Search results: detergent

Sort order

294 models

P
PrintablesPeterV

Laundry Detergent Cup Drain - remodeled

This was inspired by the original Laundry Detergent Cup Drain and modeled from scratch in Fusion 360. As is, it fits the new Tide bottle, but the model is fully parametric and therefore can be adjusted to fit other detergent brands. It…

Downloads
9,574
Likes
1,646
Rating
4.85
P
PrintablesBen Dover

Detergent Cup and Cup Holder

(WARNING) ONLY IMAGE IS AI NOT THE MODEL!!! IMAGE WONT ALWAYS SHOW MODEL AS IS, SO THERE MIGHT BE SOME MISTAKES ON THE COVER IMAGE NOT THE MODEL!!! Best use on

Downloads
4,874
Likes
1,360
Rating
4.89
P
Printablesmoviebrain

Detergent cup hanger v2

Designed in Fusion, a hanging shelf for the detergent measuring cup of a 150fl oz Tide (or similar) detergent container to catch drips and easy hold while measuring. It should fit any bottle of this type where the ring it sets onto is…

Downloads
4,519
Likes
1,183
Rating
5
P
PrintablesHobb3s

Laundry Detergent Cup Drain - New Tide Cup

I just made a very slight modification to an already fantastic design by davwilso. The new cup that Tide supplies has a larger diameter so it no longer fit in the original design. I I just added a wider lip at the top to contain the new…

Downloads
2,687
Likes
239
Rating
4.53
P
PrintablesThesBer

Detergent Wash Cup 25/50/75/100 ml

🧼 Detergent Wash Cup – Clean & Easy Powder Scooping! This detergent scoop was designed to make powder dosing simple and mess-free! With its ergonomic handle, you can easily grab and scoop detergent without spills or sticky packaging.…

Downloads
2,323
Likes
554
Rating
4.96
P
PrintablesKernel Sanders

Laundry Detergent Cup Drain

This design stores the laundry detergent cup for Tide and Gain brand liquid laundry detergent containers and drains excess leftover soap back into the container. Single print design (Print in Place) Fits North American Tide and Gain 4.43L…

Downloads
2,188
Likes
163
Rating
4.7
P
Printablesdimo414

Detergent Spout Cup Holder (Parametric)

This is a parametric model for detergent brands that lie on their side and dispense out of a spout. The model clips onto the spout and provides a tray to catch drips and store the detergent cup. See the comments in the OpenSCAD file for…

Downloads
1,432
Likes
197
Rating
4.86
P
Printablesmoviebrain

Laundry detergent measure cup hanging shelf

Check out my v.2 over at https://www.printables.com/model/1352969-detergent-cup-hanger-v2 Same fit, better looks! Fantastic original design! Thanks scubasonar! I printed the original to fit a 150 Fl Oz Tide dispenser. I needed to sand out…

Downloads
1,074
Likes
118
Rating
5
P
PrintablesBatman3D

Laundry detergent scoop *NO SUPPORT!*

I needed a scoop for some powder detergent, couldn't find one I liked so designed my own. Prints without support in the orientation shown on the print bed picture. I used PETG and it's holding up nicely. Thanks to some lovely printers…

Downloads
890
Likes
85
Rating
5
P
PrintablesEScvn54

Powder Laundry Detergent Dispenser ***Updated Version - no hardware required!!!***

In our house, we loathe wasting money on liquid detergents that cost as much as a box of powdered detergent, and clean half as many loads. This dispenser was designed to hold our detergent in a closed box to alleviate some of the humidity…

Downloads
674
Likes
139
Rating
4
P
PrintablesECF

Detergent Cup Holders - Fusion 360

There are many detergent cup holders available for download, but I couldn't find any specifically for the Great Value (Walmart) brand detergents. The large cup holder also works with some Gain, TIde and possibly other brands of detergent.…

Downloads
636
Likes
296
Rating
5
P
PrintablesMadcamper

Laundry Detergent Holder and Cup

This is an elevated laundry detergent holder and cup. Holds a regular or enlarged sized detergent container. Printed on a prusa MK3S+. It's fairly large so you must have a decent size bed. You could scale it down depending on your bed…

