442 models
I designed a replacement peg for my BLACK and DECKER Workmate portable workbench. The original part works just fine, however, I needed a few more as several have gone missing over the years. I tried to remain true to the original design…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
This is a drip tray replacement for a Black + Decker Electric Griddle (GD1611B). If your griddle looks similar to this exact griddle, this replacement may work for you with some slight editing! Print instructions It is recommended to…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
Object: Pressure washer Model/Type: BLACK&DECKER/PW1700SPM Part: Adapter click connect - connector between hose and pistol. Pressure hose information: YL max 160bar/16MPa/2320Psi max 60C/140F 2014.11 Pressure pistol: Annovi Reverberi I…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
I bought a Nidecker concept 2019 snowboard for this seeson, unfortunately someone hit the front of the board leaving a big scratch. Because al the snowboard bumpers in the store are either to bulky or has to be attached to the board with…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Print approx. €9.17–€11.21 excl. taxPreliminary estimate for PETGSource material: PET
Black&Decker Workmate WM825 - Stanley Deluxe 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Print approx. €8.46–€10.33 excl. taxPreliminary estimate for PETGSource material: PET
Spool Cover / Cap for Black & Decker GL540, GL545, GL550, GL555 For best results: Print with PETG/ABS or stronger material. PLA will also work but expect shorter life. Print with 100% infill Print with 0.1mm layer height
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant
This is the same holder as the original but with a multiconnect connector spaced to fit the opengrid system. I printed this in PLA with 0.2 layer height, 0.4 nozzle and organic supports on build plate just in case. Fits snuggly but not…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Bei den neueren Workmates werden sogar die Kunststoffteile eingespart: Der scharfkante Hebel zum Ver/entriegeln hatte früher eine Schutzkappe - Hier meine Version zum Nachrüsten. In gelb die Version für Stanley, orange für Black&Decker.…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Black & Decker Workmate WM550 Type 9 1 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for PETGSource material: PET
A double decker koozie, double walled for better insulation and capable of fitting two 12 oz cans. Load from the bottom
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE Jan 30th: Utility Case Carry Rack System for this…
Print with no Support and available in two versions (with or without hooks) also, Fits on Prusa Mini. Make it a bit taller if your printer can, specially if you plan to hang eyeglass. Cheers
This is a remix of https://www.thingiverse.com/thing:2576381 I've added counter-sunk screw holes to accomodate drywall screws. I would increase the print by 1% because the battery is pretty tight in the holder. But, if your batteries are…
This is a mount for Black and Decker powerconnect 18V batteries for storate on walls or shelves. two versions. one with holes in the wall because I like the look.
You can: Store just the battery Store battery and charger while charging Store just the charger when battery is in use (see images) Battery model LBXR20, charger model LCS1620B. Check images to make sure yours look the same. Updates…
Nobody else was dumb enough to waste time aligning holes on the backplate of a porter cable charger, let alone waste more time running shape optimization. Model may also work with some black and decker chargers, as it looks like they use…
This detailed 3D model of a modern double-decker coach bus is perfect for collectors, display pieces, or model enthusiasts. The design captures the sleek lines, realistic window layout, luggage compartments, and a true-to-life six-wheel…
I have 2 battery powered Black+Decker string trimmers, one with the EZ Feed button and one without that function. This cap fits both perfectly, with the EZ Feed working on the one. I printed this on an Ender 5 Plus with a .8mm nozzle, it…
Units in inches I created this model to safely and securely hold some 2-¼" tall stock against my router fence when making my own hardwood trim. My intention for this creation is that it's easy to swap parts and pieces if you want to…
Update 9-5-2020: There is a new model which includes a battery status indicator here: https://www.printables.com/model/408484-black-decker-20v-max-regular-or-extended-50ah-batt This is a collection of battery and battery charger holders…
When the handle of the Black & Decker Workmate breaks it is easily replaced with this model. I've used it for some time now and it works fine. It's probably not a good idea to print it with regular PLA. I've used Polymax PLA which is very…
Two-tier fishing storage table for small accessories. water drainage holes added. To connect, I recommend small screws with a nut and do not tighten hard. Attachment to position for 3 rods. Supports only for the small support cubes inside…
This is an adapter that will allow you to connect a Black and Decker random orbit sander to a 1-¼ Ridgid shop vac hose. I modeled this to connect to my Black and Decker BDER0600 5 inch random orbit sander, but there's a good chance it…
