Ø 35mm is required. You can still use the vacuum cleaner's original nozzle with the attachment. Additionally there is a holder for the ceiling to hang the hose.

Downloads
55
Likes
13
Rating
0
P
PrintablesCobalt

Philips Sonicare DiamondClean 9900 charging holder

Since I only connect the charging station for charging, the loose charging case annoyed me. With the holder, the cable is hidden under the charging case and attached to the included power supply. With the 3 mm shim, the power supply can…

Downloads
54
Likes
6
Rating
0
P
PrintablesJ Green

Vinca Caliper Model DCLA-0605 Battery Cover

A replacement for missing DCLA-0605 Caliper battery cover. all of the models I have seen just don't fit properly so my OCDness took over and I designed this one.

Downloads
53
Likes
5
Rating
5
P
Printablessobsmb

Eureka RapidClean Pro accessory tool holder wall mount

The Eureka RapidClean Pro doesn't come with a way to mount to accessories onto the wall like the vacuum itself. I created this to solve that issues and mount them slightly away from the vacuum. Its a bit beefier then it needs to be, but I…

Downloads
51
Likes
3
Rating
0
P
Printablesreibuehl

Inserts for Dremel EZ SpeedClic Box (SC725)

After getting a Dremel EZ SpeedClic Assortment Box (SC725), I was surprised to see how much space is wasted in that box. All parts are presented in plastic molds that push the content up and leave vast amounts of unused and inaccessible…

Downloads
49
Likes
12
Rating
0
P
PrintablesSnappy DIY

IKEA Ribba WordClock 23x23cm ESP8266 WS2812B

Optimized Translation: WordClock 23x23cm IKEA Ribba Project Required Materials: 23x23cm IKEA Ribba Frame If you test it with the HOVSTA frame, please provide feedback. ESP8266 NodeMCU 114x WS2812B RGB LEDs (60 LEDs/m, self-adhesive) 30AWG…

Downloads
48
Likes
8
Rating
0
P
PrintablesLUC4R4T0R

Makita DCL286/CL003/XLC11/GLC03Z cordless vacuum wall mount with dedicated extension-tube holder

You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…

Downloads
46
Likes
4
Rating
0
P
PrintablesToefter

Cherry DC2000 Keyboardclip/Keyboardstand

Replacement for the keyboardclip of a Cherry DC2000. No Brim. No Supports. Printed in PLA with 0.4 Nozzle @ 0.1 Layerheight. Low layerheight recommended for best fitting. Model in the picture was printed with brim, that's why it's a bit…

Downloads
45
Likes
10
Rating
5
P
PrintablesAWSW

Present box for WordClock & WordCalendar 2024/2025 models

Present box for WordClock & WordCalendar 2024/2025 models. This model was kindly provided to me by the user @Pierre . I think he is a big fan of my WordClock 2024 and WordCalendar 2024 models and asked me to share it with you too. =) The…

Downloads
44
Likes
10
Rating
0
P
Printablesfelixna

Alternative Stand for Modified WordClock Case

I built the Modified WordClock Case and Stand , but the stand that came with it was too unstable, so it kept falling over. Therefore I designed these little feet that are visible at the front, but provide stability.

Downloads
44
Likes
1
Rating
5
P
PrintablesTFro3

Disney Cruise Line (DCL) Christmas Tree Ornament Stand

Day 1 (within hours) of hanging this ornament on our tree the top 'hanger' that seemed to be glued on broke off. Luckily the tree's skirt broke its fall and saved the rest of the ornament. So I made this simple stand so the ship in the…

Downloads
44
Likes
19
Rating
0
P
PrintablesDwight's Craft

Castle Tower DCLLC

Castle tower inspired by television and movies. Be sure to check out my website for more 3D printed products, pro-tips, and more @ https://www.dwightscraft.com Favorite or like would be much appreciated. Of course, visiting my website…

Downloads
41
Likes
3
Rating
0
P
Printablesflummer

Accessory adapter for Makita DCL182 vacuum cleaner

This adapter makes it possible to use non Makita accessories with the handheld, battery powered DCL182 vacuum cleaner. The long end fits in the Makita, and due to it's conical shape, stays fairly well, though it is still possible to…

Downloads
40
Likes
3
Rating
0
P
PrintablesJoseph E

3DClippy for ender 3 extended

Gave the 3DClippy for Ender 3 a little more play on the cut.