Downloads
591
Likes
93
Rating
4.67
P
Printablessurvival88

Liquid detergent transfer connector / Waschmittelflaschen-Verbinder

(deutsche Beschreibung weiter unten) English: Description: This practical adapter allows you to connect two detergent bottles to cleanly and completely transfer the remaining detergent from a nearly empty bottle into a (nearly full) one –…

Downloads
547
Likes
430
Rating
4.88
P
Printablesfloano

Liquid detergent tray for washing machine

To simplify the printing process, it is recommended to print the tray with the backside facing down, aligning all internal channels for easy printing. With comparable size to the original tray that came with our Samsung machine. The…

Downloads
534
Likes
68
Rating
5
P
PrintablesSteveS42

Laundry Detergent Cup Drainer

Update Use this remix for the larger 237 fl. oz. jugs. _______________________________________________________ I found this design about 3 years ago on Thingiverse by davwilso. https://www.thingiverse.com/thing:2748680 I liked the idea…

Downloads
503
Likes
77
Rating
5
P
PrintablesJeroen3

Detergent Powder Dispenser

A rotary dispenser to dispense a consistent amount of detergent. About 17g, as recommended for the detergent I use. It works best when mounted to the wall, inside a kitchen cabinet for example. Print instructions It prints without…

Downloads
494
Likes
109
Rating
5
P

Detergent TiltMake Drainer

A simple, no-frills 3D-printed stand that holds laundry detergent bottles at an angle to reduce waste—easy to design, fast to print, and solves a common everyday problem with minimal material.

Downloads
481
Likes
190
Rating
5
P
PrintablesSteveS42

Laundry Detergent Cup Drainer Larger Tray and Screw-on

After reviewing a few comments, it became clear to me that the new jugs not only had a larger diameter screw-on, but the cup was larger too. My wife likes to use the original small cup and I am guilty of not thoroughly investigating the…

Downloads
446
Likes
63
Rating
4.83
P
PrintablesZappa

Laundry detergent scoop

I really hate doing the laundry! I never use the right amount of detergent, most of the time the detergent forms large lumps which are hard to scoop out, making a mess of the kitchen floor. Well, not any longer! I have modeled this…

Downloads
436
Likes
62
Rating
5
P
PrintablesThosa

Dosing spoon for detergent - Dosierlöffel für Waschmittel (#0116)

EN: My wife asked me to design a dosing spoon for detergent. This should have exactly 54ml. (1.5 times the old one) DE: Meine Frau bat mich einen Dosierlöffel für Waschmittel zu entwerfen. Dieser sollte exakt 54ml haben. (1,5 mal der Alte)

Downloads
415
Likes
32
Rating
4.67
P
PrintableseSeL

Detergent Spoon

I remixed the spoon of nkitani with longer handle and in a 25ml and 30ml version. Printing of the first layers was not so easy due to the overhangs of the radius. This is why I made a version with 0.8mm cutted off the bottom. Now it is…

Downloads
391
Likes
37
Rating
4.92
P
Printablesk1rdm

Laundry Detergent Cup Drain Back Funnel

Over time, laundry detergent collects and solidifies in the bottom of the measuring cup. It wastes detergent, and makes your measurement inaccurate over time. This Laundry Detergent Cup Drain Back Funnel keeps from developing a detergent…

Downloads
381
Likes
61
Rating
4
P
PrintablesThunderbird332

30ml Detergentscoop // 30ml Waschmittel dosier Löffel

I designed this spoon, since the detergent I bought did not come with a scoop. It is pretty accurate to have a volume of 30ml when filled to the brim. The design is stable and strong and can be printed lying on the top side without…

Downloads
381
Likes
14
Rating
5
P
PrintablescodenameT.A.P

Laundry detergent cup holder

Print with the flat side that has holes facing down, it's set up that way for an easy support-free print. Otherwise use support for best results.

