477 models
A simple holder for 3.2mm deburring blades. The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together. Update dec 25: Added new model files for…
Modification of Deburring Tool Case 154mm (Libraton) - Rugged Box Style to fit NB1100 deburring tool. In this remix you can find part to fit NB1100 deburring tool to fit to original box made by user @Shadow_1242354 . You just need to…
a holder for the Honeycomb storage wall + 7 blades my Deburring Tool
This is a modified version of Lndnny's Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style . A fantastic case for the hexagon handle. This lower insert is modified to accommodate the Round Aluminum Knurled handle version. I haven't…
This is a remix of the case by morleykert. I resized it to fit my tool that was 12 mm longer than the original
Really liked the original upload by @scooter_magavin but my deburring tool had a hex body. This remix supports that.
simple print in petg/pla. Base is flush so as not to require supports
Because i bought a set of some different blades but just one handle, i made my own handles. Print Chip The 2 halfs are mirrored. Print both without support. Additional Parts A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)…
There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…
I kept with printing this in pla and it works! material: PLA perimeters: 4 (strengthens it) infill:5% (keeps it light) support material: on build plate
The Noga Deburring Tool is one of the most popular pieces of my tool kit. For me, it is an indispensable tool in the post-processing of 3D prints. Print instructions: You can print the case from both PLA and PETG. Does not require…
Original model is good but I tend to knock things over on the table. Just made a couple changes and made it for pegboard mounting
This is a modification of the Insert - Bottom (No Holders) , made to fit CNCKitchen deburrer . This is just a customized insert to the following model Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style by @Lndnny. Print settings…
Fits this deburring tool kit: https://a.co/d/cgOKK9N Printed with PETG, 2 perimeters, support material on build plate, 15% infill. Includes modified Fusion 360 file from Shawn Stutzman that fits Vastools Swivel Head Deburring Tool 6 1/2"…
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Please note, the hinges are elements from the original design & are not my work, yeah they’re a bit tight & no they’re not that great, but they do work. If I…
This is a remix from Onelostcause ; original model found here . The original model is great for holding any standard/generic straight handled deburring tool. I wanted to incorporate blade storage while still retaining the ability to stack…
Building on top of the great Gridfinity block template by Filip Kolínský , I designed a tray for the AFA deburring tool inspired by similar trays from Onelostcause and Yoni . Uploading the Fusion 360 model file in case you want to make…
Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…
Hold your AFA deburring tool on your honeycomb storage wall…and do it in style! The space for spare cutters gives it a very Game of Thrones feel to it. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part…
Deburring Tool Case for the aliexpress deburring tool. fits 10 blades and the tool. print in place model using 14 magnets (6X2) for securing the blades and closing the tool box. stop the print at height 2.8mm (10 magnets), 17mm (4…
Printing Both parts are printable without supports. Assembly list of non-printed parts deburring steel blades
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. I have…
A simple tool holder for hexagonal deburring knifes with 9 additional blades. This has been modified from the based on the version designed by Jem_3Dprints , with the following modifications: The main tool holder has been adapted for the…
My Tool was only some mm longer. Thanks to the supported f2d files i've modified them so you can set some parameters: (len) Length of the box (ToolEndRadius) The radius of the tool end (HolderDiameter) Diameter of the tool holder…
Deburring tool holder with storage for 10 extra blades.
Just a quick remix to fit my libraton. * Lengthen the handle hole * Made the tool holder a little bit thicker
I wanted to made print in magnets so you dont have to click the tools in. I used Magnets ⌀5x1mm. I used this Magnets from amazon. I made a second version on request for ⌀6x3mm magnets. The design is made for this deburring tool What you…
Use with Ikea Skadis system and T-Clips to mount (see remix section). Be sure to print a T-Clip to go along with this model. After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate…
A Deburring tool holder for use on an Ikea Skadis board. Can hold any deburring tool with a diameter of 20mm or less, such as the AFA Tooling Deburring tool. printing with supports is required, and printing with a brim is recommended.…
A deburring tool tray that holds the tool and 15 extra tips. This is a remix of darious' Gridfinity Deburring Tool Holder , modified to hold 15 extra tips.
