Motocycle Swingarm Spools (removable) / Diabolo
For M10 hex screx.
- Downloads
- 34
- Likes
- 6
- Rating
- 0
59 models
For M10 hex screx.
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
This is a model of a 4.5 mm diabolo pellet used in compressed air pistols and rifles. It is based on a real RWS R10 pellet and is designed in mm. You may not see it when you open it in your slicer because it's small. Once you upload it in…
Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm
The diabolo airgun pellets are scaled to 1 inch and can be scaled down to the desired size as needed. For use in PCP airguns only, never use lightweight pellets in in spring powered airguns.
While I designed several parts for my 9mm Airgun, I need to model some types of ammunition. Those are not for printing but if you need to make a design, you can use the STEP files for place into your design. The Models are created by…
Billy is the most mischievous and evil worm of the Gang, even more than Donald! Better to stay away from him. The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and to brighten up your…
Yes, it's yet another annoying gift card box! I designed this from scratch in Blender and added a few features I felt were missing from other designs. This gift card lock box features two layers of annoyance before its recipient can…
Print in PLA Stackable Sliding lid 9mm for e.g. AEA HP Max
Original Upload by https://www.thingiverse.com/_iw0gz_ A project of the Proteo Explorer Team https://www.facebook.com/proteoteam/ Printer brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 50 Filament…
I created this model to replace my sisters old Diabolo toy, which gave us some very fun memories and laughs. You will need to tie some plastic like string to the ends of the sticks(typically sold in hardware stores) and some glue to hold…
Put the 4.5 mm ball in to a hole. Inventor sources included.
Sehr hilfreiches Magazin zur Aufbewahrung von 10x10 Stück R10 Diabolos (Bleihütchen für das Luftgewehr). Ideale Entnahme der Diabolos vor dem Laden des Gewehrs im Wettkampf. Das Klappmagazin kann mit einem persönlichen Logo 60x60 mm (max.…
Print in PLA Stackable Sliding lid 7,62mm e.g. for FX Dreamline …
a simple wall mount for diabolospellets ammo
This model does not include the clamp, on the plus side you can get whatever clamp will fit your becnhrest. When benchrest shooting with an air rifle you often want to attach the ammunition box to the actual benchrest, so you don't have…
Hi everyone, here the diabolo I designed from scratch. However, it may look like others. This is the one I made with freecad to illustrate the Mount for diabolo part. Enjoy. Regards Froggy Category: Games
9 mm Diabolo for Airguns with hole for lead ball (4,3mm, but 5mm also fits) for added weight just heat after some uses to get them to grip rifling again made for TPU to get more than -1- use print 25 to justify turning on printer advised…
Druckt mit drei Wänden und ohne Support. Die Pellet Dose wird von vorne in die Halterung geklipst. Die 20mm Version passt für JSB, die 22mm Version passt bei UMAREX und H&N.
As i often shoot with airguns with friend i came up with this idea, why not create a single box with place for 5 different ammo types in it so you dont have to take all the single ammo boxes with you. So i custom made this one with name…
Hi everyone. here a design wich is not attended to be new. It is very simple and may probably look exactly the same as others. But I just made it from scratch. A separate mount system to be put along the wheel of the diabolo will be…
A tray for storing pre selected diabolo 4.5mm munition for competition purpose. Tray fits into standard boxes (160 x 80 mm)
TL;DR The Diabolical Cube is a three-dimensional dissection puzzle composed of six different polycubes. Polycubes are shapes formed by joining individual cubes together face to face. In the case of the Diabolical Cube, these six polycubes…
This is the Diabolical Cube, a sort of 19th century precursor to the Soma Cube. Earliest known reference is an 1893 book by “Professor Hoffmann”. There are six polycube pieces composed of from two to seven small cubes, and you have to put…
Print the caps with TPU for a longer lifespan for the diabolo, as other filaments tend to break quite easily. You can print the middle part with your desired filament. Make sure you use a suitable screw that fits the hole; it has a…
This little helper is an alternative to the 100 pellet containers. It makes fun working with it. You fill a couple pellets into the upper part of the loader, mix the pellets and soon you have 10 pellets in the appropriate holes.During…
Vymodeloval jsem si box na diabolky a broky který se dá na opasek, bylo to z toho důvodu že když jsem střílel, tak mě nebavilo si pořád chodit pro střelivo a takhle je to hezky při ruce, tak se to snad bude hodit i někomu dalšímu. Boxy co…
This is a 7-piece burr with very unusual pieces. Unlike most burrs, the hard part is figuring out the assembled form. I don't include a photo of the assembled puzzle, as it is a spoiler. The assembled puzzle interlocks nicely and will not…
This is a remix of a model made by @elliesaurus_2358786 . i was annoyed by the tiny feet at the bottom, making it impossible to print face up. i have removed the feet. the model is otherwise not changed. This is no fault of Ellie, it's…
[DISCLAIMER: I do not have printed this yet. only the bearing part... I have to rework this part. I need to get longer needles for the bearing otherwise it will not align. So I am pretty sure the design will not work. but I will work out…
nub holder madbull shark mod diabolo
Klemme um ein versehentliches Öffnen der Diabolo-Box zu verhindern. Für RWS-Büchsen, für andere muss evtl. angepasst werden.