Downloads
376
Likes
52
Rating
5
P
Printableslromandine

All Laundry Detergent Stand and Cup Holder

I did not like any of the wedge designs from the laundry solutions contest so I made my own specifically for “All Free and Clear” detergent. It fits that jug very snugly so there is no rattle if your machine vibrates or anything. The cup…

Downloads
361
Likes
55
Rating
4.5
P
Printablespryde4114

Laundry Detergent Powder 50g Scoop (No Support)

Laundry detergent powder scoop, holding approximately 50g of poweder Created such that it can print without support Design has an angled front scoop surface, with markings denoting that the ¼, ½ and ¾ points, for ease of reading and…

Downloads
359
Likes
46
Rating
5
P

laundry detergent spigot lever

no supports needed print in one piece

Downloads
356
Likes
128
Rating
5
P
Printableskdub

Parametric Laundry Detergent Cup Holder

Fusion 360 file included. I didn't like other designs because some of them were a single piece and others took a lot of filament. You should be able to change the parameters in the file, I'm not sure how well the model will hold up if…

Downloads
334
Likes
47
Rating
5
P
PrintablesLeftcetio

Laundry Detergent Cup Drainer

This is a minor remix because the original did not fit my All detergent bottle. The outside diameter measured over the bottle threads is 37.5 mm on mine. I rounded off the sides, made the lip around the edge taller and reinforced the…

Downloads
334
Likes
42
Rating
0

Detergent cup holder

A hanging laundry detergent cup holder that's easy to print. Customize in just two simple steps! Step 1 - Measure Step 2 - Customize & Download Open the OnShape Model , enter the dimensions, and download:

Downloads
333
Likes
80
Rating
5
P
PrintablesBill

ALL detergent drainer

Drainer for ALL detergent cup to prevent the sticky buildup from forming in the cap. This threads on in place of the vent cap. and prints as 3 parts, the support blocks have a ~.1 mm gap between them and the actual object, use variable…

Downloads
331
Likes
86
Rating
0
P
PrintablesN8finch

Laundry detergent cup holder for Tide and Gain Jugs

This is a remix of a Tide and Gain jug/bottle detergent cup holder. Mine recently broke so I added some supports so it could be printed in PLA or any other filament than TPU. It didn't need supports. I printed it on my Elegoo Centuari…

Downloads
327
Likes
30
Rating
5
P
PrintablesBleo3

Laundry Detergent Bottle Lever for limited hand movement.

This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…

Downloads
312
Likes
229
Rating
4.67
P
PrintablesAryser

Liquid Laundry Detergent Measuring Cup 100ml

Print upright. PETG or PLA. 21.6.2025:I moved the text to the left and right side. It is easier to read for left and right handed people. Other laundry helps Please finde also my scoop for detergent powder:…

Downloads
299
Likes
29
Rating
5
P
PrintablesRackron

Universal/Dishwasher Detergent Scoop - 10g

Problem: Recently our dishes coming out of the dishwasher started tasting like our dishwasher detergent. First we were using pods, even after switching to a different solid detergent in powder form after a couple of rinses we had the same…

Downloads
286
Likes
19
Rating
4.5
P
PrintablesSteveS42

Laundry Detergent Cup Drainer Larger

The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…

Downloads
277
Likes
24
Rating
5
P
PrintablesMcLovin

Laundry Detergent Packet (Tide Pod) Dispenser and Storage Bin

So you never have to deal with opening up that annoying child-safe lid again. Simply grab one and throw in the washer. Able to be printed on a 180mm x 180mm printbed. I am able to hold 84 (generic store-brand) Tide Pods at once in the…

Downloads
275
Likes
25
Rating
0
P
Printablesbjorncs

Samsung Washing Machine Insert for Liquid Detergents

Samsung washing machine insert/flap/cover for liquid detergents. Fits better to the tray than the original item that was included with the machine. Compatible with my Series 9 model (WW90J5426FW) and likely Series 5+ / 7 / 8. See…

Downloads
264
Likes
25
Rating
5
P
PrintablesMike

Laundry Detergent Spigot Lever

This single-piece attachment makes dispensing laundry detergent effortless — ideal for anyone who finds the small rubber button on top of the spigot hard to press. It’s simple, quick to print, and works exceptionally well. Unlike other…

Downloads
261
Likes
36
Rating
4.67
P
PrintablesLSL66

Zásobník a dávkovač pracího prášku - Detergent Powder Container & Dispenser

Detergent Powder Container & Dispenser Practical container with integrated mechanical dispenser for powder detergents. Enables clean, accurate, and repeatable dispensing. Suitable for placement on a washing machine, shelf, or in a…

Downloads
257
Likes
42
Rating
4.25
P
Printablesnightfox90

Detergent cup holder (All)

This device snaps onto the laundry detergent jug to hold the cup under the spout. It also helps catch drips or spills to keep it off your floor. I use “All” brand detergent in the 141 oz jug, so I designed it for that. I don't know if it…

Downloads
232
Likes
28
Rating
5
P
Printableszerink

Detergent Drip Cup Holder

Better suited for LA PARISIENNE, a brand here in Quebec.