Downloads
40
Likes
4
Rating
0
P
PrintablesPierre

Frame and Lid remix for AWSW WordClock 16x16 LED matrix (2023-V2)

WORK IN PROGRESS This is a first remix for the Frame and Lid for AWSW amazing WordClock 16x16 LED matrix (2023-V2). For now I : + Enlarge internal corner to have more space for the ESP32 + Shorten the external frame of the lid by 0.5 mm…

Downloads
39
Likes
5
Rating
4
P
PrintablesRL306Maxi

Makita Accessories Holder DCL182

Holder is simple, approx. 35 min to print. Tested with DCL182 car seat and car floor accessories (maybe works with DCL180 and some other models). I added hole for easier screw insert and screwdriver to screw it in. See attached photos.…

Downloads
38
Likes
2
Rating
0
P
PrintablesMr.Ramtech

WordClock 16x16 To Fit Ikea SANNAHED 35x35 Frame

https://www.ikea.com/gb/en/p/sannahed-frame-black-80459117/#content https://www.aliexpress.com/item/1005002048512739.html?spm=a2g0o.order_list.order_list_main.77.2a881802ZVR2Nl

Downloads
37
Likes
6
Rating
5
P
PrintablesFlo Thomas

Makita DCL 182 Vacuum Adapter to SEBO (36,5mm OD)

I used an internal brim to secure the adapter to my build plate and preserve the rounded external edge of the smaller side. Dimensions can be seen in the second picture.

Downloads
35
Likes
2
Rating
0
P
PrintablesNygaard Design

STRAPVICE V2 (BandClamp) (Parametric Fusion360)

STRAPVICE V2 (Band-Clamp) (Parametric Fusion360) This is the updated version of the STRAPVICE, a 3D printable band-clamp system designed for gluing laser-cut boxes and similar structures. The V2 utilizes a strap to securely tighten…

Downloads
34
Likes
18
Rating
0
P
Printablessuperoboe73

Literature Light - Romeo and Juliet Heart WordCloud Lithophane With Candle Holder

Using the WordCloud library in Python, I created a word cloud in the shape of a heart from the text of William Shakespeare's Romeo and Juliet as available from Project Gutenberg . For the text, I used the font Smooch from Google's…

Downloads
34
Likes
10
Rating
0
P
PrintablesMichaelQ

WordClock V1/2/3 Lid replacement for ESP32 with Pins

It is not a complete remix of the WordClock , just the lid on the back is remixed. Frame and other parts of the WordClock, just use the same as the one for the pegs. The remixed lid is mounted with screws. The solution with the pegs was…

Downloads
33
Likes
6
Rating
5
P
PrintablesAnatomicFlack
Downloads
32
Likes
4
Rating
0
P
PrintablesAWSW

Back plate for WordClock

Alternative back plate for the german fully 3D printble WordClock project: Wordclock Wortuhr The software for this project can be found here: WordClock NOTE: Compatible with the V1 version STL files. The newer ones can be found here:…

Downloads
32
Likes
3
Rating
0
P
Printablestijn vennink

Philips Sonicare DiamondClean 9000 Wall Mount for charging station, more wall stick surface

Modded version of the original mount made by another user. It has a little more surface area so my double sides tape had a little but more surface, seems to stick to the wall nicely. I included a .f3d file for editing the size in fusion.

Downloads
30
Likes
5
Rating
0
P

Bottleholder for Bedcleaner (Left/Right)

The bottle holder can be easily mounted to your table or enclosure with a 4mm Spax countersunk screw. You can differentiate between a left and a right version. Depending on the version you can download the appropriate files. Left marked…

Downloads
30
Likes
3
Rating
0
P
Printablesecspot

Saturn V 1/180th scale (CADclass)

1/180th of the original scale. The bottom cavity will fit a model rocket engine if you want to 3D print and launch one!

Downloads
30
Likes
4
Rating
0
P
PrintablesLyra

Makita DCL286 to osVAC F32 Adapter

Simple Makita DCL286 to osVAC Adapter

Downloads
29
Likes
1
Rating
0
P
PrintablesRem Lezar

DCL magnet with flat mickey

friend wanted this but flat so I cut off a little for them.

Downloads
29
Likes
7
Rating
0
P
PrintablesViperrr

Chinese layout remix for WordClock 16x16 LED matrix (2023-V2)

A Chinese layout remix using Lishu (隶书) font for the amazing WordClock 16x16 LED matrix (2023-V2) designed by AWSW. Follow the instructions and print everything from the original model, just replace the front file with this Chinese layout…

Downloads
29
Likes
12
Rating
0
P
PrintablesBASt

Ender 3 Polypropylene Bedclips

C-clips for an Ender 3 original Polypropylene plate. Bed including buildplate is 4.15mm in my setup. Clips raise 2mm above the bed. Print it with the c-shape on the bed for best strength. 100% infill, 0.2mm layer height Suggest to print…

Downloads
29
Likes
6
Rating
0
P
PrintablesRL306Maxi

Makita DCL182 flex hose Holder

Simple Makita DCL182 (maybe other variants also) flex hose holder. Modeled with 5mm over diameter so it can be fixed easily and still it will stay there no matter what. Suitable for width 3,5 or 4 mm screw. I prefer 3,5 mm due to low hose…

Downloads
28
Likes
4
Rating
0
P
PrintablesFantastovich

Philips DiamondClean Sonicare - HX939V - Travel Case

A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…

Downloads
26
Likes
3
Rating
0
P
PrintablesHeleplanchiste

Bror Magnetic LedClip

Magnetic LedClip for the Bror Ikea table. Magnet : Ø 4mm, 2.7mm height

Downloads
26
Likes
10
Rating
0