When the clamp of the Black & Decker Workmate breaks it is easily replaced with this model. I've used it for some time now and it works fine. It's probably not a good idea to print it with regular PLA. I've used Polymax PLA which is very…
Oriented such that no support will be necessary. There's also included an upright version if you insist on printing it with support. If you found this useful, it would bring me great joy to see your work - so be sure to share. :) Or, just…
BLACK and DECKER Orbital Sander Adapter for vacuum Description: This remixed-designed vacuum adapter is made for BLACK and DECKER orbital sanders (and non orbital too for example KA274E). It allows you to easily connect a vacuum cleaner…
Made this Black & Decker 20 volts battery holder so i can easily store them and so they can stay at reach. I made these models based on the 20 volts battery that came with my Black & Decker battery powered tools. The battery part# is…
Updates to ari.mandjelikian 's excellent model to add a few more options to help with storing smaller items. The three-tier version has small pegs to help it locate correctly on the lowest level box that will need some supports. The top…
Cordless tool battery adapter. Dewalt Battery to Black and Decker tools Extra hardware spade connectors wire fuse terminal M3 x10mm bolt & Hex nut 10k ohm resistor Prep spade connectors like this, flatten out the shoulders if you can…
Batteries taking up way too much shelf space…? Not any more! Countersunk the holes for a standard deck screw. Holes are centered for easy stud mounting. Compatible with 36V/40V Lithium Batteries. Model #s: LBX1540, LBXR36, LBXR2036,…
I made this model from scratch for my father-in-law, who broke his blocks and needed replacements. I've tried to track dimensions as best as it is possible. I'm not using the print, but my father-in-law was very happy with the results and…
My wife's new B+D Dustbuster didn't come with a wall hanger so I created one. Designed specifically for Gen 11 Hand Vacuum https://www.blackanddecker.com/products/hhvk515j00 Mounting holes are sized for #6 screws. I printed it upside down…
I want to make some mods for the Matrix drill body and I figured having a model of the basic drill body would be a good start to creating some custom attachments in addition to the matrix attachments that already exist. Let me know in the…
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
This is the drill model I designed it for. I can't guarantee it'll work with other models, but I've included the step file for easy modification. Mount directly to wall Just use the HSW version two screws Mount to HSW Use two M3 inserts…
This is a remix from @martona_1856646 to mount the Black & Decker Drill on my Honeycomb Storage Wall
Printed in two interlocking parts to make printing easier. When assembling, the parts need to be firmly pushed the last 1mm to lock them into place. Minimal supports on the build plate required for the small part printed with cross…
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ To be able to use a Black&Decker sander with the Makita batteries, I made this adapter. It is essential to have suitable connection to the contacts of the battery. Use “ Connector_Schablone_Inside.3mf ” and “…
Build video: https://youtu.be/EZE7LqASFk8 This will adapt a Black and Decker 20V max battery to a tool that takes the 18V nimh batteries. I provide templates for the brass parts that need to be cut from .8mm brass sheet. Their is a…
Actuator (plastic lever) for strimmer Black & Decker for GL280, GL30, GL301, GL340, GL420XC, GL423, GL425SC, GL530, GL540, GL544, GL545, GL550, GL555XC, GL560, GL560PXC, GL570, GL570C, GL580, GL580C, GLC13, GLC14, GLC120, GLC2000,…
This was modified to: have the charge indicator on the top mount to a pegboard wall print as a single part with less print time has small storage tray for driver bits/etc note on printing: I did use modifiers on the thinner parts to have…
I recreated the Nut and Bolt for the black and decker children's work bench so that my son had more of these to use. They match the original size and are compatible with the original Nut and Bolts. I printed with standard settings with…
Can be printed without supports i printed in prusament pccf and needed 100,5% for a snug fit sou you might want to scale it depending on your filament. the shaft might need some sanding for a perfect fit. PLA should be good to. i know…
I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…
This is a nice and sturdy soap dish that can hold two or three different soaps. Perfect for saving space in the shower if you share it with somebody that prefers many brands of soap! Materials : Main Body : ABS+ (so it can survive the…
These parts are modeled after the ¾" spring clamp from Black+Decker® and are 100% compatible. The models can be scaled up for larger clamps but through-hole diameters may not match original part dimensions in that case. One of my original…
Hodiny s rotujúcimi diskami, ktoré poháňa klasický motorček do hodin. Pod dlhé ozubené koleso a hore na disk s hodinami som použil podložku M5 a pod ploché dve ozubené kolesá som použil podložku M3. Ozubené koleso na motorček je nasadené…
As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.