Downloads
224
Likes
35
Rating
5

Laundry Detergent Cup Drain (Longer)

I really liked the original model by @Kernel Sanders , but I have a cabinet above the shelf where we have the detergent bottle and the bottom of the cabinet is lower than the cup. So, I extended the neck of the drain to get the thing out…

Downloads
223
Likes
30
Rating
0
P
PrintablesBlake Haas

Laundry Detergent Cup Holder

Saw these cup-holders / drip catchers on amazon. Figured id model one up. One improvement I wanted to make which I think is absolutely necessary is to have the top part be TPU to allow for a snug fit on the detergent and to allow for some…

Downloads
223
Likes
44
Rating
5
P
PrintablesGeorge-Corrigan

Detergent Cup Tray

This is a tray to hold the laundry detergent cup during and after use. This fits over the opening where the cap would attach to. I have tested this and it seems to fit most larger detergent containers. -- This prints on its back. Brim is…

Downloads
219
Likes
60
Rating
5
P
PrintablesMichael Hetu

print in place detergent pump

works with tide and gain and Kirkland branded-all free and clear not tested other detergent bottles

Downloads
218
Likes
73
Rating
5
P
PrintablesMike

Laundry Detergent Cup Drain w/Backstop - v4.1

Laundry Detergent Cap Drain Accessory – Latest (and Hopefully Final) Design After experimenting with various detergent and fabric softener containers, I’ve settled on a more configurable, future-proof design. This version combines proven…

Downloads
215
Likes
23
Rating
4.8
P
Printablesmuchtall

Simple Customizable Laundry Detergent Soap and Fabric Softener Drip Cup Holder Tray

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Wanted to design a detergent cup holder in OpenSCAD so that anyone could customize to their particular brand of detergent. The defaults in the file…

Downloads
212
Likes
19
Rating
5
P
PrintablesKorbi Muster

Laundry Powder / Liquid / Detergent Dosing Cup

This is a dosing cup for laundry detergent (e.g. for powder or liquid) that I created. Common dosing amounts are marked within the print. It is also helpful for scratching out the last rests from a big powder box. Please consider a small…

Downloads
211
Likes
30
Rating
5
P
Printablesfloano

Siphon liquid detergent tray for washer (v2)

Siphon liquid detergent tray for washer Two tray dimensions Normal Short/wide See Narrow tray for Blender file for easy modification to fit your washing machine. Printing No supports needed. Print backside down as shown below Example…

Downloads
208
Likes
14
Rating
5
P
PrintablesMisterED

Spoon for laundry detergent

Spoon for laundry detergent Improved version of https://www.thingiverse.com/thing:3394707

Downloads
206
Likes
18
Rating
4.5
P
Printables3DFORGE

Detergent Cup Hanger

This Detergent Cup Hanger is designed for practical laundry organization. It snaps onto standard wire shelves or pipes and provides a round tray to hold your detergent cap or measuring cup right below the spout of your detergent bottle.…

Downloads
200
Likes
33
Rating
5
P
PrintablesJohannes M.

Washing agent/detergent container

This detergent container is a two part print. The lid can be printed seperately. This can be used to print it in a different color. Therefore, different powder detergents (whites, color, etc.) can be color coded with different lids. Print…

Downloads
198
Likes
33
Rating
5
P
Printablesweberyap

Detergent Cup Holder

The ones sold online are all foldable versions, and I think it’s more reassuring to have them all in one piece.