If you have old Diabolo with broken plastic part as i have, you can print this model and make new one. The metalic parts on photo are used from old one. In STL file is only one part - you have to print it twice . easy to print PETG…
Ho creato il personaggio di Diabolik in stile funko famoso del fumetto
Hello. I designed this Diabolo crown case for my Walther CP99. Printed in PLA without supports with a fill rate of 15%. For the assembly it will take 2 countersunk screws M3x8 or 3x10 no longer. one M5x80 socket head cap screw with…
Corchete de diábolo Hola Se trata de un sistema multiusos que sirve para unir y organizar la gran mayoría de tejidos y se puede emplear en calcetines, camisas, trapos o cualquier textil de grosor mediano. Dependiendo del tamaño en la que…
Yoyo + Diabolo + baseball holder
My brother beautfully renovated his bathroom with attention to detail. Stock heater pipe covers just did not match, so I created this one, with a 15.5mm hole. Easy job, using the snap connectors feature of Prusa Slicer. Kudos to the…
Onshape model: https://cad.onshape.com/documents/066fd45e7e31bbdd7a8df6aa/w/4856f9d67df3d188b72776bc/e/f6523e39d90762a8bac8b655
My metal diabolo sticks are over 30 years old but still going strong. They came with plastic grommets whose holes eventually widened out irregularly and I never found a supply of replacement grommets. Finally with a 3D printer I can make…
DISCORD SERVER: https://discord.gg/PmNhTSpWCt MY WEB PAGE: https://la3emedim.fr/ 🐟 BenchyNodon Diabolis – The Devil’s Depths Boat A cursed hybrid between the legendary 3D Benchy and the Cyprinodon diabolis , the rare Devil’s Hole pupfish.…
Hi everyone, here a mount to be printed along with my diabolo design (or not). You need to make sure that the size of the internal rim is the same as your diabolo. You may want to fix it with your diabolo. You need two rims and 8 small…
Hallo zusammen, heute habe ich eine Wandhalterung für ein Diabolo entworfen. Einfach mit 2 Schrauben an der Wand zu befestigen. Viel Vergnügen ;) Hello together, today i designed a Wall-mount for a Diabolo. You need 2 screws to fix it on…
Hi everybody, The idea of the mount is to add extra fonctionnalities to any flexible diabolo (needs to be however printed sothat it is fitting the diabolo part). I improved the first mount I proposed to add a bit of flexibility by using…
The Hobby King Diabolo is an older EDF RC Jet that has been out of production for some time. A friend recently had the canopy come apart in flight and the resulting damage was not repairable. I created this model so he could keep flying…
Un’action figure ispirata allo stile iconico di Diabolik, modellata per ottenere una resa pulita, elegante e fedele allo spirito del personaggio. Il modello è ottimizzato per la stampa FDM, con geometrie solide, supporti minimi e…
3D Printed Diabolo 🎯 A diabolo (often called a Chinese yo-yo) is a classic juggling and circus prop. It consists of an hourglass-shaped spool (the diabolo) suspended on a string connected to two hand-held sticks. By moving the sticks…
I printed in PLA and TPU, PLA broke after dropping it from 20m
Ein Kreisel für Diabolo Üben Tipp: Nehmt eine dichtere Füllung
Print the caps with TPU for a longer lifespan for the diabolo, as other filaments tend to break quite easily. You can print the middle part with your desired filament. Make sure you use a suitable screw that fits the hole; it has a…
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
I'm glad to present you the Dragon Snake 🐉🐍 Easy to print without Supports, just slice the file and get started The Joints are strong and sturdy. You get a creature with fully articulated body & this Snake / Dragon has a Crystal Tail.…