This is tray to hold my deburring tool in my draw using Gridfinity. I bought this from Amazon, it might work for other models. This was created in onshape from a set of templates I found. This video was very helpful in figuring it all…
Simple 1x1 Gridfinity holder for a deburring tool off of amazon The tool hole is 20mm in diameter The scraper holes are 3.45mm in diameter and fit the scraper heads snugly. Also included is the Fusion360 .f3d file.
Update: Created a version 2 based on feedback. I've left the V1 version in the files if anyone is interested and the instructions still apply for that one, it is only slightly different for V2. Changes for V2: 1.) Made logo larger to aid…
Description Insert for tool made longer (154mm) to fit Libraton tool. This is my first remix so plese let me know if I've done something wrong via coments Assembly You will need six 20 mm long M3 screws to assemble it. The magnet used for…
This is a remix of a remix of the excellent deburring tool case originally created by morleykert . This case fits a 150mm length tool from tip of blade to end of handle. Handle width is 15mm across (widest) edge of the hex handle. It fits…
Fits perfekt. with and with out holes for Blades. link to Deburring Tool: https://www.aliexpress.com/item/4000688416090.html?spm=a2g0o.order_list.order_list_main.200.6ec71802dx3HqU
A custom bin I made for a hexagonal deburring tool you can purchase from AliExpress. Has storage for 9 blades. Holds 10 blades including one on the tool. Press to remove. Please ensure your handle is 105mm in length otherwise your tool…
I modified the case to fit the following tool : https://www.amazon.com/gp/product/B01L2XR4P2/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1 I also increased the size of the magnet hole very slightly (.015mm) for a better fit with my…
I wont a support for my Deburring-Tool and can't find a suitable Solution for the Honeycomb Wall, where I can place the Replacement-Blades. Feel free to remix it. STEP-File provided. My Print-Settings: 0.2mm PLA “Bavaria Filament” Silver…
Hold you De-burring tool with ease! Slot in the Middle allows for easy-grab access with your thumb! Notes: This model only support the hex shaped deburring tools that have a face to face width of 12 mm Holds 10 spare blades. Has a snug…
A small holder for your skadis wall to hold your deburring tool. It fits the classic ones with the big blue handle (22mm circumference). has to be printed with supports under the skadis brackets.
deburring support - Honeycomb storage wall - STEP files
This part is exactly 25mm wide. This means you can place several holders next to each other without losing space. You don't need any additional parts to attach this part to a multiboard wall. It is designed with a “Tight Snap” connector.…
A gridfinity holder for a generic hexagonal demurring tool that's 4x1x3 units and stackable. There seem to be a lot of these tools in this shape, so I think it's a clone of some specific brand but I don't know which. Fits a tool about…
Holder for Silverline 248844 Expert Deburring Tool 145 mm, there's another holder in the remixes but not fit for the Silverline so I made one from scratch. Easy print: PLA // 215C // 60C // 4 Perimeters // 0% infil // 0.2 layer height
Small Ergonomic Handle for Deburring Tool - Deburrer Tool - Mini sbavatore NEW VERSION This new version is much sturdier than our old one Optimized profile for better resistance and ease of printing Optimized filament usage Recommended…
Deburring Tool Case I designed this tool case for a deburring tool and its replacement heads that came in a cardboard box. This tool case has a print in place hinge. Magnets hold the case shut while providing a satisfying snap as it is…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
I look for efficient designs and, while here are many deburring tool holders already available, none met my criteria. I wanted blade storage, but towards the wall so I'd be less likely to accidently grab a blade while retrieving the tool.…
Hello All, This is an insert for my rugged box deburring tool case here: https://www.printables.com/model/551996-deburring-tool-case-150mm-afa-tooling-rugged-box-s I noticed there were a few folks who were cutting or modifying the insert…
Remix from Onelostcause , Original design here: https://www.printables.com/model/173082-gridfinity-deburring-tool-holder I hacked up the original files provided by Onelostcause , if you too want to hack on them, you can find the Fusion…
🇬🇧 Gridfinitiy holder for the Meistergriff deburring tool set 🇩🇪 Gridfinitiy Halter für das Meistergriff Entgrater Set https://amazon.de/gp/product/B093PQXJCS/
Aufbewahrung Box für ein Entgratungs Tool. (MEISTERGRIFF) 2xM3x30mm 2xM3x40mm Magnet 10x3mm / 10x2mm
Handle to deburring tool, free spinning of tool after pushing it all the way down.