Replacement foot for Black & Decker Workmate 301. Tight fit to ensure it doesn't slip off - can be pushed on or a couple of hits with a rubber mallet will nicely seat it. Printed in PLA with 20% infill and 0.2 layer height. Printed with a…
Battery mount for Black and Decker 20v batteries.
This a remix of B_3D's Black&Decker 18V (Old) Battery Holder https://www.thingiverse.com/thing:5021043 When I printed B_3D's model it near impossible to get the battery on the holder due to it being tight. I've modified the design so that…
Zunftzeichen Dachdecker
Planned on making one myself (one of those things on my list for a long time) but thought I would search internet first if someone made it already. Yush someone did and was able to remix it to my Gamma vacuum cleaner hose (30-31mm inner…
Remade the model from scratch to support larger batteries and added support for charger to rest on. Supports the following B+D 20V LI batteries 1.5 AH, 4.0 AH Smartech
This is a collection of battery and battery charger holders for the Black and Decker 20V MAX Batteries (both regular size and extended 5.0Ah batteries). These differ from the original models here (…
So, it's a small model of a Hong Kong double-decker bus, for the bus nerds out there, it's the E6M or an 11.3 meter-long E500MMC. (my apologies for bad print quality, I used some cheap filament I got off Taobao.)
Build video: https://youtu.be/9kTGytwcemQ This is an adapter to use a Black & Decker 20V MAX battery with the old blue Ryobi ONE+ 18V power tools. I don't know if it will work with other Ryobi tools. It's based on the battery receptacle I…
Bring the bustling atmosphere of a city street to your collection with this 3D printable STL model of a Double Decker Bus. This iconic city transport model is perfect for creating urban scenes, transport displays, or adding a classic…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Based (very loosely) on the photo of a current tram on the Seaton Tramway, East Devon. designed to cover the "Z Shorty" powered chassis, and is hollowed out accordingly. Print instructions Designed to print on an elegoo mars sla printer
I needed a smaller nozzle for my handheld vacuum, so I designed an adapter and a nozzle. The adapter should be printed with a flexible filament in order to have grip on the original vacuum nozzle, while the new nozzle can be printed in…
This adapter allows you to connect a vacuum hose to the dust port of a hand sander instead of using the canister. Little end fits Black+Decker's BDEQS300 1/4 Sheet Sander. Big end accepts a "standard" 1.25 inch vacuum hose. There is a…
This is a charger holder for Black and Decker 20V batteries. These tend to get scattered around since they are small, so I made this to keep them organized. These also include a cable management channel to keep that organized. There are…
I transformed the original design into a Honeycomb Wall Storage module that can accommodate 20V Black and Decker batteries. To make printing easier, I included Honey Comb clips on the back and flattened the base. Once I put it up, I will…
Made this Black & Decker 40 volts max battery holder so i can easily store them and so they can stay at reach. I made these models based on the 40 volts max battery that came with my Black & Decker battery powered tools. The battery part#…
Fun fact, there are 30 stairs from the ground to the top. The pictures don't do it justice, you need to print this model.