Downloads
179
Likes
28
Rating
5

Detergent spoon 90ml

This is just a simple spoon for detergent and other small powders and fluids. This is an easy print and can be printed without support material, enjoy! Print Settings Rafts: No Supports: No Resolution: Doesn't Matter Infill: Doesn't…

Downloads
178
Likes
13
Rating
5
P
PrintablesMartin_au

30ml scoop for detergent

Laundry/kitchen detergent scoop. Holds 30ml. Has a nice sturdy handle and sharp corners for getting into corners.k

Downloads
173
Likes
15
Rating
4.75
P
PrintablesPrinterly3D

Detergent/Softener drip tray cup holder

this thing attaches around the spout of the large 1.32 Gallon jugs of detergent/softeners and also holds the cup

Downloads
173
Likes
14
Rating
5
P
Printablesapanzerj

Remix of Detergent Cup Holder with Larger Ring

This is a tweak to the original model. You can use this if you have a slightly larger detergent cup.

Downloads
173
Likes
46
Rating
4.8
P
PrintablesBrad Rigsby

Laundry Detergent Scoop

Humid laundry rooms turn powdered detergent into a big brick in the box. The flimsy scoop that comes in the box is no help and makes a huge mess. I went through several iterations before finding the right balance of size, strength, and…

Downloads
154
Likes
12
Rating
5
P
PrintablesDaveNoCash

Powder Scoop with Built-In Funnel V2 | Coffee, Preworkout / Creatine, Detergent Powder, Beads

If you print this model, please share pictures! Your feedback is highly valued. Consider following & liking if you enjoy my work! --- I have no idea to why I created this model, I even made a second version of it, well maybe you can try…

Downloads
149
Likes
21
Rating
1
P
PrintablesChristoph

Detergent Powder Cup 50ml

In general people use to much detergent for their washing machine. About 50ml are sufficient for everyday runs. Prints without supports.

Downloads
138
Likes
17
Rating
5
P
Printablesbamfengineer

Laundry Detergent cup holder with drip tray

Holds your laundry detergent cup for most gallon sized containers with a spout, I always hated the drips after I finished filling the cup so I designed a removable drip tray so that's no longer an issue.

Downloads
133
Likes
22
Rating
0
P
PrintablesKIJO

Laundry Detergent Nozzle EZ Lever

Laundry detergent nozzle attachment, designed to make dispensing laundry detergent and fabric softener more convenient. Print each piece separately, then assemble the lever, base, and axle. Place the device over the nozzle and secure in…

Downloads
131
Likes
50
Rating
0
P
PrintablesRosie T Knine

Liquid Detergent Riser

In addition to the cup holder, the riser has a 4 degree incline to help the detergent flow out of the bottle. Printed on a Bambu X1C with PETG. 0.28mm Extra Draft 3 Walls 10% Adaptive Cubic Infill

Downloads
131
Likes
16
Rating
5
P
PrintablesManfredMan

Flüssig Waschmittel Kugel - Liquid detergent ball

Die Kugel kann ohne Stützen gedruckt werden. Die Drucktemperatur sollte hoch gewählt werden, damit der Druck so dicht wie möglich ist. Meine finale Kugel habe ich mit 100% Füllung gedruckt, um das eindringen des Waschwassers zu…

Downloads
129
Likes
6
Rating
5
P
PrintablesAryser

Laundry Detergent Washing Ball 150ml

In printed with PETG with 0.2mm nozzle. Print without support. Check and clean the printed object properly to prevent damaging textiles. Other laundry helps measuring cup for liquid detergents:…

Downloads
126
Likes
9
Rating
4.5
P
PrintablesLeo

Clip with dispenser for laundry detergent powder

A practical 2-in-1 solution – seals the detergent bag and allows precise dispensing through a built-in screw cap. Perfec

Downloads
125
Likes
35
Rating
5
P
PrintablesAriel 3D

Detergent cup

Simple detergent cup and a holder that I have designed.

Downloads
125
Likes
10
Rating
5
P
PrintablesMGyula

Dishwasher detergent tablet dispenser Fusion 360

Easy print without support. It is easy to adjust the dimensions of the dispenser to your tabs using the Fusion 360 file or the step file.