Deburring tool holder for honeycomb storage wall. Holds tool and 10 blades. Fits 19mm tool handle and 3mm blades at 100% scale.
A remix of atucom's deburring tool to fit the cheap AliExpress deburring tool, which is 22mm. I had to sacrifice 2 blades to make it fit. Also, I made the holes bigger, because they didn't work properly when printing with a 0.8mm nozzle…
Simple Deburring Tool Holder for Multiboard, prints without support Inner Diameter is 14mm Multiboard https://www.multiboard.io
Gridfninty holder for a generic silicone handle deburring tool commonly found on Amazon.
Gridfinity block for the AFA Tooling Deburring Tool with 10 rotary blades and countersink hand-reamer . Printed in PETG, .4mm draft with a .6mm nozzle on a Prusa i3 MK3S+ 2/11/23 Update: Added…
deburing tool holder.stl secured to the pegboard with 2 x Tclips Fits a standard plastic deburring tool like the one pictured Tried to make it use space efficiently, but this design requires the are above the top of the tool to be clear…
There are some similar models to this, but I couldn't find one that could fit the holder and also the blades in horizontal position without wasting too much space (this one only requires a single additional square). The blades could be…
Created a variation of the AFA Deburring tool holder to work with Multiboard and utilize the snap connector. There are some push-fit options out but I like the direct application and single print of the snap connector option for things I…
A 1×1 Gridfinity tool holder for an AFA Tooling Deburring Tool , 10 spare tips, an X-Acto #2 Knife , and an X-Acto Blade Dispenser . I realize that these are the wrong size blades for the handle but they still work. This design is…
Here is a storage box for the Libraton deburring tool found on Aliexpress . It is a remix of the well know Parametric Rugged Box and I took some inspiration from Mad3D's Libraton Remix , however I did find it was too small for my one and…
Multiboard holder for generic deburring tool and addition bit holders
This is a storage tray for the Kobalt deburring tool from Lowes but others may fit. It a 5x1x3 tray for the Gridfinity system by Zac Freedman . I printed it in PLA with the default Prusaslicer 0.20mm Quality settings. There was a color…
I wanted to hang my deburring tool, but the existing models I found did not secure the tool which led to some crashes and dents in the floor. This model adds a little lip to prevent slipping from vibrations. For deburring tools with a…
165mm / 6.5" Deburring Tool Case with Rugged Box Fits VASTOOLS 6.5" deburring tool (from Amazon) Prints without support. + Added one piece versions of top and bottom of box if you don't want to bother with inserts. Requires: 6x M3x30 2x…
Please check out the original model for the particular deburring tool this was designed for.