So I bought this handheld wireless vacuum cleaner and was not satisfied with the length of retractable nozzle. I needed it to reach in much deeper-narrow spaces. So I modeled this extender/adapter which allow you to make suction nozzle…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Hot glue or superglue your bowls to the rod as shown in the…
I shortened the model for the Dewalt battery by @mahatmaJman and made the top flat. With the connection profile from the Black and Decker adapter, by @TheOneTrueNic_299842 , I rezised both top and bottom parts and added the connection…
This model was deliberately made chunky to handle the weight of the cordless vacuum with the battery and attachments. Print it oriented with the back of the mount on the build plate , 15% infill with a 0.2mm layer height will work fine,…
Some plugs, like those used with DustBusters, can be difficult to handle because they lie flat against the device when inserted, leaving little space to grip them. This design solves that problem by using two rings. The smaller ring holds…
Vintage logos for Black & Decker, Delta, Dunlap and Porter-Cable. Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to…
Habe das Teil überarbeitet und es ist nun sehr stabil und absolut Maßhaltig. Material Jayo TPU Silk oder TPU für AMS (TPU 98A) 0,2mm Layerhöhe 0,4mm Düse Stützstrucktur ja
Wall mount for Black&Decker STC1840EPC The wall mount is in 2 parts (one for each handle) and 3 washers. There are 3 conical washers to prevent cracking of PETG when tightening the screw
Replacement feet for original Black & Decker Workmate
Remixed to hold actual size Dutch blitz cards, and 2 full decks for up to 4-8 players. The slide channels are still a little flimsy, but I don't feel like redesigning and printing another, so someone else can tackle that.
This is a replacement for the foot cap of the Black & Decker workmate. I have a very old workmate which used to belong to my grandfather, which I am using and maintaining as a very useful memento. It fits many of the Workmate models…
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
Print standing up, “Teardrop” holes should be good enough to print without supports. Mount with M4 bolt. Use Countersunk insert with M4 nut socket to be extra secure. I made one here:…
RIGID shop vacuum adapter for BLACK+DECKER 5 inch orbital sander model BDERO100.
The 'pointy' hook fits the handle perfectly, the flat one is for the front handle. Printing the hooks is very easy, no supports required.
Remix to include a hollowed out handle version.
A print in place double-decker bus. You will need to move the wheels a bit to loosen them, Make sure you've got good printer settings :) PRINT ON ITS SIDE Please feel free to remix this and I'll be really happy to see any makes! This was…
Designed to hold a Black & Decker RTX 3 rotary tool for stationary grinding, cutting, etc... UPDATE: Rotary holder rear (Rv_1) now has slots for attaching Velcro straps. Instructions Print the parts and use C-clamps to secure both pieces…
A Honeycomb Storage Wall-compliant mount for the BLACK&DECKER Cordless Electric Screwdriver . No supports needed, any material will work. Happy printing!
Here are four Plugins or Bits for the Smoby Black Decker Drill Toy you can see in the picture: Flat Blade Phillips Drill Nut Driver For a clean print i recommend to print them vertical with Brim and a little support (like in the picture).…
This is a reverse-engineered copy of the leg catch on my Black & Decker Workmate; it was a tricky one to draw! My Workmate has no identity markings but I bought it new in 1981/1982, and from recent research, I believe it to be a WM625…
Our family and friends play a card game called “Screw Your Neighbor” (similar to Phase 10) that starts with 10 cards in your hand and can sometimes get where you're almost holding a whole deck in your hand. Because of this, we've had…
This battery charger holder is designed to seamlessly integrate with your Ikea Skadis Pegboard. It allows you to securely mount your battery charger, providing an efficient storage solution and easy access for charging your batteries.
All additional parts for this model can be found at the previous remix https://www.printables.com/model/64586-rod-tube-and-screw-cutter-for-dremel
Citrus Juicer Black And Decker
Plenty of other brand battery mounts are available, but couldn't find one for me. So I made one :] I have two models. The main model reuses the two plastic security torx screws which can be screwed directly into the model. Take care to…
A TS80 portable "wireless" soldering iron stand for use with black and decker batteries. The orange and black battery is a original one, the big one is a cheap knock off (40 Eur.) Super handy for use in the field. The battery clip can be…
I designed this for my B&D 120v corded hedge trimmers, though it can probably be used for alot of things. It has two vertically positioned screw holes, so it can be mounted to a wall stud using two #9 pan head wood screws. I printed mine…
Used connector from the original B&D battery and connector from spare Einhell charger. Consider add some voltage regulator/convertor or some rectifier diodes. STLs are multiple parts objects.
printed .6 nozzle .4 layerheight. prusaslicer mk3s
Black & Decker Tool (NiCD A1718) - Xfinity (Aldi) battery adapter I got a pole hedge trimmer skin with a NiCD battery, I have lots of Xfinity batteries and prefer to use those. 6mm Spade terminals and some wiring required. Pretty self…
Strimmer Spool Cover Black & Decker GL5028 I suggest to print it vertically for greater tear resistance of the two side grafts Support: Yes Material: PETG