Downloads
124
Likes
67
Rating
5
P
Printables5n8ke

Laundry Detergent Cup

This is a small laundry detergent cup designed for quick printing with soft curves and an interesting handle. With a fine tip for dosing even small amounts accurately and getting at the last bits of detergent in the corner of the big…

Downloads
123
Likes
12
Rating
5

Measuring Cup for Detergent

This detergent measurement cup has three measurement divisions for e.g. water hardness or level of soiling of the clothes. small: 25g/40ml medium: 60g/90ml large: 120g/150ml Print settings Height: 0.2mm Infill: 15% Support on build plate…

Downloads
122
Likes
32
Rating
5
P
Printablesmoviebrain

minimal rotating laundry detergent drip catcher (no cup)

Printed in petg, faces offset .15mm each, and may seem too loose at first but will snug up for a friction-fit when placed on the detergent dispenser. Designed to fit Tide 150-170fl oz containers and or similar brand/sizes. The opening is…

Downloads
111
Likes
29
Rating
0
P
PrintablesOld Lady

Detergent Scoop

My first attempt with PLA was not stable enough for me, so I printed it again with TPU for AMS. This made it perfect, and the slight flexibility makes it very easy to handle. It's also great for potting and repotting plants. The model is…

Downloads
111
Likes
16
Rating
4.5
P
Printablesk4rl_k

Laundry Detergent Cup Holder

Remixed to work with pla but stronger filament is suggested. Original design petg was recommended. .2 layer height 3-5 walls At least 30% infill for pla. Use supports

Downloads
110
Likes
18
Rating
0
P
PrintablesJeffFaer

Laundry Soap Cup Holder for All detergent

I updated the screw on the original model to fit a 1.2 gallon all detergent bottle.

Downloads
105
Likes
10
Rating
5
P
PrintablesSoundDoc

Kenmore Whirlpool Dishwasher Detergent Dispenser Assembly 9744542 Release Latch

After our dishwasher detergent door latch broke I looked to replace the latch, only to find that the part was only sold as a assembly... A $105 assembly.... So... 30 minutes of design and 30 minutes of printing later it was fixed, and if…

Downloads
102
Likes
10
Rating
0
P
PrintablesNusNus

35ml detergent measuring cup

I needed a detergent cup to measure 35 ml so made this. The cup can fit about 60ml of liquid but I made a line at 35 so it is easy to see when there is enough detergent. The good thing with this cup is that it doesnt spill. No drops on…

Downloads
101
Likes
13
Rating
5
P
PrintablesAHoopyFrood

Detergent Cup Holder for Wire Racks

Universal laundry detergent cup holder, based on the linked source design and re-designed for wire racks. Made for racks with 1/4" DIA horizontal wire and a 7/8" gap between vertical wires.

Downloads
101
Likes
11
Rating
0
P
Printablesnkitani

Spoon for laundry detergent

[English] When the laundry detergent in the gusseted bag was getting low, it was difficult to scrape it out with a spoon, so I made a spoon with a pointed tip using a 3D printer. It is much easier to use than the regular spoon I had been…

Downloads
98
Likes
10
Rating
5
P
PrintablesDaveNoCash

Powder Scoop with Built-In Funnel V1 | Coffee, Preworkout / Creatine, Detergent Powder

If you print this model, please share pictures! Your feedback is highly valued. Consider following & liking if you enjoy my work! --- Key Features: convenient 1 tablespoon or 15ml scoop --- Printing Notes: Print from inside to outside.…

Downloads
94
Likes
13
Rating
0
P
PrintablesBillV

Tide detergent cup holder

Fits newer tide bottles Printed in petg

Downloads
93
Likes
8
Rating
5

Small shelf mounted liquid laundry detergent cup holder

Easy to build from PLA, orient it on it's side and set to tree support for floating areas. Use 3 wall layers for a little more strength in the springy section.

Downloads
92
Likes
17
Rating
0
P
PrintablesED3D

EZ Detergent Dispenser

This detergent dispenser is designed for ease and efficiency, allowing folks to dispense detergent with just one hand. Its ergonomic design features a stable base, a comfortable grip surface, and a user-friendly push mechanism or lever…

Downloads
91
Likes
28
Rating
0
P
PrintablesAD White

Laundry Detergent Sheet Holder

I made this holder for Earth Breeze laundry detergent eco sheets, but it might work with other brands too. Wall mounted using 3M double sided mounting tape. Print upright, no supports. This is my first original design so feedback is…

Downloads
90
Likes
12
Rating
5
P
Printablesmikhart

Laundry Cup/Spoon for detergent dosing

A simple cup/spoon to dose detergent. There are fine lines inside to indicate different dosages (in milliliter). So far only printed upside down with supports enabled (could maybe work without), but better finish inside would be reached…