Made a bit of changes to fit other deburring tools as well. UPDATE: Added two separate files for Top & Bottom for easier printing :)
🟩 First and foremost: I’ve worked hard on this, so I’d love to see your creations, folks! 🙏😜 Have you ever lost your deburring tool right when you needed to clean up a print, only to realize a replacement from overseas will take weeks to…
Greeting, This will allow you to store up to 2 deburring tools (14mm diameter) and 2 packs of replacement blades on an Ikea Skadi pegboard. Note: I've added a new version that holds 3 packs of replacement blades Shameless Money Grab: If…
Small magnetic handle for deburring knife. Max. magnet diameter 15mm
Small Ergonomic Handle for Deburring Tool - Deburrer Tool - Mini sbavatore Optimized profile for better resistance and ease of printing Optimized filament usage Recommended filaments: PETG - ASA - ABS - PLA+ - Engineering Filaments Tool…
I modified the case for the following tool: https://www.amazon.de/MEISTERGRIFF-Entgrater-inkl-11-Klingen/dp/B093PQXJCS/
Minimalistic tool holder - Fits a deburring tool with a 9,5mm head. Does probably not last forever. Minimalistic design over durability. PETG works fine for me. PLA will likely break fast. No supports. Fast print
Cap for NB1100 type deburring tools. Works with the standard BS1010 blades, but - thanks to the notch in the cap - it should fit all commonly available blade types. The cap is secured by two clip noses which grab the grooves at the upper…
There are a few holders like this already, but I always found them way too bulky as they tend to give space for way too many blades - when all you do is 3D printing, the wear on these is so little that I really don't need many at hand.…
-Added a debossed (Deburring tool) name for easy identification. -Extruded the retaining pins into solid pieces for A better hold. -Enlarged the locking pin support for strength. side note- might come back through and drop the retaining…
Fits this tool: https://a.co/d/cv72Ngo Removed the floating m3 holes so the magnet holes don't get all stringy if you print without supports, which I do. The design is based off of Filip Kolínský's Gridfintiy template, which is easier to…
Holds a 19mm diameter deburring tool. Uses a single skadis mount.
Heavily influenced by the design made by fillilutten on Maker World , but it didn't fit my deburring tool nor my grid. This was also made minimal so that you can print this without supports starting with printing the openGrid directional…
Inside Diameter 24.5 mm Tree Support needed for HSW connector Added chamfer at the end of HSW connector for easier insertion and corrected length to 10 mm.
A simple tool rack to store a deburring tool and its accessories. Specificly designed for a Ruthex deburrer, but also works for a Vastools set. I printed it with PETG, 0.4mm nozzle and 0.2mm layer height.
I remixed a remix (check out other models in the chain!) to remove screw and magnet holes as I don't use them I also remeshed the model to fix a hole or two It prints a bit faster with just a tiny amount less filament (:
A 1×1 Gridfinity tool holder for a Silverline 248844 Deburring Tool , 5 spare tips, an OLFA AK-1 Hobby Knife and a set of OLFA KB spare blades box . This model should also fit your standard X-Acto blade knife and other deburring tools.…
Mount for a generic deburring tool for IKEA Skådis pegboards. It holds the tool plus up to 12 replacement blads. It can be printed upside down without using any supports at all. I printed it with 0.2 mm layer height, 15% gyroid infill and…
Printed on my Ankermake M5C at with eSun Blue PLA+, 20% gyroid infill, with supports
Could not find a holder for my tool to keep my shop organized so decided to design one. t does not need any support
Additional slots for 10 additional bits. 1x1x6 Gridfinity size. Holds everything vertically for space efficiency. It has a stackable lip but is unuseable when the tool is in position. Edit: I did not realize that I had messed up the…
Keeps the blades in their plastic cases to avoid accidentally slicing your fingers open. 5-tab version is basically the original connector design but attached to case flush with the bottom so you can print with no supports. 1-tab version…
I have made a simple case for my deburring tool that fits with the gridfinity system. I designed this so that it only uses the standard 6x2 magnets. the magnets are not the strongest but they hold on tight enough. The magnets need to be…
I recently bought a deburring tool and it looks super dangerous to have an open blade like that, so I designed and printed a protector cap to safely store it!
China standard deburring tool holder
This is a cap for my deburring tool. Handle width is 12,1 mm. Printed in petg (there's a little flex in it) but any filament should be ok.
Holder for Light Duty Deburring Tool For The Removal Of Burrs On Wood, Plastic, PVC, Copper, Aluminium, Mild Steel & Stainless Steel, Metal & Non-Metal Tubing Or Pipes. Print, 20% PLA, 2 perimeters.
This is an original design for holding deburring tool on Skadis boards. It can be printed without support. It needs one Low Profile T-Clips by tchoupshop to fit flush, they come in two versions - one for black/white skadis boards, one for…