Downloads
90
Likes
6
Rating
0
P
Printablesnathan.o2

Laundry detergent holder

This is a laundry soap dispenser holder if you don't have a shelf to put it on. This was designed for the larger Kirkland (Costco) brand dispenser. Category: Household

Downloads
89
Likes
4
Rating
0
P
PrintablesKoli

Detergent measuring spoon 30ml, graduated

Just a detergent spoon, made with multicolor printing in mind, but indented text will be readeble in 1 color also

Downloads
87
Likes
13
Rating
3.33
P
PrintablesCptZipp

Detergent Scoop

Print without support, handle angle is 45° 20ml and 65ml have their size printed in the bottom. The 100ml does not, so you can scale it to your desired size. Formula for getting the linear scaling factor (or multiply with 100 to get…

Downloads
86
Likes
11
Rating
5
P
Printablesjosue freitas

Um suporte para 3. esponjas , detergente e alvejante.

Um suporte para 3. esponjas , detergente e alvejante com drenagem embutida, projetado para colocar na pia 🧽.

Downloads
83
Likes
8
Rating
0
P
PrintablesFroeForge

Laundry Detergent Sheet Holder

Should hold approximately two packages of laundry detergent sheets cut in half, specifically the ones from EarthBreeze.

Downloads
80
Likes
26
Rating
5
P
PrintablesLanc3d

Laundry Detergent Cup

Cup for liquid laundry detergent with pour spout. 3 level markers inside cup. Add a length of wire to form a loop to hang from the dispenser valve. This project was an effort to improve on the cups supplied with the detergent, which are…

Downloads
80
Likes
9
Rating
0
P
Printablesmgranger114

Universal Fit Laundry Detergent Cup Holder

Not all liquid laundry detergent spouts are the same size, and not all cups are either, So, you need a detergent cup holder that fits various size spouts and cups. Also, a one piece holder that clips onto the spout and has the cup holder…

Downloads
78
Likes
18
Rating
5
P
Printablesniget2002

Slightly Larger Detergent Cup Drain

This is a remix of the original. The original cup drain holder was not large enough to fit the Tide detergent cups we use. I used the original designer's step file to create a larger drain area. All print requirements match the original…

Downloads
78
Likes
8
Rating
5
P
PrintablesSteveS42

Transfer Tubes (for All brand detergent)

This is a system for draining All® detergent jugs. As these bottles are large and cumbersome with an offset lid, the upper bottle is held at an angle to ensure complete draining and stability. Assembly The straight tube goes on the…

Downloads
76
Likes
27
Rating
5
P
PrintablesBombastus Hands

Washing Powder Cup / Laundry Detergent Cup

So here's a quick one: I needed a cup for washing powder and two different units to measure. One marking is for 60 ml and the upper one is for 140 ml. Easy. Handy. Nice. :-) Print Settings Printer Brand: Anycubic Printer: All-metal Mega…

Downloads
75
Likes
5
Rating
0
P
PrintablesHallo7

indesit flüssigwaschmittel einsatz / indesit liquid detergent insert

Einsatze für die Verwendung von Flüssigwaschmittel für Indesit-Waschmaschinen Erstellt mit Onshape:…

Downloads
73
Likes
2
Rating
0
P
PrintablesDAMorganWilkins

Washing Machine Detergent Tray

This is a large liquid detergent tray, with a syphon system, for use inside the detergent drawer in a hoover washing machine. It was designed for a Hoover DXC C49B3, although it is likely that it will fit many other models (as they use…

Downloads
72
Likes
7
Rating
0
P
PrintablesXargas

Detergent Doser / Waschmitteldosierer

Detergent Doser / Waschmitteldosierer

Downloads
72
Likes
8
Rating
0
P
Printablesthe 3d whiz

detergent spill catcher

print in pla best with petg

Downloads
71
Likes
11
Rating
0
P
PrintablesHappy Thanos

Laundry detergent cup

Searched for one and didn't find anything, so I made one. No support needed if you print bottom up. I used white filament as that's all I had but it would look cool in clear filament. Infill at 20%.

Downloads
69
Likes
7
Rating
5